How to develop/print a report wider than 8.5 inches, why cant we landscape

Hi All Gurus,
I am new to Oracle Reports. I have a problem, I have a report that has rows longer than normal A4, A5, A6 paper width, so report lines either tend to go on next page or on next line of the same page. Also Oracle Report is not allowing me to print report in landscape mode, why this limitation ? I am wondering, cuz in older character based tools (Foxpro, Informix-4GL), we could easily print wider reports on a line printer which always had a capacity of 132 characters (and in condensed mode, 224 characters). So only small (and very simple) reports were printed on regular paper of 80 characters (8.5 inches wide), but for almost all real use reports we were able to use 132 (224 in condensed) characters paper.
How can we do this ith Oracle GUI report builder?. Why are we limited to 80 character paper size? why cant we print report in landscape mode? It is not, in any case, allowing me columns that go beyond 80 characters (8.5 inches) on a line. If this is an Oracle limitation, I would say Oracle Reports cannot be used for actual reporting, it is just a fancy with GUI and colors!!!!!
Can anybody answer my questions? please tell me an immediate solution.
Thanks in Advance

You can go to Object Navigator, under Layout Model, click the Main Section icon to open the property, change to Width from 8.5 to 11 and Height from 11 to 8.5. Do the same for Header/Trailer Sections if needed.
At report printing, choose Landscape Orientation.
DC

Similar Messages

How can I print a report in JDev 11g TP4

I am using JDev 11g TP4 .. in ADF application how can I print a report?
Thank you
Sameh Shokry

You do file->print from your browser's menu I guess.
There is also this:
http://one-size-doesnt-fit-all.blogspot.com/2008/03/creating-printer-friendly-jdev-adf.html

How can I print with a wider left margin in Preview? (OSX 10.5)

How can I print with a wider left margin in Preview? (OSX 10.5)
To punch Binder Holes.
Should be easy ... Make a Custom page with a wider left margin ... easy to set up, but it does not actually work for any printer I am connected to.
Info so far:
Found an older post from 2002 ... "Make a custom page"
Mac Help has a limited, simple, incomplete answer: "Make a custom page"
Tried three printers. One Postscript Level 3 One Level 2 and one non postscript
Switching between page types in the drop down shows a change in the print preview, and the floating information shows the correct page size and larger left margin... but the "Custom Page Size" does not show a larger left margin, in the preview, no mater how it is set.
There also appear to be a relation ship between the radio Buttons for scale and the margin settings.
Test prints have simply cut off the left side of the document, and scaled the document from the right side in and the top down.
Printing a PDF from Preview
MacBook Pro
OSX 10.5.6
Thanks
Peter

Thanks ... tried the Paper Handling, but no lock.
Based on the fact that any scaling, "moves" the image down and to the left on the paper ...
Th only "work around" solution is to ...
Rotate the PDF page 180, then scale slightly (90% or so ...)
This pushes the upside down page, down and to the left.
While this is the opposite of what is desired, the print is then correct when
it is punched and placed into a three ring binder.
Assumption is the application that creates the documnt, needs to have the paper margins set. The reality is, an application like Preview, that does not "create anything", needs to handle existing documents PDF, JPEG and print to Custom Page configurations.
ie: In Preview, Custom Page does not work correctly,
Thanks allfor the comments and help ...

How Can I print Oracle Report 9i directly To Printer on the local network?

Dear All;
How Can I print Oracle Report 9i directly To Printer on the local network?
or to any other computer ? or to my default printer without prevoiues know the printer name i mean found it in my connected printer?
plear help me?
Best Wishes

1. Check documentation for DESNAME and DESTYPE
2. See 1 as long as they are a shared resource
3. Think you must know the name, but please check or documentation
Regards,
Martin
PS. There's a Reports Forum here which would be a better option for posting this question

HOW TO DEVELOP AN INTERACTIVE REPORT

HI,
     How to Develop an interactive report to display sales orders for particular customer, items for particular order.

Hi,
Look at the below sample Program for the Interactive ALV report.
*& Report Z_INTERACTIVE_ALV3                                          *
report z_interactive_alv4    no standard page heading line-size 650
message-id zz_9838                      .
type-pools: slis.
*type declaration for values from ekko
types: begin of i_ekko,
       ebeln like ekko-ebeln,
       aedat like ekko-aedat,
       bukrs like ekko-bukrs,
       bsart like ekko-bsart,
       lifnr like ekko-lifnr,
       end of i_ekko.
data: it_ekko type standard table of i_ekko initial size 0,
      wa_ekko type i_ekko.
*type declaration for values from ekpo
types: begin of i_ekpo,
       ebeln like ekpo-ebeln,
       ebelp like ekpo-ebelp,
       matnr like ekpo-matnr,
       menge like ekpo-menge,
       meins like ekpo-meins,
       netpr like ekpo-netpr,
       end of i_ekpo.
data: it_ekpo type standard table of i_ekpo initial size 0,
      wa_ekpo type i_ekpo .
*variable for Report ID
data: v_repid like sy-repid .
*declaration for fieldcatalog
data: i_fieldcat type slis_t_fieldcat_alv,
      wa_fieldcat type slis_fieldcat_alv.
data: it_listheader type slis_t_listheader.
declaration for events table where user comand or set PF status will
be defined
data: v_events type slis_t_event,
      wa_event type slis_alv_event.
declartion for layout
data: alv_layout type slis_layout_alv.
declaration for variant(type of display we want)
data: i_variant type disvariant,
      i_variant1 type disvariant,
      i_save(1) type c.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
data: i_title_ekko type lvc_title value 'FIRST LIST DISPLAYED'.
data: i_title_ekpo type lvc_title value 'SECONDRY LIST DISPLAYED'.
initialization.
v_repid = sy-repid.
perform build_fieldcatlog.
perform event_call.
perform populate_event.
start-of-selection.
perform data_retrieval.
perform build_listheader using it_listheader.
perform display_alv_report.
*&      Form BUILD_FIELDCATLOG
      Fieldcatalog has all the field details from ekko
form build_fieldcatlog.
wa_fieldcat-tabname = 'IT_EKKO'.
wa_fieldcat-fieldname = 'EBELN'.
wa_fieldcat-seltext_m = 'PO NO.'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'IT_EKKO'.
wa_fieldcat-fieldname = 'AEDAT'.
wa_fieldcat-seltext_m = 'DATE.'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'IT_EKKO'.
wa_fieldcat-fieldname = 'BUKRS'.
wa_fieldcat-seltext_m = 'COMPANY CODE'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'IT_EKKO'.
wa_fieldcat-fieldname = 'BUKRS'.
wa_fieldcat-seltext_m = 'DOCMENT TYPE'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'IT_EKKO'.
wa_fieldcat-fieldname = 'LIFNR'.
wa_fieldcat-no_out    = 'X'.
wa_fieldcat-seltext_m = 'VENDOR CODE'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
endform.                    "BUILD_FIELDCATLOG
*&      Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
form event_call.
call function 'REUSE_ALV_EVENTS_GET'
   exporting
     i_list_type           = 0
   importing
     et_events             = v_events
EXCEPTIONS
   LIST_TYPE_WRONG       = 1
   OTHERS                = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    "EVENT_CALL
*&      Form POPULATE_EVENT
     Events populated for TOP OF PAGE & USER COMAND
form populate_event.
read table v_events into wa_event with key name = 'TOP_OF_PAGE'.
if sy-subrc eq 0.
    wa_event-form = 'TOP_OF_PAGE'.
    modify v_events from wa_event transporting form where name =
wa_event-form.
endif.
read table v_events into wa_event with key name = 'USER_COMMAND'.
if sy-subrc eq 0.
    wa_event-form = 'USER_COMMAND'.
    modify v_events from wa_event transporting form where name =
wa_event-name.
endif.
endform.                    "POPULATE_EVENT
*&      Form data_retrieval
retreiving values from the database table ekko
form data_retrieval.
select ebeln aedat bukrs bsart lifnr from ekko into table it_ekko.
endform.                    "data_retrieval
*&      Form bUild_listheader
      text
     -->I_LISTHEADEtext
form build_listheader using i_listheader type slis_t_listheader.
data hline type slis_listheader.
hline-info = 'this is my first alv pgm'.
hline-typ = 'H'.
endform.                    "build_listheader
*&      Form display_alv_report
      text
form display_alv_report.
v_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
   exporting
     i_callback_program                = v_repid
I_CALLBACK_PF_STATUS_SET          = ' '
     i_callback_user_command           = 'USER_COMMAND'
     i_callback_top_of_page            = 'TOP_OF_PAGE'
     i_grid_title                      = i_title_ekko
I_GRID_SETTINGS                   =
IS_LAYOUT                         = ALV_LAYOUT
     it_fieldcat                       = i_fieldcat[]
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
    i_default                         = 'ZLAY1'
     i_save                            = 'A'
    is_variant                        = i_variant
     it_events                         = v_events
    tables
      t_outtab                          = it_ekko
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    "display_alv_report
*&      Form TOP_OF_PAGE
      text
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
      it_list_commentary       = it_listheader
   i_logo                   =
   I_END_OF_LIST_GRID       =
endform.                    "TOP_OF_PAGE
*&      Form USER_COMMAND
      text
     -->R_UCOMM    text
     -->,          text
     -->RS_SLEFIELDtext
form user_command using r_ucomm like sy-ucomm
rs_selfield type slis_selfield.
case r_ucomm.
    when '&IC1'.
      read table it_ekko into wa_ekko index rs_selfield-tabindex.
      perform build_fieldcatlog_ekpo.
      perform event_call_ekpo.
      perform populate_event_ekpo.
      perform data_retrieval_ekpo.
      perform build_listheader_ekpo using it_listheader.
      perform display_alv_ekpo.
endcase.
endform.                    "user_command
*&      Form BUILD_FIELDCATLOG_EKPO
      text
form build_fieldcatlog_ekpo.
wa_fieldcat-tabname = 'IT_EKPO'.
wa_fieldcat-fieldname = 'EBELN'.
wa_fieldcat-seltext_m = 'PO NO.'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'IT_EKPO'.
wa_fieldcat-fieldname = 'EBELP'.
wa_fieldcat-seltext_m = 'LINE NO'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'I_EKPO'.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-seltext_m = 'MATERIAL NO.'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'I_EKPO'.
wa_fieldcat-fieldname = 'MENGE'.
wa_fieldcat-seltext_m = 'QUANTITY'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'I_EKPO'.
wa_fieldcat-fieldname = 'MEINS'.
wa_fieldcat-seltext_m = 'UOM'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'I_EKPO'.
wa_fieldcat-fieldname = 'NETPR'.
wa_fieldcat-seltext_m = 'PRICE'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
endform.                    "BUILD_FIELDCATLOG_EKPO
*&      Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
form event_call_ekpo.
call function 'REUSE_ALV_EVENTS_GET'
   exporting
     i_list_type           = 0
   importing
     et_events             = v_events
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    "event_call_ekpo
*&      Form POPULATE_EVENT
       Events populated for TOP OF PAGE & USER COMAND
form populate_event_ekpo.
read table v_events into wa_event with key name = 'TOP_OF_PAGE'.
if sy-subrc eq 0.
    wa_event-form = 'TOP_OF_PAGE'.
    modify v_events from wa_event transporting form where name =
wa_event-form.
endif.
endform.                    "POPULATE_EVENT
*&      Form TOP_OF_PAGE
      text
form f_top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
      it_list_commentary       = it_listheader
   i_logo                   =
   I_END_OF_LIST_GRID       =
endform.                    "TOP_OF_PAGE
*&      Form USER_COMMAND
      text
     -->R_UCOMM    text
     -->,          text
     -->RS_SLEFIELDtext
*retreiving values from the database table ekko
form data_retrieval_ekpo.
select ebeln ebelp matnr menge meins netpr from ekpo into table it_ekpo.
endform.
form build_listheader_ekpo using i_listheader type slis_t_listheader.
data: hline1 type slis_listheader.
hline1-typ = 'H'.
hline1-info = 'CHECKING PGM'.
endform.
form display_alv_ekpo.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
   i_callback_program                = v_repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = 'F_USER_COMMAND'
   i_callback_top_of_page            = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
   i_grid_title                      = i_title_ekpo
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
   it_fieldcat                       = i_fieldcat[]
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         =
   i_save                            = 'A'
IS_VARIANT                        =
   it_events                         = v_events
tables
    t_outtab                          = it_ekpo
exceptions
   program_error                     = 1
   others                            = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.
Regards,
Ram
Reward points if helpful

How to Develop the ABAP Reports in Business One

HI all;
am New to SAP Business One,
How to Develop the Z Reports in Business One ? like Normal ALV Reports and other??
Can we have the ABAP Editor and Other Transaction in Business One.
-Ravi

Hi Sharma,
Thanks for Your Replay,
This is what my requirement !.
Hi Experts,
Here we are integrating SAP Business One with 3rd Party tool. !!
We need to Develop Customize Report in Business one and These Reports Out Put Will Convert into XML Files (Third Party System Can Understand Only XML files) and stored in Application Server/ Presentation Server.
How to Develop the u2018Z/Yu2019 Reports in Business one ? Can we use SE38 (R/3 ABAP Editor and other T-codes) in Business One.? Or is there any tools to develop the Business One Reports ? How to Convert the Report out put into XML File?
Thanks,
Upender.

How can I print a report twice?

Hi,
I4m trying to print a report twice in the same paper, landscape style. Someone know how can I do it?
Thanks
Veronica

There is a system parameter called "copies", set it to two.

How do I print multiple reports to a directory at the same time

I'm trying to print a list of monthly reports to a directory by using the code below. The first part of the code runs a query to select Business Units that will receive the reports. The idea is to cycle through this list and print one report for each
Business Unit. These vary from month to month. I create a record set from that query. Where I'm getting stuck is in trying to pass the Business unit selected in the first query to the query that runs the final report. I end up getting multiple
reports with different titles but the content is the same, so I'm doing something incorrect. Here is the code. Any help would be greatly appreciated. QryNewMOR runs the report.
Private Sub Cmd012815_Click()
    Dim qdf As DAO.QueryDef
    Dim strSQL As String
    Dim strPathName As String
    Dim blRet As Boolean
    Dim rs As DAO.Recordset
    Dim stDocName As String
    Dim strSavedSQL As String
    Dim strBus As String
    Dim strExec As String
    If Me.Dirty Then Me.Dirty = False
    stDocName = "RptNewMOR"
    strSQL = "SELECT [Business Unit Long],[Responsible Executive] FROM tblRespExec WHERE (((tblRespExec.SelectedPrint)=True));"
    Set rs = CurrentDb.OpenRecordset(strSQL)
    If rs.RecordCount < 1 Then
        MsgBox "No Bus lines or Execs selected", vbCritical, "Error"
        Exit Sub
    End If
   'CreateFolder "C:\Test MOR"
    'store the current SQL
    Set qdf = CurrentDb.QueryDefs("QryNewMOR")
    strSavedSQL = qdf.SQL
    qdf.Close
    Set qdf = Nothing
Do
    strBus = rs![Business Unit Long]
    strExec = rs![Responsible Executive]
    Set qdf = CurrentDb.QueryDefs("QryNewMOR")
   strSQL = strSQL + Left(strSavedSQL, InStr(strSavedSQL, ";") - 1) & " and (qryNewMOR.[Draft Distribution List]=" & rs![Responsible Executive] & ");"
    strSQL = strSavedSQL
    qdf.SQL = strSQL
    Debug.Print strSQL
    qdf.Close
    Set qdf = Nothing
    strPathName = "C:\Test MOR\" & rs![Business Unit Long] & ".pdf"
    DoCmd.OutputTo acOutputReport, stDocName, acFormatPDF, strPathName
    rs.MoveNext
Loop Until rs.EOF
rs.Close
Set rs = Nothing
'restore the SQL
Set qdf = CurrentDb.QueryDefs("QryNewMOR")
qdf.SQL = strSavedSQL
qdf.Close
Set qdf = Nothing
End Sub
Dean J. Waring

I'm trying to figure out how to combine the two and am obviously not succeeding. Do you have a suggestion on how to make that work?
Hi Dean,
I am not completely sure of what you want. I suppose you want to modify the SQL definition of QryNewMOR, and use that modified query for the report?
In that case, and in the line of your program, I would make a QueryDef: QryStdMOR, with the "standard" strSavedSQL (so: strSavedSQL =  QryStdMOR), construct strSQL in the same way, and assign this to the SQL definition of QryNewMOR.
Thus, in your code at the very beginning, skip the line strSQL = strSavedSQL.
strSQL = Left(strSavedSQL, InStr(strSavedSQL, ";") - 1) & " and (qryNewMOR.[Draft Distribution List]=""" & rs![Responsible Executive] & """);"
' skip this line: strSQL = strSavedSQL
qdf.SQL = strSQL
Within the loop you should not start with strSQL = strSQL & ...., because strSQL will retain then its value from the previous loop, and increases and increases...
Finally, I have added some double doublequotes around rs![Resposible Executive], because string expressions must be enclosed by double doublequotes (or eventually a single singlequote).
Imb.
strSQL = strSQL + Left(strSavedSQL, InStr(strSavedSQL, ";") - 1) & " and (qryNewMOR.[Draft Distribution List]=" & rs![Responsible Executive] & ");"
    strSQL = strSavedSQL
    qdf.SQL = strSQL

How Can I print my report through character mode using DOS, very very urgent

Hi all
I would like to print my reports instead of from windows based, I want to print through DOS mode. While giving dos mode printouts report builder is hanging and comming out. Any help will be appreciated.
Thanks
Reddy

Hi Reddy,
Here is the solution.
At Dos\> ORACLE_HOME\BIN\RWRUN60 <followed by the report name and desired arguments >
srini

How Do I Print my reports Horizontally using Coldfusion Report Builder

Hi-
I want to print my reports Horizontally rather vertically using Coldfusion Report Builder. I am using a very simple query
SELECT
      Zones.Zone_id,
      Zones.Zone_name,
     Count(employees.cnic) as Employees
FROM Zones, Employees
WHERE Zones.zone_id=Employees.zone_id
GROUP BY Zones.zone_name
Or say Daily/Monthly Zone Sale with Zones in Rows and Dates/Months in Columns
Thanks
Tayyab Hussain

Have a look at my response to your post in the Report Builder sub-forum.

How to select printer for reports 11g?

I just upgraded my forms and reports from 6i to 11g, before printing the reports to printer,
I was using
WIN_API_DIALOG.select_printer(:DESNAME,:PORT,FALSE);to get printer name from network and set :DESNAME.
This didn't work in 11g, what's the alternative function to perform this ?

frank1018 wrote:
I just upgraded my forms and reports from 6i to 11g, before printing the reports to printer,
I was using
WIN_API_DIALOG.select_printer(:DESNAME,:PORT,FALSE);to get printer name from network and set :DESNAME.
This didn't work in 11g, what's the alternative function to perform this ?Hello Frank,
Check this Oracle reports 10g output directly to printer
Hope this works..
Hamid

How do I print a report exported to Crystal format

I have CR.NET 9. I would like to export a report to the Crystal format, then later have another app print it. How do I do that?
Thanks
Craig

Look at the sample wiki referenced in my original post. There is a pringing sample there - web, win, C# and VB...
Also, [this|http://www.businessobjects.com/global/pdf/dev_zone/VS2005_Walkthroughs.pdf] article has hte info you are looking for (the title says VS2005, but the prionting is identical in any version of .NET).
Ludek

How instal developer (forms and reports ) on Apple Mac

I want to install oracle 6i forms and report on Apple Mac note book. how i and where i can download developer installer for MAC OS.
Thanks

Apple Mac is not a suitable platform to install oracle products. You can take a look at the Oracle Certify Matrix and you can build up your own conclusions.
In this case, use your Apple Mac for documentation, get a Microsoft Windows Based platform, and choose a certified platform.
~ Madrid
http://hrivera99.blogspot.com/

How to mass print a report with multiple queries?

Dear All,
i want to precalclate a report (which includes 4 queries) to pdf for printing. Because i have to print it for all profitcenter (~200), i want to use the filter navigation.
Because this isn't possible for reports, i inserted my report using a report item to a web template.
When i call the web template direct, everything works fine, but if i precalculate the web template using the bex broadcaster, only one query is parameterized. The second one seems to use the global variant (the sum of all profitcenter).
Any Idea? Do i have to change an export web template and add some data provider? I am not absolutely sure which is the right export template for an report in a web template...
Thanks in advance,
Thomas

Hey all,
nobody an idea of a possible approach.
Greetz,
Thomas

How can I make a JTable wider than the cumulation of its columns??

I have a JTable that overrides tableChanged to modify its size based on how many rows and columns it has and adding 16 pixels. Everything works great with adding 16 pixels to the bottom of my table, but when I try to add 16 pixels to the right side, the columns grow to fill the space even though I have AUTO_RESIZE_OFF.
I want there to be 16 pixels between the edge of my last column and the edge of the scroll pane when I have scrolled all the way to the right.
Does anybody know how to do this?? I have been messing with it for hours!
Tonya
P.S. Here is the code so far:
     class AlgoResultsSpreadsheetTable extends JTable {
          AlgoResultsSpreadsheetTable() {
               super();
               setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
               setOpaque(false);
          public void tableChanged(TableModelEvent e) {
               super.tableChanged(e);
               setMinimumSize(new Dimension((getColumnCount() * 75) + 16,
                         (getRowCount() + 1) * 16));
               setPreferredSize(new Dimension((getColumnCount() * 75) + 16,
                         (getRowCount() + 1) * 16));
               JTableHeader header = getTableHeader();
               header.setPreferredSize(
                         new Dimension((getColumnCount() * 75) + 16, 200));
     }

Nevermind... I just figured it out:
               Enumeration<TableColumn> enu = getColumnModel().getColumns();
               while (enu.hasMoreElements()) {
                    TableColumn column = enu.nextElement();
                    column.setPreferredWidth(75);
                    column.setMaxWidth(75);
                    column.setResizable(false);
               }

How to develop/print a report wider than 8.5 inches, why cant we landscape

Similar Messages

Maybe you are looking for