How to disable the screen of copyright at logon?

Hi,
How to disable the screen of copyright at logon?
"   SAP user name...............
     Last system logon...........
     Copyright(c) SAP AG 2002.
     All rights reserved.
      License expires on........... "
Vitalii.

HI,
As I know this is not possible, due to license agreement between SAP and DB vendors.
This popup should appear only frist logon and if you again logon with other language.
You can disable it but NOT recomended do change coding
screen 020 of SAPMSYST.
Ask you developers to check that.
Best regards,
Peter Nechala

Similar Messages

How to disable the Selection screens of LDB's ?

Hi,
How to disable the Selection screens of LDB's when we r using the predefined LDB for our executable pgm ? and how to include the predefined LDB can u write the Code for including LDb or if possible give an example of a Pgm using a Predefined LDB?
Thanks & Regards,
Gopi.

Hi Gopi,
Go through the link,
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Regards,
Azaz Ali.

How to disable the geotag NAG screen.

1. Is there a way to either to (ENABLE/DISABLE) geo-tagging permanently.
2. If YES, is there a way to disable the NAG question when taking pictures.

Hi,
In case you want to disable the screen elemnts/fields when one clicks on 'DISPLAY' then you have to do the following:
This should be written in PBO (Process before output).
LOOP AT SCREEN.
    IF screen-group1 = 'DIS'.
      screen-input = '0'.
      MODIFY SCREEN .
    ENDIF.
ENDLOOP.
This will disable the fields you want on your screen.
the fields that you want to disable should be put into a group say 'DIS'(screen-group1 as seen above) in SCREEN PAINTER.
Hope this helps.
Thanks,
Rashmi.

How to disable the inputfield using radio button dynamically in module pool

How to disable the inputfield on the screen using radio button dynamically in module pool.
Please suggest .
        Thanks.
Edited by: Lavanya YH1504 on Jul 30, 2010 1:20 PM

I got it thank you.
LOOP AT SCREEN.
    if screen-GROUP1 = 'LA1'.
       If RADIO1 = 'X'.
        SCREEN-INPUT = '0'.
        MODIFY SCREEN.
     ELSEIF RADIO2 = 'X'.
       screen-input = '1'.
      ENDIF.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
ENDMODULE.                 " STATUS_0100 OUTPUT
Edited by: Lavanya YH1504 on Jul 30, 2010 1:51 PM

How to Disable the Lead selection Action on aTable n How to Refreh a Page

HI....
1)How to Disable the Lead selection Action on aTable n How to Refreh a Page r web dynpro application.
In my case i have a table n user enters data on multiple rows in table , n i have some input fields outside of table for those Inputs fields am settiing the data at the screen initilization(in Init() moethod by hard code).the problem is whenever the is clicking in th 2nd row of a table the Lead Selection is triggerig and the data in the Input Fields outside the table is not displayinig.
So by removing the lead Selection Action of a table i thought i can reslove this,
2) How to refresha page(like we click F5 on key board),is it can be done thru code in web dynpro application
Regards
Rajesh

Hi,
You did not explained what is your functionality or coding in leadselection. Is that action on leadselection is necessary for you?.
1)If you just want to remove the action then go to table properties and remove the action for leadselection.
2)If you still want to continue with your leadselect action, then what you can do is.. write the code in leadselection action to again set the input fields which are out from table. That is what you did in your init method.
Page Refreshing
3) What do you mean by page refreshing? is that refreshing your table only or both the table and input fields.
What I understood is you are allowing the user to enter values in table and soon after pressing a button the values should be saved and the data in input fields shld be deleted. For this if you only invalidate the node then the user entered data will be lost.
So what you do is after getting the input data from the user add it to a ArrayList and then invalidate the node which clears the data in input field. Finally bind the Arraylist to your node. see the following code. This is a concept make changes according to your requirement
ArrayList list1=new ArrayList();
wdContext.nodeAbc().bind(list1);
IPrivateExcelviw.IAbcElement ele = wdContext.createAbcElement();
ele.setNo(wdContext.currentAbcElement().getNo());
ele.setName(wdContext.currentAbcElement().getName());
ele.setMarks(wdContext.currentAbcElement().getMarks());
list1.add(ele);
wdContext.nodeAbc().invalidate();
wdContext.nodeAbc().bind(list1);
Revert me if you have any doubts
Regards
Raghu
Edited by: Raghunandan Madarikuruva on Oct 16, 2008 8:07 AM

How to disable iMac screen and not to put it into sleep?!!!

I would like to play a movie on my iMac but to watch it on my LCD TV. How to disable iMac screen and not to put it into sleep. PLS have in mind that ctrl+shift+ eject does not work, it makes my iMac screen go black as well as the tv screen.So far, i have red many articles concerning this subject, but no one seems to have the right answer. I simply can´t believe that apple did not think of it, as it is nothing new ....
Thanks

My brother has eight cats, so your not along. Fortunetly his go outside.
I have been talking to the people over at macforums and they had some good thoughts. One guy suggested going analog and soldering in a rocker switch on the cable connecting a hub to the computer, turn off switch turns off keyboard and mouse.
I was prepared to try that but a great idea came along. Arch, you might be interested in this too. Buy a cheap (found one locally for $20) usb kvm switch that takes one usb keyboard and mouse and connects it to two pcs/macs and only connect one of the outs to my system. There is a button to switch between the two, so when I want to disable the keyboard and mouse, I just switch it to pc2, which is not connected to anything.
Cheap and easy solution. I wish I could of figured out how to do this with software, since there would be no money if it was freeware, but I guess you cant win them all.
Thanks everyone for chiming in!

Facing Strange Problem in DIR HOW TO DISABLE THE RIGHT CLICK MOUSE IN THE DIRECTOR? (through parent script/ movie?)

Summary : HARD QUESTION : In the DIR file, the game runs well, right click = no effect. Coz I'm not making right click scripts. BUT in EXE file, right click = ERROR.
Explanation :
In the Adobe Director screen, this DIR file game is worked 100%.
I tested right click EVERYWHERE... NOTHING HAPPENS.
Because I don't make any programming with "on rightmouseup" or "on rightmousedown" command.
THEN, I published it into EXE...
I tested right click EVERYWHERE...I hoped the result will be the same as DIR tests....
WHEN I RIGHT CLICK IN THE AREA THAT'S GIVEN ON EXITFRAME ME, IT SHOWS ERROR, CHANGING PICTURES.....
this does not happened in the DIR file...
I didn't make a runmode program or anything else.... This is awkward... mystery for me...
WHY THERE'S A DIFFERENCE IN DIR and EXE... it should be exactly the same result.
I have used Director for years.... This is really strange for me...
>>>>>>>>HOW TO DISABLE THE RIGHT CLICK MOUSE IN THE DIRECTOR?
THIS ONE is useless.... It doesn't prevent the rightmouse click,...
      on rightmouseup me
             nothing
     end
      on rightmousedown me
             nothing
     end

Dear Adobe Forums friends
I need your help and guide through this problem...
In the game's dir file that is run on the DIRECTOR softwawre,
the game runs perfectly, I can do LEFT CLICKS (coz I programmed the script)
and when I do RIGHT CLICKS = there are no effect ( coz I don't do script for it)
LATER THIS GAME TURNED INTO EXE.
It supposed to run like the dir file as ABOVE. BUT STRANGELY, WHEN
I DO RIGHT CLICKS, it turns Error and showing as the picture attachment.
The right clicks that goes error are above the picture of numeric button only. (in DIR file
this run normal). I looked into the script behind the numeric button picture, there are only "on exitframe me", there are no script I made inside the "on exitframe me" that is triggering RIGHT CLICKS.
1. I wonder why there are differences in DIR and EXE effect
2. Why right click? Left click effects are all normal.
3. IS THERE ANY WAY TO DISABLE ALL RIGHT CLICKs since the beginning of EXE. So the game will be run normal. I don't need right clicks anyway, but whenever people do right click there will be ERROR.??
4. Is there any way to STOP THE MESSSAGE BOX TO APPEAR IN FRONT OF THE GAME? (I hate the Dirrector Error Message Box), or auto press OK.
NB: this game uses Buddy API Xtras, File IO Xtras.
Thx
David S

How to enable the screen after triggering the error message

Hi All,
we have a tcode IW31, in that one field(WBS element -PROID) is not mandatory. so we have written the following code to make it mandatory in a user exit EXIT_SAPLCOIH_010.It's triggering the error message, but it is going into disable mode. Please sugget me how to enable the screen after getting the error message triggering.
if not caufvd_imp-proid is initial.
select single * from t350 into wa_t350
          where auart    = caufvd_imp-auart
            and imord    = 'X'.
if sy-subrc is initial.
    pspel = caufvd_imp-proid.
else.
    call function 'CONVERSION_EXIT_ABPSP_OUTPUT'
         exporting
              input = caufvd_imp-proid
         importing
              output = l_posid.
    concatenate text-t10 l_posid text-t11
                into l_textline1 separated by space.
    message i208(00) with l_textline1.
endif.
else.
message e208(00) with 'Please maintain WBS element in Location Tab'.
endif.
Thanks

Hi,
Instead of error message use status message like
message s208(00) with 'Please maintain WBS element in Location Tab'.
Leave to screen sy-synnr.
This will allow to move to the screen and have in enable mode.
WIth Regards,
Dwaraka.S
Edited by: Dwarakanath Sankarayogi on Feb 13, 2009 7:46 AM

How to disable the select options button, while audio is playing in the question template in captivate 8?

How to disable the select options button, while audio is playing in the question template in captivate 8?

Apologies for late reply.
I mean "On Question screens audio keeps on playing even after we have selected an option or options depending on the question type and clicked Submit. How do we stop the audio on selecting an option?"

Can you disable the screen shot feature?

I need to be able to disable the screen shot feature. Anyone know how to do this?

I can't tell you how to use it, but I do know that the iPhone Conficuration Utility can be used for this purpose.
http://support.apple.com/kb/DL1465
Matt

How to disable the salary button

How to disable the salary button in "Combined Per & Asg Form WKFLW_NAME="US HRMS PERSON TASKFLOW" screen function.

You should not modify the taskflow "US HRMS PERSON TASKFLOW" directly. Instead, create a new Taskflow that contains the navigation items you require, and then create a new function that uses the Taskflow.
1. Create a Tasklfow
2. Create a Function using the form "Combined Per & Asg Form" including the parameter WORKFLOW_NAME="XX HRMS PERSON TASKFLOW" (or whatever you have called it)
3. Use this function in your menu definition.
http://download-uk.oracle.com/docs/cd/B11454_01/11.5.9/acrobat/115hradm.pdf
See section "Configuring Oracle HRMS" for more information on Taskflows.

Disable the Screen Field

Hello Abappers,
I have two radio buttons and two text box.
The text box refers to data dictionary and named as
ZIXHR_S_APPROVAL-APPUSER
ZIXHR_S_APPROVAL-APPORG
When i click on a radio button the first text box should be disable and similar with the secon one.
How to disable the text box from the screen?
Please reply soon.
Regards,
Rahul

Hi,
Try the code given below.
Regards,
Wajid Hussain P.
if rb1 = 'X'.
loop at screen.
if screen-name cs 'ZIXHR_S_APPROVAL-APPUSER'.
screen-input = 0.
modify screen.
elseif screen-name cs 'ZIXHR_S_APPROVAL-APPORG'.
screen-input = 1.
modify screen.
endif.
endloop.
else.
loop at screen.
if screen-name cs 'ZIXHR_S_APPROVAL-APPORG'.
screen-input = 0.
modify screen.
elseif screen-name cs 'ZIXHR_S_APPROVAL-APPUSER'.
screen-input = 1.
modify screen.
endif.
endloop.
endif.

How I disable the iPad picture frame mode?

Several times I looked in the settings but could not find this option, just in the passcode settings, but I turned off the passcode, the picture frame is turned on WHY? And how I disable the picture frame? I looked this on youtube in an iPad review video at 2:35 min: http://www.youtube.com/watch?v=Aly5Q_mUhVI
Thanks for the help.

Of course you can.
If you don't want the little flower icon appearing on the unlock screen, set the Allow Picture Frame to Off under Passcode in General Settings.
If you want to deactivate the Pcitrue Frame mode while its running, tap the home button once, and click on the Flower icon at the bottom right whihc should be blue since its on.

How to disable nag screens about updating to Firefox 24

I would like to know how to disable the endless nag screens inviting me to update to Firefox 24.
I do not want Firefox 24 because I tried it for two weeks and it was repeatedly crashing - several times in each day - or simply freezing. I cannot work this way and so I have downgraded to a previous version of Firefox and I have not had a single problem in a whole month.
Please be aware that I do not allow Norton products on my computer so that is not an issue.
I keep a very clean computer - scanning EVERY night before shutdown with CCleaner and JetClean with Avast running permanently in the background. I also scan weekly with Superantispyware.

Note that using any version older than 24 has security risks, I would update and then try to post crash reports using the instructions below.
First update Firefox
* [[Update Firefox to the latest version]]
'''Then once as Firefox crashes 5 times and you have submitted the crashes to mozilla, using the [[Mozilla Crash Reporter]].''' Place crash ID's to this site to find how the problem can be fixed.
#Enter ''about:crashes'' in the address bar (that's where you enter your website URL) and press Enter. You should now see a list of submitted crash reports.<br><br>[[Image:aboutcrashes.png|width=520]]
#Copy the '''5''' most recent crash ID's that you see in the crash report window and paste them into your response here.
More information and further troubleshooting steps can be found in the [[Firefox crashes]] article.

How to reload the screen when changing languages in JavaFX 2?

I'm beginner with javaFX and i need to change language of the screen. but i have no idea how to reload the screen when the language was changed. The application have a button where have the language available. I want just refresh screen when the user change language.
Here is the start method to show the stage.
    @Override
    public void start(Stage stage) throws Exception
        this.stage = stage;
        Locale locale = Locale.getDefault();
        ResourceBundle rb = ResourceBundle.getBundle("resources/Label",locale);
        loader = new FXMLLoader(getClass().getResource("FXMLDocument.fxml"),rb);
        root = (Parent)loader.load();
        FXMLDocumentController controller = (FXMLDocumentController) loader.getController();
        controller.setMain(this);
        scene = new Scene(root);
        stage.setScene(scene);
        stage.show();
here is the function to change the language(in the same class with start function),the rb is the new ResourceBundle:
    public void refresh(ResourceBundle rb)
          //change the language here
1. I don't want to use the resourceBundle to get value in resource file and set label in scene one by one.like following:
this.btnLabel.setText(rb.getString(key.test));
2. I don't want to reload the scene,like following:
    public void refresh(ResourceBundle rb)
         try
            loader = new FXMLLoader(getClass().getResource("FXMLDocument.fxml"),rb);
            root = (Parent)loader.load();
            scene.setRoot(root);
            FXMLDocumentController controller = (FXMLDocumentController) loader.getController();
            controller.setMain(this);
        catch(Exception err)
            err.printStackTrace();
So do we have a solution to just set the resourceBundle and reload the scene easier?
Thanks and best regards!

Your option 2 (reload the FXML for the scene using the new resource bundle as a parameter), is the way this would normally be done and what I would recommend.
Failing that, you could use option 1 of individually resetting the label text of labeled items (I don't really recommend this).
Why don't you want to use option 2?
Perhaps it is because there is some internal state of the UI which differs from the initial state when the the UI is first loaded (e.g. user has typed text in a text field and you want to preserve that). If that's the case you will need to either go with your option 1 of individually resetting the label text of labeled items, or implement something which preserves the UI state and user data by saving it in memory or to disk, reloading the UI via the FXMLLoader (essentially your option 2), then restoring the UI state and user data to what it was before the language change. Preserving and restoring the modified state seems complicated to me if you have a lot of state, so I wouldn't really advise this approach unless you really needed it.

How to disable the screen of copyright at logon?

Similar Messages

Maybe you are looking for