How to create hyperlink on one word inside a paragraph?
I have a paragraph of text coming from the database as a CLOB, and I need to add a hyperlink to one word in the paragraph. I have done this for an entire field, but not one word inside the paragraph. Any ideas on how to do this?
The output file is a PDF. The version of Oracle Reports is 10g.
Thanks in advance!
Thanks for your time Mona.
Without modifying the Table Interface I solved my problem.
Earlier I mentioned that the exceptions were not highlighting when created in BEx. the reason is I gave negative % range -10 to -1000.
But when I changed that range as -1000 to -10, It worked fine. I created the same exceptions for all the 7 queries in BEx. So all those execeptions are automatically highlighted the result in Portal.
Cheers
POPS
Similar Messages
-
How to remove hyperlinks in a word document
how to remove hyperlinks in a word document
Go to your "Insert" drop down menu.
Select "Hyperlink", near or at bottom.
You will get this dialog box:
Look at the lower left corner... see the button "Remove Link"?
Click on it...and hit the "OK" button in the lower right...
Since this was a Word question, and not a Mac Pro question, it would have been better to post it here http://www.msofficeforums.com/word/ -
Any advise on how I can turn just one word in a sentence upside down, as opposed to all flipped
Could someone advise on how I can turn just one word in a sentence upside down, as opposed to all flipped. Im trying to make one word stand out whilst designing in a text sentence window.
Thanks In advanceIt’s best to type your sentence and then click on the hand tool to deselect the Type tool
Click the type tool again and type the word you wish to rotate (it will be on a separate layer.
Select the layer with the full sentence and add a layer mask.
Choose the brush and paint with black to mask the word in the sentence.
Select the layer above with the single word and use the move tool to rotate and position it. Then save. -
How to create hyperlink on column.
Hi all,
its very urgent.
I have two pages first page like header level and secound page like lines level.
in first page having requestid lov,find,create buttons and advance table region.
secound page having only advance table region with add another button and save button.
in first page, once click on the create button one requestid(header) is generated in header leval and at the same time that requestid move to secound page requestid column and user select the application name and responsibilityname and user click on the add another row button it ll add one more row with same requestid and here user again enter application name and resp name and click on the save button the data insert to two different tables.header information insert to one table and line information insert to another table.
here my problem is in first page having requestid lov and find button. the user click on the find button all the requestids displayed in advance table region(this is only header information).once user select particular requestid and click on that requestid, it ll displays particular requestid line information to next page.
how to create link on requestid column.
how to achive this plz help me.
ThanksHi Mukesh,
Thanks for replay.
here my requirement is i have two pages in firstpage having requestid lov,go button and table region.
once click on the GO button it ll display all the requestids(only header table information) these requestids are having hyperlink.
one requestid(header) having multiful requestids(lines)
once click on the particular requestid and go to next page here displays the line information.
so i created one destinationURL, and in secound page CO process request i wrote below code.
so plz check once.
In CO:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
String employeeNumber = pageContext.getParameter("requestID");
System.out.println("this ia my link requestID:"+employeeNumber);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
Serializable[] parameters = { employeeNumber };
System.out.println("this is my link serizable requesid:"+ employeeNumber);
am.invokeMethod("initDetails", parameters);
in AM:
public void initDetails(String employeeNumber)
RequestAccessDetailsVOImpl vo1 = getRequestAccessDetailsVO1();
System.out.println("my emp number AM:"+employeeNumber);
vo1.setWhereClause("REQUEST_ID = :1");
vo1.setWhereClauseParams(null); // Always reset
vo1.setWhereClauseParam(0, employeeNumber);
System.out.println("my emp number AM1:"+employeeNumber);
vo1.executeQuery();
once i click on the requestid(hyperlink) in home page that requestid move to secoundpageCO and AM also.
plz check the output.this output generated OC4J server.
this ia my link requestID:12590
this is my link serizable requesid:12590
my emp number AM:12590
my emp number AM1:12590
But did not displays the line information in secoundpage
plz helpme.
Thanks
Edited by: its urgent on Mar 19, 2012 10:26 PM -
How to create Hyperlink dynamically
Hi All,
In my application , iam using one table , one of the field in that table is input field,
when i entered data in that field at runtime, automatically that field value should become hyperlink, to show another table.
is it possible to do, if possible please help me in this how to create field dynamically.
regards,
sushHi Sushma,
What I get is that at runtime, you will fill the input field with some value & wish to have the field changed to a link.
Adding to what Armin has said, keep the input field as it is. Add a new column in the table, create the TableCellEditor of type LinkToURL (if it is a URL value) or LinkToAction (if some value).
For LinkToURL type, set the 'reference' property to the same context value attribute as the input field.
For LinkToAction type, set the onAction event where you call the appropriate code.
You can also set the 'text' property as Link or bind it to this context value attribute as well.
Hope this works.
Kind Regards,
Nitin
Edited by: Nitin Jain on Mar 25, 2009 9:14 AM -
Is there a way to add a Hyperlink to ONE WORD in a large group of text?
I am a beginner with adobe muse but I can't seem to find a way to make one word in a group of text a hyperlink. Do I have to make a separate text box then make that a hyperlink? I did try that but upon export the one word would be in a different spot on the site. Does this make sense? Thank you for any help!
Hello,
If you're not able to make a single word a hyperlink, you must be selecting the text frame and applying the hyperlink to that. To make a single word hyperlink, click repeatedly on the text frame till you see "Text" in the selection indicator towards the top left of your screen in Muse and are able to select the particular text that you wish to hyperlink. When you have it selected apply the hyperlink to it. Check this out: http://jingsite.businesscatalyst.com/jing/2013-09-19_0023.swf
Doing this shouldn't cause the link to change position when exported, you may still want to check if there is a "Link Style" applied to the hyperlink that is causing issues.
Hope this helps.
Cheers
Parikshit -
How do I select a specific word inside a TextFrame?
I want to highlight a word inside a TextFrame, but I'm only able to select the entire frame.
I have tried something (and several related version) like this:
var textFrames:com.adobe.indesign.TextFrames = activeDocument.textFrames;
for(var i:int = 0; i < textFrames.length; i++){
var t:com.adobe.indesign.TextFrame = textFrames.item(i);
var texts:com.adobe.indesign.Texts = t.texts;
for(var j:int = 0; j < texts.length; j++){
var text:com.adobe.indesign.Text = texts.item(j);
app.select(text);
This selects the entire content of the area, instead of just a specific word.
How do I proceed? ThanksTo clarify: I dont know which TextFrame the string is within - hence i look through all frames.
I have tried implementing the suggested ideas - mainly doc.findText() as:
app.findTextPreferences.findWhat = word;
var w:Object = doc.findText();
The problem is the findText() returns object of all types, and I cannot figure how to get it working. Below is my current solution, working like a charm, though probably not the most efficient implementation.
public static function select(word:String):void{
var app:Application = InDesign.app;
var activeDocument:Document = app.activeDocument;
if (!activeDocument){
return;
var textFrames:com.adobe.indesign.TextFrames = activeDocument.textFrames;
for(var i:int = 0; i < textFrames.length; i++){
var t:com.adobe.indesign.TextFrame = textFrames.item(i);
var words:Words = t.words;
for(var j:int = 0; j < words.length; j++){
var selector:Word = words.item(j);
if(selector.contents.toString() == word){
selector.select();
return; -
Need Help, how to create more than one rectangle from one button in one stage of canvas
Dear Guys,
I has problem to create more than one rectangle canvas from one button. here my role to create :
1. I create input size with textfield
2. I click button called "submit query"
3. My web will create a rectangle with specific size.
My problem come when I click again the button, my old rectangle has been remove than my new rectangle has created.
My question is : how I can create more than one without delete/remove the old I was created?
Here my Code :
<head><meta http-equiv="Content-Type" content="text/html; charset=utf-8" /><link rel="stylesheet" type="text/css" media="all" href="css/style.css"><script src="kinetic-v4.7.2.min.js"></script></head> <body><label>Length</label><input name="panjang" id="panjang" type="text" size="5" maxlength="5"><br> <label>Width</label><input name="lebar" id="lebar" type="text" size="5" maxlength="5"><br> <label>Height</label><input name="tinggi" id="tinggi" type="text" size="5" maxlength="5"><br> <label>Packing Name</label><input name="nam_pac" id="nam_pac" type="text" size="5" maxlength="5"><br> <input name="submit" type="submit"> <script defer> var stage = new Kinetic.Stage({ container: 'container', width: 943.5, height: 254.10 }); var layer = new Kinetic.Layer(); var rectX = stage.getWidth() / 2 - 50; var rectY = stage.getHeight() / 2 - 50; var group = new Kinetic.Group({ draggable: true }); var box = new Kinetic.Rect({ x: rectX, y: rectY, width: <?php echo ($_POST['panjang']/10)/1.3; ?>, height: <?php echo $_POST['lebar']/10; ?>, //fill: '#00D2FF', stroke: 'blue', strokeWidth: 2 //draggable: true }); var simpleText = new Kinetic.Text({ x: Math.round(box.getWidth() / 2), y: Math.round(box.getHeight() / 2), text: '<?php echo $_POST['tinggi'].'/'.$_POST['nam_pac']; ?>', fontSize: 30, fontFamily: 'Calibri', fill: 'blue', }); // add cursor styling box.on('mouseover', function() { document.body.style.cursor = 'pointer'; }); box.on('mouseout', function() { document.body.style.cursor = 'default'; }); group.add(box); group.add(simpleText); layer.add(group); stage.add(layer); </script></body>
this is my printscreen may help you to help me :
thanks before to help me
Regards,
Prabowo.It's work Ken, but if I modify your code into my code.
error again. they say like before (...is undefined)
May You want to check my code
<?php
include('pinambung.php');
?>
<!DOCTYPE HTML>
<html>
<head>
<meta charset="utf-8">
<title>GI Loading Plan Maker</title>
<meta name="viewport" content="width=device-width" />
<link rel="stylesheet" type="text/css" media="all" href="css/style_2.css">
<script src="js/kinetic-v4.7.2.min.js"></script>
<script src="js/CalendarPopup.js"></script>
<script src="js/jquery-1.10.2.js"></script>
</head>
<body>
<header class="w" id="header"> <!--Header Area -->
<img src="images/headers.jpg" width="100%" height="100%" />
</header><!--End of Header Area -->
<nav class="w" id="nav"><!--nav Area -->
<?php include('top.php'); ?>
</nav><!--End of nav Area -->
<section class="w" id="main"><!--section Area -->
<section id="content">
<article>
<h2>Customer Info</h2>
<form id="myForm" action="insert.php" method="post">
<label>Customer Name :</label><input name="cs_name" id="cs_name" type="text" size="25" maxlength="50">
<br>
<label>Date of Shipment :</label><input name="shipment_date" id="shipment_date" type="text" size="10" maxlength="12" > use format : YYYY-MM-DD
<br />
<label>Container Name :</label><input name="con_num" id="con_num" type="text" size="10" maxlength="12">
<label>Revision :</label><input name="revision" id="revision" type="text" size="5" maxlength="5"><br />
<label>Prepared by :</label><input name="prepared_by" id="prepared_by" type="text" size="25" maxlength="50">
<button id="saveinfo">Save As DB</button>
<button id="saveall">Save As Image</button>
<button id="print" onclick="window.print();return false">Print</button>
</form>
<span id="result"></span>
<script type="text/javascript" src="js/insert.js"></script>
</article>
<br /><br />
<article>
<h2>Packing Info</h2>
<label>Container Type :</label>
40' HC<input name="con_type" type="radio" id="con_type" value="40hc">
40'<input name="con_type" type="radio" id="con_type" value="40">
20<input name="con_type" type="radio" id="con_type" value="20"><br />
<input name="loadstan" type="button" value="Create Container" id="isSelect">
<button id="removecon">Remove Container</button>
<br />
<label>Length</label><input name="panjang" id="panjang" type="text" size="5" maxlength="5">
<label>Width</label><input name="lebar" id="lebar" type="text" size="5" maxlength="5">
<label>Height</label><input name="tinggi" id="tinggi" type="text" size="5" maxlength="5">
<label>Packing Name</label><input name="nam_pac" id="nam_pac" type="text" size="20" maxlength="55">
<input name="loadstan" id="loadstan" type="button" value="Load Standard Packing" onclick="window.open('spk.php', 'winpopup', 'toolbar=no,statusbar=no,menubar=no,resizable=yes,scrollbars=yes,width=300,height=400');">
<input name="submit" type="submit" value="Create Box">
<button id="remove">Remove Box</button><br />
</article>
</section>
<aside id="sidebar">
<label for="layer-to-delate">Select a layer to delete or rotate</label><br />
<select id="layer-to-delete" size="14"></select><br />
<input id="delete-layer-button" type="button" value="Delete layer">
<input id="rotate-layer-button" type="button" value="Rotate box">
</aside>
<section id="content2">
<div id="container">
</div>
<script defer>
function radians (degrees) {return degrees * (Math.PI/180)}
function degrees (radians) {return radians * (180/Math.PI)}
function angle (cx, cy, px, py) {var x = cx - px; var y = cy - py; return Math.atan2 (-y, -x)}
function distance (p1x, p1y, p2x, p2y) {return Math.sqrt (Math.pow ((p2x - p1x), 2) + Math.pow ((p2y - p1y), 2))}
var stage = new Kinetic.Stage({
container: 'container',
width: 943.5,
height: 254.10
var layers = new Array();
function addCont(){
layer2 = new Kinetic.Layer();
switch ($('input:radio[name=con_type]:checked').val()){
case '40hc':
var box_con = new Kinetic.Rect({
x: 10,
y: 10,
width: 1190/1.3,
height: 2300/10,
stroke: 'black',
strokeWidth: 2
var TextCon = new Kinetic.Text({
x: 10,
y: 240,
text: 'Container Size 40 HC (11900mm X 2300mm X 2550mm)',
fontSize: 12,
fontFamily: 'Calibri',
fill: 'green',
layer2.add(box_con);
layer2.add(TextCon);
stage.add(layer2);
break;
case '40':
var box_con = new Kinetic.Rect({
x: 10,
y: 10,
width: 1190/1.3,
height: 2300/10,
stroke: 'black',
strokeWidth: 2
var TextCon = new Kinetic.Text({
x: 10,
y: 240,
text: 'Container Size 40 (11900mm X 2300mm X 2250mm)',
fontSize: 12,
fontFamily: 'Calibri',
fill: 'green',
layer2.add(box_con);
layer2.add(TextCon);
stage.add(layer2);
break;
case '20':
var box_con = new Kinetic.Rect({
x: 10,
y: 10,
width: 580/1.3,
height: 2300/10,
stroke: 'black',
strokeWidth: 2
var TextCon = new Kinetic.Text({
x: 10,
y: 240,
text: 'Container Size 20 (5800mm X 2300mm X 2250 mm)',
fontSize: 12,
fontFamily: 'Calibri',
fill: 'green',
layer2.add(box_con);
layer2.add(TextCon);
stage.add(layer2);
break;
function addRect() {
layer = new Kinetic.Layer();
var box = new Kinetic.Rect({
x: 10,
y: 10,
width: +(($("#panjang").val()/10)/1.3),
height: +($("#lebar").val()/10),
stroke: 'blue',
strokeWidth: 2
var group = new Kinetic.Group({
draggable: true,
snap : true
var boxLabel = $("#nam_pac").val() + "/H : " + $("#tinggi").val();
if (($("#panjang").val() && $("#lebar").val()) != 0) {
var simpleText = new Kinetic.Text({
x: 10,
y: 10,
text: boxLabel,
fontSize: 12,
fontFamily: 'Calibri',
fill: 'red',
} else {
var simpleText = new Kinetic.Text({
x: 10,
y: 10,
text: '',
fontSize: 12,
fontFamily: 'Calibri',
fill: 'red',
group.add(box);
group.add(simpleText);
layer.add(group);
stage.add(layer);
layers.push(layer);
$("#layer-to-delete").append("<option>Layer " + boxLabel + "</option>");
function deleteRect() {
if($("#layer-to-delete > option").length < 1) return;
var i = $("#layer-to-delete").prop("selectedIndex");
layers.splice(i,1)[0].destroy();
$("#layer-to-delete > option").eq(i).remove();
function rotateRect() {
if($("#layer-to-delete > option").length < 1) return;
var i = $("#layer-to-delete").prop("selectedIndex");
layers[i].rotateDeg(30);
layers[i].draw();
$("#delete-layer-button").click(function(e) {
deleteRect();
$("#rotate-layer-button").click(function(e) {
rotateRect();
$("input[type=submit]").click(function(e) {
addRect();
$("#isSelect").click(function () {
addCont();
$("#removecon").click(function () {
layer2.destroy();
$(window).keypress(function(e) {
if(!$(document.activeElement).is("label")) {
if((e.keyCode || e.which) == 46) {
layer.destroy();
if((e.keyCode || e.which) == 35) {
layer2.destroy();
document.getElementById('saveall').addEventListener('click', function() {
stage.toDataURL({
callback: function(dataUrl) {
window.open(dataUrl);
}, false);
</script>
</section>
</section><!--End of section Area -->
<footer class="w" id="footer"><!--footer Area -->
Copyright <a href="login.php" target="_new">©</a> 2013, <a href="http://omhanggar.com" target="_new">created</a><a href="http://intranet.guentner-asia.com" target="_new"> by PT. Güntner Indonesia </a>
</footer><!--End of footer Area -->
</body>
</html>
thanks again before,
Prabowo -
How to CREATE SEQUENCE in one table
dear all
the one thing i want to know when i use CREATE SEQUENCE in one table like this and then at that table
CREATE SEQUENCE oproduct_sequence
START WITH 1 INCREMENT BY 1
nocache
create table oproduct(
tname varchar2(20) not null,
tid int default oproduct_sequence.nextval
the system indicat that i cannot use this way to create table , so i really want to know how can i achieve this method
becuase when i want to insert inot table oproduct only use
insert into oproduct valuse('aaaa');
and the result like
aaaaa 1
bbbb 2Actual name is before insert trigger. Some examples are listed below:
Example Number 1 ...
create sequence product_seq start with 1 increment 1
create or replace trigger product_insert before insert for each row begin
select productseq.nextval
into :new.product_id
from dual;
end;
Example Number 2 ...
How to create an autoincrement field in a table with a sequence ...
SQLWKS> create table bob(a number , b varchar2(21));
Statement processed.
First create a sequence
SQLWKS> create sequence x ;
Statement processed.
Then create the trigger.
create trigger y before insert on bob
for each row
when (new.a is null)
begin
select x.nextval into :new.a from dual;
end;
Example Number 3 ...
First create a sequence:
create sequence emp_no_seq;By default it increments by 1 starting at 0.
Use its values when inserting data into the table:
insert into t_emp values (emp_no_seq.nexval, 'Joe Black');~ Madrid. -
How to create hyperlinks in Acrobat 9 Pro?
Hi everyone,
Is there a way to create hyperlinks from within Acrobat 9 Pro? If so, can you let me know how? I am having a hard time finding out how to do so.
Thank you in advance for your help:)
ChristineI did this from the advanced menu to make all hyperlinks work. All I got were boxes around my links that are not clikcable to the web page.
Now I cannot undo this. -
How to create hyperlink using form
if a user click on button then
oulook express open for sending mail but i want to create hyperlink on it automatically.
actually when user click then a word file created on server i want to hyperlink this file the file name is my form serial_nowhen i click on button outlook express is opening know and i can send text on body through forms
i need it to send hyperlink on outlook express so i can open document through this link which is on outlook express file -
How to creat pdf from microsoft word
How do I edit pdf files
You don't. Thats why they are saved as .pdf files to prevent changes.
You can create PDF files form Word on windows, by printing to a PDF Virtual Printer (you can google this).
You can create PDF files on a Mac by selecting Print, then clicking PDF on the print screen.
You can create PDFs on an iOS device with a third party app like 'PDF Printer for iPhone' -
How to create hyperlinked text in F1 help of a particular Data Element.
Dear Guru
I have encountered an issuse regarding to create hyperlinked text in F1 help of a particular Data Element.
For Example what i am trying to do is ---
If you open a particular data element say "ATNAM" in se11 you will found the below documentation available for ATNAM -->>
DE ATNAM
Text
Characteristic Name
Definition
Name that uniquely identifies a *characteristic*.
>> The "characteristics" comes in hyperlinked bluecolor and if we press this it linked to below --- >>
Definition: characteristic
Classification (CA-CL)
Property for describing and distinguishing between objects, such as length, color, or weight.
Profitability Analysis (CO-PA)
I am able to make 1st part of the documentation using SE61.
But I am not able to make Hyperlinked part of that documentaion .
please show me some way to develop this
Thanks & regards
Saifur RahamanHI,
you can give the hyperlink in the documentation by going to the path below
MENUBAR ----> INSERT -----> TEXT -----> HYPERTEXT.
this will solve the issue
have a good day
regards
sarves -
How to create hyperlink in PDF?
how do i create a live link in a pdf using Acrobat XI Pro?
Hi Steve,
I figured this out a couple of hours ago...however, the link does not appear with the usual underlined bright blue text, it appears with a blue rectangular box around the text, or invisible, which doesn't let the reader know that it is actually a link.
Can you tell me how to create the "old fashioned" typical link that we are all used to seeing in bright blue and underlined?
Thank you for your response
Norma -
How to create more than one SID in .bash_profile
I Want to create more than one SID in bash_profile without disturbing oracle's default SID i.e orcl and create database with new SID?
you can create SID.env file or try to use . oraenv
eg:-
$ cat uat1.env
export ORACLE_BASE=/u01/db/db10g
export ORACLE_HOME=$ORACLE_BASE/10.2.0
export PATH=$ORACLE_HOME/bin:$PATH
export ORACLE_SID=UAT1
export TNS_ADMIN=$ORACLE_HOME/network/admin
$ . uat1.env
$ echo $ORACLE_HOME
/u01/db/db10g/10.2.0
$ echo $ORACLE_SID
UAT1else
$ . oraenv
ORACLE_SID = [UAT1] ? UAT1
Maybe you are looking for
-
I am trying to do a clean restore of my iPad (currently running 4.2) and when I click on the restore button, I get the following message: +There was a problem downloading the software for the iPad "jiPad". The requested resource was not found.+ I can
-
How can I sort bookmarks in plain folder?
any way to simply gain access to the bookmarks in a plain windows folder so I can sort them in a manner that makes sense to me just like I used to do with Internet Explorer instead of having to learn this whole miserable procedure?
-
Question about the heat sinks in these models
Hey all, Can anyone tell me about the heat sinks used in these model laptops? Here are my questions: Are they made from pure copper? What is inside the tubes that run between the processor covers and the fan? Is it just air? or something else? Is the
-
Is There a Standard or Common JNI to the (POSIX) C Driver Interface?
I have the source code in (POSIX) C for an RS422 Serial Driver. I've been asked to create the JNI for using the 8 driver interfaces: install() open() read() write() ioctl() select() close() uninstall() This seems like something that enough people wou
-
This may be easy but I am new to this so here it goes. I am trying to find if a string can be found in a mysql database field. The following will only find exactly match <CFQUERY DATASOURCE="databasename"> SELECT mycontact, userid FROM m