How to determine the protocol to use in Sender mail Adapter ?

Hi All
Can i use my Microsoft Exhange Server address while configuring Sender Mail Adapter .? If yes , then which protocol i can use out of IMAP and POP ?..
How do i determine which protocol i should use to connect to my exchange server ?
Thanks
rohan

Hi Rohan,
//Can i use my Microsoft Exhange Server address while configuring Sender Mail Adapter .?
Yes, you can.
//If yes , then which protocol i can use out of IMAP and POP ?..
You can use either of them. To know more on IMAP and POP, i would suggest you go through these links,
http://www.trincoll.edu/depts/cc/documentation/email/IMAP_vs_POP/default.htm
http://www.imap.org/papers/imap.vs.pop.brief.html
If your are using IMAP, you will have to specify, which folder from which you wnaty the emmail to be retrived, this is not needed for POP.
Hope this helps,
Regards,
bhavesh

Similar Messages

How to determine the purchasing group using BADI BBP_PGRP_FIND

Hello Friends
We use SRM Server 5.5 (Classic scenario).
As you know that, purchasing group has the responsible product categories in PPOMA_BBP, when user creates the shopping cart to determine the purchasing group.
In our case, we should determine the purchasing group using other criteria.
MM side is OK to determine the purchasing group using specific criteria.
Because Material Master has the purch. Group information.
In case of SRM, we should develop the logic using BBP_PGRP_FIND BADI.
But Im not sure how to use this badi.
We want to determine the purchasing group based on the following logic.
If described shopping cart without product ID
Do Standard purchasing group determination logic.
Else
Assign the purch group from MARC- EKGRP (Purchasing Group)
Is it possible to determine above the logic?
If yes, Could you give me some information?
Thank you,
Best regards,
SH
Message was edited by:
So Hee Lee

Thank you for your answer.
I found the way to develop the our logic using BADI: bbp_pgrp_find.
But Im not sure the following logic is correct.
To differentiate described req. or product id req, We check the E_ITEM PRODUCT using BBP_PD_SC_GETDETAIL.
IF E_ITEM PRODUCT is blank, Read the category ID to find the purchasing group.
To find the purch. Group, we can use FM: BBP_OM_DETERMINE_RESP_PGRP.
Import parameter: IS_RESP_ITEM_DATA Category _ID
Export parameter: ES_PURCH_DATA
ELSE
CALL the customer function to read the R/3 purchasing group from MARC- EKGRP
Search the HRT5500-TABNR using purchasing group from R/3.
Search the HRP5500 OBJID using HRT5500-TABNR
Call the FM: BBP_OM_DETERMINE_RESP_PGRP
Import parameter: IS_RESP_ITEM_DATA PROC_GROUP OBJID
Export parameter: ES_PURCH_DATA
Thank you
Best Regards
SH

How to determine the process alias using condition technique in Transportation & Shipment Scheudling?

Dear All,
I am trying to use the functionality Transportation and Shipment Scheduling in GATP.
I would like to know that how the sytem determines the process alias using condition technique in Transportation & Shipment Scheudling?
As the Transportation & Shipment Scheduling functionality can be extended further by using the configurable process to overcome the complex scenario. But it needs that process alias should not be determined by using the condition technique.
Moreover, is it possible to use both functionality simultaneously in the system. i.e. Transportation and Shipment Scheduling using condition technique and Transportation and Shipment Scheduling using configurable process?
Thanks & Regards
Piyush Ranpura

Hi Piyush,
I have added a small overview in the SCN WIKI which shows you the two ways for the process alias determination and also here as attachment:
http://wiki.sdn.sap.com/wiki/display/SCM/Time+and+Scheduling+Functions
Yes, depending on your customizing you can use both scheduling methods in parallel. e.g. you activate CPS just for a specific ITEM category or product and/or customer and/or....what ever you want.
best regards,
Michael

How to determine the IPS throughput using Cisco ASA 5500 IPS Solution?

Hello there!
I´ve been desinging a solution to protect de Server Farm and I intend to use the ASA 5500 series with AIP-SSM module. There´s any tool to determine the real throughput that I need? I mean, how to determine the performance (Firewall + IPS throughput), what main points I should consinder?

If the server farm is running production levels of traffic today you can get statistics off a variety of networking devices passing the existing traffic. Switches, routers and firewalls all count every byte of traffic they pass. There are plenty of tools that can gather this traffic into tables via SNMP too, such as MRTG.
Do not average your traffic over too great a time peroid, you will miss busy hour peaks. At most, use 5 min averages.
- Bob

How to determine the patch number used (installed using runInstaller)

Whilst it easy to find the patch number installed using opatch by using the lsinventory argument.
Is there a way to find patch number for a patch applied via runInstalled?
META-INF/MANIFEST.MF from platform/iam-platform-kernel.jar,gives the following:
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
Created-By: 19.1-b02 (Sun Microsystems Inc.)
Product-Version: 11.1.1.3.0
Build-Number: 11.1.1.3.0.0.0
Built-By: aime1
Build-Tag: Build_11.1_1_3.0_0_0
Built-at: 05/02/2011 06:46
Version: 11.1.1.3.0
Build-Label: IAM_11.1.1.5.0_GENERIC_110502.0500
Build-Transaction: NONE
But I need the exact patch number, eg, p1234567.
Anyone know where to find this information?
The system has been patched from 11.1.1.3 to 11.1.1.5
I am looking for the patches used for WLS, SOA and OIM.
Regards
Hanif

Another way to get it is:
SELECT XSD_CODE,XSD_VALUE FROM dev_oim.XSD WHERE xsd_code='XL_ADE_LABEL';
Check Note: 1247564.1 for 11.1.1.3 and 1360009.1 for 11.1.1.5 for builds to patch mapping. Check Note:1299977.1 for how to determine build numbers.
For WLS you can use: http://docs.oracle.com/cd/E13222_01/wls/docs81/admin_ref/clic.html
For OIM as mentioned above
For SOA: $mw_home\Oracle_SOA\bin\soaversion.cmd (or soaversion.sh) to know the SOA version or
SELECT version, status, owner FROM schema_version_registry where owner = 'DEV_SOAINFRA';-Bikash

How to determine the core currently used?

Hi,
does anybody knows a Java SE6 method that gets the current processor number?
It should run at least on WindowsXP with a dual core.
I'm aware of the fact that the core currently used is a very ephemeral information. Nevertheless I want to verify whether assumptions about the scheduling are correct.
All solutions without using JNI are welcome.
Thanks in advance
-- Thomas

I doubt it is possible. I am not even sure how you would do that with the windows API. Not sure it is even logical. Since a thread switch can occur at any time that means that an atomic operation would be needed to recover it and that going up/down the call stack to that point would all be places where it would become invalid.

How to determine the organizational unit using activity category ????????

Hello All
We are working on CRM 7.0 , we need to have the organizational determination based on the activity category , I have put the activity category in the attribute list then I created a determination rule type responsibility and it is working fine in the simulation but after I assigned the determination rule to the transaction type the organizational unity could not be determined. I tried the BADI CRM_ORGMAN_BADI but it was not help.
Any clues regarding this issue ?
Regards
Jacopo

No answers

How to determine the difference between a user sent mail and an auto-sent mail by another program?

Hi,
I am currently capturing the item_send event in an Outlook (2010/13) addin which then processes the email before it sends. Will this event fire for an email that is generated and sent automatically, i.e. without the user clicking the send button? For
example there may be another addin installed that emails hourly logs somewhere, or gives the user an option click another button to send a generated email to their support team.
Ideally, I would like my addin code in the item_send event to only run when the user has purposely sent the email themselves from a draft email by clicking the send button.
Thanks in advance,
Tom

I see the following idMso value in the Office 2013 Help Files: Office Fluent User Interface Control Identifiers files:
SendDefault
button
None (Core Tab)
TabNewMailMessage
GroupSend
2617
The <commands> section should be placed in the ribbon XML with your custom UI. See Temporarily
Repurpose Commands on the Office Fluent Ribbon for more information in the MSDN documentation.

VSTO development outlook plugin how to get the full storage path attachment send mail attachments added

Such as the title, but I have a filepath verified discoveries are empty, there is a member of the method will be invoked after GetTemporaryFilePath COM error, but also can not get in VSTO attach the member variable. Accessories are found himself in a temporary
directory exists, the registry seems to have a place to record the address of this directory, but this is his findings do not know can not be used as a method to obtain

Hello,
First of all, the forum is for Office Apps. That's why I'd recommend asking VSTO specific questions on the
Visual Studio Tools for Office (VSTO) forum instead. For Outlook dev questions see the Outlook for Developers forum .
> there is a member of the method will be invoked after GetTemporaryFilePath COM error, but also can not get in VSTO attach the member variable.
What exception do you get in the code? Could you please be more specific?
The GetTemporaryFilePath method is only valid for those attachments whose Type property
is OlAttachmentType.olByValue. That means that the attachment is a copy and that the copy can be accessed even if the original file is removed. For other attachment types, the GetTemporaryFilePath method
returns an error.
GetTemporaryFilePath also returns an error when accessing an Attachment object
in an Attachments collection
or in the AttachmentSelection object.
UseGetTemporaryFilePath only in attachment event callbacks listed below for various Microsoft Outlook items:
AttachmentAdd
AttachmentRead
AttachmentRemove
BeforeAttachmentAdd
BeforeAttachmentPreview
BeforeAttachmentRead
BeforeAttachmentSave
BeforeAttachmentWriteToTempFile
Where do you use the
GetTemporaryFilePath method of the Attachment class? What code do you use?

How to determine the ROWNUM in a Master Detail Form

Hello,
I am working in a Master Detail Form with Orders and Order Items Information; and I created a process that allows the users to select a Product ID on a tabular form, and the next column is populated automatically with the Product Description.
To achieve that, I followed some instructions by Denes Kubicek (http://apex.oracle.com/pls/otn/f?p=31517:241), but my case is slightly different:
<ul>I am using a wizard-created tabular form, instead of a manual tabular form; and </ul>
<ul>Instead of using another page as a Popup to pass the parameter of the ROWNUM, I am using a plug-in called “Tabular Form Super LOV” which is a modified version of the SkillBuilders’ Super LOV that works on Tabular Forms. </ul>
The Product ID is returned in the correct row by the plug-in; but in the case of the Product Description, it is always returned into the first row; and my problem is that I don't know how to determine the row where the user clicked to call the plug-in.
I set up an example in apex.oracle.com in case someone would like to look at it:
Workspace: ediazjorge
Username: test
Password: test
App Name: Sample App
App Number: 1550
BTW, I am using Apex 4.1.1.00.23 and Oracle DB 10.3.2.
Thanks in advance,
Erick

Hello VC,
Thank you for your time and help.
Unfortunately, it is still not working properly:
1. When the Popup LOV opens, the first row of the tabular form is 0, the second row is 1, and so on. How can I assign the values starting with 1 and in the format *0001* ? (I am still a novice on Apex and new to JavaScript :-), sorry about that).
--2. Also, when I close the Popup LOV, the value of P1_ROWNUM is ‘undefined’ again so I'm not sure if the Product Name column will be populated.--
3. And finally, you are using the jQuery Selector uPopupLOVIcon, which is an attribute of the Cloudy Theme. In my real application (Apex 4.1.1.00.26), my element looks like: *<img src="/i/lov_16x16.gif" width="16" height="16" alt="Popup Lov" alt="List" style="vertical-align:middle;" align="middle" />*. What do you recommend me to use as a jQuery Selector?
Again, I really appreciate your help and time. I think you solved the most difficult part.
Thank you so much,
Erick
Update: I just found out that the problem with my comment 2 is because I didn’t delete the previous dynamic action that set the value to P1_ROWNUM.
Edited by: ediazjorge on Sep 18, 2012 11:20 AM

How to determine the mount point for directory /tmp ?

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
"Free Space: Rac2: /tmp"
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available.
Expected value: n/a
Actual value: n/a
I have checked the free space using the command:
[root@Rac2 /]# df -k /tmp
Output:
Filesystem 1k-blocks used Available Use% Mounted on
/dev/sda1 30470144 7826952 21070432 28% /
As you see above, the free space is enough, but could not determine mount point for /tmp.
Do any folk understand how to determine the mount point for directory /tmp ?
Thanks.

I have just checked "/home/oracle/.bash_profile". But in my computer, there is no "oracle" under /home directory.Is this your first time Linux and Oracle installation? I had a brief look at your referenced link. The reason why you do not find a "oracle" user is because the instructions use "ora11g" instead, which, btw, is not standard. The directories of your installation and your installation source can be somewhat different from known standards and you will have to adjust it to your system.
My best guess is that you have either missed something in the instructions or you need to ask the author of the blog what is wrong. The chance to find someone here who has experience with these custom instructions is probably unlikely.
I suggest you try to locate the cluster verification tool, which should be in the bin directory of your grid installation. Alternatively you might want to check the RAC, ASM & Clusterware Installation forum: RAC, ASM & Clusterware Installation

How to determine the field size

I am going to make a multiplatform application that hopefully
will run on linux and windows 2000.If the os is 2000, then I will use
vb.net/aspx else I'll use java servlets. I make the connection
to the web server ( through HTTP) not directly to database server.
So, the resultset will be stored in the String object. The columns
will be separated by delimeter. Our problem is how to determine
the size and type of the fields of mssql,oracle and postgres database
so that we can include it in the String object.
Ex.
String sResultSet=new String();
ResultSet rs=statement.executeQuery(sSQL);
while(rs.next()){
sResultset=sResultSet + rs.getString(field1) + "||" + rs.getString(field2) + "||";
vertical bars acts as delimeter
supposedly this is the code:
sResultset=sResultSet + rs.getString(field1) +"_" + rs.getFieldType() + "_"+
rs.getFieldSize() + "||" + rs.getString(field2) +"_" + rs.getFieldType() + "_"+
rs.getFieldSize() + "||";
supposedly this is the code if rs.getFieldType() and rs.getFieldSize() methods are existing
Anyone can give me an idea how to get the field type and field size of the database?
thanks in advance

Yes, but I dont know how to do it.
Can you give me an example of using it.
Thanks in advance

How to determine the cost center

Dear experts:
Could you give me some suggestions about how to determine the cost center depending on the different
storage location when we use the t-cdoe MI07
Thanks in advance.
Rong

Hello experts!!!
how have you resolved this issue???
I have the same situation, and i dont know how to manage this.
Thank you very much in advance.
Best regards,
M. Cecilia Vacatello.

How to determine the type of the jobject... similar to instanceof

hi,
I would like to know how to determine the jobject reference of an instance is of which class.
this is something similar to instanceof we use in java.
is there any thing like 'instanceof' in JNI. if there how to use it?
i got this as objective question for which answers were(i do not remember exactly)
1.instanceof
2.assignedto
i could nt het much help in googling.
thanks in advance

Hi
The JNI provides a native version to the java instanceof operator, this function takes two arguments
an object refrence and a class refrence and reports JNI_TRUE.
jclass myclass = env->FindClass("your class name");
if(env->IsInstanceOf(obj,myclass) == JNI_TRUE)
// obj is of type myclass
}Regards
pradish

How to determine the solution's ID in absl?

Hello Community,
I have a simple question yet I fear there is no simple answer (possibly no answer at all).
The question is:
Does any body know ways how to determine the ID (e.g. Y123ABCDY_) of the solution the code is running in?
My use case is the following:
We have a solution template which will be deployed in different customer tenant.
Thus, each deployment will have a different solution ID.
Now, somewhere in code, we generat PDFs using the OutputManagementUtilities.GetPDF reuse library.
This method requires the form template code of the pdf to be generated as a parameter.
However, this PDF form template code is composed of the solution ID and a fixed suffix.
Thus, currently I need to modify the absl code in each customer installation to manually modify the form template code prefix to the solutions solution ID.
Therefore I'd like to construct the form template code in absl but for this I need a way to determine the solution's ID.
Any ideas?
Best regards,
Ludger

Hi Fernando.
After reading your post I initially thought "what is the ObjectTypeCode" supposed to do any good to determine the solution ID"?
Using the Object Type code of a custom bo is indeed a way to solve this problem.
With a little additional code I can extract the relevant solution ID part from there.
Thanks for the hint, that was really useful.
Best reegards,
Ludger

How to determine the protocol to use in Sender mail Adapter ?

Similar Messages

Maybe you are looking for