How to design the scenario? i have process files sequentially with timegap

Hi Folks,
I am really looking for one requirement like, Sender file adapter has to pick multiple files by file name based with some time gap? Can we?normally i am getting 40 files in the source directory with some time gap like 1hr and 2 hours.but my in some situations like system got down and if the server stopped for some refresh work then 2 days files will come to source directory and after system is sap pi try to process files at a time but the source side can,t process more than 4 files at a time
in tht case the messages are not processed they are in schedule mode only.
I have got one BPM in this, I have tried with Process mode : Name and Date, with wait step on BPM, but no use. The way how PI behaving, if 40 files in file directory, it is picking all files in one shot. Start processing but not in order. if it is process also the SNC system can't process 4 at time.it will process files with some time gap.
The problem is on Receiver system side. The receiver system is SNC system, if old data receives later than earlier date data; we get data obsolete application error.
Ex: If I receive 25th and 26th files, first I need to process 25th first on PI sends to SNC, I need to give some time gap and pick another file or even PI picks and process 26th file, no problem but I need to give some time gap to send SNC to this 26th date file?
Please how guys, throw me your great ideas
Thanks in advance!!
Regards
SG

Hi Seshagiri,
first problem is to process the files sequentially by XI- Is it posiible to put a sequence number at end of each file as its last line? This number you can process within XI and hold on messages in a container unless all files with lower sequence number has already been processed thus you can also prevent receiver SNC system to receive files out of order. The sequence number has to be put before posting the file in XI.
regards
Anupam
Edited by: anupamsap on Nov 25, 2010 7:48 AM

Similar Messages

HT204074 how to assess the apps i have on my ipad with my iphone 5s

how to assess the apps i have on my ipad with my iphone 5s

If universal, just re-download them to your phone, or sync them from your iTunes library.

Can we design the scenario with Business service

Hi,
I have IDOCXIFile Scenario
Can we design the scenario with Business service for SAP R/3 and As well as for File system also????
I dont have details abt the SAP R/3 system to create the Tech system in SLD
Regards
Suman

Hello Suman,
Go through this Blog..
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
These are the steps which u have to do
STEPS IN DESIGN
1. Import idoc from the SAP System (SAP02) through imported objects.
2. Create Data Type, Message Type, Message Interface for the Outbound File.
3. Create Message Mapping with file Message and idoc (Matmas04)
5.Create Interface mapping between File Interface and the idoc.
Steps to be followed in Creation of Technical and Business System
Technical System
In SLD, click on technical landscape->New Technical System->WebAS ABAP.
Business System.
1.Goto Business Landscape->New Business System->Name the business system.
2. Choose the technical system that needs to be attached->WebAS ABAP->Technical System Name.
Preconfiguration steps for transfer of data to IDOCS
1.Create a RFC Destination in SM59 of XI Server of type.
2.In transaction IDX1 ,create a port for the client of XI server.
3. The port has to be displayed in the idx2 transaction and we should be able to view the idocs which we imported through integration repository.
Steps in Configuration
1. Goto service without party, right click->Assign a business system.
2. Choose the business system to be added.
3. Create a File Sender Service with communication channel for the same.
4. Create an idoc receiver channel under the business system.
7. The Idoc type( which data is to be written) is mentioned as inbound parameter.
8. Mention the logical Name in the Service->Adapter Specific Parameters of both the File Sender Service as well as the business system.
9. Make the Sender Agreement for theFile Sender with communication channel.
10.Create the Receiver Determination and Interface Determination for the business system.
11.Create the Receiver Agreement for the Business system.
Step for Configuration fo IDOC in R/3
SM59-rfc destination
IDX1-port
IDX2-load metadata
we05-IDoc status records
BD54-Create Partner Number
We20-Create Partner Profile
WE19-Testing IDoc Processing
Do these configurations in R/3 and in XI...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Reward Points if it is useful..
Thanks,
Satya Kumar

How to config the proxy of Bpel process manager(with password)

HI, i met the quetion as below
The The Oracle BPEL Process Designer & Manager server is installed on my computer in domin of my company, so if One of the BPEL processes deployed on the BPEL server needs to access a synchronous Web service hosted outside the firewall .i need to config the proxy, but the proxy of my company needs my ID and password to access outside . after I congfig the proxy
option of designer and build the Process, there will be pop-up a dialog box and ask for my ID & password .But how i config the proxy of Bpel process manager?? I read the tecnote about HTTP Proxy Configuration and config the proxy in the obsetenv.bat ,but it seems has no information about my ID&password in obsetenv.bat.
The question is How can i let the Bpel process manager know my proxy and ID&password ?? pls help me ,thx!

I have set these value in obsetenv.bat as follows, and I restart the Bpel manager server and designer.
but the same issue still occur:
set OB_JAVA_PROPERTIES="-Djavax.wsdl.factory.WSDLFactory=oracle.j2ee.ws.wsdl.factory.WSDLFactoryImpl" "-Dhttp.proxySet=true" "-Dhttp.proxyHost=pxysha" "-Dhttp.proxyPort=8080" "-Dhttp.proxyUser=oocldm\hanfi" "-Dhttp.proxyPassword=123456" "-Dhttp.nonProxyHosts=localhost".
At the same time, I have set proxy server in bpel designer of eclipse, after I build the process,it can works well(which display BUILD SUCCESSFUL), but the bpel server display error message as below :
Exception Name:
Failed to read wsdl
Exception Description:
Error happened when reading wsdl at "C:\orabpel\domains\default\tmp\.bpel_TerraFlow_1.0.jar\TerraServiceRef.wsdl", because "WSDLException: faultCode=PARSER_ERROR: Error reading file: Server returned HTTP response code: 407 for URL: http://terraserver.microsoft.com/TerraService.asmx?WSDL".
what happen ?

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files but still have them on the TC for future reference..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?

It's not a good idea to use a network disk for both Time Machine backups and other things. By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files. I'd store those other files on an external disk connected to the Time Capsule. The problem with that is that Time Machine will only back up files that are local to your Mac. That means that you'll only have one copy of the files on or attached to your Time Capsule.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

How to change the maximum number of process per user in BW ?

Hi,
Do you know how to change the maximum number of process allowed per user ?
With RSRT we can customize the number of process per query but I don't know where we can customize the maximum number of process per user.
In fact, my production environment reach always the max number of process available in SM50...
Thanks a lot

Hi,
A user is not have the No. of processor but a work process can handle N No. of users. If a user hit any transaction v acn say from a list of N worl proceesor which has been taken the work.
Correct if I am wrong.
Regards
Syed.

How to design the report?

Hi,
how to change the filling data in report by vertical way?
for eg: i am creating a group (group by userId) and displaying user name and access rights info;
User Name   Access Rights
TestUser      Adminuser
TempUser    NotanAdminuser
but i want in this format
UserName        TestUser   TempUser
AccessRights Adminuser NotAnAdminuser
how to design the report?

i haven't tried using cross tab.
but my requirement is like...
Modified User Name ........ TestUser     Thendral    till 'n' number of users
Total NO of Patients..........10                    5
          Heart Failure...........5                      1
          Surgical..................1                      2
          Pneumonia             3                      1
          Chest Pain             1                       1
        till 15 rows
How to achieve this using crosstab?

In XI ,file on application sever how to do the scenario like file to idoc?

hi experts,
In XI ,file on application sever how to do the scenario like file to idoc?
thanks in advance
gupt

Hi gupta ,
The following are excellent websites giving step-by-step solution to solve u'r problem:
How to convert an IDoc-XML structure to a flat file and vice-versa in XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
IDoc Packaging and Mapping Techniques
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
check this blog
Idoc File -> SAP R/3 packaging
How ToConfigure IDoc Adapters
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
Troubleshooting File-to-IDOC Scenario in XI.
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
cheers!
gyanaraj
****Pls reward points if u find this helpful

How to avoid the long time consuming process of settlement on periodic basi

For investment Project(purpose of capitalisation) related expenses We would like to show it Directly in Balance Sheet rather than P/L A/C.Whether it is feasible or not?as per one of consultant it will be first hit the p/L and after settlement it will only be shown in B/Sheet.So how to avoid the long time consuming process of settlement on periodic basis.

Hi, could you write down an example? And what you mean by investment project-is this an WBS?

How to design the URL?

How to design the URL?i know that the Google will take down the good URL.such as the staticize URL Google will like more..

A site's URL structure should be as simple as possible. Consider organizing your content so that URLs are constructed logically and in a manner that is most intelligible to humans (when possible, readable words rather than long ID numbers). For example, if you're searching for information about aviation, a URL like http://en.wikipedia.org/wiki/Aviation will help you decide whether to click that link. A URL like http://www.example.com/index.php?id_sezione=360&sid=3a5ebc944f41daa6f849f730f1, is much less appealing to users.
Consider using punctuation in your URLs. The URL http://www.example.com/green-dress.html is much more useful to us than http://www.example.com/greendress.html. Google recommends that you use hyphens (-) instead of underscores (_) in your URLs.
Overly complex URLs, especially those containing multiple parameters, can cause a problems for crawlers by creating unnecessarily high numbers of URLs that point to identical or similar content on your site. As a result, Googlebot may consume much more bandwidth than necessary, or may be unable to completely index all the content on your site.

How to make the vendor column have figure in GRIR line item with RE document type?

Dear Experts,
Could you tell me how to make the vendor column have figure in GRIR line item whose document type is RE?
Thanks!
Xinling Zhang

Hi ,
You are using FAGLL03 .
FAGLL03 report vendor code is blank
vendor number in new FAGLL03 tcode (offsetting account information)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30b96fed-eb5d-2e10-1792-f3ff9f65df8a?QuickLink=index&…
Also check OSS note
Note 112312 - Line item: Display of offsetting a/c information
Note 1034354 - FAGLL03: Display of offsetting account information
Many Thanks

How to determine the if I have iPad 2

How to determine the if I have iPad 2

Put your serial number (Settings > General > About > Serial Number) in on this page and it should tell you

How long is the life time of process scope variable ?

Hi All,
How long is the life time of process scope variable befoer it expires ?
Is it the same with the life time of session scope ?
How can we set the value in OAS when deployment ?
Thank you,
xtanto

Hi,
http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/jsf/doc/devguide/communicatingBetweenPages.html
" Finally, processScope never empties itself; the only way to clear processScope is to manually force it to clear:
AdfFacesContext afContext = AdfFacesContext.getCurrentInstance();
afContext.getProcessScope().clear();
Otherwise the variable lives for the duration of the window process. The referenced document above also shows how to set a variable to process scope
Frank

I'm converting from a PC to iMac. On the PC I have many Inbox folders with PR info for distribution. How do I get these folders from the PC to the iMac?

I'm converting from a PC to iMac. On the PC I have many Inbox folders with PR info for distribution. How do I get these folders from the PC to the iMac? I've used the Windows e mail Inbox folders for an easy access filing cabinet for years, as this all goes out on e mail. Thanks for assisting me!

I think the easiest way would be to use Migration Assistant to get all that over...
http://support.apple.com/kb/HT2518
http://support.apple.com/kb/DL1415

How to trigger the automated row fetch process and open modal window by javascript api?

Hi,
I would like to click the one row of column of IR report, to open the modal window of current page. <----------------it is ok. I can use "javascript:openModal('windowID')" to do it.
There is one form in this modal window, Meanwhile, I would like to pass column data to this form.    <--------------------- it is ok also. I can use " $s('P7_ID','column_value');" to do it.
But I don't know how to trigger the "automated row fetch" process of this form to retrieve other field's value in this form.
I tried to use following 2 ways. But failed.
First method:
add one ajax process of "automated row fetch" in "page processing" block, named "get_fetch_data"
when click IR column , call "openModal", and call "apex.server.process ( "get_fetch_data", {}, { success: function( pData ) { } } );" , I tried to call above ajax process to refresh form. It is failed.
Second method:
add one process of "automated row fetch" in "page rendering" block, named "get_fetch_data"
when click IR column, call javascript api "apex.submit" to submit current page , then call "openModal".
such as : javascript:apex.submit({request:'MODIFY',set:{'P7_ID': #ID#}}); openModal('trade');
But it is failed also. the modal page is showed firstly. then page refresh. but modal window will not open again.
I am not sure if my thinking is right. Could you please provide any suggestion?
Thanks in advance,
Ping

Hi Ping,
You can try to set the session state of your modal page's primary key before opening the modal page. Use one dynamic action (on click of IR row) with two true actions. First one to set session state of modal page pk, second on to open modal page.
Or you can add the modal page url as link in your report by extending your query:
select ...
,         apex_util.prepare_url( 'f?p='||:APP_ID||':7:'||:APP_SESSION||'::'||:DEBUG||':7:P7_ID'||COLUMN_VALUE ) as link
from ...
This will give you the url of the modal page, with set primary key.
Regards,
Vincent Deelen
http://vincentdeelen.blogspot.com

How to design the scenario? i have process files sequentially with timegap

Similar Messages

Maybe you are looking for