How to debug this error? trying to load excel file to Database

SSIS package "c:\users\asubedi\documents\visual studio 2012\Projects\Integration Services Project1\Integration Services Project1\PackageToLoadBuyerDedupe.dtsx" starting.
Information: 0x4004300A at BuyerDedupe, SSIS.Pipeline: Validation phase is beginning.
Error: 0xC0209303 at PackageToLoadBuyerDedupe, Connection manager "Excel Connection Manager": The requested OLE DB provider Microsoft.ACE.OLEDB.12.0 is not registered. If the 64-bit driver is not installed, run the package in 32-bit mode. Error code: 0x00000000.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
Error: 0xC001002B at PackageToLoadBuyerDedupe, Connection manager "Excel Connection Manager": The 'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine. For more information, see http://go.microsoft.com/fwlink/?LinkId=219816
Error: 0xC020801C at BuyerDedupe, Excel Source [2]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0209303. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at BuyerDedupe, SSIS.Pipeline: Excel Source failed validation and returned error code 0xC020801C.
Error: 0xC004700C at BuyerDedupe, SSIS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at BuyerDedupe: There were errors during task validation.
SSIS package "c:\users\asubedi\documents\visual studio 2012\Projects\Integration Services Project1\Integration Services Project1\PackageToLoadBuyerDedupe.dtsx" finished: Failure.
how to debug this issue?

Hi Arjunji,
The issue occurs because you have only 32-bit Microsoft ACE 12.0 OLEDB drivers installed, however, the package runs in 64-bit runtime mode which requires 64-bit drivers.
To avoid this issue, you need to either install the 64-bit
Microsoft Access Database Engine 2010 Redistributable or run the package in 32-bit runtime mode. To run the package in 32-bit runtime mode, in SSDT, you can set the Run64BitRuntime property of the IS project to False; in a SQL Server Agent job, you can
configure the SSIS Package Job step and check the “Use 32 bit run time” option.
In addition, please note that the 32-bit install file of Microsoft Access Database Engine 2010 Redistributable and the 64-bit one cannot be installed side by side on a single server. However, if your current ACE 12.0 OLE DB drivers are installed by 32-bit
Office suit, you can go ahead and install the 64-bit Microsoft Access Database Engine 2010 Redistributable.
Regards,
Mike Yin
TechNet Community Support

Similar Messages

Can anyone tell me how to fix this error I am receiving: LabView: File not found. VI "Mobile Display.vi" was stopped at unknown " " at a call to "Mobile Display.vi"?

Can someone help me please? I am receiving this error everytime I attempt to execute my application:
LabView: File not found. The file might have been moved or deleted, or the file path might be incorrectly formated for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
VI "Mobile Display.vi" was stopped at unknown " " at a call to "Mobile Display.vi"
Attachments:
labview error.jpg ‏176 KB

We cannot help without additional information:
Are you running your code
...in the development system?
...as a standalone application?
...deployed to an embedded target?
If it is a built application, do you explicitly include dynamically called VIs in the build specification?
Who wrote the program? Do you have access to the code?
How is this VI called? Is there sufficient error handling?
Do you manipulate paths as strings or as proper path datatypes with the strip path/build path primitives etc.?
Is it running on the same OS used to develop it ...
LabVIEW Champion . Do more with less code and in less time .

How to debug this error.

I wrote the managed bean for shuttle.But i m getting so many errors.Can anybody help me on this.
Error(62,23): type oracle.insurance.viking.asset.view.List does not take parameters
Error(47,41): cannot find method findIteratorBinding(java.lang.String)
Error(48,30): incompatible types
Error(49,25): cannot find method getAllRowInRange()
Error(51,32): cannot find method getAttribute(java.lang.String)
Error(66,41): cannot find method findIteratorBinding(java.lang.String)
Error(67,13): type oracle.insurance.viking.asset.view.List does not take parameters
Error(69,25): cannot find method getAllRowInRange()
Error(71,45): cannot find method getAttribute(java.lang.String)
Error(71,83): cannot find method getAttribute(java.lang.String)
Error(93,25): cannot find method getAllRowInRange()
Error(94,11): cannot find method remove()
Error(96,40): cannot find method size()
Error(97,46): cannot find method size()
Error(99,39): cannot find variable STATUS_INITIALIZED
Error(100,52): cannot find method getCurrentAssetCategoryId()
Error(101,48): cannot find method getSelectedAttributes()
Error(102,41): insertRow(oracle.jbo.Row) in oracle.jbo.RowIterator cannot be applied to (com.sun.rowset.internal.Row)
Error(103,51): cannot find method getKey()
Error(122,21): cannot find method getOperationBinding(java.lang.String)

Can u just tell which all to import i have imported these...
import com.sun.rowset.internal.Row;
import com.sun.xml.internal.ws.wsdl.writer.document.Binding;
import java.util.ArrayList;
import javax.faces.event.ValueChangeEvent;
import javax.faces.model.SelectItem;
import oracle.adf.model.AttributeBinding;
import oracle.adf.model.BindingContainer;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCBindingContainer;
import oracle.adf.model.binding.DCIteratorBinding;
import oracle.binding.OperationBinding;

RapidMarts - "Open file error" R3C-150607 loading from file

Hello experts.
We are installing RapidMarts for the SA-module, but when executing the main workflow in Data services we get an error trying to load the file dates.dat.
The generated ABAP looks just fine, and the file exists where it should be (in SAP working directory), but still not able to load it.
This is the error msg:
Data flow DF TimeDim SAP - Execute ABAP program <E:/RM generated ABAP dir/TimeDim.aba> error > Open File Error -- E:/RM Working directory/dates.dat>.
We have the following setup:
Windows server
MS SQLserver 2005 database
SAP BO Dataservices v12.2.9.0
SAP BO RapidMarts for v12.2.0
Any good ideas on how to fix this?
Thanks in advance!
Best regards,
IngA

Hi again.
The problem is solved.
When configuring the R3 datastore in Dataservices we assigned the different directories (working dir, generated ABAP dir etc.) on a server that's NOT our R3-server.
When we changed this to use folders on our SAP-server it works just fine (for this at least)
Cheers, IngA

ERROR: ORA-12547: TNS:lost contact :- how do i debug this error

Hi all,
we have three 9i databases here( 3 server machines ). in my system i installed 10 g client and modified the tnsnames.ora to connect to these databases thru sqlplus. Now able to connect two of the databases but for the third one
when i try to connect it gives error
ERROR: ORA-12547: TNS:lost contact :- how do i debug this error
please guide me how to solve this error.
i checked the sid , service name etc. seems to be ok. ( Also compared with other two databases )
regards ravi

you can turn on net tracing by setting the following sqlnet.ora parameters:
TRACE_DIRECTORY_CLIENT = c:\temp
TRACE_UNIQUE_CLIENT = on
trace_level_client = admin
then review trace files or send them to oracle support to see the cause of this error

Can someone tell me how to fix this error in 10.4.11 on a G5 Quad Core 2.5GHz Tower...A valid video device could not be found for playback. [-70017]

Can someone tell me how to fix this error in 10.4.11 on a G5 Quad Core 2.5GHz Tower...A valid video device could not be found for playback. [-70017]

That's an error reported from DVD Player I believe...
kDVDErrorMissingGraphicsDevice = -70017, // A valid graphics device is not available.
There's some conjecture it has to do with HDCP, or Video Card problems, but the only 2 cures/fixes I found were Software related, one was cured by updating the OS, another by replacing the Video kexts.
I think this error also shows up if trying to use DVD player in Safe Mode, (too much research isn't good! ).
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware>Graphics/Displays and report like this...
NVIDIA GeForce 7800GT:
Chipset Model:          GeForce 7800GT
Type:          Display
Bus:          PCI
Slot:          SLOT-1
VRAM (Total):          256 MB
Vendor:          nVIDIA (0x10de)
Device ID:          0x0092
Revision ID:          0x00a1
ROM Revision:          2152.2
Displays:
VGA Display:
Resolution:          1920 x 1080 @ 60 Hz
Depth:          32-bit Color
Core Image:          Supported
Main Display:          Yes
Mirror:          Off
Online:          Yes
Quartz Extreme:          Supported
Display:
Status:          No display connected
Can't think of much to try at the moment, but perhaps reapplying the big 10.4.11 combo, Repair Permissions, & reboot would help, not sure.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html

Please tell me how to fix this error

Since yesterday, We have been loading data into the database through the sequel loader and suddenly today it is erroring out with the following error
Please tell me the solution how to tackle this error.
The error message is like this
C:\ImportUtility>prospect_load.cmd XES-QA_new tp tp1 C:\ImportUtilTest\output\PR
OSPECT_UPDATE_ATMCUSTOMERPROSPECTIMPORT_2010-12-23_10.28.22_435889360.CSV
Loading data in prospect table..
SQL*Loader: Release 10.1.0.2.0 - Production on Thu Dec 23 12:29:02 2010
Copyright (c) 1982, 2004, Oracle. All rights reserved.
kghalo bad size 0x2402d870
***** Internal heap ERROR KGHALO2 addr=00000000 ds=00FF8D54 *****
HEAP DUMP heap name="Alloc environm" desc=00FF8D54
extent sz=0x1024 alt=32767 het=32767 rec=0 flg=2 opc=2
parent=00FF8DF8 owner=00000000 nex=00000000 xsz=0x1038
EXTENT 0 addr=011937B8
Chunk 11937c0 sz= 4144 freeable "Alloc describe " ds=010585EC
EXTENT 1 addr=01192724
Chunk 119272c sz= 4144 freeable "Alloc describe " ds=010585EC
EXTENT 2 addr=01189D14
Chunk 1189d1c sz= 4144 freeable "Alloc describe " ds=010585EC
EXTENT 3 addr=010586B4
Chunk 10586bc sz= 4144 freeable "Alloc describe " ds=010585EC
EXTENT 4 addr=0118B5D0
Chunk 118b5d8 sz= 28932 freeable "Alloc describe " ds=010585EC
EXTENT 5 addr=010576E0
Chunk 10576e8 sz= 3584 freeable "Alloc describe " ds=010585EC
Chunk 10584e8 sz= 424 freeable assoc with mark prv=00000000 nxt=00000
000
Chunk 1058690 sz= 24 free " "
EXTENT 6 addr=010596F8
Chunk 1059700 sz= 4124 recreate "Alloc describe " latch=00000000
ds 10585ec sz= 53216 ct= 7
11937c0 sz= 4144
119272c sz= 4144
1189d1c sz= 4144
10586bc sz= 4144
10576e8 sz= 3584
118b5d8 sz= 28932
EXTENT 7 addr=0105A728
Chunk 105a730 sz= 4144 freeable "Alloc authenti " ds=01051E20
EXTENT 8 addr=0105B76C
Chunk 105b774 sz= 4144 freeable "Alloc authenti " ds=01051E20
EXTENT 9 addr=0105668C
Chunk 1056694 sz= 2676 recreate "Alloc server h " latch=00000000
ds 1056594 sz= 2676 ct= 1
Chunk 1057108 sz= 1448 freeable assoc with mark prv=00000000 nxt=00000
000
EXTENT 10 addr=01052AF8
Chunk 1052b00 sz= 15160 freeable assoc with mark prv=00000000 nxt=00000
000
EXTENT 11 addr=01051AB4
Chunk 1051abc sz= 24 perm "perm " alo=24
Chunk 1051ad4 sz= 264 recreate "Alloc authenti " latch=00000000
ds 1051e20 sz= 8552 ct= 3
105a730 sz= 4144
105b774 sz= 4144
Chunk 1051bdc sz= 744 freeable assoc with mark prv=00000000 nxt=00000
000
Chunk 1051ec4 sz= 180 freeable assoc with mark prv=00000000 nxt=00000
000
Chunk 1051f78 sz= 1448 freeable assoc with mark prv=00000000 nxt=00000
000
Chunk 1052520 sz= 1448 freeable assoc with mark prv=00000000 nxt=00000
000
Total heap size = 85344
FREE LISTS:
Bucket 0 size=144
Chunk 1058690 sz= 24 free " "
Bucket 1 size=272
Bucket 2 size=528
Bucket 3 size=1040
Bucket 4 size=2064
Bucket 5 size=4112
Bucket 6 size=16400
Bucket 7 size=32784
Total free space = 24
UNPINNED RECREATABLE CHUNKS (lru first):
PERMANENT CHUNKS:
Chunk 1051abc sz= 24 perm "perm " alo=24
Permanent space = 24
Hla: 255
Process after data load is in progress..

Hi,
Check the below link:
http://www.tek-tips.com/viewthread.cfm?qid=938138&page=6
Best regards,
Rafi.
http://rafioracledba.blogspot.com/

How to fix this error? The startup disk cannot be partitioned or restored to a single partition.

Hey guys,
I am trying to install windows 7 ultimate 64 bit via bootcamp assistant. I open bootcamp assistant from utilities and i get the second window and try to click continue and i get a pop up, saying "The startup disk must be formatted as a single Mac OS Extneded (journaled) volume or already partitioned by Boot Camp Assistant for installing Windows." I looked around on the internet, i found that my internal HD must be set to OS Extended (Journaled). I went into disk utility and i clicked partition tab and the option was set to OS extended (journaled). Any ideas on how to overcome this error so i can install windows 7?

Error is:
1: common
2: misleading and poorly worded
3: space must be:
A: contiguous, that means unfragmented and in ONE section, not multiple
B: files cannot be loced, anchored or in such a manner as to prevent or block partition operation
C: to move, unlock and shuffle files requires booting from another drive or device
Shrink the HFS+ volume by as much or more than you need to set aside to use
If that does not,
Try iDefrag from another hard drive or by burning and using its own CD that is just for consolidating free space
Clone your system (should have backups already, clone is just bootable)
Erase and restore from clone - SuperDuper does consolidate files and free space and result in unfragmented (99% success rate)
None of which has to do iwth what that error message says. This error has been almost a daily threat topic - has gotten less but has not "gone away."

How to solve this error using OSX Server's bots

Plz help me.
My remote repository is SVN version controll system.
when I started integration using bot in OSX Server. this error was pisplayed on a log.
how to solve this error to integrate my project using OSX Server.
Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:466 77537310 +61ms] Will NOT send email notifications because notifyCommitterOnFailure is NO Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:470 77537310 +0ms] Posting email notification for bot run with type com.apple.notifications.BotFailed Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:471 77537310 +0ms] Sending email to committers = (null) Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:1033 77537310 +0ms] Posting notification of type com.apple.notifications.BotFailed Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:199 77537310 +0ms] Posting notification for bot run GUID f87f0098-f8ca-4bfa-945e-cbb11a2f6abb of type com.apple.notifications.BotFailed Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{AuthService.enterMagicalAuthRealm()} Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +45ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCBotService.postNotificationForBotGUID:andRunGUID:andNotificati onType:additionalEmails:(c6189ca0-0649-0649-c01e-81c4d0b52dd9,f87f0098-f8ca-4bfa -945e-cbb11a2f6abb,com.apple.notifications.BotFailed,( ))} Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:601 77537310 +84ms] Deleting work queue item: cf7fe6b8-4df8-b723-4794-50fbf27955ed Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCWorkQueueService.deleteWorkQueueItemWithGUID:(cf7fe6b8-4df8-b7 23-4794-50fbf27955ed)} Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildBundle.m:929 77537310 +13ms] Marking build bundle complete with status failed and sub-status internal-checkout-error Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{AuthService.enterMagicalAuthRealm()} Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:97 77537310 +55ms] Updating bot run with GUID f87f0098-f8ca-4bfa-945e-cbb11a2f6abb Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:102 77537310 +0ms] Updating bot run (f87f0098-f8ca-4bfa-945e-cbb11a2f6abb): { guid = "f87f0098-f8ca-4bfa-945e-cbb11a2f6abb"; status = failed; subStatus = "internal-checkout-error"; } Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCBotService.updateBotRun:({ guid = "f87f0098-f8ca-4bfa-945e-cbb11a2f6abb"; status = failed; subStatus = "internal-checkout-error"; })} Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:108 77537310 +121ms] Updating bot with GUID c6189ca0-0649-0649-c01e-81c4d0b52dd9 Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:117 77537310 +0ms] Updating bot with latest bot run GUID key Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Debug>: [XCSBuildHelper.m:124 77537310 +0ms] Updating bot (c6189ca0-0649-0649-c01e-81c4d0b52dd9): { guid = "c6189ca0-0649-0649-c01e-81c4d0b52dd9"; latestFailedBotRunGUID = "f87f0098-f8ca-4bfa-945e-cbb11a2f6abb"; latestRunStatus = failed; latestRunSubStatus = "internal-checkout-error"; } Apr 3 16:56:42 server.mbkwon.com xcsbuildd[20259] <Info>: [CSRemoteServiceClient.m:151 77537310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCBotService.updateBot:({ guid = "c6189ca0-0649-0649-c01e-81c4d0b52dd9"; latestFailedBotRunGUID = "f87f0098-f8ca-4bfa-945e-cbb11a2f6abb"; latestRunStatus = failed; latestRunSubStatus = "internal-checkout-error"; })}

Hello,
You need to make sure both names match exactly

ORA-00600 how to resolve this error?

I was working on my Oracle 9i database and 6i form server. windows 2003
my server suddenly restarted and after that oracle showing the error ORA-01033: ORACLE initialization or shutdown in progress...
I try to resolve this error through this method. I received above mentioned error. please help how to resolve this error. ORA-00600.
C:\>sqlplus
SQL*Plus: Release 9.2.0.1.0 -
Copyright (c) 1982, 2005, Oracle Corporation. All rights reserved.
Enter user-name: sys as sysdba
Enter password :[password]
Shutdown Database
SQL> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
Startup Database (force)
SQL> startup force;
ORACLE instance started.
Total System Global Area 135338868 bytes
Fixed Size 453492 bytes
Variable Size 109051904 bytes
Database Buffers 25165824 bytes
Redo Buffers 667648 bytes
Database mounted.
ORA-00600: internal error code, arguments: [kcratr1_lostwrt],[],[],[]..................

There was an instance failure.
Then you did a clean shutdown using shutdown immediate
After that, was there any need for giving startup force.
Because that command starts up the database and shuts it down in abort mode, and then starts the database with an instance
recovery.
You should have tried a direct startup also before trying to attempt forceful startup.
*Startup force needs to be used with care.
For carrying out normal startup, simply typing startup will do.
Startup force is being used, when you want to refresh the already running database and facing issues like database showing errors while shutting down before starting up again.
Startup force actually, crashes the instance (just like shutdown abort) and then start your database normally. This do require instance level recovery.*
ORA-00600 are thrown when some internal errors happen. Ideally you should contact Oracle for metalink. For a first level step of troubleshooting, you can search in metalink
like what others said here.

Java.lang.illegalaaccesserror : How to resolve this error?

Hi All,
Following is the stack trace i'm getting when I'm running the application.
<i>java.lang.IllegalAccessError: tried to access method com.bp.ngl.cust.bwmodel.BWModel.wdGetStaticMetadataCache()Lcom/sap/tc/webdynpro/modelimpl/dynamicrfc/DynamicRFCModel$MetadataCache; from class com.bp.ngl.cust.bwmodel.Zy_Search_Supp_Reports_Bw_Input
</i>
Well can someone tell me how is that this error is getting generated? What it means by accessing method ?
Well Here i'm using the mentioned BAPI and for that i've created input of type.
Zy_Search_Supp_Reports_Bw_Input input = new Zy_Search_Supp_Reports_Bw_Input ();
And stack trace indicates this line also.
Can somebody help me with this?
Thanks in advance
Srikant

Hi Patrick
The interface is not changed and also the note no. as suggested by the Nagarajan is also not helpful. I would like to know what kind of illegal access i'm trying to do as nothing it is specifying in the Stack trace.
Following is the stack trace:
<i>
java.lang.IllegalAccessError: tried to access method com.bp.ngl.cust.bwmodel.BWModel.wdGetStaticMetadataCache()Lcom/sap/tc/webdynpro/modelimpl/dynamicrfc/DynamicRFCModel$MetadataCache; from class com.bp.ngl.cust.bwmodel.Zy_Search_Supp_Reports_Bw_Input
    at com.bp.ngl.cust.bwmodel.Zy_Search_Supp_Reports_Bw_Input.<init>(Zy_Search_Supp_Reports_Bw_Input.java:51)
    at com.bp.ngl.custsupp.FindReportComp.<init>(FindReportComp.java:433)
    at com.bp.ngl.custsupp.wdp.InternalFindReportComp.<init>(InternalFindReportComp.java:447)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
</i>
Thanks
Srikant

My friend uses firefox to email me. When I open email it seem to me that firefox blocks my Gmail. So I cannot access my gmail inbox any more. Please show me how to debug this.

My browser is IE9. While I read my friend mails that are sent through Firefox. Suddenly I received an error message "Bad request error 400". Now I cannot access my gmail inbox anymore. I don't know what to do now. Please show me how to debug this so I can go back to my gmail because there are a ton of email in gmail inbox. Please help!!

The following relates to inbox problems in GMail in Nov 2011, no error 400 was seen, only a blank area where the message should have been. Since two people tied into this message this week I think theirs may be a need to update Adblock Plus filters per question [https://support.mozilla.com/questions/896267 896267]

How to solve this error JBoss Server start time............

How to solve this error JBoss Server start time............
10:45:38,484 INFO [TomcatDeployer] deploy, ctxPath=/JobWorkInvoice, warUrl=.../deploy/JobWorkInvoice.war/
10:45:38,640 ERROR [STDERR] log4j:ERROR A "org.jboss.logging.util.OnlyOnceErrorHandler" object is not assignable to a "org.apache.log4j.spi.ErrorHandler" variable.
10:45:38,640 ERROR [STDERR] log4j:ERROR The class "org.apache.log4j.spi.ErrorHandler" was loaded by
10:45:38,640 ERROR [STDERR] log4j:ERROR [WebappClassLoader
delegate: false
repositories:
/WEB-INF/classes/
----------> Parent Classloader:
java.net.FactoryURLClassLoader@d5f9b9
] whereas object of type
10:45:38,640 ERROR [STDERR] log4j:ERROR "org.jboss.logging.util.OnlyOnceErrorHandler" was loaded by [org.jboss.system.server.NoAnnotationURLClassLoader@5d173].
10:45:38,687 ERROR [STDERR] log4j:ERROR Could not create an Appender. Reported error follows.
10:45:38,687 ERROR [STDERR] java.lang.ClassCastException: org.jboss.logging.appender.DailyRollingFileAppender
10:45:38,687 ERROR [STDERR]      at org.apache.log4j.xml.DOMConfigurator.parseAppender(DOMConfigurator.java:174)
10:45:38,687 ERROR [STDERR]      at org.apache.log4j.xml.DOMConfigurator.findAppenderByName(DOMConfigurator.java:149)
10:45:38,687 ERROR [STDERR]      at org.apache.log4j.xml.DOMConfigurator.findAppenderByReference(DOMConfigurator.java:162)
10:45:38,687 ERROR [STDERR]      at org.apache.log4j.xml.DOMConfigurator.parseChildrenOfLoggerElement(DOMConfigurator.java:424)

The error message suggests that your system is running out of memory. How much memory is available for OC4J on this box?
You may also see problems like these when any of the following Jar files in your classpath :
<li>$OH/jlib/repository.jar
<li>$OH/j2ee/home/jazn.jar
<li>$OH/j2ee/home/oc4j.jar
<li>$OH/j2ee/home/jazncore.jar
<li>$OH/jlib/infratool.jar
Thanks,
EJ

Lightroom crashes at start up with the error message "Lightroom encountered an error when reading from its preview cache and needs to quit". Please advise on how to fix this error. Thanks

Lightroom crashes at start up with the error message "Lightroom encountered an error when reading from its preview cache and needs to quit". Please advise on how to fix this error. Thanks

You probably need to delete your preview cache. See here
Why And How To Clear Your Lightroom Cache - Lightroom Fanatic
Preference and other file locations in Lightroom 5

How to fix this error message The backup disk image "/Volumes/AirPort Disk/FARES DEL VALLE's iMac.sparsebundle" could not be accessed (error -1).

how to fix this error message The backup disk image “/Volumes/AirPort Disk/FARES DEL VALLE’s iMac.sparsebundle” could not be accessed (error -1).

The troubleshooting C17 is the specific article.
http://pondini.org/TM/Troubleshooting.html
This is generally a Lion error.. and you will need 5.6 utility to get access to the disk area.
So download the real utility. Run it instead of v6 toy version.
http://support.apple.com/kb/DL1482
Go to the manual setup, disk page and click on disconnect all users.. that will unmount all users connected to the disk and allow it to start working. But there are a number of other issues that are possible cause. Pondini lists some of them.

How to debug this error? trying to load excel file to Database

Similar Messages

Maybe you are looking for