How to create transaction for table maintinance generator

what is the procedure(steps) to create transaction for a table maintinance generator

Hi,
The link will be useful for ur requirement.
allaboutsap.blogspot.com/2007/04/table-maintenance-in-sap-step-by-step.html
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8129f164-0a01-0010-2a8e-8765287250fc
REgards,
Sarosh

Similar Messages

Create transaction for table

Hi experts,
Can anybody help how to create transaction for table maintenance generation?
Thanks in advance,
Zak.

Hi
Check this:
Table maintennace generator is used to create screen to maintain values in a table. Once you create maint generator you can goto transaction SM30 and add data to table . In SAP it is more relevant to customizing data.
Create a table maintance program for a z table :
In transaction SE11, in the attribute tab of your z table check table maintenance check box. Go to SM30 transaction, enter the ztable name and click on maintain button. Here you can enter new entries into the ztable .
Or
You can create a PARAMETER TRANSACTION for the transaction for SM30 .
Follow these steps :
1. go to transaction SE93 , give your own transaction code say ztran_tab, for maintaining your ztable.
2. Click on create button and check the radio button Transaction with parameters (PARAMETER TRANSACTION) and click on the tick button.
3. In the next screen enter default values:
transaction : SM30
check the check box skip initial screen
4. Scroll down you will find a table control for default values
Name of the screen field | value
VIEWNAME | your ztable name
SHOW | X
Save your work.
Now as you have created a custom transaction for maintaining your ztable this transaction can be called from any program with CALL transaction 'XXX'.
Regards,
Vishwa.

How to create transaction for a maintenance view, Thank you.

How to create transaction for a maintenance view,
Thank you.
deniz...

Hi Deniz,
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
select
viewname and give ur table name.
UPDATE= Xsave
view - table name ( Should be upper case
update X ( should be upper case).
http://www.sap-basis-abap.com/sapbs011.htm
Hope this helps you.
Regards,
Viveks

How to create variant for table/view ?

Hi,
When I go through SM30, I find a radio button called variant. I don't know the effect.
Can anyone tell me how to create variant for table / view ?
I want to know when we need to create variant for table/view.
Best regards,
Chris Gu

hi ,
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
Procedure
To create a new variant:
       1.      On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
       2.      On the variant maintenance initial screen, enter the name of the variant to be created.
Note the naming convention for variants (see below).
       3.      Choose Create.
If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
       4.      If there is more than one selection screen, select the screens for which you want to create the variant
5.      Choose Continue.
The (first) selection screen for the report appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
       6.      Enter the desired selection values, including multiple selection and dynamic selection.
       7.      Choose Continue.

How to create transaction for FM

Hi All,
Can anybody please let me know How to create transaction for FM which can direct run by passing value and return the result.
I want to create transaction code for my function module.Please let me know how we can achieve that. tahnsk in adavance.
Regards,
Kalpana
Message was edited by:
 kalpana k

Hi,
You can create transaction code for your FM. First create a report program in SE38. and call you FM as shown in below example.
report Zxyz.
constants: gc_viewname like dd02v-tabname value 'YFIT_COST_RATE'.
start-of-selection.
call function 'TABLE_CUSTOMIZING_MAINTENANCE'
 exporting
 tabname = gc_viewname
 exceptions
 no_views = 1
 others = 2.
if sy-subrc <> 0.
 message a007(e2) with gc_viewname.
endif.
similar to this FM you can call your FM and you can write your processing logic after FM call.
thanks,
sksingh

Creating transaction for tables

Hai,
This is very urgent, pls give me an idea for converting table into a transaction.
ie, by running transaction the particular table should display the contents.

Hi,
Table Maintenance generator is required to do Manual entries in the Table.
If the requirement is to update the table only programmatically
and not manually then table maint generator is not required.
Manual entries in table can be maintained ( New record can be inserted / existing can be modified )
using transaction SM 30, if the table maintenance for the table is generated.
http://help.sap.com//saphelp_470/helpdata/EN/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm
How to activate Table maint.
Goto SE11 and open the table.
Click UTILITIES -> Table Maint. Generator, Enter the details and click on Save. Then activate the table.
chk a sample 1.
refer.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
how to create a a T-code of that
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
WRITE
viewname = give ur table name.
show = X
save and check it once...
now u can able to call ur table through ur new t.code...
Regards,
Padmam.

How to create event in table maintenance generator

Hi guys,
I need to create an event for my table maintenace generator such that when the field land1 is filled, the landx field should take its data from t005t table. and the ladnx field should be display only, it can not be modified in table maintenance.
How can i create an event in table maint. gen? How am i going to do it?
thanks always,
mark

Hi,
As mentioned in the last post go to the event screen by
Environment --> Modifications --> Events.
There you click on new entries and try writing your logic for event 21 i.e. after selecting 21 give some name of your event and write down the logic how you want to do this.
If event number 21 does not work then try 1. One of these two should work.
Hope this helps!!!
Regards,
Lalit

How to create query for tables with many to many relationship

in my sql i'm unable to update the table using select clause...is there any way to update a table which is in many to many relationship.
Ex:1st table student(student_id int primary key auto_increment, student_name varchar(30));
2nd table contact (contact_id int primary key auto_increment, c_email varchar(40));
3rd table student_contact(student_id int references student, contact_id int references contact);
i would like to auto insert the both two columns in the student_contact while the student and the contact table being updated automatically.

This is a JSP/JSTL forum, not a SQL forum. If you're using MySQL, better use their own forums at dev.mysql.com.
I'll give some hints anyway: learn about SQL JOIN. In general there is good SQL documentation available at the website of the RDBMS manfacturer. Go check it out. There is also a nice SQL tutorial at w3schools.com. Good luck.

How to create t-code for a table and how to create transaction variant???

Hi,
I have created a custom table zsark.
Now my requirement is : I have to create a transaction variant zsark_var for sm30 and table zsark. I have to disable the output of the first screen. I have to assign the transaction variant to the transaction code of table zsark.
Now,
1.     how to create transaction code to a table. Can any one give me the
                staps??
2.     how to create transaction variant for the above requirement???
Thanks & Regards,
Sarkar

Hi
1 Goto SE93 transaction
2 Choose 5th option Transaction with parameters
3 Give transaction : SM30, Check Skip Initial Screen Press Enter
4 Goto Bottom left corner, click F4 select viewname, on right hand side give table name
5 Press one more time F4, choose update , mark it X on right side.
6 save the transaction.
Thanks
sandeep
reward if helpful

How to create transaction code for a Z-table

How to create transaction code for a Z-table?
Se93 --> then which radio button to be selected? and what is the program nam e to be given

Hi Sam,
Procedure to create a TCODE for ZTABLE:
Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
Se93 --> then which radio button to be selected
Select the parameter transaction as a radio button.
what is the program nam e to be given
no need to give any program name. Instead you have to give the transaction code name as SM30.
Pls mark the helpful answers.
Thanks
Eswar

How to create transaction code for maintenance view

hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.

Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful.

How to create Transaction code for ABAP and execution by other user

Hi All,
Could someone please let me know how to create transaction code in detail for ABAP program. Step by step procedure expected. I would like to know how other user can execute the report using same transaction code which I have created.
More about authorization.
Thanks in advance.

Hello,
You can create transaction code from se80 as well.In object navigator,right click on your program name and create->transaction code.You can create transaction and select if it is only a report,a report with selection-screen depending on your requirement.You can run your report directly by entering the transaction code in the command field.
You can authorise the users who can use your transaction:
Authorisation objects are used to restrict certain transactions to users.Critical data must be protected from unauthorised users.For example,the head has access to certain data.But it cannot be accessed by his subordinate.For this we need to define roles.
Create an authorization object with transaction SU21.
An object usually consists of the ACTVT (activity) field and one other field,which specifies the data type to be protected.By ACTVT, we can decide if the data is accessible for change,display only etc.
Add authorization fields to the authorization object created.
Assign the authorization object to the transaction using SE93.
Attach the authorization object to the role using transaction PFCG.
If you want to assign roles,use transaction PFCG.Create a new role.In the AUTHORIZATIONS tab,you can get a self generated profile name and a profile text by clicking on the icon next to it.Then go to the "Change Authorization data" and choose an authorization template.Then you can choose to display/change/create an activity and after the selection,click on the red and white circle.The profile will now be created.
In the user tab,you can give the user details who can use this role.
Also check this link:
http://www.*********************/r3_security/r3_security_tips.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/52/6716a6439b11d1896f0000e8322d00/content.htm
Very helpful guide:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a92195a9-0b01-0010-909c-f330ea4a585c
Regards,
Beejal
**Reward if answer is helpful

What is authorization object and how to create it for a table

Hi All,
What is authorization object and how to create it for a table?
Thanks

Hi
Authorization
For authorization checks, there are many ways of linking authorization objects with user actions in an SAP system. The following discusses three possibilities in the context of ABAP programming.
Authorization Check for Transactions
You can directly link authorization objects with transaction codes. You can enter values for the fields of an authorization object in the transaction maintenance. Before the transaction is executed, the system compares these values with the values in the user master record and only starts the transaction if the appropriate authorization exists.
Authorization Check for ABAP Programs
For ABAP programs, the two objects S_DEVELOP (program development and program execution) and S_PROGRAM (program maintenance) exist. They contains a field P_GROUP that is connected with the program attribute authorization group. Thus, you can assign users program-specific authorizations for individual ABAP programs.
Authorization Check in ABAP Programs
A more sophisticated, user-programmed authorization check is possible using the Authority-Check statement. It allows you to check the entries in the user master record for specific authorization objects against any other values. Therefore, if a transaction or program is not sufficiently protected or not every user that is authorized to use the program can also execute all the actions, this statement must be used.
AUTHORITY-CHECK OBJECT object
 ID name1 FIELD f1
 ID name2 FIELD f2
 ID namen FIELD fn.
object is the name of an authorization object. With name1, name2 ... , and so on, you must list all fields of the authorization object object. With f1, f2 ... , and so on, you must specify the values that the system is to check against the entries in the relevant authorization of the user master record. The AUTHORITY-CHECK statement searches for the specified object in the user profile and checks the useru2019s authorizations for all values of f1, f2 ... . You can avoid checking a field name1, name2 ... by replacing FIELD f1 FIELD f2 with DUMMY.
After the FIELD addition, you can only specify an elementary field, not a selection table. However, there are function modules available that execute the AUTHORITY-CHECK statement for all values of selection tables. The AUTHORITY-CHECK statement is supported by a statement pattern.
Only if the user has all authorizations, is the return value sy-subrc of the AUTHORITY-CHECK statement set to 0. The most important return values are:
· 0: The user has an authorization for all specified values.
· 4: The user does not have the authorization.
· 8: The number of specified fields is incorrect.
· 12: The specified authorization object does not exist.
A list of all possible return values is available in the ABAP keyword documentation. The content of sy-subrc has to be closely examined to ascertain the result of the authorization check and react accordingly.
REPORT demo_authorithy_check.
PARAMETERS pa_carr LIKE sflight-carrid.
DATA wa_flights LIKE demo_focc.
AT SELECTION-SCREEN.
AUTHORITY-CHECK OBJECT 'S_CARRID'
 ID 'CARRID' FIELD pa_carr
 ID 'ACTVT' FIELD '03'.
IF sy-subrc = 4.
 MESSAGE e045(sabapdocu) WITH pa_carr.
ELSEIF sy-subrc <> 0.
 MESSAGE e184(sabapdocu) WITH text-010.
ENDIF.
START-OF-SELECTION.
SELECT carrid connid fldate seatsmax seatsocc
 FROM sflight
 INTO CORRESPONDING FIELDS OF wa_flights
 WHERE carrid = pa_carr.
 WRITE: / wa_flights-carrid,
 wa_flights-connid,
 wa_flights-fldate,
 wa_flights-seatsmax,
 wa_flights-seatsocc.
ENDSELECT.
Regards
Hitesh

How to find Transaction for a Known Table maintenance View

Hello Friends,
May I know how to find transaction for a known table maintenance View.
Thanks,
Best Regards,
Sudhanshu Garg

Goto SE16 Transaction and enter TSTCP Table
Here PARAM = /SM30 VIEWNAME=Table name*;UPDATE=X;
enter table name in bold.
Thanks
Seshu

How to create F4 for the standard transaction

Hi all ,
How to create F4 for the standard transaction for a particular field .
Bye

Santosh,
You can create F4 values for a field in a standard Transaction .
1. First search for a standard search help meeting your requirement .
2. If you don't find one, create your own custom (z) serach help .
( 1 is preferable )
After that, include that serch help to the standard field in the transaction .
For this u need to go to the screen
( F1->F9-> screen-> Field )
Click on the property of the field and include the search help .
You ll require the access key from the basisi guys as u r changing standard .
Hope it helps,
~ laxmi
Reward for helpful answers

How to create transaction for table maintinance generator

Similar Messages

Maybe you are looking for