How to determine Secure Channel key set index or version within applet

Hi,
Is there any way to determine from within the applet the used key set index or key set version?
The ProviderSecurityDomain object does not contain such a property to my understanding.
b.r.
Fabe

No there is not. There are API's to ask the security domain to do crypto operations using the current secure channel session keys and GP says that the security domain needs to be aware of what keys to use for this.
The key information is not exposed to the applet as it is not generally required and for security reasons.
Cheers,
Shane

Similar Messages

I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost?

I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost? I dont have the previous product key.

virenkhare wrote:
I have upgraded my OX from mountain lion to mavericks . the installer is asking for previous product key. How to know about previous key as the trial version is installed and I have paid for upgrade cost? I dont have the previous product key.
There are no keys, there is no trial version of OSX (ML or Mavericks) and Mavericks is free
What have you downloaded, and where did you get it

How to find the product key on a preinstalled version of Windows 8?

This is a similar qustion:
https://forums.lenovo.com/t5/Windows-8-and-8-1-Knowledge-Base/How-to-find-the-product-key-on-a-prein...
But its not actually explaining which part of the BIOS menu contains the windows key.
I see a UUID number -- but that doesmt match the windows 8 5x5 code format. SO!
where can I locate the windows 8 key in the BIOS?

On recent ThinkPad, the Product ID Key sticker has been moved from the bottom of the unit to behind the battery.
You need to contact Lenovo technical support directly to ask about recovery media.

How to determine the exact key pressed when numlock disabled?

Hi there,
I am trying track the keyboardevent that triggered by pressing numpad keys as hotkey, but when the numlock is disabled, the same keycode, same keylocation was gotten as pressing in the standard keyboard. how can I determine if the numpad was pressed or the other control keys were pressed?
Thank you!
Andy

Hi there,
I am trying track the keyboardevent that triggered by pressing numpad keys as hotkey, but when the numlock is disabled, the same keycode, same keylocation was gotten as pressing in the standard keyboard. how can I determine if the numpad was pressed or the other control keys were pressed?
Thank you!
Andy

How to determine binary file data set size

Hi all
I am writing specific sets of array data to a binary file, appending each time so the file grows by one data set for each write operation. I use the set file position function to make sure that I am at the end of the file each time.
When I read the file, I want to read only the last 25 (or some number) data sets. To do this, I figured on using the set file position function to place the file position to where it was 25 data sets from the end. Easy math, right ? Apparently not.
Well, as I have been collecting file size data as I have started the initial tet run, I am finding the the file size (using file size command and getting number of bytes as a result) that the size is not growing the same amount every time. My size and format of my data being written is identical each time, an array of four double precision numbers.
The increments I get are as follows, after first write - 44 bytes, after 2nd - 52 bytes, 3rd - 52 bytes, 4th 44 bytes, 5th - 52 bytes, 6th - 52 bytes, 7th - 44 bytes and it appears to maintain this pattern going forward.
Why would each write operation not be identical in size of bytes. This means that my basic math for determining the correct file poistion to read only the last 25 data sets will not be simple and if somewhere along the line after I have accumulated hundreds or thousands of data sets, what if the pattern changes.
Any help on why this is occuring or on a method of working around the problem would be much appreciated.
Thanks
Doug
Doug
"My only wish is that I am capable of learning each and every day until my last breath."
Solved!
Go to Solution.

I have stripped out the DSC module functions from the vi and attached it here. I also set default values to all the inputs so it will run with no other inputs. I also included my current data files (zipped as I have four of them) though the file names are hard coded in the vi so they can be changed to whatever works locally. In fact probably will have to be to modified for the path anyway.
If you point to a path that has no file, it will create a new one on the first run and the file size will show zero since there is no data in it. It will start to show the changes on each subsequent run.
As I am creating and appending four different files, each with it's own set of data but always the same format (array of four double precision numbers) and the file size information always increments the same for all four files (as will be seen in the File Size Array) I don't think it is a function of the size of the acutal numbers but something idiosyncracy with how the binary file is created.
If this proves to be a major hurdle I guess I could try a TDM file but I already got everything else working with this one and need to move on to other tasks.
Thanks for any continued assistance
Doug
Doug
"My only wish is that I am capable of learning each and every day until my last breath."
Attachments:
!_Data_Analysis_Simple.vi ‏40 KB
SPC.zip ‏2 KB

How to determine the logical Keys of logical fact table in BMM layer?

Hello guys
I'd like to know more about how to know what columns of the logical fact table should be used as key in BMM layer. How OBIEE behaving differently when different keys are selected?
In my situation, I have 1 fact table that physically joins to 20 dimensions in physical layer. Therefore, in physical layer, this fact table has about 20 foreign keys but no primary keys..
In the logical layer, this fact table is logically joined to the same group of dimension tables. So in this case, how do I know what columns in logical fact table I should use as keys?
Please advice
Thanks

thanks for the reply...
The interesting thing I notice is that, when I start using fragmentation with the fact tables in its LTS, if not primary key is defined in the logical fact table, then I will be getting errors:
[nQSError: 10058] A general error has occurred. [nQSError: 14023] None of the fact sources for columns are compatible with the detail filter []. (HY000)
When I create the key by choosing random columns from the fact table as the logical key columns, this error goes way and the correct SQL is generated according to the frag..
Because of such behavior, I'd really like to know how logical key really works in BMM layer.

How to view once ORACLE_SID is set in Windows version?

Hi
I have just created a Database in Windows XP usinf DBCA. Now, I was trying to logon as SYS. I did set the DB using ORACLE_SID but I don't know if the DB I am pointing is current as when I type 'echo ORACLE_SID' it is giving me 'ORACLE_SID' andnot the DB I want to switch to.
My question is...how to view after setting ORACLE_SID if it is pointing to the correct database we want to switch to?
Remember, I am using Windows XP.
Thanks

Hi,
In simple you can find in many ways.. when you create a DB, if you are using the deault locaitons by ORACLE,
Example this is the path
" F:\oracle\product\10.2.0\oradata\ORCL1 "
After oradata Directory ORACLE Creates the Directory by name "ORCL1"... it's your SID.
Second you can find from your tnsnames.ora life where you service_name is refereed.
Third you can find from your listener too..
fourth.. If windows....
go servicesin windows..
Check "OracleServiceORCL1" in this ORCL1 is the SID of your DB.
IF your double click that you can find the path
f:\oracle\product\10.2.0\db_1\bin\ORACLE.EXE ORCL1
Wher ORCL1 is SID..
stil so many ways are there..
- Pavan Kumar N

HT1918 how do you determine what devices are set up under homesharing

Does anyone know how you determine what devices are set up under homesharing? I am not finding a list of devices under my account.

Welcome to the Apple Community.
There are no lists, you'll need to check each device.

How do I secure erase macbook pro 2012 retina for resale

How do I secure/erase and set to factory settings 15" Macbook Pro 2012 retina) for resale?

Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
Be sure you disable or turn off iCloud. Deauthorize the computer in iTunes. Remove any Firmware Passwords you may have configured. Turn off FileVault if enabled.
What to do with iCloud before selling your computer

How to determine the changes in Acrobat SDK version.

Hi
Please let me know how to determine the changes in an Acrobat SDK version w.r.t. the previous one.

Hi,
The easier way is to read the SDK documentation : What's New for Acrobat SDK.
Regards,
Joe

How to input multi-key into card in JCOP with secure channel ?

When I input multiple keys into JCOP ,it returs 6982. It seems I calculate the wrong C-MAC value. The steps as follows:
//auth mac
--> 80 50 00 00 08 DE 6E AB 3C 27 16 74 23 00
<--00 00 71 25 00 11 96 91 17 84 FF 02 00 07 2E CC EB B6 BA 1F B0 9C 4D 0A 23 D8 39 1A 90 00
--> 84 82 01 00 10 62 68 D5 CE 75 B6 39 41 14 E9 94 B1 50 E1 C8 49
<--90 00
//put keyset 1
--> 84 D8 00 81 4B 01 80 10 6C CC 3D 43 CF C2 CD E6 CE AB C7 60 46 8B 7E FF 03 8B AF 47 80 10 6C CC 3D 43 CF C2 CD E6 CE AB C7 60 46 8B 7E FF 03 8B AF 47 80 10 6C CC 3D 43 CF C2 CD E6 CE AB C7 60 46 8B 7E FF 03 8B AF 47 27 02 3E BF DE 0E FE B6 00
<--69 82
When I auth without mac, I can put-keyset correctly.So It seems something wrong with C-MAC value.But I can send other command and get correct response with C-MAC.
The source data I input to calculate C-MAC is:
84 D8 00 81 4B 01 80 10 6C CC 3D 43 CF C2 CD E6 CE AB C7 60 46 8B 7E FF 03 8B AF 47 80 10 6C CC 3D 43 CF C2 CD E6 CE AB C7 60 46 8B 7E FF 03 8B AF 47 80 10 6C CC 3D 43 CF C2 CD E6 CE AB C7 60 46 8B 7E FF 03 8B AF 47.

The reason you get an error is because you did not encrypt sensitive data. GP mandates that security domain keys must be encrypted with the encryption session key (derived from Data Encryption Key), regardless of the security level used.

How does DIADEM import TDMS files? How gets every channel his number and groupindex? How can I determine which channel has which groupindex and number?

I store different channels in a TDMS file.
I like to have a time channel at the first position with group index 1 and number 1.
When I read the TDMS file with DIADEM the time channel (Float64) is on a differernt position, and the channels are not sorted alphabetically.
Here are my questions:
How does DIADEM import TDMS files?
How gets every channel his number and groupindex?
How can I determine which channel has which groupindex and number?
Best regards
Joerg

Hi Jörg,
i suppose that you´re programme whose create the *.tdms file is writing on false position. Try to create datas with timechannel on first indes in diadem, then save it and then open it again. you see that all is correct. So please tell me what programm in what version do you use and please attache it here.
Did you use the library for creating *.tdms files like in the link ?
http://zone.ni.com/devzone/cda/tut/p/id/6471
Here you find the gtdms_8.x.zip - when you extract it and opened the *.llb you find vi´s for all functions e.g. writing 2d array of strings to *.tdms file
when you open the subvi´s then you see how created and writing datas/structure to *.tdms files. Because *.tdms is binary you can´t see structure with open it in editor.
When you don´t have Labview you can use the 30 days test of current version 8.5 under following link
german version download link
https://lumen.ni.com/nicif/d/lveval/content.xhtml
english version download link
https://lumen.ni.com/nicif/us/lveval/content.xhtml
Hope it helps
Best Regards

Informix: Error while trying to set up start or end key for index read

Hi all
Im moving an application from weblogic 6.1 to 8.1, we're using informix as our databasemanager and are using informix's XA driver. However im running into the following error:
SQL State: IX000, Exception: java.sql.SQLException: [Internal] Error while trying to set up start or end key for index read [fmstopset_release],
SQL ErrorCode: -9847, Error Message: [Internal] Error while trying to set up start or end key for index read [fmstopset_release], RSAM ErrorCode: -101
...while accessing a table.
The same code runs fine twice, but the third and following times it fails with the above error code. I've tried setting the various XA flags available in the weblogic console but with no success so far.
Anyone have any input to this problem? Ive not seen many postings about this error out in the cyberspace and the fews ive seen never gets any response...so i just have to hope anyone in here know anything about it.
Best regards
JM

Ulf Akerberg wrote:
Hello
I managed to work around my problem by setting the "statement cache size" in the jdbc connection pool to 0. At least that seems to be a work around, im not fully happy with it.
I attach the stack trace from the exception, perhaps it will give someone an idea.
Btw, we're using sun.jdbc.rowset.ExtendedCachedRowSet to populate the resultset to a "disconnected resultset" which the application works with instead of the resultset. Any statements and resultsets that are created are closed before returning the ExtendedCachedRowSet to the application.
If the application works when statement caching is turned off, then it implies a bug in the
informix driver to do with re-using a prepared statement. Is the PreparedStatement used
the same way each time? (the one at AbstractDAO.java:166) What I mean to ask is, If/when
this statement is created with a given SQL string, are the parameters for that SQL always
set the same way?
thanks,
Joe
>
2004-09-10 15:45:05,603 ERROR [ExecuteThread: '14' for queue: 'weblogic.kernel.Default'] - SQLException: Generic SQL failed:
SELECT d.*,dt.dokument_typ FROM dokument d, OUTER dokument_typ dt WHERE d.dok_typ_id = dt.dok_typ_id AND d.dokument_id = ? ( 0:894),
SQL State: IX000, Exception: java.sql.SQLException: [Internal] Error while trying to set up start or end key for index read [fmstopset_release],
SQL ErrorCode: -9847, Error Message: [Internal] Error while trying to set up start or end key for index read [fmstopset_release], RSAM ErrorCode: -101
java.sql.SQLException: [Internal] Error while trying to set up start or end key for index read [fmstopset_release]
     at com.informix.jdbc.IfxSqli.addException(IfxSqli.java:3105)
     at com.informix.jdbc.IfxSqli.receiveError(IfxSqli.java:3419)
     at com.informix.jdbc.IfxSqli.dispatchMsg(IfxSqli.java:2282)
     at com.informix.jdbcx.IfxXASqli.receiveMessage(IfxXASqli.java:119)
     at com.informix.jdbc.IfxSqli.sendStatementQuery(IfxSqli.java:1464)
     at com.informix.jdbc.IfxSqli.executeStatementQuery(IfxSqli.java:1403)
     at com.informix.jdbc.IfxSqli.executeStatementQuery(IfxSqli.java:1333)
     at com.informix.jdbc.IfxResultSet.executeQuery(IfxResultSet.java:223)
     at com.informix.jdbc.IfxStatement.executeQueryImpl(IfxStatement.java:843)
     at com.informix.jdbc.IfxPreparedStatement.executeQuery(IfxPreparedStatement.java:244)
     at weblogic.jdbc.wrapper.PreparedStatement.executeQuery(PreparedStatement.java:80)
     at infrastructure.dao.AbstractDAO.genericSqlRead(AbstractDAO.java:166)
     at se.migrationsverket.dhs.domain.dao.DokumentDAO.findByDokId(DokumentDAO.java:64)
     at se.migrationsverket.dhs.domain.dao.DokumentDAO.findByDokId(DokumentDAO.java:43)
     at se.migrationsverket.dhs.generator.impl.pipeline.LoadDocumentPipeline.buildMultiDocument(LoadDocumentPipeline.java:99)
     at se.migrationsverket.dhs.generator.impl.pipeline.LoadDocumentPipeline.process(LoadDocumentPipeline.java:53)
     at se.migrationsverket.dhs.generator.impl.DHSDocumentGenerator.loadDocument(DHSDocumentGenerator.java:63)
     at se.migrationsverket.dhs.generator.DocumentGeneratorInternalHelper.loadDocument(DocumentGeneratorInternalHelper.java:129)
     at se.migrationsverket.dhs.services.document.internal.InternalDocumentManagerBean.loadDocument(InternalDocumentManagerBean.java:185)
     at se.migrationsverket.dhs.services.document.internal.InternalDocumentManager_6sz7e8_EOImpl.loadDocument(InternalDocumentManager_6sz7e8_EOImpl.java:532)
     at se.migrationsverket.dhs.action.documentgenerator.GeneratorAction.load(GeneratorAction.java:147)
     at se.migrationsverket.dhs.action.documentgenerator.GeneratorAction.perform(GeneratorAction.java:49)
     at se.migrationsverket.dhs.servlet.AbstractController.doPost(AbstractController.java:84)
     at se.migrationsverket.dhs.servlet.AbstractController.doGet(AbstractController.java:54)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6310)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Regards
JM

Set-IRMConfiguration failed with error "Cou ld not establish trust relationship for the SSL/TLS secure channel."

Hi, experts
I'm trying to configure a lab environment according tutorial http://www.msexchange.org/articles-tutorials/exchange-server-2010/compliance-policies-archiving/rights-management-server-exchange-2010-part3.html
After completing configuration, I execute cmdlet Set-IRMConfiguration -InternalLicensingEnabled $true, but get error
The remote certificate is invalid according to the validation procedure. ---> The underlying connection was closed: Cou
ld not establish trust relationship for the SSL/TLS secure channel. ---> Failed to get Server Info from https://exhv-65
94/_wmcs/certification/server.asmx.
+ CategoryInfo : InvalidOperation: (:) [Set-IRMConfiguration], Exception
+ FullyQualifiedErrorId : C810E449,Microsoft.Exchange.Management.RightsManagement.SetIRMConfiguration
Then I run cmdlet Test-IRMConfiguration -Sender [email protected] and get error
Results : Checking Exchange Server ...
- PASS: Exchange Server is running in Enterprise.
Loading IRM configuration ...
- PASS: IRM configuration loaded successfully.
Retrieving RMS Certification Uri ...
- PASS: RMS Certification Uri: https://server1/_wmcs/certification.
Verifying RMS version for https://server1/_wmcs/certification ...
- WARNING: Failed to verify RMS version. IRM features require AD RMS on Windows Server 2008 SP2 with the
hotfixes specified in Knowledge Base article 973247 (http://go.microsoft.com/fwlink/?linkid=3052&kbid=973247)
or AD RMS on Windows Server 2008 R2.
Microsoft.Exchange.Security.RightsManagement.RightsManagementException: Failed to get Server Info from https:
//server1/_wmcs/certification/server.asmx. ---> System.Net.WebException: The underlying connection was clos
ed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authenticatio
n.AuthenticationException: The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest async
Request, Exception exception)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequ
est asyncRequest)
at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Obje
ct state)
at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.ConnectStream.WriteHeaders(Boolean async)
--- End of inner exception stack trace ---
at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Exchange.Security.RightsManagement.SOAP.Server.ServerWS.GetServerInfo(ServerInfoRequest[] req
uests)
at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
--- End of inner exception stack trace ---
at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.ValidateRmsVersion(Uri uri, Se
rviceType serviceType)
at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.TryGetRacAndClc()
OVERALL RESULT: PASS with warnings on disabled features
From the error message, this issue seem to related with SSL/TLS connection. So I go back to check configuration and find out a difference to tutorial. Current SCP url is https://server1/_wmcs/certification, but in tutorial it is https://server1:433/_wmcs/certification.
On my opinion, I don't think it is the real reason.
So, how can I resolve this error? Could you give me some suggestion? Thanks in advance.
System Info:
Windows Server 2008 R2 + Exchange Server 2010 SP3 RTM

Hi
Please have a try with the solution on this KB article
“Error message when you try to test access from the Microsoft Dynamics CRM E-mail Router: "Incoming Status: Failure - The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel"”
http://support.microsoft.com/kb/954584/en-us
Cheers
Zi Feng
TechNet Community Support

How CSSCAN determines which indexes need to be rebuild ?

Hi everybody,
i'm currently migrating 3 Oracle databases that contain CP1252 characters unproperly stored in WE8ISO8859P1 instances.
The key steps of the migration are :
1. ALTERing CHARACTERSET to WE8MSWIN1252
2. changing CHARACTER SEMANTIC LENGTH for CHAR and VARCHAR2 columns
3. truncating data stored in VARCHAR2(4000) columns
2. Full export
3. Full import in a ALL32UTF8 instance
To do all of this (and especially the step 3), i use the CSSCAN utility (very practical !!!).
And i have a question about CSSCAN: how CSSCAN determines which indexes need to be rebuild. What is the logic ?
Looking at the CSSCAN report, i have a lot of cells/columns that are affected by the characterset migration, and i have just a few index to rebuild.
Why would i like to understand the logic ? Because i would like to rebuild ONLY indexes that REALLY need to be rebuilt and i am not sure that all the indexes specified by CSSCAN really need to be rebuilt.
Thanks for any information about that.
(and sorry for my english)
NB: i have managed "function-based indexes" specifically: i drop them before the export, and i recreate them after the import. So my question mostly target the "regular indexes"

1. All indexes whose key contains at least one character column with convertible or exceptional data, excluding indexes with names equal to some constraint name for the same owner.
plus
2. All functional indexes on tables that have columns needing conversion, excluding indexes with names equal to some constraint name for the same owner.
The condition regarding constraints does not seem to be very fortunate but it comes from times when the appropriate flag in index metadata was not yet available.
But note that in your migration scenario, you do not actually have to care much about indexes. Step 1 & 2 do not need any modifications to the user data and hence to index contents. Step 3, if done through UPDATE, will modify affected indexes automatically. Step 4 does not affect the database. Step 5 will recreate all existing indexes anyway.
-- Sergiusz

How to determine Secure Channel key set index or version within applet

Similar Messages

Maybe you are looking for