How to create index for articles&products in ATG+Endeca application?

Hi.
I'm novice in Endeca.
How to create ATG+Endeca application in which exists search by articles (created in Experience Manager) and by products (from BCC ATG).
And how to index together products and articles?
Where can I read about it?
Thanks.

Are you planning to create articles in ExpManager OR the content will come from some other system and you just want to manage the pages to display the content in Exp Manager?
On a high level:
If it is case #1 you have to integrate ATG & Endeca and write some cartridges for managing the content.
If it is case #2 you have to integrate ATG & Endeca and modify the auto generated pipeline to pull in your content from the other system.
Pankaj.

Similar Messages

How to create index for a column of a view

Hi,
I have created view for a table and then i am trying to create index for a column of that view. i am using the query "CREATE INDEX index_name ON view_name (col)". but Mysql is showing error like "view_name is not a base table".
How can i do that......

As mentioned this is a java forum not a mysql forum, but as I know the answer - you can't create an index directly on a view in mysql.

How to create index for particular table in R3

Hi
My load is taking too much time and it leads to process over due error. Does creating indexes on table in r3 side will solve this issue? If so how can we find out on which table does this particular data source depend. I went to maintain extract structure and findout only one table is supplying data for this data source.
Is there any other factors depend to solve this.
Thanks
kk

Hi,
it will depend on the table.... Having an index created will speed up the loading but slow down the insert therefore slowing some process perhaps...
May I ask which table it is? And which fields would you need to index?
Are you sure that bottleneck is located in R/3? Analyze your loading time in the monitor and see if this is really the case.
Otherwise you can create index for a table in Tx SE11; first check if an index is not already created...
hope this helps,
Olivier.

How to create index for knowledge article IN CRM 7.0

Hi,
I want to delete the index for Knowledge Article, create again and do the complete compilation.
In webui, Iam able to delete the Index and do complete compilation and Iam not sure how to create the index.
can anyone pl guide
Regards
BABU

Hi,
Once u created a data source. go to respective application component which u have assigned ducring creatinon of DS in RSO2 and right click on it and use replicate metadata.
a popup with options 1. as data source
2. as 3.x data source will come u select 2 one here and go on.

How to create index for Telecom large table

Hi ,
I'm working on DB 10G on REHL 5 for telecom company with more than 1 million recorded per day , we need to speed the query result ,
we know there are many types of the INDEX and I'm need a professional advice to create a suitable one ,
many of our queries depend on the MSID ( the MAC address of the Modem ) column ,
Name           Null Type
STREAMNUMBER        NUMBER(9)
MSID                VARCHAR2(20)
USERNAME            VARCHAR2(20)
DOMAIN              VARCHAR2(20)
USERIP              VARCHAR2(16)
CORRELATION_ID      VARCHAR2(64)
ACCOUNTREASON       NUMBER(3)
STARTTIME           VARCHAR2(14)
PRIORTIME           VARCHAR2(14)
CURTIME             VARCHAR2(14)
SESSIONTIME         NUMBER(9)
SESSIONVOLUME       NUMBER(9)
.please any help ,

really i have 3 queries for the subscriber activity like (usage details , the date of bundle start the the total of the download , he's working out of bundle or not )
and any of the subscribers can check those queries at any time thorw web ,
select nvl(min(substr(a.starttime,1,8)),0) Service_Start_Time, nvl(sum(a.sessionvolume),0) Total_Traffic_KB
FROM aaa_bill a
where msid='84A8E46E929D'
and starttime >=(select max(fee) FROM aaa_bill
where msid='84A8E46E929D' and accountreason=5);and the expected result is
service_start_date totoal_traffic_KB
20120225                   440554the MSIDs examples
(84A8E46E7F43,
84A8E46E7A82,
84A8E46E7C84,
84A8E46E7CBF,
also i have this query ,
select
substr(nvl(
(select nvl(starttime,'0') as starttime
from (
select nvl(starttime,0) starttime,sum(sessionvolume) over(partition by msid order by starttime) sum1
from aaa_bill
where msid='84A8E46E90BC' and starttime >=(select max(fee) FROM aaa_bill
where msid='84A8E46E90BC' and accountreason=5))
where sum1>=44987000
and rownum<2)
,0),1,8) Reached_45GB
from dual;and this one ,
select min(to_char(to_date(starttime,'yyyymmddhh24miss'),'yyyy-mm-dd hh24:mi:ss')) "Accounting Start Time",
max(to_char(to_date(curtime,'yyyymmddhh24miss'),'yyyy-mm-dd hh24:mi:ss')) "Accounting Stop Time",sum(sessiontime) Duration1,
TO_CHAR (TRUNC (SYSDATE) + NUMTODSINTERVAL (sum(sessiontime), 'second'),'hh24:mi:ss') hr,
sum(sessionvolume) Traffic
from aaa_bill
where msid='84A8E46E78EF'
and starttime >=(select max(fee) FROM aaa_bill
where msid='84A8E46E78EF' and accountreason=5)
group by correlation_id
order by min(starttime);

How to create iBase for thrid pary Products

Hi,
Can you please tell me how to create iBase for third party products like Vertex, uPerform
Thanks

Hi,
Check this link
Service Desk: Ibase for Service Messages for non-SAP systems
Hope this helps.
Feel free to revert back.
-=-Ragu

How to create Rfc for EP system in Solution manager

Dear experts,
I am doing ChaRM configuration for my EP system ( java only).
I also configured CTS+ successfully but we want to integrate this with Chram in solman.
I have done all configuration according to standard doc for ChaRM.
But when creating project from solar_admin it is giving "   NO RFC for DEP system"
so please suggest me how to create RFC for java system in Solution manager.
thanks in advance
dhiraj

Hello,
You need to setup an ABAP communication client and system, that's done through the TMS settings:
For source system:
- CTC                                              1
- CTS_SYSTEM_TYPE                          JAVA (others for a MDM system)
- NON_ABAP_SYSTEM                          1
- COMMUNICATION_SYSTEM:              (SAPSID of the ABAP communication system (e.g. the domain controller))
- NON_ABAP_WBO_CLIENT                    (Client of the ABAP stack on which the Transport Organizer Web UI (CTS_BROWSER) is activated and will run.)
- WBO_GET_REQ_STRATEGY                 TAGGED
- WBO_REL_REQ_STRATEGY                 MANUAL
For quality and production Java system (target systems):
- CTC                                              1
- CTS_SYSTEM_TYPE                          JAVA (others for a MDM system)
- NON_ABAP_SYSTEM                         1
- COMMUNICATION_SYSTEM:                 (SAPSID of the ABAP communication system (e.g. the domain controller))
- DEPLOY_WEB_SERVICE                       CTSDEPLOY
- DEPLOY_DATA_SHARE:
When this is done correctly, you will see the fields ABAP communication system and client populated in SMSY.
When ChaRM needs to operate on the non ABAP systems, it will take the RFCs for the communication system and client.
Best regards,
Miguel Ariñ

How to create indexes on ODS ?

Hello friends ,
Need some help .
Could any one please let me know how to create indexes on ODS ?
How Indexes are useful on ODS ?
Thanks in advance
Regards

Dear Akshay,
Below is the information about indexes and there creation for ODS.
You can search a table for data records that satisfy certain search criteria faster using an index.
An index can be considered a copy of a database table that has been reduced to certain fields. This copy is always in sorted form. Sorting provides faster access to the data records of the table, for example using a binary search. The index also contains a pointer to the corresponding record of the actual table so that the fields not contained in the index can also be read.
The primary index is distinguished from the secondary indexes of a table. The primary index contains the key fields of the table and a pointer to the non-key fields of the table. The primary index is created automatically when the table is created in the database.
You can also create further indexes on a table in the ABAP Dictionary. These are called secondary indexes.Under Indexes, you can create secondary indexes by using the context menu in order to improve the load and query performance of the ODS object This is necessary if the table is frequently accessed in a way that does not take advantage of the sorting of the primary index for the access.
The database system sometimes does not use a suitable index for a selection, even if there is one. The index used depends on the optimizer used for the database system. You should therefore check if the index you created is also used for the selection (see How to Check if an Index is Used).).
Creating an additional index could also have side effects on the performance. This is because an index that was used successfully for selection might not be used any longer by the optimizer if the optimizer estimates (sometimes incorrectly) that the newly created index is more selective.
The indexes on a table should therefore be as disjunct as possible, that is they should contain as few fields in common as possible. If two indexes on a table have a large number of common fields, this could make it more difficult for the optimizer to choose the most selective index.
Leaving content frame.
With Regards,
Prafulla Singh

How to create indexes using CREATE TABLE statement

Hi,
Can anyone please tell me how to create indexes using CREATE TABLE staement? This point is part SQL Expert exam (1Z0-047) and please guide me to use which books for this particular exam.
Thanks in advance.

Can anyone please tell me how to create indexes using CREATE TABLE staement?e.g. creating a primary key or a unique constraint will generate indexes along with the create table syntax:
SQL> create table t (a integer primary key, b integer unique)
Table created.
SQL> select   index_name, index_type, uniqueness
from   user_indexes
where   table_name = 'T'
INDEX_NAME                     INDEX_TYPE                  UNIQUENES
SYS_C0016575                   NORMAL                      UNIQUE
SYS_C0016574                   NORMAL                      UNIQUE
2 rows selected.

When do I really need to create indexes for a table?

Once I was talking to a dba in a conference.
He told me that not always I have to create indexes for a single table, it depends of its size.
He said that Oracle read registers in blocks, and for a small table Oracle can read it fully, in a single operation, so in those cases I don't need indexes and statistcs.
So I would like to know how to calculate it.
When do I really need to create indexes for a table?
If someone know any documment that explain that, or have some tips, I'd aprecciate.
Thanks.
P.S.: The version that I'm using is Oracle 9.2.0.4.0.

Hi Vin
You mentioned so many mistakes here, I don't know where to begin ...
vprabhu_2000 wrote:
There are different kinds of Index. B-tree Index is by default. Bit map index, function based index,index organized table.
B-tree index if the table is large This is incorrect. Small tables, even those consisting of rows within just one block, can benefit from an index. There is no table size too small in which an index might not be benefical. William Robertson in his post references links to my blog where I discuss this.
and if you want to retrieve 10 % or less of data then B-tree index is good. This is all wrong as well. A FTS on a (say) million row table could very well be more efficient when retrieving (say) just 1% of data. An index could very well be more efficient when retrieving 100% of data. There's nothing special about 10% and there is no such magic number ...
>
Bit Map Index - On low cardinality columns like Sex for eg which could have values Male,Female create a bit map index. Completely and utterly wrong. A bitmap index might be the perfect type of index, better than a B-Tree, even if there are (say) 100,000 distinct values in the table. That a bitmap index is only suitable for low cardinality columns is just not true. And what if it's an OLTP application, with lot's of concurrent DML on the underlining table, do you really think a bitmap index would be a good idea ?
>
You can also create an Index organized table if there are less rows to be stored so data is stored only once in index and not in table. Not sure what you mean here but an IOT can potentially be useful if you have very large numbers of rows in the table. The number of rows has nothing to do with whether an IOT is suitable or not.
>
Hope this info helps. Considering most of it is wrong, I'm not sure it really helps at all :(
Cheers
Richard Foote
http://richardfoote.wordpress.com/

How to create the new competitor products in CRM

Dear Sir,
How to create the new competitor products in CRM and it will not synchonize to SAP R/3 for this products?
Thanks and best regards,
Vimol

Hi,
Have a look at these following thread for some more information on New Competitor Products in CRM
Competitor Products (WETT) in CRM 5.2
Hope this will somewhat help.
Thanks,
Samantak.

How to create webservice for abap RFC

how to create webservice for abap RFC.......................
plz any could tel me

I'll answer my own question...
In SE80 you create the Function Group and something called a Virtual End Point. These are the only items that transport forward to you QA and eventually your production system. Everything else has to be created in SOAMANAGER on the target systems.
In Development in SE80, when you create the Virtual End Point, this creates a corresponding entry visible in transaction SICF. When you are done in SOAMANAGER, it creates three more entries in SICF. The process of transporting the Virtual End Point does NOT create any entries in SICF in QA. Don't let this be confusing. In QA, SOAMANAGER will create all four SICF entries.
Also, if you try to secure the web services using the S_SERVICE object, you must actually test the web service before you can add it to any roles. This is because the USOBHASH table is not populated for the web service until you actually run the web service for the first time.

How to create transaction for a maintenance view, Thank you.

How to create transaction for a maintenance view,
Thank you.
deniz...

Hi Deniz,
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
select
viewname and give ur table name.
UPDATE= Xsave
view - table name ( Should be upper case
update X ( should be upper case).
http://www.sap-basis-abap.com/sapbs011.htm
Hope this helps you.
Regards,
Viveks

How 2 creat report for displaying the details of a Delivery Document using

how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewarded

HI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY                                *
report zdelivery message-id z9bhu          .
types: begin of t_likp,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
       end of t_likp.
types: begin of t_lips,
           vbeln type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
        end of t_lips.
types: begin of t_vbpa,
           vbeln type vbpa-vbeln,      "SD DocumenT Number
           posnr type vbpa-posnr,      "Item number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_vbpa.
types: begin of t_kna1,
           kunnr type kna1-kunnr,      "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr type kna1-adrnr,      "Address
       end of t_kna1.
types: begin of t_li_vbpa,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_li_vbpa.
types: begin of t_final,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,     "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr1 type kna1-adrnr,     "Address
           name2 type kna1-name1,      "Name 1
           ort02 type kna1-ort01,      "City
           adrnr2 type kna1-adrnr,     "Address
           name3 type kna1-name1,      "Name 1
           ort03 type kna1-ort01,      "City
           adrnr3 type kna1-adrnr,     "Address
       end of t_final.
*            D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
*           S E L E C T I O N S C R E E N   D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory.    "Delivery no
selection-screen end of block block2.
*            A T S E L E C T I O N - S C R E E N   E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
*            S T A R T   O F S E L E C T I O N     E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
*   APPLICATION                       = 'TX'
*   ARCHIVE_INDEX                     =
*   ARCHIVE_PARAMS                    =
    device                            = 'PRINTER'
*   DIALOG                            = 'X'
*   FORM                              = ' '
   language                          = sy-langu
*   OPTIONS                           =
*   MAIL_SENDER                       =
*   MAIL_RECIPIENT                    =
*   MAIL_APPL_OBJECT                  =
*   RAW_DATA_INTERFACE                = '*'
*   SPONUMIV                          =
* IMPORTING
*   LANGUAGE                          =
*   NEW_ARCHIVE_PARAMS                =
*   RESULT                            =
exceptions
   canceled                          = 1
   device                            = 2
   form                              = 3
   options                           = 4
   unclosed                          = 5
   mail_options                      = 6
   archive_error                     = 7
   invalid_fax_number                = 8
   more_params_needed_in_batch       = 9
   spool_error                       = 10
   codepage                          = 11
   others                            = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
*   ARCHIVE_INDEX          =
   form                   = 'Z9BT_DELIVERY'
   language               = sy-langu
*   STARTPAGE              = ' '
*   PROGRAM                = ' '
*   MAIL_APPL_OBJECT       =
* IMPORTING
*   LANGUAGE               =
exceptions
   form                   = 1
   format                 = 2
   unended                = 3
   unopened               = 4
   unused                 = 5
   spool_error            = 6
   codepage               = 7
   others                 = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
   element                        = 'ITEM_LIST'
   function                       = 'SET'
   type                           = 'BODY'
   window                         = 'MAIN'
* IMPORTING
*   PENDING_LINES                  =
* EXCEPTIONS
*   ELEMENT                        = 1
*   FUNCTION                       = 2
*   TYPE                           = 3
*   UNOPENED                       = 4
*   UNSTARTED                      = 5
*   WINDOW                         = 6
*   BAD_PAGEFORMAT_FOR_PRINT       = 7
*   SPOOL_ERROR                    = 8
*   CODEPAGE                       = 9
*   OTHERS                         = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
*   RESULT                         =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   spool_error                    = 3
   codepage                       = 4
   others                         = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
*   RESULT                         =
*   RDI_RESULT                     =
* TABLES
*   OTFDATA                        =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   send_error                     = 3
   spool_error                    = 4
   codepage                       = 5
   others                         = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*&      Form VALIDATE_DATA
*       text
* --> p1        text
* <-- p2        text
form validate_data .
select single vbeln into wa_likp-vbeln
                    from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform.                    " VALIDATE_DATA
*&      Form FETCH_DATA
*       text
* --> p1        text
* <-- p2        text
form fetch_data .
select a~vbeln
       a~erdat
       a~kunnr
       a~kunag
       a~traty
       b~vbeln
       b~posnr
       b~matnr
       b~arktx
       b~lfimg
       b~netpr
       b~vgbel
       c~vbeln
       c~parvw
       c~kunnr
         into table it_li_vbpa
                from likp as a
                left outer join lips as b on a~vbeln = b~vbeln
                inner join vbpa as c on b~vgbel = c~vbeln
                where a~vbeln in s_vbeln and
                c~parvw = 'RE'.
endform.                    " FETCH_DATA
*&      Form MERGE_DATA_KNA1
*       text
* --> p1        text
* <-- p2        text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
        name1
        ort01
        adrnr into table it_kna1 from kna1
                    for all entries in it_li_vbpa_temp
                    where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform.

How to create EVENTS for a View Cluster.

Hi Tech Gurus,
I have created a view cluster on 5 tables. I need to do a validation and this can be done by using events. But i am unable to create a EVENT for the View Cluster. Could anyone please tell me how to create events for a View Cluster.
Thanks in advance for your esteemed replies.
Regards,
Raghavendra Goutham P.

Hello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field <b>FORM routines main program</b>. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe

How to create index for articles&products in ATG+Endeca application?

Similar Messages

Maybe you are looking for