How to customise the URL on endsession button and point it to a third-party Application?

Hello ,
I have a scenario where i want to redirect to a third-party application instead of OPA summary screen on hitting the close-->end session button.
How to customize the URL behind the end session button to point to the third-party URL?
Thanks,
Charu

You can use velocity templates and javascript to achieve what you need.
Update confirm_end_session_screen.vm to
1. dynamically call the end session URL using ajax(?) to actually close the active OPA session
2. redirect user to the third-party application when the OPA session is closed

Similar Messages

  • How do i revert back to a OS X 10.5 without losing third party applications

    Hi,
    i have recently installed my HP printer CD software, after i did this it started to cause problems with some programmes, so i uninstalled it.
    However since doing this i have lost the relevant printer driver (however have now managed to print but do not have most of the functions e.g. print quality levels etc) and now want to revert my system back to a state when it was working fine. i have time machine and leopard cd and go through the process as described on the apple website however i have not done the restore from time machine back ups as i'm not sure if i will lose my third party applications (some of which i dont have the cd's for as they came pre-installed). can anyone help, will i lose my third party applications?

    Have you been using Spotlight to backup?
    Your system installation disks let you restore the system from the Spotlight backup, if you backed up your entire system with Spotlight.

  • How to access the URL on page load and open it in the new tab of browser

    Hi All,
    I am using Jdeveloper 11.1.1.5 and i have one page "Hello.jspx" and one data control consist of two attributes :-one is "id" and other is "url".
    The datacontrol has been created from the WebService.
    Now my requirement is : -
    whenever i run the page "Hello.jspx" , then on page load the url attribute should get accessed and should be opened in a new window or tab of the browser.As the url contains the information about the document.
    Hello.jspx page doesn't contain any bindings of the url attribute.
    I had thought of using the PhaseListener class and use the onPageLoad method .But how do i get the url from the dataControl and open it in the other tab of the browser on page load.
    Please suggest!!!!
    Thanks.

    Hi,
    I don't think this can be done this way. I would think that you need to execute JavaScript upon Hello.jspx load to open a new window and pass the URL to it
    Frank

  • When I click on "Sign in to Sync" the page "about:accounts" shows error "The URL is not valid and cannot be loaded." How do I fix this so I can use Sync?

    When I click on the three-bar icon (top right) and then on "Sign in to Sync" a new tab opens attempting to load "about:accounts" . . . the page that loads is an error . . . "Problem loading page" shows up on the tab and the page displays:
    The address isn't valid
    The URL is not valid and cannot be loaded.
    Web addresses are usually written like http://www.example.com/
    Make sure that you're using forward slashes (i.e. /).
    Try again
    I am running Firefox 30.0 on a Dell XPS-18 and Windows 8.0.
    I cannot access "about:accounts" at all. How do I fix this?

    The about:accounts page is a valid page in the current Firefox release.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • When I click on the Home button, I get a message saying "The URL is not valid and cannot be loaded????????"

    When I first turn on Firefox, I only get a blank "new tab". It does not go to the Firefox Home Page. When I click on the Home button in the top right, I get the message "The URL is not valid and cannot be loaded." How can I fix this so when I open Firefox it goes right to the Firefox Home Page (or a home page of my own choosing)??

    [[How to set the home page]] has detailed instructions.
    To get back to the default home page:
    # At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP) and then click Options.
    # Select the General panel.
    # In the Startup box, click Restore to Default.
    If this isn't "sticking", you may have malware or an extension that is preventing you from making the change.

  • How to customise the backdrop in photo booth application?

    how to customise the backdrop in photo booth application?

    If you’re using Photo Booth in full screen, move the pointer to the top of the screen, then click the Exit Full Screen button.
    If you’re viewing a photo or a video, click the View Video Preview button.
    Click the Effects button.
    Browse through the backdrops until you reach User Backdrops.
    Drag a photo or video to one of the User Backdrop frames. You can drag a picture or video from your desktop, the Finder, iMovie, iPhoto, or Safari.

  • How to edit the url of sites in new tab page of firefox

    If we open newtab in firefox 9 tabs are visible. How to edit the url address of the previously pinned tab.

    I found solution for this problem.
    1. Type ''about:config'' in firefox url and click enter.
    2. An alert will be shown on click on "I'll be careful, I promise!" button.
    3. Type ''browser.newtabpage.pinned'' in textbox and click enter.
    4. Right click and select '''Modify''' option to edit the url address.
    ''I want to change this url address''
    [{"url":"http://localhost:8080/Admin/login","title":null},]
    After change the url address in firefox is
    [{"url":"http://localhost:8080/Admin","title":"Admin"},]

  • How to open a URL without session ID and reuse the current browser session?

    Hi All,
    I have a question about HTMLDB 2.0
    How to open a URL without session ID and reuse the current browser session?
    That was the behaviour in HTMLDB 1.6 ...
    My usecase for this is the following:
    We have written an issue tracking application, which sends e-mail to the interested users, when something happens.
    In these email we've put a link to some page, with some parameters in the URL.
    The idea is for the user to be easy to click on the hyperlink and to see the details of the ticket.
    When the user clicks on such a link he is directed to a login screen (page 101) and he enters his Username and password, and is then forwarded to the details for the ticket.
    Then he receives another email (e.g. for another ticked). He clicks on the link and :
    a) in HTMLDB 1.6 he goes to the details as he didn't close his browser and session is remembered
    b) in HTMLDB 2.0 he is prompted to enter username, password with the username populated
    Please tell me how can I achieve the same behaviour in HTMLDB2.0 as it was in HTMLDB 1.6.
    I understand this change is somehow security related, althogh I don't understand how. If you can explain this either I would be very happy?
    Best regards,
    Mihail Daskalov

    Mihail - I detailed a couple of approaches here: Re: Application Link
    Scott

  • I have Firefox 6.0 running under Windows XL. When I forward an email with a URL in it, my recipients tell me the URL is not highlighted and they have to cut and paste it into their browser. Why? How can I get my forwarded URLs to be highlighted?

    I have Firefox 6.0 running under Windows XL. When I forward an email with a URL in it, my recipients tell me the URL is not highlighted and they have to cut and paste it into their browser. Why? How can I get my forwarded URLs to be highlighted?

    If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
    If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
    http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
    This one will create the form, database and send out the emails...
    http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
    The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
    http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • How to change the url of "Add New Item" of a particular list in SharePoint 2013???

    Hi Guys,
    How to change the url of "Add New Item" of a particular list in SharePoint 2013???
    I need to redirect it into the page where I have created my Visual web part.
    Please suggest
    Warm Regards,
    Tony Joy

    Hi,
         There are multiple ways to change the form url like javascript, SharePoint designer, custom code, editing default form to have custom web part etc, Please follow the url below that describe diffent methods and steps
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/ec2769a0-683c-4023-8804-b596e4f92a3a/change-default-forms-on-custom-list?forum=sharepointcustomizationlegacy
    Hope it helps!!!
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. Thanks, Ajeet

  • Private Browsing function is suddenly not working. Error message :"The URL is not valid and cannot be loaded." How can I repair?

    Private Browsing function is suddenly not working. Error message :"The URL is not valid and cannot be loaded."
    How can I fix it?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • How to design the URL?

    How to design the URL?i know that the Google  will take down the good URL.such as the staticize URL Google will like more..

    A site's URL structure should be as simple as possible. Consider organizing your content so that URLs are constructed logically and in a manner that is most intelligible to humans (when possible, readable words rather than long ID numbers). For example, if you're searching for information about aviation, a URL like http://en.wikipedia.org/wiki/Aviation will help you decide whether to click that link. A URL like http://www.example.com/index.php?id_sezione=360&sid=3a5ebc944f41daa6f849f730f1, is much less appealing to users.
    Consider using punctuation in your URLs. The URL http://www.example.com/green-dress.html is much more useful to us than http://www.example.com/greendress.html. Google recommends that you use hyphens (-) instead of underscores (_) in your URLs.
    Overly complex URLs, especially those containing multiple parameters, can cause a problems for crawlers by creating unnecessarily high numbers of URLs that point to identical or similar content on your site. As a result, Googlebot may consume much more bandwidth than necessary, or may be unable to completely index all the content on your site.

  • How to open the Url type in Attachments Table

    Hi All,
    If we attached the any files, files are stored in the fnd_lobs table, pickup the data from the fnd lobs table and stored in the local system but if attached the url type how to open the url type.is there any standard ?
    Thanks,
    Venkat

    You can do it one of two ways:
    1. Insert some CSS that will change the target to "_new".
    2. Change the field that the user enters information in to a single line of text, then create a calculated column that is:
    =CONCATENATE("<a href=",[URL Field]." target=new>Click here</a>")
    Format that as a number.
    Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

  • STMS: how to hide the Import All Requests button in the import queue view?

    Hi All,
    I'd like to know how to hide the "Import all requests" button in the import queue view.
    Thanks a lot for your answers.
    G.

    Hi,
    about hiding i have a doubt but u can inactivate by following procedure,
    As referred in a thread:
    On the domain controller, in STMS>overview>systems>(double click the one you want to change)>Select Transport Tool tab and click on change. Add Import_single_only value 1, import_single_strategy value 1 and no_import_all value 1. Save distribute and activate.
    or
    Refer to OSS NOTE 194000.
    Thanks & regards.

  • How to add the Social Network share buttons (that work!) to share INDIVIDUAL post from the same page

    How to add the Social Network share buttons like Facebook and Twitter (that work!) to share INDIVIDUAL post on the same web address in Dreamweaver? I have searched on google and youtube tutorials, but most of them are "Blogger" and  "Wordpress" users.. The only Dreamweaver tutorial is the one that share THE WHOLE page (not individual post on a page). There is Facebook Integration on Dreamweaver (29 Dollar download from Adobe) but so far no review about it so  I don't want to spend money for something I don't know.  There is also Sharrre but they say there is a bug. It seems like everyone out there use these buttons but I start to get crazy since it seems easy but it's actually complicated to get the html or js script to paste on! Any help would be very much appreciated. Thanks.

    Cool,
    Here is my test site. I have made at least 3 articles (Fashion, Sport, and Art) with thumbnail images on it.
    http://andiratih.free.fr/
    On each article I add the share buttons from "AddThis".
    However, if I want to ONLY share the "Sport article" on Facebook by clicking share-->Facebook, then the feed is scrambling my images on other articles too and it eventually just share the whole page instead of one particular article.
    It is now fine since I only build 3 articles, but as you see when the page is getting long with at least 20 articles it will not be ok.
    I don't want to make individual page for each article either, since they are just short article each, and I intend to use this page as a welcome page to update the latest activity every half year.
    I have seen many bloggers or pages where even if they have many article on ONE page, they are able to share one particular article to Facebook, and when we click (via Facebook) it will redirect us to exactly that particular article even if the article is on the bottom of the page, and not just bring me to the top of the page only and have to search by myself by scrolling to the bottom of the page to see the article.
    Infact, Bloggers and Wordpress seems to have the tool for that so that we can just click and add. I am not a Blogger or Wordpress users but I saw youtube tutorials on that.
    I have heard about Dreamweaver behavior, and does this will help to achieve what I want (sorry I'm a beginner)? I also heard about meta tags but I don't know how and where to get them to paste to my html source code.
    I have found several sites where the person show how to do this, but when I tried it didn't work, and in fact some other discussions about this are never solved.
    Thanks for your input.

Maybe you are looking for