How to disable the probe() routine when install a pseudo driver

I developed a very simple pseudo driver which does not control any hardware device. I just want to learn dynamic load a driver through the SUN Autoconfiguration method. When I run add_drv mydriver, I got the following error message
devfsadm: driver failed to attach: xlpd
This is because the probe() routine try to look for some hardware but it can not find it. So the question is how to disable this probe() routine so that this pseudo driver can be installed.

attach may fail also if you didn't provide a configuration file for your pseudo driver. Here is a sample for the xlpd pseudo driver:
<pre>
#ident "@(#)xlpd.conf 1.0 02/25/00"
name="xlpd" parent="pseudo";
</pre>
This file must be named xlpd.conf if your pseudo driver is named xlpd, and must be located in /usr/kernel/drv even if your pseudo driver is 64-bit.

Similar Messages

How to disable the reminding dialog when close the webi report viewer

Dear all
How to disable the reminding dialog when close the webi report viewer
Background
When user close the webi report viewer in inforview by click the button in the right-top of the webi report viewer frame. It always prompt a dialog to remind user that the modification will be lost without saving.
But customer need to disable this dialog, and can clost the report viewer directly.
So is there any ways to modify this?
I think it shoule modify some .js file under tomcat, but can not find the solution.
Thanks a lot, any information woulde be appreciated.
David Zhang

I've had the same issue bugging me since installing Snow, er, lion, er, cat, er, cougar, er, Mountain Lion. Incredibly ANNOYING.
It's stupid stuff like this and reverse scrolling that really turn long-timer users off. I'm personally glad Forstall got fired for blunders such as these.
I'm serious peeved that turning off iCloud Documents & Data actually deletes documents and data locally. That's just incredibly stupid.
MANY thanks mende1 for the answer on how to fix it.

How to disable the back button when displaying a form

Hi ,
i have form A calling form B, when form B is displayed i want to disable the
back button in the explorer so as not to allow the user from going back to
form A.
thanks.

When you open a new window, call following javascript function also to disable the "back" button.
window.history.forward(1);
It will work.

How to disable the open dialog when I open preview?

Hi,
I click on an PDF in the Finder.
Preview launches, opens my PDF AND OPENS A OPEN-DIALOG (iCloud) ?
Why? iCloud is nice, but things like that are annoying and I wish sometimes I can go back to Snow Leopard.
Is there a secret workaround to fix this?
Maybe a secret scew driver?
Many greetings to all!
rob

I've had the same issue bugging me since installing Snow, er, lion, er, cat, er, cougar, er, Mountain Lion. Incredibly ANNOYING.
It's stupid stuff like this and reverse scrolling that really turn long-timer users off. I'm personally glad Forstall got fired for blunders such as these.
I'm serious peeved that turning off iCloud Documents & Data actually deletes documents and data locally. That's just incredibly stupid.
MANY thanks mende1 for the answer on how to fix it.

How to fix the invalid signature when installing WebZap Extension for Photoshop CC?

The versions I am using are:
Adobe Extension Manager CC 7.1.1.32
Mac OS X 10.9.1
Here are screenshots for error message and preference setting:
Anyone have solution or workaround to this issue?
Thanks

I'm getting the same error with Adobe Extension Manager CC 7.1.1.32 when trying to install GuideGuide (guideguide.me) for Photoshop CC.
This is what was in the log file:
[Error] Fri Apr 25 14:12:54.588 2014 (/Volumes/Develop/jenkins_slave_all/workspace/ExMan_7.1.1_RIBS_Mac/ExManCoreLibrary/Mac/. ./Source/Util/SignatureValidator.cpp, 90) -CSignatureValidator::verifySignature: ZXPSign_verify() failed for "/var/folders/91/744_0jls50jg73cmhycyx5300000gn/T/tmp985baaaaa", sign_status is 52!
[Error] Fri Apr 25 14:12:54.588 2014 (/Volumes/Develop/jenkins_slave_all/workspace/ExMan_7.1.1_RIBS_Mac/ExManCoreLibrary/Mac/. ./Source/ExtensionBase.cpp, 164) -CExtensionManager::validateExtension: CSignatureValidator::verifySignature() failed for "/var/folders/91/744_0jls50jg73cmhycyx5300000gn/T/tmp985baaaaa", status is -402!
[Error] Fri Apr 25 14:12:54.588 2014 (/Volumes/Develop/jenkins_slave_all/workspace/ExMan_7.1.1_RIBS_Mac/ExManCoreLibrary/Mac/. ./Source/ExtensionBase.cpp, 600) -CExtensionBase::install: validateExtension() failed for zxp /Users/******/Desktop/guideguide-2.1.4.zxp, status = -402!

Mac OS6: How to disable the "Folder opens when hovering a file" thing

Ya know that Finder feature where you can drag an icon over a folder icon, then if you wait a moment, the folder will open up automatically? Is there a way to disable that annoying little feature?
Thank you-

Click on the desktop, go to the menu and choose Finder > Preferences. Under the General tab, turn off the check box for spring loaded folders.

How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID promts the previously used email user IDs... Want to disable this feature---How can ot be done ?

Question
How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID prompts the previously used email user IDs... Want to disable this feature---How can it be done ?

*Click the (empty) input field on the web page to open the drop down list
*Highlight an entry in the drop down list
*Press the Delete key (on Mac: Shift+Delete) to remove it.
*http://kb.mozillazine.org/Deleting_autocomplete_entries
* Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
* Tools > Options > Privacy > History: "Remember search and form history"
* https://support.mozilla.com/kb/Remembering+passwords
* https://support.mozilla.com/kb/Form+autocomplete

When i try to install snow leopard with install disk, it has me restart the computer instead of installing. can anyone help me figure out how to get the disk to actually install?

when i try to install snow leopard with install disk, it has me restart the computer instead of installing. can anyone help me figure out how to get the disk to actually install?

Ok, it's just a glitch that it's not auto-rebooting from the disk.
Please backup your personal files off the machine to a regualr external drive and disconnect all drives before doing anything
Take the 10.6 disk out and clean and polish the bottom with a very soft clean cloth and a tiny bit of rubbing alcohol to cut the oils.
Stick the disk in and reboot holding c key down, this will make it boot from the disk and you can install Snow Leopard that way.

How to automatically disable the wireless interface when the LAN interface is connected

Hi,
Is there a way to automatically disable the wireless interface when the LAN interface is connected on R61s and X61s?
Thank you!

Hi,
Thanks for the answer. I'm trying to deploy the profile that I've created on all my laptops. But i'm facing an issue for a while.
When the profile is deployed on a laptop, Access Connections finds a new ethernet port and asks to assign it a profile. But the problem is that Access Connection don't allow me to assign it to my wired profile, only to my wireless profile and that doesn't make sens to me. Besides, it is written in the dialogue box that ethernet profiles are disable for the match of the new port...
Is there any way to assign the new port to the new profile without human interaction or just how to make the wired profile available when access connection is launched and find a new ethernet connection
Thanks in advance!

How to disable the 2nd sound card when boot up

My laptop has two sound cards , both are hda-intel.
I want to disable the HDA nvidia when boot up ? And I hope this sound card can be enabled manually when necessary .
I that possible to do with acpi_call , or any method else ?
Sorry for my English
cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf1a00000 irq 45
1 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xf1000000 irq 17
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC665 Analog [ALC665 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0

You need to blacklist the card you do not want. How to do that is described here: https://wiki.archlinux.org/index.php/Ad … Sound_Card

How to disable the vibration feature for the Alarm?

How to disable the vibration feature for the Alarm?

Hi guys , because we have no answer to our issue how to take off the vibration when alarm is on , and our other profiles like ringtones, messages , reminders and so on we need to keep them on vibrate mode , the best solution is to install a free application from store called "alarmed " ; I did put it down on my phone and now i can use the alarm clock without any vibration at all ! That's the answer to our issue , before Apple is going to find a solution !
Personally , I don't think is going to be fix it soon , as long as the apple script made for pop ups is general one !
Good luck everyone

How to change the default JRE when there are several version of JRE in Sys

How to change the default JRE when there are several version of JRE in System?
i have installed j2sdk1.5.0 then installed j2ee1.4,then installed Weblogic6.1 which use jdk1.3
Now the JRE is jdk1.3\bin
When run class that was compiled with jdk1.5,throw:
java.lang.UnsupportedClassVersionError
How can i change the jre to 1.5?

There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
Excerpts from sun docs:
However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
Details are here
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
Will update if i find more information

How to disable the cancel button in the ProgressMonitor

hi,
I need to know, is there any way to disable/remove the (cancel)button in the ProgressMonitor?
One more problem is,
Once i click the cancel button, isCanceled() return true, how to make it false again so that the process continue....
It is very urgently.....
please help me out.
Thanks in advance.
Regards,
Deepa Raghuraman

I don't think that's a good solution, because Cancel button itself is not disabled, so user is tempted to click it and nothing happens.
A better but dangerous solution is this:
progressMonitor = new ProgressMonitor(ProgressMonitorDemo.this,
"Running a Long Task",
"", 0, 100);
progressMonitor.setMillisToDecideToPopup(0);
progressMonitor.setMillisToPopup(0);
progressMonitor.setProgress(0);
JDialog dialog = (JDialog)progressMonitor.getAccessibleContext().getAccessibleParent();
JOptionPane pane = (JOptionPane)dialog.getContentPane().getComponent(0);
pane.setOptions(new Object[]{});Refer to the same question here [http://stackoverflow.com/questions/512151/how-do-i-disable-the-cancel-button-when-using-javax-swing-progressmonitor] .

Facing Strange Problem in DIR HOW TO DISABLE THE RIGHT CLICK MOUSE IN THE DIRECTOR? (through parent script/ movie?)

Summary : HARD QUESTION : In the DIR file, the game runs well, right click = no effect. Coz I'm not making right click scripts. BUT in EXE file, right click = ERROR.
Explanation :
In the Adobe Director screen, this DIR file game is worked 100%.
I tested right click EVERYWHERE... NOTHING HAPPENS.
Because I don't make any programming with "on rightmouseup" or "on rightmousedown" command.
THEN, I published it into EXE...
I tested right click EVERYWHERE...I hoped the result will be the same as DIR tests....
WHEN I RIGHT CLICK IN THE AREA THAT'S GIVEN ON EXITFRAME ME, IT SHOWS ERROR, CHANGING PICTURES.....
this does not happened in the DIR file...
I didn't make a runmode program or anything else.... This is awkward... mystery for me...
WHY THERE'S A DIFFERENCE IN DIR and EXE... it should be exactly the same result.
I have used Director for years.... This is really strange for me...
>>>>>>>>HOW TO DISABLE THE RIGHT CLICK MOUSE IN THE DIRECTOR?
THIS ONE is useless.... It doesn't prevent the rightmouse click,...
      on rightmouseup me
             nothing
     end
      on rightmousedown me
             nothing
     end

Dear Adobe Forums friends
I need your help and guide through this problem...
In the game's dir file that is run on the DIRECTOR softwawre,
the game runs perfectly, I can do LEFT CLICKS (coz I programmed the script)
and when I do RIGHT CLICKS = there are no effect ( coz I don't do script for it)
LATER THIS GAME TURNED INTO EXE.
It supposed to run like the dir file as ABOVE. BUT STRANGELY, WHEN
I DO RIGHT CLICKS, it turns Error and showing as the picture attachment.
The right clicks that goes error are above the picture of numeric button only. (in DIR file
this run normal). I looked into the script behind the numeric button picture, there are only "on exitframe me", there are no script I made inside the "on exitframe me" that is triggering RIGHT CLICKS.
1. I wonder why there are differences in DIR and EXE effect
2. Why right click? Left click effects are all normal.
3. IS THERE ANY WAY TO DISABLE ALL RIGHT CLICKs since the beginning of EXE. So the game will be run normal. I don't need right clicks anyway, but whenever people do right click there will be ERROR.??
4. Is there any way to STOP THE MESSSAGE BOX TO APPEAR IN FRONT OF THE GAME? (I hate the Dirrector Error Message Box), or auto press OK.
NB: this game uses Buddy API Xtras, File IO Xtras.
Thx
David S

How to disable the X windows

I have install the solaris 8 in my PC. I prefer the comand line interface. But how to disable the X window?

dtconfig -d
(-e enables, -d disables)

How to disable the probe() routine when install a pseudo driver

Similar Messages

Maybe you are looking for