How to delete the records in BI for deleted reocrds in R/3

Hi ,
We have a scenarion described below...
We have a table in R/3 and updates happen to the table every week with a ZPROGRAM which deletes some of the records and recreates with some logic.
Assuming :
Initially, We did the load to BI and we got 200 records for last week (Initial Load)
After R/3 prgram is ran, it deletes some of the reocrds in those table , say we only have 150.
Now, Can BW somehow know , what are those records and delete those 50 records from the request which has already been loaded ?
FYI, we just have an indicator marked with X on the R/3 table if the program in R/3 has run.
I know, one solution is "selective deletion".
As we have to selectively delete every week, we do not want to take that approach.
Second is "full load" but we do not want to do full load also as the data volume is huge.
We would like to delete those 50 reocrds in BI dynamically with some ABAP code/some logic. Does anyone have any suggestions ???
Regards,
Kumar

Hi Kumar,
I will try to explain it, but at the moment I am unable to take a look at the code.
I have set up a generic function module which will do the trick for more than one specific datasource. This function module is placed in the startroutine and only executed for the first datapackage.
Within the startroutine of the transformation, you have the possibility to use the p_r_request class. This class contains all necessary information about the current DTP load.
I use the get_source and get_target methods to determine the correct database tables dynamically. The t_h_sel (or somthing) contains the current DTP selections. This will include the RequestID and all other selections like fiscal year for example.
Because the write optimized DSO only has a technical key, we can use the RequestID to do the selection on the source table. After that you can compare the source selection with the active table of the second DSO and add all records from the second DSO that are not available in the source selection.
Please note that the key of the second DSO should be the same as the semantic key of the first DSO in order to do the compare.
Best regards and good luck!
Steven Groot

Similar Messages

How to get the record count printed for the report in the Dashboards

Hi,
I would like to get the record count printed at the bottom of every dashboard report like:
< 1 - 25 of 6300 > instead of < 1 - 25 >
Any help is appreciated
Regards
B

I have tried the following formula which identifies the lowest grain but it does not seem to give me correct result.. I am not getting the correct count. I am getting as 3.A work order can be updated only once at one point of time.hence the formula
MAX(RCOUNT(CAST("SR Wo Fact"."Crm Wo Number" AS CHAR) ||CAST("SR Wo Fact"."PSC Timestamp" as char)))
I tried only MAX(RCOUNT(1)), but I was able to get the record count as corect for Administrator but not for other users.
Has anyone come across this scenario.
Thanks Shravan
Edited by: 786443 on Aug 19, 2010 10:22 AM

How to hack the S10-3T bios for deleting hardware whitelist?

I plan to install a 3g+GPS minicard module on my s10-3t, but it seems that the bios has a lock on the allowed hardware to be installed on the machine, called while list. how to remove this restriction?
I plan to add this card:
http://item.taobao.com/auction/item_detail-db2-3a2280f74b702119f80594b7c38412af.htm

Maybe...MC8781 has another hardware ID....
Intel(R) 82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller - 27C4
hardware ID:
PCI \ VEN_8086&DEV_27C4&SUBSYS_27C48086&REV_02
PCI \ VEN_8086&DEV_27C4&SUBSYS_27C48086
PCI \ VEN_8086&DEV_27C4&CC_01080
PCI \ VEN_8086&DEV_27C4&CC_0101
SUBSYS? how to hack the SUBSYS? I want to try
and this picture is my MC8781's all of the hardware ID
Link to picture;
http://im1.shutterfly.com/media/47a0dd10b3127ccef9ebfbf56b3e00000030O00AbN3Lli0aMmYPbz4E/cC/f%3D0/ps...
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

HOW to delete the records in CO1P?

Hi all:
When i close the PO,i find the PO have CO1P records.However ,the PO has been settled. Then how can i delete the records in CO1P for this PO.

Dear,
CO1P:
Normally the Goods Movement errors are updated in Table AFFW - Goods Movements with Errors from Confirmations and in transaction COGI.
If the table is locked during background using update control for the confirmation then the errors are recorded in CO1P.
COFC:
Used for Reprocessing of errors in confirmation related to actual cost calculations.
Please run CORUPROC Program.
Please check this link also for further help
http://help.sap.com/saphelp_46c/helpdata/en/e3/7cd32396f611d1b5a60000e8359890/frameset.htm
Regards,
R.Brahmankar

How to delete the record in Table

Hi Guru's,
i have Table which contain no.of Records.
i want to deleted one record. if i go to Table maint.Generator....from table itself..
how to do that... when we deleting the record. can we create new TR for that?
can anybody tell me.
Thanks in Advance,
venkat

Hi,
it is answered, here for my table there is no Table Maint.Generator.
i just explained how i have done it.
i just simply gone into Debug mode. there
code = Dele.
i have given. then i came out from debug mode to Table. there i just got Delete button on application tool bar.
i selected the record then icliked on Delete button.
it is got deleted.
But it is not asking for any new Transport Request.
Regards,
Venkat

How to delete the records with routine Z_AFRP4_DELETE as note [418584|

Hello Gurus,
I don't want to transfer data into HR and want to delete the records in table AFRP4 to business complete the Maintenance Orders
Component version- EHP7 for SAP ERP 6.0
Component-EA-APPL
Release-617
how can I delete these records
Thanks fro Help
AM

Hello All,
I found the solution, I copied the code in correction instruction number 0000282352 and create the report as programme Z_AFRP4_DELETEand the executed
*$*$----------------------------------------------------------------$*$*
*$ Correction Inst.         0120061532 0000282352                     $*
*$--------------------------------------------------------------------$*
*$ Valid for       :                                                  $*
*$ Software Component   SAP_APPL   SAP Application                    $*
*$ Release 40B          All Support Package Levels                   $*
*$ Release 45B          All Support Package Levels                   $*
*$ Release 46B          All Support Package Levels                   $*
*$ Release 46C          All Support Package Levels                   $*
*$ Release 470          All Support Package Levels                   $*
*$ Release 500          All Support Package Levels                   $*
*$ Release 600          All Support Package Levels                   $*
*$ Release 602          All Support Package Levels                   $*
*$ Release 603          All Support Package Levels                   $*
*$ Release 604          All Support Package Levels                   $*
*$ Release 605          All Support Package Levels                   $*
*$ Release 606          All Support Package Levels                   $*
*$--------------------------------------------------------------------$*
*$ Changes/Objects Not Contained in Standard SAP System               $*
*$*$----------------------------------------------------------------$*$*
*& Object          REPS Z_AFRP4_DELETE
*& Object Header   PROG Z_AFRP4_DELETE
*& REPORT Z_AFRP4_DELETE
REPORT Z_AFRP4_DELETE .
* This report deletes confirmation records from table AFRP4 that are
* not longer needed. Run it without update flag first !!
   tables: afrp4.
   data: lt_afrp4 like afrp4 occurs 0,
         ls_afrp4 like afrp4.
   selection-screen begin of block order with frame.
   select-options: zorders for afrp4-aufnr.   "order number
   selection-screen end   of block order.
   parameters: update as checkbox.
   select * from afrp4 into table lt_afrp4
                where aufnr in zorders.
   if lt_afrp4[] is initial.
     format color col_normal.
     write: 'No HR confirmation background records read.'.
     exit.
   endif.
   format color col_heading.
   write: /5 'Order', 25 'Confirmation', 45 'Counter'.
   skip. uline. skip.
* show corrections
   loop at lt_afrp4 into ls_afrp4.
     format color col_normal.
     write: /5 ls_afrp4-aufnr, 25 ls_afrp4-rueck, 45 ls_afrp4-rmzhl.
   endloop.
* update on data base table
   if not update is initial.
     skip. uline. skip.
     delete afrp4 from table lt_afrp4.
     if sy-subrc is initial.
       format color col_positive.
       write: 'HR-records deleted successfull'.
     else.
       format color col_negative.
       write: 'Error when trying to update data base table AFRP4.'.
     endif.
   endif.

How to delete the record in the file present in the application server?

Hi,
I have two questions.
i) How can I delete a record based on some condition in the recordx in the file that is present in the application server?
ii) How can I lock the users whiel one user is accessing the file on the application server?
Thanks in advance.
Suvan

Hi,
If u want a frequent deletion this approach to delete a record from a file will havee unnecesary copy of records from one file to another and deletion of one file and renaming activities.
Instead what u can do is Add and field del_flag to ur record structure.
If u want to delete the record from a file just mark this del_flag as 'X'.
While processing u can have a loop like
loop at it_XXX where del_flag <> 'X'.
endloop.
This will logically delete the record.
When u r to finish the application at that time only perform this copying / deleting / and renaing activity
Hope this helps.
Cheers,
Nitin

How to refresh after delete the records in ALV report ?

Hi Friends,
How to refresh after delete the records in ALV report.
I am deleting records in ALV report .
After successful delete the screen should refresh.
u201C Deleted records should not appear in the screen u201C.
Please guide me.
Regards,
Subash

Hi subhash,
FORM user_command USING r_ucomm LIKE sy-ucomm      rs_selfield TYPE slis_selfield.
WHEN 'BACK'.
Refresh the internal table from the ALV grid
      PERFORM update_alv_tab.
ENDFORM.                    "user_command
FORM update_alv_tab .
DATA : e_grid TYPE REF TO cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
    IMPORTING
      e_grid = e_grid.
CALL METHOD e_grid->check_changed_data.
"update_alv_tab
CALL METHOD e_grid->refresh_table_display.
ENDFORM.                    " UPDATE_ALV_TAB
Then see in Debug mode is it updating or not..
Please confirm .
And please paste the code if you can.
Regards.

Regarding how to delete the record in internal table

Hi experts ,
how to delete the record in intarnal table after validating the data,
if record contains invalid fields?
i am giving my code see this and give me the answer?
loop at it_data into wa_data .
Validate Cost Center
    READ TABLE it_kostl INTO wa_kostl WITH KEY kostl = wa_data-kostl BINARY SEARCH.
    IF sy-subrc NE 0.
      PERFORM update_error_log USING wa_data
                                     text-004.
    ENDIF.
Validate source file material ( material number )
loop at it_mara into wa_mara .
read table it_ausp into wa_ausp with key atwrt = wa_data-i_matnr .
           if sy-subrc NE 0 .
   PERFORM update_error_log USING wa_data
                                       text-002.
delete it_data-objek .
     else.
read table it_mara into wa_mara with key matnr = wa_ausp-objek .
       if sy-subrc EQ 0 .
       wa_data-objek = wa_mara-matnr.
       wa_data-matkl = wa_mara-matkl.
     ENDIF.
     Modify it_data from wa_data .
endif.
*endloop.
Validate unit of measure (unit)
    READ TABLE it_t006 INTO wa_t006 WITH KEY msehi = wa_data-unit .
    IF sy-subrc NE 0.
      PERFORM update_error_log USING wa_data
                                     text-003.
    endif.
Validate delivery location ( storage location )
    READ TABLE it_lgort INTO wa_lgort WITH KEY del_loc = wa_data-del_loc.
    IF sy-subrc NE 0.
      PERFORM update_error_log USING wa_data
                                     text-001.
         if wa_data-flag ='x' .
      delete it_data from wa_data .
    endif.
    ENDIF.
endloop.

Hi Naren,
First get the index number of the IT_data table and store it in one variable whose declaration like this.
data: tabix type sy-tabix.
while reading the internal table it_data set the tabix variable.
tabix = sy-tabix.
Instead of the above use below one.
Delete it_data-objek
Use the Below statement it will delete the row from the internal table.
Delete it_data-objek index tabix
Thanks,
Chidanand

How to delete the record of saved HRA Details...

Hi Experts,
I have put the details of HRA Correctly.But while updating HRA In 0008 Infotype i wrongly updated the wagetype,How should i change the Wagetype.
When i m trying to delete it is showing RECORD CAN NOT BE DELETED (TIME CONSTRAINT 1).
How can delete the record.
Thanking u .
Sai

Hi
Hope doing well ........ No need to delete any infotype but u can go to PA30 and in change mode their u can delete the wagetype which is wrongly entered
Rajeshk

I forgot my icloud id and password. i want to delete the id. i forgot the password. if i try to delete the account its asking for password. i cannot find how to delete the account. Please anyone can help me out???

I forgot my icloud id and password. i want to delete the id. i forgot the password. if i try to delete the account its asking for password. i cannot find how to delete the account. Please anyone can help me out???

You aren't going to be able to delete it without the correct password. If it's your ID, you can reset the password as explained here: http://support.apple.com/kb/HT5625. If it isn't your ID, you will have to get the password for the person who owns the ID. There's no way around this and no one else can help.

How to proces the record in Table with multiple threads using Pl/Sql & Java

I have a table containing millions of records in it; and numbers of records also keep on increasing because of a high speed process populating this table.
I want to process this table using multiple threads of java. But the condition is that each records should process only once by any of the thread. And after processing I need to delete that record from the table.
Here is what I am thinking. I will put the code to process the records in PL/SQL procedure and call it by multiple threads of Java to make the processing concurrent.
Java Thread.1 }
Java Thread.2 }
.....................} -------------> PL/SQL Procedure to process and delete Records ------> <<<Table >>>
Java Thread.n }
But the problem is how can I restrict a record not to pick by another thread while processing(So it should not processed multiple times) ?
I am very much familiar with PL/SQL code. Only issue I am facing is How to fetch/process/delete the record only once.
I can change the structure of table to add any new column if needed.
Thanks in advance.
Edited by: abhisheak123 on Aug 2, 2009 11:29 PM

Check if you can use the bucket logic in your PLSQL code..
By bucket I mean if you can make multiple buckets of your data to be processed so that each bucket contains the different rows and then call the PLSQL process in parallel.
Lets say there is a column create_date and processed_flag in your table.
Your PLSQL code should take 2 parameters start_date and end_date.
Now if you want to process data say between 01-Jan to 06-Jan, a wrapper program should first create 6 buckets each of one day and then call PLSQL proc in parallel for these 6 different buckets.
Regards
Arun

How to run the Transaction Code - BIC for Bank keys uploading

Hi
How to run the Transaction Code - BIC for Bank keys uploading.
please give me suggestion.
Thanks
Indu

Go to BIC transaction screen
Fill the selection screen parameters as below
1. Update Run (Test Run: Check Off: Real Run:Check On)
2. Set Deletion Flag (Check On)
3. Maximum no. of records: 999999
4. Detail List (Check On)
5. Display variant: 1SAP
6. Presentation server (Select Radio Button)
7. Application server (Deselcet Radio button)
8. File name and Path: Select relavant file which is to be upload
9. Bank country: If needed (Give respective country name)
10. Select execute button or F8
NOTE: Make sure that before executing run execute TEST RUN by deselecting Update Run check box
Hope this will meet your requirement
Thanks.

SAP - Material Master- If a Material Record is marked for deletion

If a Material Record is marked for deletion at client level, would this material be available for MRP runs and Physical inventory purpose.

Hi Hemant
If the material is just marked for deletion, it gives the flexibilty to revert back your decision and have them live. For this reason, the behavouir is controlled by system messages. The system will allow you to post inventory if the system message (M7 127)is configured as Warning under Materials Management --> Inventory Management and Physical Inventory --> Define Attributes of System Messages. The same way we can configure for Purchasing as well.
But from a MRP run prespective, it will terminate as mentioned by Mario.
If you want to get rid of a material from your system, then refer to the below thread
how to delete material
Best Regards
Sathees Gopalan

How to get the records of the particluar day when delta laod failed (Urgent

Hello BW Gurus,
We are facing one serious issue. Here is the scenario.
1st time the Delta was init and for next consective two loads delta ran sucessfully... then next time delta got failed and the status is in red..... even though system started next delta loading and it has fetched the records and status is in green but not activated ,,,,,its happening still past one month so almost there are 20 requests which are to be get activatetd.
How to resolve this issue.
<b>And how to get the records of the partilcular day when the delta got failed.
</b>
Anyone have come across with this strange issue then help me out and i will rewarrd the points.
Urs,
Raki.

Hi
Can you provide more details about your extractor and data targets.
Are you loading delta to an ODS ??
If you are loading to an ODS, The only solution i can see is to get the missing delta records via FULL UPDATE. Because if you delete the error request from ODS it will also delete the 20 successful requests above it.
Cheers
Praveen
null

How to delete the records in BI for deleted reocrds in R/3

Similar Messages

Maybe you are looking for