How to Disable DMS in Oracle App Server

We are doing some tests for which we need to disable DMS. How can we do that in Oracle App Server. One of the FAQs on oracle's site says that we need to set "Doracle.dms.console.DMSConsole" property value to "racle.dms.instrument_stub.DMSConsole". But when I do that I get a ClassNotFoundException. Any clues?Pointers?

Have you read section "Setting the OC4J DMS Sensors Option", chapter 6 "Setting the OC4J DMS Sensors Option", book "Oracle® Application Server Performance Guide, 10g Release 2 (10.1.2), Part No. B14001-01"? or similar section of the release you are using?
Please note most, if not all, oracle documentation books are available starting from the first google hit of "oracle documentation".

Similar Messages

How to disable or rename Oracle Report Server servlet command?

Hi,
I'm using Oracle9i App Server R2.
I would like to learn how to disable or rename Oracle Report Server's servlet command?
This is to avoid user from accessing http://myserver/reports/rwservlet/showmap to view the key map file content.
Please advise.

or example, my report server was rep_appserver, then i want to rename it to rep_test.
Here some step to accomplish it,
1. stop mid-tier
$ORACLE_HOME\opmn\bin\opmnctl stopall
2. stop em website
$ORACLE_HOME\bin\emctl stop iasconsole
3. rename $ORACLE_HOME\reports\conf\rep_<old_report_server_name>.conf to something else or delete it
4. rename $ORACLE_HOME\reports\server\rep_<old_report_server_name>.dat to something else or delete it
5. edit $ORACLE_HOME\reports\conf\rwservlet.properties file then change the SERVER parameter to new report server name(remember this new name has to be a unique name)
6. create a backup copy of the $ORACLE_HOME\sysman\emd\targets.xml file
7. open $ORACLE_HOME\sysman\emd\targets.xml, find old report server name and then replace it to new report server name
8. save new targets.xml file
9. open $ORACLE_HOME\opmn\conf\opmn.xml, old report server name and then replace it to new report server name
10. start em website
$ORACLE_HOME\bin\emctl start iasconsole
11. start mid-tier
$ORACLE_HOME\opmn\bin\opmnctl startall
HTH
Amkotz

How to Create a DataSource to DB2 in Oracle App Server 10g

Dear All
I have to connect to DB2 from Oracle Application Server 10g.
If anyone knows how to connect to DB2 from Oracle App Server 10g.
Pls advice me..
With Regards
Suresh

Hi,
Once u created a data source. go to respective application component which u have assigned ducring creatinon of DS in RSO2 and right click on it and use replicate metadata.
a popup with options 1. as data source
2. as 3.x data source will come u select 2 one here and go on.

How do I disable SSLV3 in Oracle HTTP SERVER to prevent POODLE attacks?

How do I disable SSLV3 in Oracle HTTP SERVER to prevent POODLE attacks?
I see the line in the ssl.conf file:
SSLCipherSuite SSL_RSA_WITH_RC4_128_MD5:SSL_RSA_WITH_RC4_128_SHA:SSL_RSA_WITH_3DES_EDE_CBC_SHA:SSL_RSA_WITH_DES_CBC_SHA:SSL_RSA_EXPORT_WITH_RC4_40_MD5:SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
but I'm not sure which ciphers are SSLV3.
Thanks,
Andy

Hi Andy,
For this, we highly recommend you to open a SR with Oracle support and Security team would be assisting you on how to get this fixed.
Thanks,
Sharmela

How to displays the standard open file dialog box in Oracle Apps Server

Hi,
I am having a form, where i am opening a file and putting that file content in a text box.
This is my code written in WHEN-BUTTON-PRESSED trigger:
declare
in_file Text_IO.File_Type;
linebuf VARCHAR2(8000);
filename VARCHAR2(30);
BEGIN
filename:=GET_FILE_NAME('d:\Rajesh\Practice', File_Filter=>'Text Files (*.txt)|*.txt|',select_file=>false);
in_file := Text_IO.Fopen(filename, 'r');
LOOP
Text_IO.Get_Line(in_file, linebuf);
:text_item5:=substr(:text_item5||linebuf||chr(10),1,5000);
END LOOP;
EXCEPTION
WHEN no_data_found THEN
Text_IO.Put_Line('Closing the file...');
Text_IO.Fclose(in_file);
END;
I have posted this in ORacle Apps Server.Where i was not able to get the Open Dialoq Box.It is giving an error as
"FRM-40735:WHEN-BUTTON-PRESSED trigger raised unhandled exception ORA-302000.".
I think the GET_FILE_NAME function is not supported in the Apps Server.
Is there any alternative solution for getting the OPEN DIALOG WINDOW in Oracle Apps Server?
Pls let me know.

Hi!
waldemar.hersacher wrote:
"It seems that the VIs called by the clients are running in the user interface thread.
A call to the file dialog box will call a modal system dialog. So LV can't go on executing VIs in the user interface thread."
Are you sure? I think, that File Dialog, called by LabVIEW File Dialog from Advanced File Functions Palette doesn't blocking any cycles in subVI, which running in UI Thread. Look in my old example (that was prepared for other topic, but may be good for this topic too).
2 linus:
I think, you must a little bit reorganize you application for to do this. You must put your File Dialog into separated cycle. This cycle, of course, will be blocked when File Dialog appear on the screen. But other cy
cle, which responsible for visualization will run continuosly at the same time...
Attachments:
no_block_with_file_open_dialog.zip ‏42 KB

Standalone webcache or Web cache from Oracle Apps Server 10.1.2.0.2?

Hi
I am installing web cache on two servers in web tier and J2EE server (with OHS) on another two servers in apps tier. Should I use standalone webcache or install from Oracle Apps Server package? If I choose Oracle Apps Server package, I have to disable Home, HTTP components. But it is DCM managed. Any suggestions?
And should I deploy my OHS servers on web cache servers in the web tier? In future we want to expand J2EE installation, we will deploy Portal with SSO, OID etc.
Regards
Shen Jie

Shen Jie,
Please review the Enterprise Deployment to see what are the best architectures.
Hope this helps.
Deepak

How to Disable SSLv2 in Oracle IAS 10.1.3

How to disable SSLV2 in Oracle IAS 10.1.3.. I added below in ssl.conf file.. But it is not working...
SSLProtocol -ALL SSLv3 TLSv1
SSLCipherSuite ALL:!aNULL:!ADH:!eNULL:!LOW:!EXP:RC4+RSA:+HIGH:+MEDIUM
Thanks
Lalitha

How can you have WebCache if you are using 10.1.3 version?
The cause of this problem has been identified and verified in an unpublished Bug 4761833 : "IE FAILS TO TO CONNECT TO WEBCACHE VIA SSL IF SSLV2.0 IS NOT SELECTED".
By default Webcache sets its SSL_ENABLED parameter in webcache.xml to: SSLV3_V2H
This supports only SSL V2.0 and SSLV3.0 and not TLSV1.0
When IE makes a connection with: SSL V2.0, SSLV3.0, TLSV1.0 all checked, an Ethereal sniff shows:
SSLV2 Client Hello
SSLV3 Server Hello
When IE makes a connection with: SSLV3.0, TLSV1.0 checked, SSL v2.0 unchecked, an Ethereal sniff shows:
TLSV1 Client Hello
SSLV3 Alert (Level: Fatal, Description: Unexpected Message)
When Firefox makes a connection with SSLV3.0, TLSV1.0 checked, SSL v2.0 unchecked an Ethereal
sniff shows:
SSLV2 Client Hello
SSLV3 Server Hello
So even though SSLV2.0 is unchecked it still makes the initial Client Hello via SSLV2.0 hence why Mozilla works
The reason why IE fails when SSLV2.0 is unchecked is because IE always uses what it considers to be the best Protocol and picks TLSV1.0, and as the default SSL_ENABLED parameter in Webcache does not support TLS V1.0, then it fails.
Solution
To implement the solution, execute the following steps:
1. Edit the $ORACLE_HOME/webcache/webcache.xml
For the SSL Listen entry e.g:
<LISTEN IPADDR="ANY" PORT="443" SSLENABLED="SSLV3_V2H" PORTTYPE="NORM">
Change:
"SSLV3_V2H"
to
"SSL"
2. Save the file and restart webcache, and then test you can access Webcache via SSL with SSLV2.0 unchecked
Hope this helps
Regards.

Can I use Oracle app server with mysql

Can I use Oracle app server with mysql. I seem to have the following error when trying to create a datastore. I have mysql.jar in my classpath. Can any one tell me what's wrong.
Error initializing data-source 'jdbc/topup': DriverManagerDataSource driver 'org.gjt.mm.mysql.Driver' not found

Yes you can forward requests from your own apache to the iAS. This can be done using mod_proxy. Some hints about how to do this are availlable on this forum.
mod_oc4j is not a standard apache module, and therefore is not availlable when you download apache. There is no apparent reason to use mod_oc4j on a "regular" webserver (unless you want to build your own iAS). Also there might be some licenseing issues with using mod_oc4j module on a standard apache.
You can encrypt data that is passed from a random Apache to you iAS.

Process Modelling in Aris, generating BPEL & deployment to Oracle App Serve

Hi
We are considering using Aris to model some business process and using its functionality to generate BPEL for its deployment onto a Service Oriented Architecture i.e. Oracle App Server with BPEL Process Manager. Has anyone had any specific exposure to Aris and its BPEL deployment onto the Oracle App Server.
- Is there an approach (methodology) from previous experience that someone can recommend.
- How seamless/complex is the generation and deployment of the BPEL onto the Oracle BPEL Process Manager.
- Are there any issues or lessons learnt from people using Aris to generate BPEL to the Oracle BPEL Process Manager?
thanks

Hi,
I am dealing with the same problems. I did already some testings using the EPCs of ARIS and tried to establish the link with the BPEL Process Manager. Still it doesn't work seamlessly, maybe with the new realease of ARIS the link will be possible. I am not aware of any methodology in that context, it means we need to develop one.
Looking forward to hearing from you.
Best regards,
TMT

Does Oracle App Server 10.1.3.1 support global transactions?

I'm asking because it seems it doesn't. My stateless EJB calls an EJB in another application server, but the transaction is not propagated. Why is that?
Does it matter which inittial context factory or which TransactionalObject?
Do the different application server vendors (Oracle, Websphere ect.) support global transactions between each other?
I cannot find anything about this in the Oracle App server documentation.
Can anyone help?

Hello,
Yes i should be possible to do.
Have you look at the OC4J transaction propagation that used the OracleAS transaction manager?
- How to list.
This will help you to configure properly your application.
Documentation:
- Data source and Global Transactions (XA)
- How do You Participate in a Global or Two-Phase Commit (2PC) Transaction?
- Configuring Transaction Service
Hope that helps...
Regards
Tugdual Grall

Changes in webservices while migrating from Oracle App Server to WebLogic

Dear All,
I am developing webservices for a external users.
I am new to webservices.
We were using Oracle Application server to deploy the webservices.
The architecture was as mentioned below
1) A interface class
2) A Implementation class for the above interface class
Now we are planning to migrate from Oracle application server to Weblogic Application server.
I have few doubts about the migration,
1) Will there be any difference between Oracle specific WSDL and WSDL created by Weblogic ant build command
2) As our external parties are referring our SOAP requests ans responses for their implementation, i am concerned about the changes in the SOAP request and response formats. Will there be changes due to application server change?
Oracle app server - Oracle 10g application server version 9.0.4.0
Weblogic appl server - Weblogic application server version 10.3.0.0

Now after creating the WSDL by Weblogic workshop. The previous request XML is not working.
Can someone help soving the below query.
We are in process of upgrading the Oracle 10g application server version 9.0.4.0 to Weblogic application server version 10.3.0.0. In the old application server we were using axis specific jars to create the WSDL for the webservices. There are so many third party applications which are accessing our webservices, so we can not change the wsdl, clients accessiong the webservices and the corresponding formats of request and response xml messages. So we need to deploy the same wsdl and for the same we need to deploy axis on to weblogic 10.3. Can you please help us regarding the same.
Qns
1 - If we can deploy the axis on to the Weblogic 10.3
2 - Can we use the same WSDL in the Weblogic server too.
3 - If we use the same WSDL, will it help us to keep the client accessing the webservices, the request xml format, response XML format the same as it is with Oracle 10g application server case.
4 - Please share how to deploy axis on to the Weblogic 10.3 application server.
5 - Please share how we can create EARs that can be deployed on the webserver using axis specific jars.
Thanks and Regards
Manoj

URGENT: Deployment of ADF UIX application to Oracle App Server 10g

Hi,
Please let me know of documentation of how to deploy an ADF UIX application developed using Jdeveloper9.0.5.2 to Oracle Application Server 10g.
I have already created an WAR and EAR deployment profile. and also an ORacle APp server connection from the connections tab in Jdeveloper.
Thanks a lot.

Have a look at the JDeveloper online help (F1) there is a complete chapter about deploying:
http://helponline.oracle.com/jdeveloper/help/state/content/destination.2%7E9%7E1%7E6%7E/navSetId.jdeveloper/oldNavId.0/navId.0/oldNavSetId.jdeveloper/
Basically you need to deploy the ADF runtime libraries (use the ADF Runtime Installer), and then deploy your WAR.

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
bash-3.00$ ./irca.sh
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
Please verify that the ORACLE_HOME is set correctly.
bash-3.00$

Hi Craig,
Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
Section :- Oracle Application Server 10g Release 3 (10.1.3)
Regards,
Praaksh.

Oracle App Server error

hi all,
I am tried to create new OC4J instance from App Server Control. Now OPMN is not starting. I get following error
iguration information
Running in C:\product\10.1.3.1\OracleAS_1
Operation mode:Startup, App Server, No Enterprise Manager, Single Instance
Oracle home:C:\product\10.1.3.1\OracleAS_1
Oracle home name:Unnamed
Instance name:oracleAS.psmtech
Instance type:allProducts
Version:10.1.3.1.0
Uses infrastructure:false
Not an infrastructure instance, no infrastructure information available
Components:[j2ee, orabpel, oraesb, owsm, Wsil]
2007-05-17 04:45:19.328--Begin log output for Mid-tier services (oracleAS.psmtech)
2007-05-17 04:45:19.328--Processing Step: starting OPMN
2007-05-17 04:49:35.921--End log output for Mid-tier services (oracleAS.psmtech)
OPMN has thrown an unknown exception
oracle.appserver.startupconsole.model.ConsoleException: OPMN has thrown an unknown exception
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:108)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.ias.opmn.optic.OpticBadRequestException: Error starting opmn server: 2
     at oracle.ias.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:147)
     at oracle.ias.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:77)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:90)
     ... 6 more
Exception caused by
Error starting opmn server: 2
oracle.ias.opmn.optic.OpticBadRequestException: Error starting opmn server: 2
     at oracle.ias.opmn.optic.OpmnAdmin.executeCommand(OpmnAdmin.java:147)
     at oracle.ias.opmn.optic.OpmnAdmin.startOpmnServer(OpmnAdmin.java:77)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:90)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
I tried to validate opmn.xml file, shows following error
C:\product\10.1.3.1\OracleAS_1\opmn\bin>opmnctl validate opmn.xml
LPX-00202: could not open "opmn.xml" (error 200)
XML parse failed: error 202.
opmnctl: opmn validation failed!
we have Oracle App Server on Windows server 2003, new installation.
plz help me with this problem.

Not sure why you exeucute opmnctl validate, but
C:\product\10.1.3.1\OracleAS_1\opmn\bin>opmnctl validate opmn.xml
LPX-00202: could not open "opmn.xml" (error 200)opmn.xml isn't in $OH/opmn/bin directory. It's in $OH/opmn/conf.
This is quite difficult to debug from this forum. Check the logs in $OH/opmn/logs and see if that helps. Also try to shut everything down (and check that all processes are gone) and then try to restart.
Regards,
Martin

Oracle App Server 10.1.3.1 + Struts2 parameter map loss

hi,
I am facing an issue with oracle app server 10.1.3.1. With an application deployed in it, any .action hit seems to lose the parameter map. However, i m using Spring MVC with jasper reports for reporting purpose. So hitting a .report seems to go thru without the parameter map loss. I m using struts 2.0.11 in the application.
I have also tried the workaround related to struts.properties - (struts.dispatcher.parametersWorkaround = true). Did not help.
I wrote a CustomActionMapper which is an exact copy of DefaultActionMapper but for the addition of a few log statements to see the parameter map and uri.
I can notice the paramter map coming out empty even when data is posted or queryString with parameters sent.
Any leads on this truly appreciated.
Regards

hi,
I am facing an issue with oracle app server 10.1.3.1. With an application deployed in it, any .action hit seems to lose the parameter map. However, i m using Spring MVC with jasper reports for reporting purpose. So hitting a .report seems to go thru without the parameter map loss. I m using struts 2.0.11 in the application.
I have also tried the workaround related to struts.properties - (struts.dispatcher.parametersWorkaround = true). Did not help.
I wrote a CustomActionMapper which is an exact copy of DefaultActionMapper but for the addition of a few log statements to see the parameter map and uri.
I can notice the paramter map coming out empty even when data is posted or queryString with parameters sent.
Any leads on this truly appreciated.
Regards

How to Disable DMS in Oracle App Server

Similar Messages

Maybe you are looking for