How to create multi-paging for my output html pages?

my query produces an output that can't be displayed in one single page;
Is there a way to store my data and display what I need?
(As you can understand, I'm new to java...so don't be too bad...)
thank you all.

You could also get the entire ResultSet back, and store the entire thing in a Session variable (i.e. session.setAttribute("result.set", rs)...)
Each page can access the ResultSet by retrieving the variable right from the session. The advantage here is that the search is done completely up front and you don't have to spend time searching later.
Of course, if the search will take an extremely long time to do all at once, then the prior suggestion of just performing a limited query on each page would probably suffice.

Similar Messages

  • How to create a popup window to load HTML page in AIR application without using any mx or spark?

    How to create a popup window to load HTML page in AIR application without using any mx or spark components?
    I need to load the HTML page in popup in AIR application without using any of the <mx> or <spark> components. I need to open in the application itself not in the browser.(If we use navigateToURL() it will open in th browser)

    Can we achieve this? can somebody help me on this scenario..

  • How to create a portlet for a new web page?

    I create a web page "A" in the remote server and have another page "B" which have a button in it. And when push the button in page "B", I want to use PRC to add a new portlet object linking to page "A" to portal. How should I do this?
    I know it's possible to add a new portlet template using IRemoteSession.GetPortletTemplateManager().CreatePortletTemplate(intparentFolderID, intwebServiceID), but how should I get the webServiceID while it haven't been created for the page "A". Must I create the web service in the portal server by hand? Is there any programmatic method to create a new web service by PRC? Or if there are some other methods to create a portlet for a new page without creating webservice, that would be a prefer.

    Hi Prateek,
    I Did the Things Which is Presented By Michal in This Blog.
    But When I Executed RZ70 With My Gateway Service as "sapgw01" And the Gateway Host As "Server Host Name".
    I Got the Error When I Click on "<b>start Data Collection"</b> After Execution of the Program As Follows
    <b>"Used RFC destination :SLD_NUC"</b>
    <b>"RFC call failed : Error opening an RFC connection"</b>
    <b>"Batch job not scheduled"</b>
    All Other Are Success Like Data Collection ......
    Please let me Know What to Do Now...
    Regards
    Khanna

  • How do I change filename for single-image HTML pages in web gallery for LR 3

    Hi,
    I would like to change the default filename for the HTML pages produced by Lightroom 3 in the web gallery. Specifically, I would like to remove the string "_large" from the HTML filename, so it corresponds exactly to the image filename.
    Specifically, the URL by default is like this:
    http://www.mysite.com/content/_c_EMT2146_large.html
    and I would like it to be like this
    http://www.mysite.com/content/_c_EMT2146.html
    I assume there is some way to make this change using the template editors, but I can't figure it out.
    thanks,
    James Riemermann

    Turns out there's a fairly easy way to change that on Windows, but I can't figure out an equivalent on a Mac, which is where the need is. On windows, I can edit (after backing up) the following two config files:
    C:\Program Files\Adobe\Adobe Photoshop Lightroom 3.6\Shared\webengines\default_html.lrwebengine\grid.html
    C:\Program Files\Adobe\Adobe Photoshop Lightroom 3.6\Shared\webengines\default_html.lrwebengine\manifest.lrweb
    In which the "_large" string is appended and can be removed, following which the gallery works exactly as I would hope.
    But I can't find the equivalent files on the Mac, though I would assume they exist.

  • How to create a preset for computer output of 1024x768?

    I just upgraded from Premiere Elements 1.0 (yes, 1! :) ) to PE7. I record user group meetings for my local software developers group. We have screen capture at 1024x768 pixels and audio.
    In PE1 I had no trouble bringing this footage in, editing it and exporting it as 1024x768 for viewing online by the members.
    However, I can't seem to find anyway to create a project preset for 1024x768. It seems I can only create SD, HD and similar.
    When attempting to create a custom preset 90% of the values are pre-filled with settings and I can't change them. I see textboxes for the height and width but I can't change them.
    Is this a limitation of PE7? Why in the world can I not create a video any size I want? Without this ability the upgrade is almost useless to me.
    Please let me know because I feel like I must just be missing something.
    Thanks!
    Matt

    Hey Steve,
    Thanks for the reply.
    I did see the 720p preset and this does produce a nice image. The SD preset made the output look muddy and the screen text was unreadable.
    That being said, when importing my media into a project on the 720p preset I get the black letterbox bars on the side.
    I did render a 10 second test area and changed the output size to 1024x768. I was afraid it would squash the entire video, but much to my surprise it just cropped it. So, while I have to work with the letterboxing I can output an actual 1024x768 video. I was also having a little trouble because I was using File - Export Movie to, well, export my movie. When I tried the Share task, set it to PC and changed the settings this was much easier and produced a much better result.
    Thanks for the help!
    FYI, I use PE7 to export it as a wmv. I'm playing with Expression Encoder to then encoded this with VC-1 for Silverlight clients.

  • How to create multi garnishment order for the same garnishment document

    Hi,
    Can anyone tell me how to create multi garnishment order for the same garnishment document. I tried to copy the entry in IT0195 but the sequence field is grayed out so it will just delete the old record. What configuration should I do to make this possible?
    Thanks a lot in advance.

    hi,
    As far as I got it.
    You cannot have multiple Garnishment order but if a need arises you have to maintain it in IT216.
    For that follow this path goto PA30->pernr->194->change->Garnishment->adjustment.
    Since like order you cannot maintain adjustment also directly.
    Regards,
    Amit
    Reward all helpful replies.

  • How to create t-code for a table and how to create transaction variant???

    Hi,
    I have created a custom table zsark.
    Now my requirement is : I have to create a transaction variant zsark_var for sm30 and table zsark. I have to disable the output of the first screen. I have to assign the transaction variant to the transaction code of table zsark.
    Now,
    1.     how to create transaction code to a table. Can any one give me the 
                    staps??
    2.     how to create transaction variant for the above requirement???
    Thanks & Regards,
    Sarkar

    Hi
    1 Goto SE93 transaction
    2 Choose 5th option Transaction with parameters
    3 Give transaction : SM30, Check Skip Initial Screen Press Enter
    4 Goto Bottom left corner, click F4 select viewname, on right hand side give table name
    5 Press one more time F4, choose update , mark it X on right side.
    6 save the transaction.
    Thanks
    sandeep
    reward if helpful

  • How to Create a datatype for a storeprocedure which has got array ?

    Hi All,
    Please tell me how to create a datatype for a storeprocedure which has got an array structure ?
    Thanks,
    Sindhu.

    Hi Sindhu.
    You would have to use a JDBC Cursor for this but it's possible only Output parameters, not Input parameters.
    It's describle in a help link:
    Defining an EXECUTE Statement  http://help.sap.com/saphelp_nwpi711/helpdata/en/44/7b72b2fde93673e10000000a114a6b/frameset.htm
    The following SQL data types are supported:
    INTEGER, BIT, TINYINT, SMALLINT, BIGINT, FLOAT, REAL, DOUBLE, NUMERIC, DECIMAL, CHAR, VARCHAR, STRING, LONGVARCHAR, DATE, TIME, TIMESTAMP, BINARY, VARBINARY, LONGVARBINARY, BLOB (input and output), CLOB (input and output), CURSOR (output; only in connection with the Oracle JDBC driver)
    I think you can execute your StoreProcedure many times depends of array occurs.
    Regards.
    Bruno.

  • How to create volume slider for flash cs 5 using action script 2.0?

    how to create volume slider for flash cs 5 using action script 2.0?the output should like if user want to hear sound in slow pitch,medium pitch or high pitch(slow to high pitch anything).i have attach this sound to button with using this code:
    stop();
    mySoundBtn.onRelease = function () {
              mySoundC = new Sound(this);
              mySoundC.attachSound("mySoundClip");
              mySoundC.start(0, 10);  //10 represents the number of loops
              gotoAndPlay(2);
    This sound plays till 3-4 scene ahead.
    Can anyone help me?

    Hey thnx Ned.
    this sites are really helpful.but,i have used sound through button.so how it is possible to attavh the link with slider.i have created slider also.
    Below is my slider code for sound.
    onClipEvent (load) {
        mySound1 = new Sound();
        mySound1.loadSound((myScale)+"/"+(myTanpura)+"/"+(myTanpuraSwar)+"/"+(myTanpuraTempo)+".w av", true);
        mySound1.onSoundComplete = function() {
        mySound1.start();
        mySound1.start(0.058,999);
    onClipEvent (enterFrame) {
        downloaded = mySound1.getBytesLoaded();
        total = mySound1.getBytesTotal();
        if (downloaded != total) {
            _root.dl = "You have to buy this software...";
        } else {
            complete = 1;
            _root.dl = "";
        mySound1.setVolume(ratio * 2);
    This code is working for slider.I mean it scrolls the slider.but it dosent make any effect to sound.
    Below is my button code.
    stop();
    mySoundBtn4.onRelease = function () {
              mySoundC = new Sound(this);
              mySoundC.attachSound("mySoundClip4");
              mySoundC.start(0, 300);  //10 represents the number of loops
              gotoAndPlay("play1");
    this is on button's frame.not exactly on button.
    Button and Slider both are on diffrent scene.
    Can you plese help me out?

  • How to create an Invoice for the sales order using the T-Code VF01

    Hello Experts,
    How to create an Invoice for a sales order using the T-Code VF01?
    Thanks in advace,
    Suma

    hi,
    Make the following settings-
    1. Create sales document and billing type
    2. assign billing type in sales document type config VOV8
    3. Activate itemcategory as sales order related billing
    4. Maintain copy control header and item level between sales order and billing
    5. Maintain pricing procedure for sales order and billing
    6. Define Output procedure in case to print invoice
    Regards
    Goutham

  • How to create a macro for a planning type in MC8b transaction

    Hi,
    I am presently working for a product allocation demand, which have a information structiure with characteristic and key field.
    the characteristic are production allocation quantity, incoming order quantity, and open order quantity.
    i have created a planning type in which the data updation takes from the excel file to the planning type in mc95.
    but i need to create a macro for this planning type .
    can any body give the details information how to create a Macro for a planning type.
    Thanks and regards
    GopalKrishna

    Dear Gopal
    May be the link would be helpful to you.
    [Planning Types and Macros|http://help.sap.com/saphelp_46c/helpdata/en/a5/631cc443a211d189410000e829fbbd/frameset.htm]
    Drill down the left tab once you opened the link, for more information.
    Thanks
    G. Lakshmipathi

  • How to create custom infotype for training and event management

    hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
    PS No – PA0000-> PERNR
    Name   - PA0001 -> ENAME
    IS PS.No. – PA0001-> PS no. of Immediate Superior
    IS name PA0001 -> ENAME
    thanx in advance
    afzal

    Hi,
    Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
    If you wish to create a PD infotype, use transaction PPCI to create the infotype.
    But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
    If you wish to create a PA infotype, use transaction PM01 to create the infotype.
    But before that you may be required to create a strcuture PSnnnn  (where nnnn is the infotype number) with all the fields relevant for the infotype.
    Regards,
    Srini

  • How to create one TO for multiple TRs

    Dear All,
    how to create one TO for multiple TRs, kindly suggest me
    Regards,
    balu

    As for your question: it is discussed in sAP online help:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f841f24afa11d182b90000e829fbfe/frameset.htm
    Sorry I misunderstood your question.
    The above mentioned solution won't create one single TO from multiple TR.
    Edited by: Csaba Szommer on Aug 11, 2010 9:46 AM

  • How to create one checksum for 264 vis

    Hi,
    How to create "one Checksum" for 264 Vis.These 264 Vis are Interlinked if i change code for any .vi the checksum Should be update.This checksum is shown on the main window.
    Regards
    Ravindranath
    Solved!
    Go to Solution.

    Here's a slightly simplified version (saved in 8.6).  There's no need for the Get/Set File Position.  The file position is already being incremented with the read.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Multiple File MD5 Checksum (Version 8.6).vi ‏23 KB

  • How to create new scope for SharePoint calendar?

    How to create new scope for SharePoint calendar?
    I have a calendar list to which I want to create following scopes-
    Annual View
    Half Year 1 (Jan-June)
    Half Year 2 (Jul-Dec)
    Quarter 1 (Jan-Mar)
    Quarter 2 (Apr-Jun)
    Quarter 3 (Jul-Sep)
    Quarter 4 (Oct-Dec)
    How this can be created. Any help appriciated. Thanks.

    Hi Pratima,
    Can you please see below link and code snippet for how to
     format date in gridview.
    http://www.aspdotnet-suresh.com/2011/05/how-to-set-date-format-in-gridview.html
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head runat="server">
    <title>Gridvew Date format</title>
    </head>
    <body>
    <form id="form1" runat="server">
    <div>
    <asp:GridView runat="server" ID="gvdetails" DataSourceID="dsdetails" AllowPaging="true" AllowSorting="true" AutoGenerateColumns="false">
    <RowStyle BackColor="#EFF3FB" />
    <FooterStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
    <PagerStyle BackColor="#2461BF" ForeColor="White" HorizontalAlign="Center" />
    <HeaderStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
    <AlternatingRowStyle BackColor="White" />
    <Columns>
    <asp:BoundField DataField="Date1" HeaderText="Date1" HtmlEncode="false" DataFormatString="{0:s}" />
    <asp:BoundField DataField="Date2" HeaderText="Date2" HtmlEncode="false" DataFormatString="{0:D}" />
    <asp:BoundField DataField="Date3" HeaderText="Date3" HtmlEncode="false" DataFormatString="{0:m}" />
    <asp:BoundField DataField="Date4" HeaderText="Date4" HtmlEncode="false" DataFormatString="{0:d}" />
    <asp:BoundField DataField="Total" HeaderText="Total" HtmlEncode="false" DataFormatString="{0:C2}" />
    </Columns>
    </asp:GridView>
    <asp:SqlDataSource ID="dsdetails" runat="server" SelectCommand="select * from DateFormat" ConnectionString="<%$ConnectionStrings:dbconnection %>"></asp:SqlDataSource>
    </div>
    </form>
    </body>
    </html>
    Hope this will help you.
    Regards
    Soni K

Maybe you are looking for