How to determine wich button is clicked?

... and so on. If you have the time the whole thing is
downloadable
here.. Greetings
from Sweden. Here's some of the code...

that is very easy to do that.
First u assign a separate variable for each button (or) keep
an array where its length is total no of buttons instead of
variables.Store 0 as values for all buttons.
When one button is clicked make the index for that button to
1 and if another button is clicked make the index for that button
to 1 and remaining values to 0.
So,write a function to check the values in array and if 1 is
there change the color of that button to grey and other buttons to
black.
Try this and tell me whether it works or not.

Similar Messages

How to change the button's clicked color

Dear all,
How to change the button's clicked color
I want it to be white in color as my button's background color is white
Thanks

How to change the button's clicked colorvia the UIManager

How to identify which button is clicked in an action

Hi,
I am just checking whether it is possible to build calculator or not in webdynpro for abap.
I have some buttons and i have associated same action for all the buttons and in that action i would like to know which button is clicked.
Please let me know the code for that
Thanks
Bala Duvvuri

Hi Bala,
Its possible. Just go to the action handler for the button & read the attribute ID of the WDEVENT which is passed by the framework. This id will contain the id of the button which triggered the event. Consider the code fragment below:
method ONACTIONACTION .
DATA: lv_button_name type string.
lv_button_name = wdevent->get_string( name = 'ID' ).
endmethod.
At the end of execution lv_button_name will have the ID of the button which triggered the event.
Regards,
Uday

Determine which button is clicked

I am creating the download buttons on my page dynamically and I am assigning the name also dynamically attaching the counter with the name. Now On form post, i want to know which button( button at which counter ) was being pressed. Could u help me on this.

Use request.getParameterNames( ) to get an enumeration of all the names passed by the form. You can then go through the list and determine which button was pressed since the name of that button would be passed along.
If you are uncomfortable with using the enumeration technique, do a request.getParameter( button_name ) for each button and check whether you get a null value which implies the button wasn't pressed, or the counter value, which implies the button was pressed. If you have a lot of buttons, this results in some redundant code, but if you have only one or three, then this is probably an ok way to do it.

How to determin wich control has focus

I'm using arrow keys to drive an external device. I catch the main vi key events and act on it. On this vi is also a textinput. When I navigate true is input with arrow keys the main vi events are also fired. That of course should not happen. Is there a way to distinguis between such events. Thus between a vi's main keyboard events and keyboard events in a control on this vi. I thought of finding out wich control has focus.?

Sometimes when you dialog controls, the last "OK" button added to the front panel has the focus turned on by default. You can right click on the control and select "Customize >> Key Navigation" and select "None" in the list.
It seems you have a different problem and are using event structure. Nomally we use the "Value Change" as event condition. Is it possible that you may choose a different condition, such as "Key Down, Key up, etc"?
-Joe

How to enable a button on click of an adjoining list box

Hi,
I have a requirement that :
the button "Add to the list" should be enabled only when the user clicks on the list box "product list". This is to ensure that the user is looking at the list before adding a new product.
I tried that the button is disabled by default and then wrote the following line in the list box
onChange="document.forms(0).ADD_TO_LIST.disabled=false;"
But it is not working.
Please guide me
Appreciate your help.
Thanks,
Gary

gary1234 wrote:
Dear Cotton,
I tried searching for a Java Script forum. Could not find it.Dear Gary,
I question either your competence or the veracity of this claim. A Google search for JavaScript forum returns 19,000,000+ results.
Please reply if you can help.
Thanks for enlightening me that Java script is different than Java.This is the third time now you have been so enlightened.
I am not sure how is it harming you if I post the Java script question here.Please don't be a wank. It is inappropiate for anyone, including you, to ask off topic questions on this, or any other forum. This forum is NOT for JavaScript questions and that is all there is to it.
So now go to Google. Type JavaScript Forum into the search box and find yourself a JavaScript forum and ask your JavaScript question there.
This isn't rocket science and your excuse as to why you haven't done so is at best flimsy but more likely just a lie.

How to handle a button double click

I know how to define and IBAction and link it to a control by (Click-Drag)ing.
But that does not make me chose what action (event for x-Microsoft) in the control am I linking to.
By other words, when I click-drag, I dont mention, anywhere that I want this action to be linked to the "Click" event of a button. So what if I want this action method to be called when a button is double clicked for example, or when the mouse moves over it.
Thanks

Hi Tony, and welcome to the Dev Forum!
The good news is Apple provides thorough documentation on tracking, interpreting and handling Cocoa mouse events. The bad news is the info is carved into pieces that are scattered all over the library. The challenge is to identify the docs that contain one or more pieces of the puzzle, and then to fit everything together.
As to double clicks, there's no NSControl equivalent to the double-click notification that many Windows controls send (e.g. BN_DOUBLECLICKED). Also, as you've seen, when connecting an event to an action method in IB, there's only one event to choose from (Cocoa Touch is different in this regard, btw. You'll have a choice of several events when connecting a UIControl object to an action method in IB, though "double-touch" isn't among them).
So how do Cocoa programmers detect a double click in, for example, an NSButton? The default action message for this class is generated by a NSLeftMouseUp event. I.e. when the left button is released while the control is tracking the cursor.
One crude but effective solution is to have the listener (the action method connected to the button) set an ivar and start a one-shot timer on the first message. If a second message is received before the timer method resets the ivar, we have a double click. Otherwise we have two single clicks.
A more general solution is based on two methods you might easily overlook. Firstly, [setContinuous:|http://developer.apple.com/mac/library/documentation/Cocoa/Refe rence/ApplicationKit/Classes/NSCellClass/Reference/NSCell.html#//appleref/doc/uid/20000074-BBCCCEAA] allows you to configure the associated NSActionCell object to send a stream of messages to the button's target instead of just one. The stream starts with the mouse down event that initiated tracking and ends with the mouse up that ends tracking (also see [trackMouse:inRect:ofView:untilMouseUp:|http://developer.apple.com/mac/library/ documentation/Cocoa/Reference/ApplicationKit/Classes/NSCellClass/Reference/NSCell.html#//appleref/doc/uid/20000074-BBCCJAFJ]).
The next piece of the puzzle is the [currentEvent|http://developer.apple.com/mac/library/documentation/Cocoa/Refere nce/ApplicationKit/Classes/NSApplicationClass/Reference/Reference.html#//appleref/occ/instm/NSApplication/currentEvent] method of NSApplication. This returns the NSEvent object the started the current event cycle, i.e., the event which caused NSButton to send the current action message.
Thus the listener has access to the stream of event objects which represents the mouse activity from the start of tracking to the end. Using the position and time stamp data from this stream, the listener can distinguish between clicks and drags (hovering is detected differently; I won't try to cover that topic in this post).
A couple reference links that might help with the rest of the puzzle:
[Handling Mouse Events|http://developer.apple.com/mac/library/documentation/Cocoa/Conceptual/Ev entOverview/HandlingMouseEvents/HandlingMouseEvents.html#//apple_ref/doc/uid/100 00060i-CH6-SW1]
[Control and Cell Programming Topics for Cocoa|http://developer.apple.com/mac/library/documentation/Cocoa/Conceptual/Con trolCell/ControlCell.html#//apple_ref/doc/uid/10000015i]
Hope that helps!
\- Ray

How to build a button on click of which opens a list below it

Hi,
I have a requirement wherein onclick of button I want to open/close list/popup (which is displayed below button, just like in select list) and can select any item from list to do some action.
It is required urgent. Can anyone guide me please?
Thanks!

This is the wrong place for urgent requests.
Just like select list? Why not select list?
What version are you? If >= 4.x, you can hide a region on entry, then show/refresh region on click of button using dynamic action.

How can I determine which image was clicked in 3D carousel?

I have been modifying some 3D carousel code that I found in hopes that I can get it such that when image "resolv2.jpg" (or any of my other images) is clicked on at the front of my carousel, it goes to a specific webpage. By just replacing "moveBack(event.target) from the toggler section of the code with "navigateToURL:(newURLRequest('http://google.com'), the target DOES sucessfully go to google when clicked on. However, I want to modify this code by altering the else statement to say something to the effect of "else if event.target (clicked on object) is 'resolv2.jpg' THEN go to google". So essentially, my question is how can I determine which image was clicked? Here is the entire code with the area I was altering bolded:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical" applicationComplete="init();" backgroundGradientColors="[#000033, #000033]" backgroundGradientAlphas="[1.0, 1.0]">
<mx:Script>
          <![CDATA[
//Import Papervision Classes
               import org.papervision3d.scenes.*;
               import org.papervision3d.cameras.*;
               import org.papervision3d.objects.*;
               import org.papervision3d.objects.primitives.*;
               import org.papervision3d.materials.*;
               import org.papervision3d.materials.shadematerials.*;
               import org.papervision3d.materials.utils.MaterialsList;
               import org.papervision3d.lights.*;
               import org.papervision3d.render.*;
               import org.papervision3d.view.*;
               import org.papervision3d.events.*;
               import org.papervision3d.core.*;
               import org.papervision3d.lights.PointLight3D;
               import flash.filters.DropShadowFilter;
                     import caurina.transitions.*;
                     private var numOfItems:int = 5;
                     private var radius:Number = 600;
                     private var anglePer:Number = (Math.PI*2) / numOfItems;
                     //private var dsf:DropShadowFilter = new DropShadowFilter(10, 45, 0x000000, 0.3, 6, 6, 1, 3);
               public var angleX:Number = anglePer;
         public var dest:Number = 1;
               private var theLight:PointLight3D;
        //Papervision Engine
               private var viewport:Viewport3D;
               private var scene:Scene3D;
               private var camera:Camera3D;
               private var renderer:BasicRenderEngine;
         private var planeArray:Array = new Array();
         [Bindable]
         public var object:Object;
         private var arrayPlane:Object;
         private var p:Plane;
         //Initiation function
         private function init():void
         viewport = new Viewport3D(pv3dCanvas.width, pv3dCanvas.height, false, true);
         pv3dCanvas.rawChildren.addChild(viewport);
         viewport.buttonMode=true;
         renderer = new BasicRenderEngine();
         scene = new Scene3D();
         camera = new Camera3D();
         camera.zoom = 2;
         createObjects();
         addEventListeners();
//Create Objects function
          private function createObjects():void{
          for(var i:uint=1; i<=numOfItems; i++)
                    /* var shadow:DropShadowFilter = new DropShadowFilter();
                    shadow.distance = 10;
        shadow.angle = 25; */
                    var bam:BitmapFileMaterial = new BitmapFileMaterial("images/resolv"+i+".jpg");
                    bam.oneSide = false;
                    bam.smooth = true;
        bam.interactive = true;
                    p = new Plane(bam, 220, 200, 2, 2);
                    p.x = Math.cos(i*anglePer) * radius;
                    p.z = Math.sin(i*anglePer) * radius;
                    p.rotationY = (-i*anglePer) * (180/Math.PI) + 270;
                    scene.addChild(p);
                    //p.filters=[shadow];
                    p.extra={pIdent:"in"};
                    p.addEventListener(InteractiveScene3DEvent.OBJECT_PRESS, toggler);
        planeArray[i] = p;
          // create lighting
        theLight = new PointLight3D();
        scene.addChild(theLight);
        theLight.y = pv3dCanvas.height;
          private function toggler(event:InteractiveScene3DEvent):void
                        // if the cube's position is "in", move it out else move it back
                        if (event.target.extra.pIdent == "in")
                                moveOut(event.target);
                        else
                               moveBack(event.target);
                private function moveOut(object:Object):void
                          trace(object +" my object");
                        // for each cube that was not selected, remove the click event listener
                        for each (var arrayPlane:Object in planeArray)
                                if (arrayPlane != object)
                                        arrayPlane.removeEventListener(InteractiveScene3DEvent.OBJECT_PRESS, toggler);
                        //right.enabled=false;
                        //left.enabled=false;
                        // move the selected cube out 1000 and rotate 90 degrees once it has finished moving out
                        Tweener.addTween(object, {scaleX:1.2, time:0.5, transition:"easeInOutSine", onComplete:rotateCube, onCompleteParams:[object]});
                        Tweener.addTween(object, {scaleY:1.2, time:0.5, transition:"easeInOutSine", onComplete:rotateCube, onCompleteParams:[object]});
                        // set the cube's position to "out"
                        object.extra = {pIdent:"out"};
                        // move the camera out 1000 and move it the to same y coordinate as the selected cube
                        //Tweener.addTween(camera, {x:1000, y:object.y, rotationX:0, time:0.5, transition:"easeInOutSine"});
                private function moveBack(object:Object):void
                        // for each cube that was not selected, add the click event listener back
                        for each (var arrayPlane:Object in planeArray)
                                if (arrayPlane != object)
                                        arrayPlane.addEventListener(InteractiveScene3DEvent.OBJECT_PRESS, toggler);
                        // move the selected cube back to 0 and rotate 90 degrees once it has finished moving back
                        Tweener.addTween(object, {scaleX:1, time:0.5, transition:"easeInOutSine", onComplete:rotateCube, onCompleteParams:[object]});
                        Tweener.addTween(object, {scaleY:1, time:0.5, transition:"easeInOutSine", onComplete:rotateCube, onCompleteParams:[object]});
                        // set the cube's position to "in"
                        object.extra = {pIdent:"in"};
                        // move the camera back to its original position
                        //Tweener.addTween(camera, {x:0, y:1000, rotationX:-30, time:0.5, transition:"easeInOutSine"});
                        //right.enabled=true;
                        //left.enabled=true;
                private function goBack():void
                        // for each cube that was not selected, add the click event listener back
                        for each (var arrayPlane:Object in planeArray)
                                if (arrayPlane != object)
                                        arrayPlane.addEventListener(InteractiveScene3DEvent.OBJECT_PRESS, toggler);
                private function rotateCube(object:Object):void
                        //object.rotationX = 0;
                        //Tweener.addTween(object, {rotationZ:0, time:0.5, transition:"easeOutSine"});
          private function addEventListeners():void{
    this.addEventListener(Event.ENTER_FRAME, render);
//Enter Frame Listener function
private function render(e:Event):void{
                 renderer.renderScene(scene, camera, viewport);
                 camera.x = Math.cos(angleX) * 800;
                 camera.z = Math.sin(angleX) * 800;
private function moveRight():void
          dest++;
          Tweener.addTween(this, {angleX:dest*anglePer, time:0.5});
          //goBack();
private function moveLeft():void
          dest--;
          Tweener.addTween(this, {angleX:dest*anglePer, time:0.5});
          //goBack();
          ]]>
</mx:Script>
          <mx:Canvas width="1014" height="661">
          <mx:Canvas id="pv3dCanvas" x="503" y="20" width="400" height="204" borderColor="#110101" backgroundColor="#841414" alpha="1.0" backgroundAlpha="0.57">
          </mx:Canvas>
          <mx:Button x="804" y="232" label="right" id="right" click="moveRight(),goBack()"/>
          <mx:Button x="582" y="232" label="left" id="left" click="moveLeft(),goBack()" />
          </mx:Canvas>
</mx:Application>

Your answer may be correct, but I am very much a beginner to actionscript, and I was wondering moreso if it is possible to determine the root/url (i.e. images/resolv2.jpg)? Or even if InteractiveScene3DEvent calls a variable that holds this url? However, specifically, I'm just wondering if the actionscript itself could determine the url in a line of code such as "if object == BitmapFileMaterial("/images/resolv2.jpg"); "? Also, here's a copy of InteractiveScene3DEvent in more detail if you think that will help:
public class InteractiveScene3DEvent extends Event
                     * Dispatched when a container in the ISM recieves a MouseEvent.CLICK event
                    * @eventType mouseClick
                    public static const OBJECT_CLICK:String = "mouseClick";
                     * Dispatched when a container in the ISM receives an MouseEvent.MOUSE_OVER event
                    * @eventType mouseOver
                    public static const OBJECT_OVER:String = "mouseOver";
                     * Dispatched when a container in the ISM receives an MouseEvent.MOUSE_OUT event
                    * @eventType mouseOut
                    public static const OBJECT_OUT:String = "mouseOut";
                     * Dispatched when a container in the ISM receives a MouseEvent.MOUSE_MOVE event
                    * @eventType mouseMove
                    public static const OBJECT_MOVE:String = "mouseMove";
                     * Dispatched when a container in the ISM receives a MouseEvent.MOUSE_PRESS event
                    * @eventType mousePress
                    public static const OBJECT_PRESS:String = "mousePress";
                     * Dispatched when a container in the ISM receives a MouseEvent.MOUSE_RELEASE event
                    * @eventType mouseRelease
                    public static const OBJECT_RELEASE:String = "mouseRelease";
                     * Dispatched when the main container of the ISM is clicked
                    * @eventType mouseReleaseOutside
                    public static const OBJECT_RELEASE_OUTSIDE:String = "mouseReleaseOutside";
                     * Dispatched when a container is created in the ISM for drawing and mouse interaction purposes
                    * @eventType objectAdded
                    public static const OBJECT_ADDED:String = "objectAdded";
                    public var displayObject3D                                        :DisplayObject3D = null;
                    public var sprite                                                            :Sprite = null;
                    public var face3d                                                            :Triangle3D = null;
                    public var x                                                                      :Number = 0;
                    public var y                                                                      :Number = 0;
                    public var renderHitData:RenderHitData;
                    public function InteractiveScene3DEvent(type:String, container3d:DisplayObject3D=null, sprite:Sprite=null, face3d:Triangle3D=null,x:Number=0, y:Number=0, renderhitData:RenderHitData = null, bubbles:Boolean=false, cancelable:Boolean=false)
                              super(type, bubbles, cancelable);
                              this.displayObject3D = container3d;
                              this.sprite = sprite;
                              this.face3d = face3d;
                              this.x = x;
                              this.y = y;
                              this.renderHitData = renderhitData;
Thank you so much!

How to Capture the event when minimized button is clicked of a JFrame?

Hi All,
In my SWING application, I want to do something when the minimized button is clicked. But not able to understand how to do that.
My basic requirement is like that, if I minimize the JFrame, it should be minimized to system tray with an icon. Again when the icon is clicked, the frame should be maximized in the Windows.
Also, how to make my JFrame visible/invisible. If I close it, then the process will got killed... that I don't want to happen. Should I us setVisible(true/false) for the frame... Please suggest...
Thanks,
Ujjal

There could be some mistake in my basic understanding... Anyway this is what I wrote...
import java.io.*;
import java.awt.*;
import javax.swing.*;
public class WindowIconify extends JApplet
     JFrame jf;
     JPanel jp;
     public void run()
          jf = new JFrame("test");
          jf.setSize(200,200);
          jp = new JPanel();
          jp.setBackground(Color.BLACK);
          jf.add(jp);
          jf.setVisible(true);
     public boolean handleEvent(Event event)
          if ( event.id == Event.WINDOW_ICONIFY)
               System.out.print("iconifying");
          return true;
     public static void main(String args[])
          WindowIconify wi = new WindowIconify();
          wi.run();
}

SRM RFx Response - How to check if a button is clicked or not

Hi All,
This is rani. Im very new to SAP.
Im into my first project, in which im having an Immediate enhacement.
In SRM Portal, I need to logged in as bidder to create a bid response.
"Participate" button is there, i need to clicked that button, this is mandatory.
So how and where to check whether the button is clicked or not.
else i need to raise the error message in BBP_DOC_CHECK_BADI and some fileds needs to be grayed out.
The webdynpro component is FPM_OIF_COMPONENT.
Can u please help me out in this regard.
Thanks in Advance,
Rani.

Hi Rani ,
In SRM 7.0 the system variables ( sy-ucomm & sy-Tcode ) will not work .
if you want the action code triggered in the Webdynpro screen inside the BADI: BBP_DOC_CHECK_BADI
kindly study the SAP Note 1334202 - How to get current action ID and transaction group
Below piece of code will give you the action Id in side the badi
DATA: lo_trans_context TYPE REF TO /sapsrm/if_transaction_context,
lv_action TYPE /sapsrm/pdo_action_type,
lv_tcode TYPE /sapsrm/transaction_group.
lo_trans_context = /sapsrm/cl_transaction_context=>/sapsrm/if_transaction_context~get_instance( ) .
lv_action = lo_trans_context->get_current_action( ). " replacement for sy-ucomm
lv_tcode = lo_trans_context->get_transaction_group( )." replace ment for sy-tcode
kindly go through the SAP note provided .
Regards
Chinnaiya P
Edited by: chinnaiya pandiyan on Jun 27, 2011 7:34 PM

How to check if a button is clicked or not

Hi All,
This is rani. Im very new to SAP.
Im into my first project, in which im having an immediate enhancement.
In SRM Portal, I need to logged in as bidder to create a bid response.
Participate button is there, i need to clicked that button, this is mandatory.
So how and where to check whether the button is clicked or not.
else i need to raise the error message in BBP_DOC_CHECK_BADI and some fileds needs to be grayed out.
The webdynpro component is FPM_OIF_COMPONENT.
Can u please help me out in this regard.
Thanks in Advance,
Rani.

HI，rani；
you can use the FM :BBP_PD_BID_GETDETAIL ,you will get the detail of the Rfx ,and check the status of the Rfx !
Alex

How to Create a Dynamic http address that opens the Explorer Window for a List Item When a Button Is Clicked--Currently Trying to Make this Work with Javascript

I have created a button (via Content Editor) that uses JavaScript to open the Attachments folder of a list item in the Explorer Window in SharePoint 2010. The purpose is to have drag and drop functionality for each list item, having multiple attachments.
The button works but opens the "Attachments" folder containing all of the other folders for each list item (one folder per item). It seems that when you add an attachment to a list item, SharePoint numbers the folder based on the item's ID. What
I'm trying to do is take the JavaScript I have and have it run when a button is clicked in a custom form. When it runs, I'm trying to get it to open the "specific" folder for the list item. I have had success creating a hyperlink in the list that
does this; however, the link WILL NOT work until I use the Content Editor created button that runs JavaScript, that prompts me to click OK to my profile certificate, and then opens the Attachment folder. After that occurs, I can use my hyperlinks without issue
because I'm no longer prompted to click OK for my cert.
So I'm trying to take the JavaScript I have and place it in a list item form (custom form) and have it run when a form button is clicked. The problem is I have very little knowledge of JavaScript (did I mention little?) and
"don't know how to take the "http:" address I have in the script and append to it the list item ID, according to the record I have open."
So that for any record I open, the script will grab the corresponding record ID (or list item ID) and append it.
Here's the script I'm working with (which I didn't create but am grateful for):
<style>
.httpFolder {behavior:url(#default#httpFolder);}
</style>
<script text = "javascript">
function fnOpenFolderView(){
oDAV.navigateFrame("https://server/collection/site/subsite/Lists/Sublist/Attachments","_self");
</script>
<div id = "oDAV" class = "httpFolder"/>
<input type = "button" value = "Open Attachment Folder" onclick = "fnOpenFolderView()"/>
The above script, in the Content Editor, creates a button that opens the Attachments folder for the corresponding SharePoint list.
JackSki123

Hello Thriggle,
Thank you for pointing that out. I appended your "GetUrlKeyValue" to the end and it worked. That said, I noticed it doesn't run as smoothly as when I simply click on the Content Editor button I created that resides on the SharePoint List
ASPX page (not the form). The Content Editor button has the same code, minus the "GetUrlKeyValue". I click it; I get prompted to choose my cert; it opens right up.
Now go to the ASPX Display form where I dump the code in a table cell. Button appears in cell; I click it; wait; wait; I get prompted for cert; it opens. Do I need some sort of "throttle" for the JavaScript? For instance, I thought before running
JavaScript, you reference the library first. This code doesn't do that. I'm wondering if there's something more I need to make this run smoothly. Thank you both for getting me this far.
JackSki123

How can I set a value in a field before create when a New button is clicked

Hi,
I am using
JDeveloper 10.1.3.1.0.3984 and
JHeadstart 10.1.3.1 release 10.1.3.1.26
I have one group and there is a detail group under that group.
From main group to detail group there are 3 field relating those groups.
field1
field2
fieldSEQ (auto-generated by database trigger)
These 3 fields are PK.
In the detail group, there is a New button. So, when the New button is clicked, it tries to create the record with those 3 fields value as those are coming from main group. As a result it's giving the duplicate error as that record already exists in the table.
But I don't want to create the record with that SEQ as that will be created in the trigger.
How can I set the SEQ temporarily any no. (-1) before create when the New button is clicked?
Can anybody help?
Thanks
Syed Jabbar
University of Windsor
Windsor, ON, Canada

Hello Syad,
What I would suggest is setting the sequence number at the creation of the entity object (so in the create() method) by using the database sequence. This way it will always be unique.
So something like:
protected void create(AttributeList AttributeList) {
super.create(AttributeList);
SequenceImpl sequence =
new SequenceImpl("KCP_SEQ", getDBTransaction());
setFieldSeq( sequence.getSequenceNumber());
If this still does not solve it: please go to the ADF Forum since this problem is an ADF problem, not a JHeadstart problem.
Regards,
Evert-Jan de Bruin
JHeadstart Team.

How to open a form on click of a button in infopath

I have created an infopath form on a list. I need to create a button on the pape on click of which the last item created by the user should open. I mean the edit form of that list item should open.
How can we do this ?
Thanks for your response in adv.
Regards,
prajK

Hi,
Per my understanding, you might want to add a button on a page, when clicking it, the last form which is created by the current user will open.
As it might require to query the last form created by current user, custom code would be required.
A solution is that, you can query the URL of the last form created by the current user using JavaScript Client Object Model, generate a button with the URL retrieved
using JavaScript. Then when user open this page, the button will be created dynamically, user clicks it, the last form created by this user will open.
More information about JavaScript Client Object Model:
How to: Create, Update, and Delete List Items Using JavaScript
http://msdn.microsoft.com/en-us/library/office/hh185011(v=office.14).aspx
Common Programming Tasks in the JavaScript Object Model
http://msdn.microsoft.com/en-us/library/office/hh185015(v=office.14).aspx
About how to create a button using JavaScript:
http://stackoverflow.com/questions/7707074/creating-dynamic-button-with-click-event-in-javascript
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to determine wich button is clicked?

Similar Messages

Maybe you are looking for