How to create priority questions

I have 15 questions in a form where the priority should be between 1 to 15.
So if Q1 I pick priority 1, Q2 would have to show (2 to 15). if I pick priority of 15 for Q2 then Q3 would have the options of 2 to 14 and so on ....
In other words each question would have to belong to one of the priorities exclusively.
Survey Monkey has this feature. How do we implement this in formscentral?

The incident will be created with the default values. After the incident is created the workflow will be triggered (based on the criteria defined in the workflow) and applies the new template. There is a short delay between the incident is created and the
workflow is triggered and template is applied. It could be around a 60-90 seconds delay.
At least this way it works if everything is configured right.
Andreas Baumgarten | H&D International Group

Similar Messages

How to create Survey?

Dear All
I know that there is a portlets for survey. But in fact I do not know how to use it.
How to create the questions and how to collect the answers
Is there any one tried this before?
Thanks in advance

To get started, go to http://download.oracle.com/docs/cd/B14099_19/portal.1014/b13809/apdxdata.htm#sthref4783
and read the following sections regarding creating survey portlets:
A.5.7 Working with the Survey Portlets
A.5.7.1 Creating a Survey
A.5.7.4 Adding a Survey, Poll, or Test to a Page
I'd also recommend searching this particular forum using the keyword "survey" since there have been many questions and answers about the built-in survey portlet posted here over the years that may be helpful for you.

Basic question, how to create rtf template with a given xml file

Hello guys
I am new to BI publisher and I am learning how to create rtf templates using given xml fiel definitions by following the bi publisher guide
The steps I am following is:
1, create template using template builders, which is downloaded into MS words.
2, In the empty template, map the xml columns with template field using BI publisher tag
3, upload the template to BI Publisher as a layout.
That's all I can understand.
My question is:
1,in which above step do I import XML file into template builder (if not bi publisher), how to do so?
2,After template is created, how to associate this template layout with existing reports in BI Publisher, or is it necessary at all?
3,In the template content in MS Word template builder, what should I enter other than BI publisher tags for mapping XML field to desired template field
Or, if my understand of this process is entirely wrong, what's the right process of creating rtf template with a given XML file definition
Thanks

If you have a BI Publisher desktop installed, have a look a the demos,.. should answer most of your basic questions.
(Windows) Start->Programs->Oracle BI Publisher Desktop->Demos
Invoice Demo - good one for those with E-Business Suite
Report Demo - Sample using BI Publisher

Question on how to create a pivot table

Hi,
I am trying to create a dynamic pivot table (the number of column and row layers change for each request) and I cannot use a data base structure to back it up.
I thought of doing it through a managed bean but in order to do it I need to know how to create the PivotTableModel.
The pivot table model requires a data source object and I do not know how to create it to support multiple row and column layers.
Is there a default data source object that I can extend, or better yet is there a written example on how to create a pivot table model using a managed bean.
Thanks,
Or

Hi,
duplicate of ADF -11g : Question on how to create a pivot table

How do I create quiz question in reflow?

How do I create quiz question in reflow? There is form element but how am I going to get the value of the radio button or the text entry?

You can design the quiz in Reflow but you'll need to code up some sever side code to collect the data and reports for your quiz. If you don't want to write the code you could look at Muse or an online service like typeform or some elearning solution.
Hope that helps,
Chris

Beginner question: How to create a duplicate

Sorry to ask such a basic question .. I'm a beginner! Can't seem to find out how to create an exact duplicate of a photo I have finished editing ... so I can create a black & white version ... can someone help?

You are welcome, welcome..... ........The nicest and fastest reply in some time!
There are a ton of tutorials available online, and if you have any trouble finding same, post back and recommendations will be made.

How to create an object for this Question...

i want to create an object to Factorial.java, but the class is in String object... how can i do that
please help me with code how to create an object
String str = Factorial.java;
i tried to do like this
str s1 = new str();
this way is not working...
thank u

yes sir am trying to instantiate and retrieve the metadata, am a student am asked to do Program Analyzer, while fullfilling the application requirements i came across this situation, like i have to find total number of public methods in any source file that is entered as input.
Am taking the input in String variable, i can have the details of the source class only of i instantiate and create an Object to that....
Please suggest me some way to do that... JAVA is so interesting am working on the project since 2 weeks am done with all other classes but struck here finding the total number of methods...
Thank you

Question: How to create new user and schema in 11g?

Who can give me answer how to create a new user and schedule?
I had installed oracle 11g DB and oracle client in my windows OS. I found in the 11g there is no enterprise manager console with new version. It is different from with oracle 10g.So i don't know how to create it new user.
I had created new DB instance, but i don't how to create a user on that. Who can give me a hand for that? I hope one oracle experenice expert give my answers.
Thanks a lot!
Edited by: user774630 on Oct 27, 2008 10:01 PM
Edited by: user774630 on Oct 27, 2008 10:09 PM

Hi,
I am not sure that which option you are talking about? Are you using the EMCA,http://download.oracle.com/docs/cd/B28359_01/server.111/b28319/emca.htm#SUTIL800] to create the new repository for the EM? If not the command line than the other only way is to use DBCA(Database Configuration Assistant).I believe you are talking about that. Yes ,if the message is coming creating the repository than after wards you can login to the EM. You would get the port no of the EM's HTTP port from the $OH/install/portlist.ini file.
HTH
Aman....
Edited by: Aman.... on Oct 28, 2008 11:36 AM
Gave up, link insertion doesn't work.

Newbie question: How to create a namespace and record filedate-retrieve

Spanking new to Namespaces
Looking for a way to place a .jpg as a smart object, then using Namespace, record the filedate of the .jpg
Then, have the layer sense if the original .jpg is newer and change the color of the layer.
Running into complications trying to do this with .jsx scripting alone.
Reason: This way, if the .jpg has been updated on the file server, the artist will be able to easily see that.
Don't want to add a panel and more work for the artist. Rather, have it all happen behind the scenes.

Here is how I create a new namespace in the layer metadata for my panel
// new namespace. Even though it looks like a web url it's not. It just needs to be unique.
const ns= 'http://www.smartobjectlinks.com/1.0/';
function setSOLinkMetadata( property, value ){
     if( activeDocument.activeLayer.isBackgroundLayer || !loadXMPLibrary()){
          alert( ErrStrs.CONVERT );
     } else {
          var xmp;
          if (value == "")
               value = " ";
          try{
               xmp = new XMPMeta( activeDocument.activeLayer.xmpMetadata.rawData );
          } catch(e) {// no metadata so create new and add namespace
               xmp = new XMPMeta();
               var linkNS = new Namespace ( 'link', ns );
               XMPMeta.registerNamespace ( linkNS, 'SOlink' );
          try{
               xmp.setProperty(ns, property, value );
          } catch(e) {
               alert( ErrStrs.FAILEDMETADATA + e);
          activeDocument.activeLayer.xmpMetadata.rawData = xmp.serialize();
     unloadXMPLibrary();
If the file being linked has metadata you can use the ModifyDate in the XMP.
function getfileDate( file ){
     var date = new String();
     try{
          loadXMPLibrary();
          var xmpf = new XMPFile( file.fsName, XMPConst.UNKNOWN,
                                   XMPConst.OPEN_FOR_READ );
          var xmp = xmpf.getXMP();
          xmpf.closeFile();
          date = new XMPDateTime( xmp.getProperty
                              (XMPConst.NS_XMP, "ModifyDate").toString() );
     }catch(e){// fallback to OS file date
          date = new XMPDateTime ( file.created );
     date = date.toString();
     unloadXMPLibrary();
     return date;
The hard part will be getting the layer to 'sense' when the original has been changed. If you don't want the user to trigger the test you will have to use an event like open.

ADF -11g : Question on how to create a pivot table

Hi,
I am trying to create a dynamic pivot table (the number of column and row layers change for each request) and I cannot use a data base structure to back it up.
I thought of doing it through a managed bean but in order to do it I need to know how to create the PivotTableModel.
The pivot table model requires a data source object and I do not know how to create it to support multiple row and column layers.
Is there a default data source object that I can extend, or better yet is there a written example on how to create a pivot table model using a managed bean.
Thanks,
Or
Edited by: user638363 on Dec 18, 2008 7:02 AM

Hi,
beyond the documentation, the pivot table is described in
http://technology.amis.nl/blog/2593/adf-faces-11g-reloading-the-matrix-using-the-pivot-table-component
http://technology.amis.nl/blog/3786/creating-a-salary-heat-map-with-the-adf-11g-faces-pivottable-component
http://technology.amis.nl/blog/3673/adf-11g-richfaces-a-closer-look-at-the-pivot-table-data-visualization-component
I am not aware of any sample that directly meets your requirement
Frank

Question - How does the Priority feature of the Send Port work?

How does the Priority feature of the Send Port work?

The Priority setting of the Transport Advanced Options controls the order in which messages are removed from the messageBox. Ports with higher priority will be processed earlier than the ports with lower prioirty making the higher priority ports more important
relative to other send ports within a single host.
Refer:
Send Port Priority
The highest prioirty is 1, and the lowest is 10. The default value is 5.
Rachit

Easy Question How to create Basic Groups and add respective Users

Please help. I need to know how to create a basic group and later add users to the group. The group name would be callled Hardware and I will add johnsmith and janedoe to the group. Should I concern myself with the group id for whatever reason? I think the command is somthing like groupadd. Do I do somthing like:
# groupadd Hardware
# useradd -G Hardware johnsmith
# useradd -G Hardware janedoe
I'm using Solaris 10 if that helps.
A million thanks I very New2Solaris,
Johnny Mac

Ok here is what I found on the net:
change a user's group information change a user's primary group membership:
usermod -g Hardware johnsmith
usermod -g Hardware janedoe
I forgot to mention that these are existing accounts (sorry)
In order to change user's supplemental group membership:
usermod -G Hardware johnsmith
usermod -G Hardware janedoe
is the supplemental group simply adding them to another group and not changing there primary group, which by default I think is staff. I would like to keep them in staff and add them to another group, in this case Hardware.
Anyones thougths?

How to Create the Custom print Quote Report ?

Hi All,
I want to create the custom Print Quote report . I know the below details and referred the below metalinks .
Note: 780722.1 - How to Create a Custom Print Quote Template in Oracle Quoting ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=780722.1
Note: 392728.1 - How to Modify the data source for the XML version of the Print Quote report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=392728.1
Note: 468982.1 - How To Customize The Asoprint.Xsl
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468982.1.
Oracle Metalink:
Note: To add a column to the print quote report, following files need to be updated:
LinesVO.xml --- xml files containing the sql query and attribute definition
LinesVORowImpl.class - public class extending the framework class OAViewRowImpl.
This class contains the set and get for the attributes defined in xml file.
ASOPRINT.xsl - this is the xsl stylesheet file used to describe the report layout.
This file needs to be modified to include the new column being added to the report
QUESTION :
My question is,
1. wether my approach (below iare the details)of trying to extend the PromptVO is the right way or is there any other way to add the new columns.
I want to add new fields on to the report . When i looked into the it says the below
Here we find that to add a new column, oracle says to update the LINESVO.xml, do they really mean to update the base files.
This report uses following VO's
PROMPTVO
HEADERVO,
LINESVO.
To create new Headers & Prompts, i tried extending the PROMPTVO. Once the extended VO is substitued , i dont even get the data for standard oracle Prompts. is this the right way to add columns?
Thanks

Hi All,
I want to create the custom Print Quote report . I know the below details and referred the below metalinks .
Note: 780722.1 - How to Create a Custom Print Quote Template in Oracle Quoting ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=780722.1
Note: 392728.1 - How to Modify the data source for the XML version of the Print Quote report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=392728.1
Note: 468982.1 - How To Customize The Asoprint.Xsl
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468982.1.
Oracle Metalink:
Note: To add a column to the print quote report, following files need to be updated:
LinesVO.xml --- xml files containing the sql query and attribute definition
LinesVORowImpl.class - public class extending the framework class OAViewRowImpl.
This class contains the set and get for the attributes defined in xml file.
ASOPRINT.xsl - this is the xsl stylesheet file used to describe the report layout.
This file needs to be modified to include the new column being added to the report
QUESTION :
My question is,
1. wether my approach (below iare the details)of trying to extend the PromptVO is the right way or is there any other way to add the new columns.
I want to add new fields on to the report . When i looked into the it says the below
Here we find that to add a new column, oracle says to update the LINESVO.xml, do they really mean to update the base files.
This report uses following VO's
PROMPTVO
HEADERVO,
LINESVO.
To create new Headers & Prompts, i tried extending the PROMPTVO. Once the extended VO is substitued , i dont even get the data for standard oracle Prompts. is this the right way to add columns?
Thanks

How to create a group calendar?

Hello,
i am sorry but this is one more question on wiki-group-calendars.
*In short:*
I am not able to create a group calendar with the wiki frontend. the calendar that is created with a wiki is owned by the admin of the wiki. So it is always a personal calendar that cannot be shared in iCal.
LONG:
I want to create a group calendar that is viewed and edited through iCal.app and the web service. Apple´s "wiki deployment" guide says on page 57:
+"The web calendar allows you to easily schedule events for yourself or your group. ...+
+There are *two types of web calendars: personal and group*. You can send and receive event invitations through the personal calendar but not through the group calendar. Also, *while anyone in a group can create or edit events in a group calendar*, you can edit only events in your own personal calendar or event invitations you send to other people.+
+The web calendar uses iCal Server to store events and invitations. ..."+
But there is not mentioned how to create a group calendar. The calendar created with the wiki web-frontend belongs to the admin of that particular wiki. This is why the calendar data ist stored in folder named with the UUID of the wiki admin. Also the alias "http://server.fqdn:8008/principals/groups/mygroupname/" which i provided in iCal turns into ..._uids_UUID-of-the-wiki-admin and only the wiki-admin can access this calendar in iCal.app.
My research on this topic reveals that there were in issue that should be resolved in 10.6.4 (that is running on our Server). So, again, how to create a group calendar?
Thanks, Philipp.
10.6.4 OSX Server
10.6.x Clients

farmer tan wrote:
you need to go to the wiki page and add the wiki's there and then in the setting of the wiki is where you set permissions and services such as calendar, blog, and podcast you can also set all permissions for the wiki in the settings tab
fyi none of my groups were available unless i logged into the wiki as the Directory Admin not Server Admin
migrated from 10.5.7 to 10.6
Message was edited by: farmer tan
Could you be more specific farmer tan, please?
You said "you need to go to the wiki page and add the wiki's there...." What is the "wiki page" you mention? Is that some place I go to via the browser or the Server Admin tool?
I went to http://ical.mysite.com/ical/ and logged in as the Directory Administrator but didn't see anything resembling what you described.
Thanks in advance for any help you can provide.

How to create a user in J2ee UME, if LDAP configured?

Hi SAP Gurus,
I have a question for my J2EE engine. We configured LDAP for user storage, so that our User can use there normal LDAP user ID. Now I want to create an administrative user like J2EE_ADMIN or Administrator, these are standard users and present in the UME of the J2EE engine since the installation of my portal.
But when I go to the user admin and want to create this new admin user, I got an error message, that Im not able to create it.
I also try to create the user via the Visual Admin and the J2EE Useradmin.
So my question is, how can create this new user in the UME and NOT in the LDAP???
Thanks.

Hi Marcel Haberland ,
If your idea is to have single Sign on , I would say the process is to create the user in LDAP itself that will be the single point of entry , Since the UME is configured and connected to LDAP normally with read permission your best bet will be to create the user in LDAP.
SSO with is configured to all your backend syst ( trusts needs to be configured between Java/Portal to all your backend systems by Basis team), also the ids needs to exist in all the backends.
Now to come back to your question:
If you can login to UME of portal/Java , and create the user do not expect it to appear on your LDAP
mainly because LDAP will never be configured in a Enterprise project as bidirectional ( ie Read/Write ), it will be readonly.
Also if the Basis/Portal team allow you the option to create the user in UME , they will have to restart the machine everytime you need to point to a different data source , but I dont know if this is the case in EHP4 versions, because SAP claims with EHP4 downtimes are almost nullified.
Edited by: Franklin Jayasim on Jun 29, 2010 6:59 PM
Edited by: Franklin Jayasim on Jun 29, 2010 7:02 PM

How to create priority questions

Similar Messages

Maybe you are looking for