How to delete the data inside a internal table?

I got a internal table name g_itab1.
currently my g_itab1 has a FNAME(50) component.
Inside my component there is ADMINO, EYEAR, FIRSTNAME, LASTNAME and CONTACT.
I want to clear away ADMINO, EYEAR, FIRSTNAME, LASTNAME and CONTACT inside my internal table.
How do i clear it? i have tried using CLEAR g_itab1.
It doesn't work.. the data are still inside.

hi
DELETE TABLE itab WITH TABLE KEY k1 = v1 ... kn = vn.
Example to delete all of the lines between 5 and 36 in a table of names where the entry begins with one of the letters 'A' to 'C'.
DELETE itab FROM 5 TO 36 WHERE NAME CA 'ABC'.
reward if useful
regards
sree

Similar Messages

How to read the data from an internal table,when column names are known

Hi All
I have a specific requirement. I got an internal table with many fields (let it be my_tab). Some of the fieldnames (column names in internal table my_tab) are stored in separate internal table(let it be my_fields).
I need to store/read data corresponding to the fields (whose name is stored in my_fields) from my_tab.
I am able to build dynamic table (referred by field-symbol) with respect to the given field names in my_fields.
But i am unable to read the data corresponding to the fieldnames from my_tab.
Please provide me some pointer in this regard.
Regards
Swetabh Shukla

HI All
Thanks for the prompt response. I got solution for my question. Please check below thread. For quick reponse i posted my question in one more category. Thanks to all of you.
How to read internal table w.r.t. fieldnames stored in other table

How to get the data in one internal table? with 3 different tables..

Hi,
i need to get the all the ff data to put in an internal table. I'm using these data to my ALV. Thanks
   vkorg TYPE a005-vkorg,
   vtweg TYPE a005-vtweg,
   kschl TYPE a005-kschl,
   kondm TYPE mvke-kondm,
   matnr TYPE a005-matnr,
   kdgrp TYPE knvv-kdgrp,
   konda TYPE knvv-konda,
   kunnr TYPE a005-kunnr,
   datab TYPE a005-datab,

hi,
try this
*& Report ZPROGRAM
REPORT ZPROGRAM.
table declaration.
tables : zemployee, zdepartment,zproject.
*type-pools declaration
type-pools : slis , icon.
type specification
types : begin of ty_emp,
        empid type zempid,
        empname type zempname,
        empaddress type zempaddress,
        city type zcity,
        ponumber type zponumber,
        detid type zdeptid,
        end of ty_emp.
types : begin of ty_dept,
        detid type zdeptid,
        deptname type zdeptname,
        designation type zdesignation,
        projectid type zprojectid,
        end of ty_dept.
types : begin of ty_project,
        projectid type zprojectid,
        technology type ztechnology,
        clientname type zclientname,
        end of ty_project.
types : begin of ty_final,
        empid type zempid,
        empname type zempname,
        empaddress type zempaddress,
        city type zcity,
        ponumber type zponumber,
        detid type zdeptid,
        deptname type zdeptname,
        designation type zdesignation,
        projectid type zprojectid,
        technology type ztechnology,
        clientname type zclientname,
       average type p decimals 2,
        end of ty_final.
table type specification.
types : tt_emp type standard table of ty_emp,
        tt_dept type standard table of ty_dept,
        tt_project type standard table of ty_project,
        tt_final type standard table of ty_final.
work area creation.
data : wa_emp type ty_emp,
       wa_dept type ty_dept,
       wa_project type ty_project,
       wa_final type ty_final.
internal table declaration
data : itab_emp type tt_emp,
        itab_dept type tt_dept,
        itab_project type tt_project,
        itab_final type tt_final.
layout declaration
data : gd_layout type slis_layout_alv.
assigning current program name.
data : gd_repid like sy-repid.
         gd_repid = sy-repid.
fieldcatalog declaration.
data : d_fieldcat type slis_t_fieldcat_alv,
         d_fieldcat_wa type slis_fieldcat_alv.
header declaration.
data : t_header type slis_t_listheader,
         wa_header type slis_listheader,
         linecount(10) type c,
         line(10) type c.
selection-screen.
selection-screen : begin of block blk1 with frame title text-001.
select-options : s_empid for zemployee-empid.
parameters : p_dname like zdepartment-deptname.
parameters : p_proid like zproject-projectid.
selection-screen : begin of line.
parameters : p_rad1 radiobutton group r1.
selection-screen comment 3(10) text-002.
parameters : p_rad2 radiobutton group r1.
selection-screen comment 16(10) text-003.
selection-screen : end of line.
parameters : chk1 as checkbox.
selection-screen : end of block blk1.
end of selection screen.
start of selection.
select empid empname empaddress city ponumber detid from zemployee into corresponding fields of table itab_emp where empid in s_empid.
if not itab_emp is initial.
select detid deptname designation projectid from zdepartment into corresponding fields of table itab_dept for all entries in itab_emp where detid = itab_emp-detid .
if not itab_dept is initial.
select projectid technology clientname from zproject into corresponding fields of table itab_project for all entries in itab_dept where projectid = itab_dept-projectid.
endif.
endif.
*end of selection.
populating data into itab_final from itab_emp.
loop at itab_emp into wa_emp.
wa_final-empid = wa_emp-empid.
wa_final-empname = wa_emp-empname.
wa_final-empaddress = wa_emp-empaddress.
wa_final-ponumber = wa_emp-ponumber.
wa_final-city = wa_emp-city.
wa_final-detid = wa_emp-detid.
append wa_final to itab_final.
clear wa_final.
endloop.
*populating data into itab_final from itab_dept and itab_project
loop at itab_final into wa_final.
read table itab_dept into wa_dept with key detid = wa_final-detid.
if sy-subrc = 0.
wa_final-deptname = wa_dept-deptname.
wa_final-designation = wa_dept-designation.
wa_final-projectid = wa_dept-projectid.
modify itab_final from wa_final transporting deptname designation projectid .
endif.
read table itab_project into wa_project with key projectid = wa_final-projectid.
if sy-subrc = 0.
wa_final-technology = wa_project-technology.
wa_final-clientname = wa_project-clientname.
modify itab_final from wa_final transporting technology clientname.
endif.
endloop.
if p_rad1 = 'X' or chk1 = 'X'.
d_fieldcat_wa-fieldname = 'EMPID'.
d_fieldcat_wa-seltext_l = 'Employee Id'.
d_fieldcat_wa-emphasize = 'X'.
d_fieldcat_wa-col_pos = 1.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'EMPNAME'.
d_fieldcat_wa-seltext_l = 'Employee Name'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 2.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'EMPADDRESS'.
d_fieldcat_wa-seltext_l = 'Employee Address'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 3.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'CITY'.
d_fieldcat_wa-seltext_l = 'City'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 4.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'PONUMBER'.
d_fieldcat_wa-seltext_l = 'Postal Number'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 5.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'DETID'.
d_fieldcat_wa-seltext_l = 'Department Id'.
d_fieldcat_wa-emphasize = 'X'.
d_fieldcat_wa-col_pos = 6.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'DEPTNAME'.
d_fieldcat_wa-seltext_l = 'Department Name'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 7.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'DESIGNATION'.
d_fieldcat_wa-seltext_l = 'Designation'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 8.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'PROJECTID'.
d_fieldcat_wa-seltext_l = 'Project Id'.
d_fieldcat_wa-emphasize = 'X'.
d_fieldcat_wa-col_pos = 9.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'TECHNOLOGY'.
d_fieldcat_wa-seltext_l = 'technology'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 10.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'CLIENTNAME'.
d_fieldcat_wa-seltext_l = 'Client Name'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 11.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
endif.
if p_rad2 = 'X' or chk1 = 'X'.
refresh itab_emp.
d_fieldcat_wa-fieldname = 'DETID'.
d_fieldcat_wa-seltext_l = 'Department Id'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 6.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'DEPTNAME'.
d_fieldcat_wa-seltext_l = 'Department Name'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 7.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'DESIGNATION'.
d_fieldcat_wa-seltext_l = 'Designation'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 8.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'PROJECTID'.
d_fieldcat_wa-seltext_l = 'Project Id'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 9.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'TECHNOLOGY'.
d_fieldcat_wa-seltext_l = 'technology'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 10.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
d_fieldcat_wa-fieldname = 'CLIENTNAME'.
d_fieldcat_wa-seltext_l = 'Client Name'.
d_fieldcat_wa-emphasize = 'C710'.
d_fieldcat_wa-col_pos = 11.
append d_fieldcat_wa to d_fieldcat.
clear d_fieldcat_wa.
endif.
Grid display function module
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_INTERFACE_CHECK                 = ' '
   I_BYPASSING_BUFFER                = ' '
   I_BUFFER_ACTIVE                   = ' '
    I_CALLBACK_PROGRAM                = gd_repid
    I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
   I_CALLBACK_USER_COMMAND           = ' '
    I_CALLBACK_TOP_OF_PAGE            = 'TOP_OF_PAGE '
   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
   I_CALLBACK_HTML_END_OF_LIST       = ' '
   I_STRUCTURE_NAME                  =
   I_BACKGROUND_ID                   = ' '
    I_GRID_TITLE                      = 'EMPLOYEE DETAILS'
   I_GRID_SETTINGS                   =
    IS_LAYOUT                         = gd_layout
    IT_FIELDCAT                       = d_fieldcat
   IT_EXCLUDING                      =
   IT_SPECIAL_GROUPS                 =
   IT_SORT                           =
   IT_FILTER                         =
   IS_SEL_HIDE                       =
   I_DEFAULT                         = 'X'
   I_SAVE                            = ' '
   IS_VARIANT                        =
   IT_EVENTS                         =
   IT_EVENT_EXIT                     =
   IS_PRINT                          =
   IS_REPREP_ID                      =
   I_SCREEN_START_COLUMN             = 0
   I_SCREEN_START_LINE               = 0
   I_SCREEN_END_COLUMN               = 0
   I_SCREEN_END_LINE                 = 0
   I_HTML_HEIGHT_TOP                 = 0
   I_HTML_HEIGHT_END                 = 0
   IT_ALV_GRAPHICS                   =
   IT_HYPERLINK                      =
   IT_ADD_FIELDCAT                   =
   IT_EXCEPT_QINFO                   =
   IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
   E_EXIT_CAUSED_BY_CALLER           =
   ES_EXIT_CAUSED_BY_USER            =
   TABLES
     T_OUTTAB                          = itab_final
EXCEPTIONS
    PROGRAM_ERROR                     = 1
    OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
set pf_status for creating client specified icons.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'NEWSTATUS'.
endform.
populating data into header using top_of_page
form top_of_page.
wa_header-typ = 'H'.
wa_header-info = 'ALV REPORT'.
append wa_header to t_header.
clear wa_header.
wa_header-typ = 'S'.
wa_header-key = 'Date :'.
Concatenate sy-datum+6(2) '.'
             sy-datum+4(2) '.'
             sy-datum(4) into wa_header-info.
append wa_header to t_header.
clear wa_header.
wa_header-typ = 'S'.
wa_header-key = 'Time :'.
Concatenate sy-Uzeit(2) '.'
             sy-datum+2(2) '.'
             sy-datum+4(2) into wa_header-info.
append wa_header to t_header.
clear wa_header.
describe table itab_final lines line.
wa_header-typ = 'A'.
linecount = line.
Concatenate 'Total number of records :' linecount into wa_header-info separated by space.
append wa_header to t_header.
clear wa_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = t_header
     I_LOGO                   = 'VMCADMIN'
    I_END_OF_LIST_GRID       =
    I_ALV_FORM               =
endform.
*designing layout.
form gd_layout.
gd_layout-zebra = 'X'.
gd_layout-edit = 'X'.
gd_layout-no_hotspot = ''.
gd_layout-no_colhead = ''.
gd_layout-colwidth_optimize = 'X'.
endform.
Reward with points if helpful.

How to delete the data from partition table

Hi all,
Am very new to partition concepts in oracle..
here my question is how to delete the data from partition table.
is the below query will work ?
delete from table1 partition (P_2008_1212)
we have define range partition ...
or help me how to delete the data from partition table.
Thanks
Sree

874823 wrote:
delete from table1 partition (P_2008_1212)This approach is wrong - as Andre pointed, this is not how partition tables should be used.
Oracle supports different structures for data and indexes. A table can be a hash table or index organised table. It can have B+tree index. It can have bitmap indexes. It can be partitioned. Etc.
How the table implements its structure is a physical design consideration.
Application code should only deal with the logical data structure. How that data structure is physically implemented has no bearing on application. Does your application need to know what the indexes are and the names of the indexes,in order to use a table? Obviously not. So why then does your application need to know that the table is partitioned?
When your application code starts referring directly to physical partitions, it needs to know HOW the table is partitioned. It needs to know WHAT partitions to use. It needs to know the names of the partitions. Etc.
And why? All this means is increased complexity in application code as this code now needs to know and understand the physical data structure. This app code is now more complex, has more moving parts, will have more bugs, and will be more complex to maintain.
Oracle can take an app SQL and it can determine (based on the predicates of the SQL), which partitions to use and not use for executing that SQL. All done totally transparently. The app does not need to know that the table is even partitioned.
This is a crucial concept to understand and get right.

How can we delete the data in e-fact table.

how can we delete the data in e-fact table.

hii,
You cannot delete the request individually but you can one of the following:
1. Do a selective deletion from the cube. RSA1 -> Cube -> Contents -> selective deletion.
2. Delete all the data in the cube and then reconstruct only the required request ids. This would work only if you have the PSA available for all the requests.
3. Reverse posting is another possibility.
hope it helps,
partha

How to fill the data of two different tables into one?

Hi Experts,
I have two tables named CDHDR and CDSHW(structure). I have extracted the data from these two tables through two function modules named CHANGEDDOCUMENT_HEADER and CHANGEDOCUMENT_POSITION. Now I have the data in to different tables.
These two tables neither has relationship with each other through any field nor have any field which exist in both. Can anyone tell me in this case what should be the process to take the data of both the tables into one table. How can I match the record of one table to another?
thanks a ton in advance.
Edited by: Moni Bindal on Apr 28, 2008 4:16 PM
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 1:42 PM

Hye Bindal,
without a relation, it is not possible to club the data of 2 internal tables. More over it depends on the requirement as to y u should club to non related quantities in an internal table.
if you wish to do so, one thing is it has internal table which includes the strucute of the 2.
data: begin of ty_out,
          first type first_structure,
          second type second_structure,
         end of ty_out.
data: itab type standard table of ty_out.
data: wa type ty_out.
loop into it1 into wa1.
move corresponding wa to wa1.
append wa to itab.
endloop.
loop into it2 into wa2.
move corresponding wa to wa2.
append wa to itab.
endloop.
now the internal table itab will have all the contents of it1 and it2.
<REMOVED BY MODERATOR>
Thanks,
Imran.
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 1:43 PM

How to check the data of an archived table.

I have archived a table created by me. I have executed the write program for the archiving object in SARA. Now how can check the data of my archived table.

Hello Vinod,
One thing to check in the customizing settings is your "Place File in Storage System" option. If you have selected the option to Store before deleting, the archive file will not be available for selection within the delete job until the store job has completed successfully.
As for where your archive file will be stored - there are a number of things to check. The archive write job will place the archive file in whatever filesystem you have set up within the /nFILE transaction. There is a logical file path (for example ARCHIVE_GLOBAL_PATH)where you "assign" the physical path (for example UNIX: /sapmnt/<SYSID>/archivefiles). The logical path is associated with a logical file name (for example ARCHIVE_DATA_FILE_WITH_ARCHIVE_LINK). This is the file name that is used within the customizing settings of the archive object.
Then, the file will be stored using the content repository you defined within the customizing settings as well. Depending on what you are using to store your files (IXOS, IBM Commonstore, SAP Content Server, that is where the file will be stored.
Hope this helps.
Regards,
Karin Tillotson

How to recover the data from a dropped table in production/archive mode

How to recover the data/change on a table that was dropped by accident.
The database is on archive mode.

Oracle Version. ? If 10g.
Try this Way
SQL> create table taj as select * from all_objects where rownum <= 100;
Table created.
SQL> drop table taj ;
Table dropped.
SQL> show recyclebin
ORIGINAL NAME    RECYCLEBIN NAME                OBJECT TYPE DROP TIME
TAJ              BIN$b3MmS7kYS9ClMvKm0bu8Vw==$0 TABLE        2006-09-10:16:02:58
SQL> flashback table taj to before drop;
Flashback complete.
SQL> show recyclebin;
SQL> desc taj;
Name                                      Null?    Type
OWNER                                              VARCHAR2(30)
OBJECT_NAME                                        VARCHAR2(30)
SUBOBJECT_NAME                                     VARCHAR2(30)
OBJECT_ID                                          NUMBER
DATA_OBJECT_ID                                     NUMBER
OBJECT_TYPE                                        VARCHAR2(19)
CREATED                                            DATE
LAST_DDL_TIME                                      DATE
TIMESTAMP                                          VARCHAR2(19)
STATUS                                             VARCHAR2(7)
TEMPORARY                                          VARCHAR2(1)
GENERATED                                          VARCHAR2(1)
SECONDARY                                          VARCHAR2(1)
SQL>M.S.Taj

Can we get the data from two internal tables in ALV.

hi friends i would like to display the data using two internal tables using alv grid.please guide me.

Hi,
ALV would be having a specific layout say :
MATNR
MAKTX
QTY
Now, if you have two internal tables, then do they have a different structure. If they have different structures, then what kind of ALV layout you expect. The ALV output should be as per the structure of 1st or 2nd internal table.
If both internal table have same layout, then populate the data from 2nd internal table into 1st internal table and pass the 1st internal table ( it will have data of both internal tables) to ALV.
Best regards,
Prashant

Moving the data of five internal tables to one internal tables.

iam having the five internal table. like below
g_t_vbfa
g_t_vbrk
g_t_vbpa
g_t_kna1
g_t_vbak
this are the five internal tables. each tables having the datas . but each table having the number of records is different. one table having 100 records means another table having 50 records.
previously i used index sys-tabix concept it was not working properly...
my output table is g_t_output_header_data ..
i want to move that output table....
please coding wise give some solution...
thanks
santhosh

hi,
chk a sample.
data : begin of itab1 occurs 0. "itab with work area.
key_field1 like ztable1-key_field1,
field1 like ztable1-field1,
field2 like ztable1-field2,
endof itab1.
data : begin of itab2 occurs 0. "itab with work area.
key_field2 like ztable2-key_field2,
field3 like ztable2-field3,
field4 like ztable2-field4,
endof itab2.
data : begin of itab_final occurs 0.
key_field1 like ztable1-key_field1,
field1 like ztable1-field1,
field2 like ztable1-field2,
field3 like ztable2-field3,
field4 like ztable2-field4,
endof itab_final.
put the date final(merged) internal table
1. loop at itab1.
read table itab2 with key keyfield2 = itab1-keyfield1.
if sy-surc = 0.
itab_final-key_field1 = itab1-keyfield1
itab_final-field1 = itab1-field1.
itab_final-field2 = itab1-keyfield2.
itab_final-field3 = itab2-field2.
itab_final-field4 = itab2-keyfield2.
append itab_final.
clear itab_final.
endif.
endloop.
or
LOOP AT ITAB1.
MOVE-CORRESPONDING TO ITAB1 to ITAB_FINAL.
READ TABLE ITAB2 WITH KEY FILED1 = ITAB1-FIELD1.
if sy-subrc = 0.
MOVE-CORRESPONDING TO ITAB2 to ITAB_FINAL.
endif,
READ TABLE ITAB3 WITH KEY FILED1 = ITAB1-FIELD1.
if sy-subrc = 0.
MOVE-CORRESPONDING TO ITAB2 to ITAB_FINAL.
endif,
append itab_final.
clear itab_final.
endloop
rgds
Anver

How to delete the data in a table using function

hi all,
i need to delete the data in a table using four parameters in a function,
the parameters are passed through shell script.
How to write the function
Thanks

>
But the only thing is that such function cannot be used in SQL.
>
Perhaps you weren't including the use of autonomous transactions?
CREATE OR REPLACE FUNCTION remove_emp (employee_id NUMBER) RETURN NUMBER AS
PRAGMA AUTONOMOUS_TRANSACTION;
tot_emps NUMBER;
BEGIN
SELECT COUNT(*) INTO TOT_EMPS FROM EMP3;
DELETE FROM emp3
WHERE empno = employee_id;
COMMIT;
tot_emps := tot_emps - 1;
RETURN TOT_EMPS;
END;
SQL> SELECT REMOVE_EMP(7499) FROM DUAL;
REMOVE_EMP(7499)
              12
SQL> SELECT REMOVE_EMP(7521) FROM DUAL;
REMOVE_EMP(7521)
              11
SQL> SELECT REMOVE_EMP(7566) FROM DUAL;
REMOVE_EMP(7566)
              10
SQL>

How to Delete the Data in Cube and in ODS

Hi ALL,
I have a cube and an ODS both the data targets have data from the year 2002 to 2005.now i want to delete the data from both the data targets with respect to data related to the year 2003 only,how can it be done. Any Help Appreciated with rewarding points.
Regards,
BW Seeker.

Hi
Generally we can delete the data in the request for the data of year 2003 from request tab in manage screen of datatarget. This can be done only when we are sure that that particular request/s belongs to 2003 year data.
This can be better handled with selective deletion of data for year 2003 with some keyfields like 0CALMONTH etc..
This is infact only way when you have already compressed the data in Infocube.
Hope it helps...
Best Regards,
DMK
*Assign points if it helps...

How to delete the date in podcast or blog page?

Hi,
I would like to delete the dates showing on the first page of my podcast and blog pages - how do i do this in iWeb?
Thank you for your help!
Boaz

You don't want to delete that date as it will affect RSS feeds, etc. However you can hide the date. See this topic: How to make the 'date' disappear on the...: Apple Support Communities
OT

How to delete the data in the compressed infocube

hi, bi gurus
we are facing a problem in inventory management the info cube in BW production
normally every time inventory cube gets compressed that means the data will be moving to F fact table to E fact table
now the problem is we are having some bad data for latest five requests in this cube as we all know compressed data
can't be delete by deleting request in the request tab the only way is go for selective deletion but i don't find any selective
option in the cube we are PSA data for that five request which having correctdata please help how to delete the bad data in the
info cube and load the correct data which we are having in PSA
Thanks
Joe

Hi André
Thanks you for ur answer
what i am telling is their is an option for selective deletion for inventory cube
but i don't find any specific option to delete the data that means like calendar day like that
i hope you got my question.
hi Saveen Kumar,
Thank you again
we are using 3.xx flow if we do the request reverse posting for all the 5 requests which has updated incorrect data
next we need to do compression also or not
and how to reload the data from PSA to Infocube becuse if request still avaliable in info cube it will not allow me to do that
can you please tell me detail how to proceed in step by step this is first time i am doing request reverse post and i have to do it production please tell me
Thanks in adavance
Thanks,joe

How to delete the data in P,Q and S table

Hi All,
I want to delete the data in /BIO/PCOSTCENTER, /BIO/QCOSTCENTER AND /BIO/SCOSTCENTER. Since we have transported the costcenter infoobject from 3.0B to BI 7. But the 3.0B doesnot contain the ALPHA conversion. So we need to delete the infoobject and install from BI content.
When I am trying to activate the BI 7 obj, It is giving the error message the above tables are containing the data.
Pls suggest how to delete them and activate the 0COSTCENTER with BI 7 version.
Points will be awarded.
Thanks
Sathiya

Program RSDMD_DEL_BACKGROUND is the appropriate choice to delete master data. You should be able to search OSS notes on te pgm to get a little more info on it.
It insures referential integrity by checking all InfoProviders to make sure a master data value for that InfoObject does not exist in any InfoProviders. This might not be an issue in your case if you are dealing with a newly activated object that you have don't have in any Infoproviders, but is the only the best way to delete master data.

How to delete the data inside a internal table?

Similar Messages

Maybe you are looking for