How to debug if we get problem?

I am using XMLP standalone version. If there is a problem in creating the pdf output, eg array index error, is there a method/utility to debug where is the problem?
Thanks

Go to http://iforgot.apple.com and sign in with your ID. A new password will be sent to your associated email address. If this doesn't work you will have to contact Support. Go to https://getsupport.apple.com; click' See all products and services', then 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password'.

Similar Messages

How many FLVs before you get problems?

I have built a small project in Captivate 4 (30 screens with 15 FLV files ranging in duration from 30 - 60 ; FLV sizes are between 3 and 6 mb). I am encountering the following issue:
Course plays fine when FLVs are unsynched
FLVs "stutter" randomly when synched to project
The video was shot at 29.97 FPS but I have re-exported it at 30 FPS. I also set preload to 100% and strangely this reduced the severity of the issue but did not fix it (I say strange as the FLVs should not be affected by the pre-loader)
Has anyone else experienced this issue? My questions are:
How can I synch FLVs without stutter during playback
Is there a limt on the number of FLVs that can be included in an individual project?
Is there a limit on the total duration of FLV footage that can be included in a project?
Much zen and good wishes to all who reply (and potential consulting gigs!!!)
Cheers
Mark

yofromoslo wrote:
How many times do you get a new iPhone because of manufacturing defects, before you can ask for an newer model?
You don't. Apple's warranty provides for replacing your device with an identical model (same model, carrier, capacity & color).
And you aren't getting a new iPhone. You'll be getting a remanufactured iPhone, which has gone through a more thorough inspection than any new iPhone ever does.
If you want a newer model, then trade-in or privately sell your current device and use the proceeds towards purchasing another device.

How to debug file content conversion problems?

Hi,
I'm trying to debug a file content conversion problem. I'm mapping a few nodes in an IDOC to a file of fixed length fields. I'm using the "<Node A>.fieldFixedLengths", "<Node B>.fieldFixedLengths", "<Node C>.fieldFixedLengths", etc. parameters to specify the fixed length records.
However, a certain node (for e.g. Node B) is causing a problem and if it is present in the IDOC, the output file does not get created. Upon checking the XI monitor, I notice that the file gets mapped correctly and thus the problem lies when the file adapter does the file content conversion. How do I debug this because there is no descriptive error in the XI log? If this node is not present, the file gets generated fine.
Thanks,
Basant Gupta

Hi,
If your SXMB_MONI shows, success status, then go to RWB->Message Monitoring->Message display tool and then check Audit log for the analysis,
So it wil help you debug the situation.
If there is no error, then check RWB->Component Monitoring->Adapter Monitoring for you file communciation channel..
/people/michal.krawczyk2/blog/2005/01/02/simple-adapter-and-message-monitoring
Regards,
Moorthy

How to debug ACE FT Sync Problems ?

Hello,
in one of our contexts we have a sync problem on the standby unit.
"sh ft group detail" gives
"Running cfg sync status : Error on Standby device when applying configuration file replicated from active", while "Startup cfg sync status" is OK.
"sh crypto files" and "dir disk0:" produce the same output on both ACE units.
How can we analyze the problem ?

Hi Gilles,
unfortunately I can not see a meaningful message. Can you please have a look at the attachments (taken from the standby machine) ?
Thank you very much in advance.

Dock application gets killed itself on Lion, how to debug this issue?

Hi, Dock application gets killed itself and it dissappears and relaunches itself after for few seconds, This is happening for every 5 min or so. it is quite annoying problem. how to debug this issue? any help?

When I look the system logs - there is an exception each time I try to run the application or open a window:
9/5/09 10:33:12 PM Linear[23545] Cannot create BOOL from object <Regression: 0x1461f0> of class Regression

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something"sign... it just doesn't start the system....

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
Please help
Marcelo

If there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
Gray, Blue or White screen at boot, w/spinner/progress bar
Also take this time to backup your users files off the machine if possible.
Most commonly used backup methods
Sometime that won't work and you need to do more
..Step by Step to fix your Mac

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

Ockeim getting problem in imovie & iphoto update.my 1st id is bld,i changed my id but during update it is showing my previous id.please help me how should i update my app by new id.

im getting problem in imovie & iphoto update.my 1st id is blocked,i changed my id but during update it is showing my previous id.please help me how should i update my app with my new id.

Contact App Store support. There's a link on the right hand side of the App Store Window. They're the only ones who can sort out account issues.

HT4623 i got apple iphone 3 and i getting problem to activate that its showing message could not activate plz help me how can i activate my phone?

i got apple iphone 3 and i getting problem to activate that its showing message could not activate plz help me how can i activate my phone?

Most likely your phone is carrier locked to a different carrier than the SIM card you're using. It will activate and operate only with the carrier to which it's locked.

How can we debug an SRM workflow problem?

Q: How can we debug an SRM workflow problem?

Hi,
In SRM system using transaction SWI6 you can troubleshoot the workflow process.
if you are using N step badi in the workflow process, we can debug the badi BBP_WFL_APPROV_BADI
method GET_REMAING_APPROVERS
if required please take a help of Abap consultant to debug...
Thanks & Regards,
prasad.s

How to debug DAQ VIs (problem with data)

I am trying to debug (and understand) the attached VI. I’m not asking anyone to analyze/debug it, since it is far more than an example; I am new to these forums and feel like asking such a thing would be inappropriate.
I would like advice on how to debug it. I am also going to describe my problem to see if the cause may be obvious to someone.
The outputs of the "Angle Calc" sub-vi are fed into a state machine. The state machine actuates outputs to move a motor and measures changing angles. It first moves up/down, then left/right. The attached VI is called by a top-level VI and the front panel is not usually open. For some reason, when the front panel is opened, it behaves differently when it is called. The behavior only changes for the right/left movements.
Here's where I'm hoping someone can point out some better debugging methods for me.
I have been using the Express Write to LVM File VI and the Convert to Dynamic Data function to write acquired data to text files for analysis after the acquisition has completed. Are there better methods recommended for doing this? I wish I could run through the code while recording the execution and then step through a playback of it!
As for the specific problem I am having...
In the "Right Find Stall" case, the signal wired from the "Angle Calc" VI (array size 100) is connected to a Max/Min Array function. When I log the data coming from the Min/Max function, I see an alternation between valid data and 0 (i.e. 12.2, 0, 13.3, 0, 14.0, 0, 14.5, 0...). When I log the data being fed into the Min/Max function I do not see 0s.
A guess of mine is that the array is empty and therefore no data is logged but Min/Max returns a 0 (not sure why this would happen). I also have no idea why this would ALWAYS happen with the front panel opened. I have seen the effect with the front panel closed, but never to the same degree; usually just a seemingly random zero or two but not a pattern of every other point...
Thanks all,
Dave
Attachments:
Functional_Test.vi ‏2710 KB

Angle_calc receives array controls in and passes array indicators out. It performs a trig function and a bit of multiplication.
I'll check out the Write to Spreadsheet File VI, haven't used it in the past. If it will allow me to write text out that'll be enough reason for me to stop using the Express VI.
I've used Execution Highlighting and stepping before but with the data acquisition by the time the application makes it around to the next read the DAQ card has sampled a ton of data and the data coming in is no longer useful (a different state should be active by then).
I do think the problem is related to the computer slowing down with the front panel open. I've logged the 'backlog' number of the Read function and found that the number in there is greater than 0 much more often when the VI's front panel is open and that I've seen relations between the 0s that I discussed earlier and the backlog going above 0 (usually the scan after a non-0 backlog seems to be a problem).
I need to familiarize myself with the DAQ basics, the buffer, backlog, and relation to sampling rate, etc.
In a simple VI I just wrote, I noticed that if I increased the sampling rate high enough, data being acquired into a chart cuts-out on a regular basis; instead of a smooth line, I see small dashes or dots of data (spaces in between). I don't understand this- I would expect data to be lost but not "no data" to be read in. I think understanding what is happening here would be helpful.

How and where can I get intel hd 4000 graphics drivers and controll panel to 3d settings ... I want to turn off my vertical sync! please someone has to help me with this problem!

How and where can I get intel hd 4000 graphics drivers and controll panel to 3d settings ... I want to turn off my vertical sync! please someone has to help me with this problem!

So are there any other ways to get there, or to change options there?
And is it plausible to use 3d vision (like nvidia its one) but than without an nvidia graphics card. for watching movie's and gaming etc.
Thank you!

HOW TO DEBUG DB COLLECTOR - DATE FORMAT PROBLEM

Hi All,
i created a oracle collector. i have a query like below;
select
MY_DATE,
TO_CHAR('MY_DATE','YYYY/MM/DD HH24:MI:SS','nls_date_language=AMERICAN')
MDATE
WHERE
MY_DATE >= TO_DATE('%s','YYYY/MM/DD
HH24:MI:SS','nls_date_language=AMERICAN') and rownum <= %d
ORDER BY
MY_DATE
and i am returning 'return input.RXMap.col_MDATE;'
When i run the collector it is giving to me ORA-01840 input value not
long enough for date format so i want to debug and see the value of %s.
When run the collector debug mod always saying to me NODATA. Anybody
know how can debug and how can see %s value ??
ibasaran
ibasaran's Profile: https://forums.netiq.com/member.php?userid=2826
View this thread: https://forums.netiq.com/showthread.php?t=46068

ibasaran;221632 Wrote:
> Hi All,
>
> i created a oracle collector. i have a query like below;
>
> select
> MY_DATE,
> TO_CHAR('MY_DATE','YYYY/MM/DD HH24:MI:SS','nls_date_language=AMERICAN')
> MDATE
>
> WHERE
> MY_DATE >= TO_DATE('%s','YYYY/MM/DD
> HH24:MI:SS','nls_date_language=AMERICAN') and rownum <= %d
>
> ORDER BY
> MY_DATE
>
> and i am returning 'return input.RXMap.col_MDATE;'
>
> When i run the collector it is giving to me ORA-01840 input value not
> long enough for date format so i want to debug and see the value of %s.
>
> When run the collector debug mod always saying to me NODATA. Anybody
> know how can debug and how can see %s value ??
Make sure you start the event source after you start debugging.
brandon.langley
brandon.langley's Profile: https://forums.netiq.com/member.php?userid=350
View this thread: https://forums.netiq.com/showthread.php?t=46068

How To: Debug missing Drivers in MDT

The definitive post on missing drivers in MDT (most comprehensive list I've done so far)…
Please to NOT post questions from this thread, instead create a new thread.
How to debug Network Driver Problems
One of the earliest hurdles an MDT administrator will come across is the management of device drivers, specifically networking drivers. With most other drivers, like Audio, printer, and video drivers, a quick call to Windows Update or install over the network
will resolve the Installation. However unless the Network (and storage) Drivers are installed into Windows from the start, it will be much more difficult to install the rest of the system.
This post should help you get started if you find a machine that did not install a device driver properly, and you want to know how to find and import the correct drivers.
Installing network drivers in the
full OS
Step 1 - Try network connection again
It's possible that you might get a DHCP error from MDT, but when you try again later to connect the Deployment Share it works! This may be caused by a slow or malfunctioning DHCP server in your network. Re-check your DHCP servers, ensure that PortFast is enabled
on your routers. If all else fails get your network administrators to document the DHCP delay. A long delay in modern networks is unnecessary.
Step 2 - Verify connectivity
You may not have a driver problem but a network problem. Check the physical connection on the computer (Network installs on MDT *REQUIRE* a wired network connection, no Wi-Fi). Open a web browser. Check the IP Address (ipconfig.exe /all). Ping the Deployment
Server, manually connect to the Deployment Share. IF you can't connect to the Deployment Share, neither can MDT.
Step 3 - Find the Correct Driver Package
Before you load the driver into MDT, first verify that you have the correct driver. There are scenarios where you may *think* you have the correct driver, but the driver will never run because the package is designed for a different OS/SKU/Platform/whatever.
Install the driver package by:
  ○ Open the Device Manager (devmgmt.msc).
  ○ Find the network device in the list (ensure this is the wired device, not the wireless device)
  ○ Right click on "Properties" and click on the "Details" tab.
  ○ From the "Details" tab, select the property "Hardware Ids" select all the values, and copy to the clipboard, it would be a good idea to save for later. Should look something like:
      PCI\VEN_8086&DEV_1502&SUBSYS_21F317AA&REV_04
      PCI\VEN_8086&DEV_1502&SUBSYS_21F317AA
      PCI\VEN_8086&DEV_1502&CC_020000
      PCI\VEN_8086&DEV_1502&CC_0200
  ○ From the "Driver" tab, click on "Update Driver…", click on "Browse my computer for driver software" locate the driver package on the local machine or USB Drive, and install the package.
  ○ You should get a confirmation that the driver package was installed.
  ○ IF you do not get confirmation, MDT driver installation may not work.
Windows will install the driver starting with the *.inf install package, and will typically include a *.sys (binary) and a *.cat (digital Signature). If the driver package has been re-packaged into a *.cab, *.zip, or other compressed *.exe file, the
package must be extracted first. This is a hard requirement for any driver used by MDT and/or SCCM. All driver packages that are signed by Microsoft (WHQL) will be installed from the *.inf file, and you should only use devices that have the Microsoft WHQL
Logo as a sign of quality.
If you need a help on where to find driver packages for your devices, the 3 largest Computer OEM manufacturers supply drivers grouped by Make and Model that are easily imported into MDT and SCCM. See:
http://deploymentbunny.com/2014/07/08/back-to-basicwhere-to-find-drivers-for-servers-and-clients/
Step 4 - Load driver into MDT
If you have more than 20 driver packages, or if you anticipate you will have more than 20 drivers, you should start grouping your drivers in sub-folders for organization. One popular method is to group by Computer Make and Model. Ensure that you are using the
correct Driver Selection Profile in your task sequence. If you are unsure, disable any selection profile(s) to ensure the driver is installed correctly.
Step 5 - Run the full MDT installation
During installation MDT will perform the following:
  ○ Run the PNPEnum.exe utility and capture output to PnPEnum.xml. The VEN_Xxxx and DEV_Yyyy from the "HardwareIDs" property above must be present in this list. Otherwise we won't have a match.
  ○ Search through the %DeployRoot%\control\drivers.xml file looking for a match for the HardwareID. MDT may filter the search based on the folder search type.
  ○ MDT will copy each matching driver to the local c:\drivers directory using the xcopy.exe command. You can search (grep) for the string "xcopy" in the ZTIDrivers.log file, that will get you list of all driver packages matched by MDT.
  ○ MDT will allow the machine to boot into the NEW OS, and Driver Installation will begin in the OS. IF there are multiple drivers found and copied locally, the Windows (not MDT) will determine the best one. The c:\windows\inf\SetupAPI.*.log files
will detail which drivers copied locally were installed (or *not* installed).
Installing Network Drivers in
WinPE
Step 6 - Try the network connection again
(See above
Step 7 - Verify Connectivity from within WinPE
Verifying network connectivity will be a bit more difficult in WinPE, since we have a limited User Interface, so all investigation must be done in the debugging mode (Press F8) cmd.exe
  ○ Try connecting to the Deployment Share:
  c:\> net use * \\MDT\DeploymentShare$ /u:UserDomain\UserName *
  ○ Try pinging the Deployment Server:
  c:\> Ping.exe MDT.Corp.contoso.com
  ○ Verify that you have an IP address ( ipconfig /all ) If you have an AutoConfiguration address - Driver OK - WinPE can't reach the DHCP server. If you have "Media Disconnected" - Driver OK - Physical adapter not plugged to network. If
no devices are listed - Driver bad - Driver not installed.
  ○ Check the x:\windows\system32\WpeInit.log - This log will show the network driver (if found) being installed.
Step 8 - Verify driver packages are getting included into WinPE
Firstly, verify the correct driver package from within the full OS above. By default MDT will import *all* Storage and Networking drivers into your WinPE image. However it is possible to change the subset of files copied via "Selection Profile" or
other method. Cross check your WinPE Driver Settings.
  ○ From within the MDT console, right click on the root of your Deployment Share and select properties.
  ○ Click on the "Windows PE" tab, and the "Drivers and Patches" sub tab for both x86 and x64.
  ○ Your Network Drivers package must be in the "Selection Profile" if enabled.
Finally verify that the correct Network Driver package is being copied to WinPE. If necessary this may include setting up a debugger to watch the MDT Provider build the WinPE Image from scratch. My preference is to use the SysInternals
http://live.sysinternals.com/Dbgview.exe tool.
  ○ Open up the MDT console.
  ○ Download and run the DbgView.exe tool.
  ○ Update the deployment share in question.
  ○ The DbgView tool should show what drivers were copied to each WinPE Image.
Other
Whenever you add a driver into the MDT console, you must update the deployment share for that drivers to be added to your WinPE Image. If you are unsure, select "Completely regenerate the boot images." to ensure the drivers is imported. Additionally,
you must copy the updated LitetouchPE_x??.wim and *.iso files to the other consumers of the WinPE image like WDS/PXE and or any USB offline media.
Note that some Broadcom NetXtreme class of drivers have a multi-function driver architecture that may have difficulty loading in WinPE. Ensure that you load the "RIS" class of drivers from Broadcom in your MDT environment.
Note that by default MDT does *NOT* support the installation of Windows over Wireless network devices (Wi-Fi). The MDT installation sources must either be available through wired networking, or offline (USB Flash) media.
This post does not discuss origination of drivers within MDT ( Chaos vs. Total Control ), that is a different topic.
http://www.deploymentresearch.com/Research/tabid/62/EntryId/112/MDT-2013-Lite-Touch-Driver-Management.aspx
Further Help
If you are still having problems with drivers in via MDT, ask the experts in the MDT Technet Forum:
Include a short description of the problem. Including the Make/Mode if necessary.
Include the HardwareIDs from the Device Manager (Devmgmt.msc) into the post (from above).
Copy your known good driver package (step 3 above) to OneDrive.
Copy the following log files to a public site like OneDrive and include the link:
  ○ PnpEnum.xml (from Client)
  ○ Bdd.log (From Client) - or at least the ZTIDrivers.log file.
  ○ c:\windows\inf\SetupAPI.*.log (from client)
  ○ %DeployRoot%\control\Driver*.xml
  ○ %DeployRoot%\control\SelectionProfile*.xml
  ○ %DeployRoot%\control\settings.xml (if problems in WinPE)
  ○ x:\windows\System32\WpeInit.log (if problems in WinPE)
  ○ If the MDT server is not including your driver package in WinPE include the DBGView log.
This post is by Keith Garner - Keith was a developer on the MDT team where he developed the ZTIDrivers.wsf script, he also worked for the Windows Hardware Quality Labs as a technical PM on Driver Quality, and developed samples for the
Microsoft Device Driver Kit (DDK) specifically around the area of Device Driver installation in the OS (Windows NT 5.0, 2000 and Windows XP). (So yes, I know drivers :^).
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

OK. I have redone the drivers for WinPE which has reduced the image size by about 200MB. Unfortunately the problem persists.
Is there anyway to turn on some sort of boot logging so I can see what driver it is failing on?
I am also still seeing the weird behavior of it working over PXE but blue screens when booting from USB. Can anyone explain that?
JJ

How to debug sharepoint 2013 provider hosted app?

We developed SharePoint 2013 provider hosted app using MVC 5 Entity Framework of Database first and publish in Windows Azure site as well as deployed that project to our SharePoint app Catalog. We need to change Windows azure site so we
changed to publish in another Windows Azure site and deployed again to our SharePoint app Catalog. No problem the app is working after we changed Windows Azure site. I am new of this technology I faced so hard of changed
existing Windows Azure site to New Windows Azure site. Please tell me how to debug the SharePoint Provider hosted app? Please tell me step by step process.
Thanks in Advance.

Hi,
According to your description, you might want to know how to debug provider hosted app.
To get a quick start, I would suggest you take a look at the link below about
Debugging SharePoint Apps That Are Hosted In Windows Azure Web Sites:
http://blogs.technet.com/b/speschka/archive/2013/11/25/debugging-sharepoint-apps-that-are-hosted-in-windows-azure-web-sites.aspx
Another two similar articles for your reference:
http://sharepointfieldnotes.blogspot.jp/2013/03/making-it-easy-to-develop-and-debug.html
http://blogs.msdn.com/b/officeapps/archive/2013/01/03/debugging-remote-event-receivers-with-visual-studio.aspx
Best regards,
Patrick
Patrick Liang
TechNet Community Support

How to debug if we get problem?

Similar Messages

Maybe you are looking for