How to disable Tools, Options menu in Disc 4i Plus java applet

Discoverer 4i Plus 4.1.37.01.0
I have a single username that will be shared by a group of people pulling reports out of Discoverer 4i Plus web page.
Is there any way to disable the Tools, Options menu in the web java applet so that users can't change the user preferences
in these tabs. I am using a pref.txt file, but any user that changes the user preferences thru above menu changes the setting
for everyone using that username to access the reports. Even when I bounce the prefs and disc processes, the user-changed
values are still there from when that user made the changes in the java applet.
Discoverer Viewer is not an option because the users have to pass in parameters before their query executes (no single
canned reports for everyone in use).
Thanks for any help..
Kate

You can use the BetterTouchTool to reassign the green traffic light pre-Yosemite behavior:
Select "Other" category at the top of the window.
Make sure that "Global" is selected at the left side.
Click "Configure New Trigger" button in the bottom part of the window.
Select "Leftclick Green Window Button" as trigger.
Select "Zoom Window Below Cursor" as predefined action.

Similar Messages

  • How to disable Internet Options using Group Policy Object?

    Dear everybody,
    Please tell me about how to disable Internet Options via group policy to Internet Options on Tool menu, Internet Options on Control Panel and Command control inetcpl.cpl?
    kea

    Hi,
    The location of this GPO in Windows Server 2008 should be:
    User Configuration\Administrative
    Templates\Windows Components\Internet Explorer\Browser menus
    Enable the Group Policy “Tools
    menu: Disable Internet Options… menu option”
    Hope that helps.
    Regards,
    Leo   Huang
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Odd Startup behaviour and cannot access tools- options menu

    As of this morning my installation of LV8 will not display the normal startup dialog box (allowing you to open existing VIs or open a new one), but simply opens a new VI immediately.  If I close this new NI then again instead of returning to the start up dialog it opens a second new (blank) VI.    Furthermore I cannot open the Tools->option menu from within a VI front panel.
    I've tried repairing the LV installation and when this didn't work I went for a full remove and reinstall - still no joy!
    I've also check that this is not user specific, so that when I log in as a different user on the same PC I get the same behaviour
    Help - please !!
    Solved!
    Go to Solution.

    Hi AMHurrel,
    This sounds rather strange. 
    Did you change anything on your setup?
    When you say you did a full remove and reinstall, how?
    These are the steps I would follow:
    The following procedure will remove the National Instrument Software:
    1.     Turn off the computer and physically remove or unplug all NI hardware that you have installed on your system.
        This includes anything that is PCI-, ISA-, USB-, 1394-, or ethernet-based.
    2.     Turn the computer on and go through Add/Remove Programs (START » SETTINGS » CONTROL PANEL » Add/Remove Programs)
        and remove everything NI-related. Generally, if you can remember, it is best to uninstall things in
        the reverse order in which they were installed. For example, if you installed LabVIEW, then NI-DAQ, and then the
        Internet Developers Toolkit for LabVIEW, you should uninstall the Internet Developers Toolkit first,
        then NI-DAQ, and then LabVIEW last.
    3.     After everything has been removed (do not be concerned at this point if an item still shows up in the
        Add/Remove Programs list after you have removed it), close all programs and restart your computer.
    4.    Go to START button of your operating system, choose RUN and type "regedit". This will open the Registry
        Editor window. Go to the Registry Menu and choose Export Registry File. Select "All" for the export range,
        and select a file name. This creates a backup of the Registry in case a mistake is made when deleting the keys.
    5.     Remove the following registry components from the Windows Registry:
        HKEY_CURRENT_USER\Software\National Instruments Delete the entire tree!
        HKEY_LOCAL_MACHINE\Software\National Instruments Delete the entire tree!
        HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ or \ISA and delete registry entries containing any
        keys with 1093 in them.
        Do not worry if any of these trees are not listed. Continue with the remainder of the process .
        Note: You may need to modify security policies. In Windows 2000/98/95/NT, go to [regedt32] then
        Security>>Permissions. In Windows XP you can modify security options using Edit>>Permissions in the
        Registry Editor (regedit).
    6.     Close regedit.
    7.     Make sure that you do not have any of your own VIs or other files saved in the "C:\VXIpnp",
        "C:\Program Files\National Instruments", or "C:\WINDOWS\nidaq" folders. If you do, copy them to a
        different location. If you are concerned about keeping old virtual channels and your SCXI setup intact,
        then backup the "C:\WINDOWS\niconfig.daq" file, too. Delete all folders and files mentioned above.
        Note: If you have Windows NT/2000, replace "C:\Windows" with "C:\WINNT" in the paths listed above.
    8.     Save the attached file msiBlast.zip to your desktop.
        a) Extract the file msiBlast.exe from the zip archive.
        b) Double click on the downloaded msiBlast.exe file to run the executable.
    c) Choose the Show NI Installers Only selection.
    d) Using (Ctrl+Left Mouse Click) select all National Instruments Software that appears in MSIBlast.
    e) Press the Uninstall button. This will uninstall all of the National Instruments MSI Registry entries.
    f) Optional:
    The Repair option will open the National instruments Installer Program and run the repair option within the installer.
    Maintenance Mode will open the Installer Program and allow the user to modify the installation. To open the installer do not enter anything in the Command Line Arg? Dialog box.
    9.     Reboot your computer.
    10.     You should be ready to install your software. For the cleanest possible install, first install all of your
        application development software, such as LabVIEW, Measurement Studio, etc. Do a custom install, so that you can
        install just the application WITHOUT ANY DRIVERS. Reboot your PC when requested after each install.
        Even if the installer does not tell you to reboot, it would probably be a good idea to do so anyway.
        Now install your driver software and follow the associated user manuals. Some older non Plug-n-Play hardware
        must be installed before the driver. Download the latest versions of the drivers that support your hardware
        from our Drivers and Updates software library (link below), and install them one-by-one, rebooting after each
        install.
    11.     Finally, shut down and re-install your hardware. When you boot back up, it should be detected in MAX.
    NI Drivers Link :  -  http://www.ni.com/softlib.nsf
    **Attached is msiBlast.
    ***Do you get an error messages?
    Let me know what you think,
    Kind Regards
    Kind Regards
    James Hillman
    Applications Engineer 2008 to 2009 National Instruments UK & Ireland
    Loughborough University UK - 2006 to 2011
    Remember Kudos those who help!

  • How to Disable edit option in Logon pad

    Hi,
    How to disable edit option in logon pad
    thanks

    Actually if you are looking to disable the "Edit" option so end users cannot change or modify the existing  Logon Pad options systems, you can.
    What version are you using for SAP GUI?
    7.10 has icons to the right which allow changes. (New, edit, etc)
    7.20 has icons across the toolbar at the top. (pencil, paper, trashcan)
    For both versions, Navigate to C:\Program Files\SAP\FrontEnd\SAPgui (Default location)
    In there you will find 2 executeables:
    saplgpad.exe
    saplogon.exe
    If you run the saplogon.exe it will allow edit, delete and modify
    If you run the saplgpad.exe:
    On the 7.10 version the buttons are gone.
    On the 7.20 version, the buttons are grayed out.
    Hope this is what you are looking for.
    Regards,
    Zecher

  • How to disable drill option for one column in the WebI Report

    Hi,
    How to disable drill option in a column in WebI?
    When the Drill option is enabled by default all the column in the report will have that enabled,
    I ahve added Hierarchy in the Custom hierarhcy list in Universe.
    I am using BOXI3.1 WebI Reports.
    But I wanted only the hierarchy column to have that drill option enabled, rest all column should display text data.
    PLease let me know if you have any idea.
    Thanks in advance.
    Regards

    Cretae the variable at the report level (may be with the same definiton) and then use that variable in the table
    to disable the drill. It will be displayed as normal text object.
    Drill functionality is enabled only on the objetcs coming from the universe.
    Regards,
    Rohit
    Edited by: rohit12 on Mar 11, 2010 10:12 AM

  • How to disable delete option in the receipt work bench thorugh formpersonal

    Hi Team,
    Please let me know, how to disable delete option in the receipt work bench through form personalization

    Hi.
    Condition
    Trigger Event: WHEN-NEW-ITEM-INSTANCE
    Trigger Object: RGW_FOLDER.M_PAYMENT_METHOD_DSP
    Actions
    Type: Property
    Object Type: Block
    Target Object: RGW_FOLDER
    Property Name: DELETE_ALLOWED
    Value: FALSE
    Note: The button will remain visible and if the user presses it, the system will ask if he/she want to delete the receipt. However, if the OK button is pressed the receipt will not be deleted and a message will be shown ("You cannot cannot delete this record")
    Hope this helps.
    Octavio

  • I need to know how to block the option menu on firefox because my students change the connection option bypassing the proxy that should block them when it's not alloud surf on the web. Thank's

    I need to know how to block the option menu on firefox because my students are able to change the connection option bypassing the proxy that should block them when it's not alloud surf on the web. Thank's

    See http://kb.mozillazine.org/Locking_preferences
    <code>//
    lockPref("network.proxy.type", 1);
    lockPref("network.proxy.http", "");
    lockPref("network.proxy.http_port", "");
    </code>
    See:
    http://kb.mozillazine.org/network.proxy.type
    http://kb.mozillazine.org/network.proxy.%28protocol%29
    http://kb.mozillazine.org/network.proxy.%28protocol%29_port

  • How to Disable Tools-- Form settings option..

    Hi Experts,
    I have created two users User1 and User 2, i want the form settings option to be disabled for the 2nd user. How to Disable it? Any Inbuilt settings in SAP B1.
    waiting for the earliest reply.
    Regards,
    Magesh.

    Hi magesh,
    You can do it by creating Additional authorization,follow the below path
    Administration>System Initialization> Authorizations-->Additional authorization
    creator.
    Enter authorization id,name,option,Click update.
    Click Add sub-level.
    Enter authorization id,name,option,Click edit button next to form setting,
    Enter form id for Form settings,For ex,63771,Click update,Click update.
    Now click open general authorization>Select required user>User authorization-->
    Set required authorization(Full/Read/No).Click Update.
    Hope above solution will solve the problem.
    With regards,
    Jeyakanthan

  • How to disable the option of "Overprint [Black] Swatch at 100%" in Indesign by Apple Scripting

    Hi Friends,
    I am new to Indesign Scripting by Apple Script. As a beginner, I am trying to do some basic scripting in Indesign by Apple Script.
    My aim is to disable the option of "Overprint [Black] Swatch at 100%" in Indesign. This option is available when we go to Indesign ---> Preferences----> Appearance of Black.
    Also, if a user opens a file, in which the swatch is already enabled, then it should prompt him for disabling.
    I can make a display dialog in AppleScript. But, I am bit unsure as how can I go ahead and disable this option. I tried this below script:
    tell application "Adobe InDesign CS4"
          tell every layout window to set overprint preview to false
    end tell
    However, it is changing the view option to overprint preview.
    Appreciate your help and suggestions!
    Thanks,
    Abhishek

    tell application "Adobe InDesign CS5"
              tell the active document
                        set overprint black of document preferences to false
              end tell
    end tell

  • How to disable delete option or symbol in attachment control in infopath 2010

    Any have any idea how to disable the delete option or symbol near the attached file using attachment control in infopath 2010.
    I have created a custom list in sharepoint online 2013(Office 365) and customized it in  Infopath forms 2010 
    i want tht user can attach the files using attachment control but not to allow to delete other attached files.
    plzzzzzz help me out :( .

    Hello,
    As per my finding, you have to custom create event receiver to handle this situation. Use "ItemAttachmentDeleting" event to prevent user to delete attachment. Please refer below MSDN link to implement this:
    http://stackoverflow.com/questions/2023414/prevent-deletion-of-attachments-from-a-sharepoint-list-item
    Hope it could help
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • How to disable "shift-option" from zooming out in InDesign?

    Hi all,
    This truly is driving me crazy...how can I disable the "shift-option" shortcut so that I do not zoom out in InDesign? I have searched through the keyboard shortcuts but cannot find where or how to disable this:( I use the shortcut a LOT when I am drag-copying something that needs to be on the same horizontal or vertical line as the the item I am copying from.
    Thank you so much in advance for your help,
    Christine

    I haven't had time to come back here and post a reply because I've been so incredibly busy working on a catalog. I do have to say that this zooming out is KILLING me and cutting heavily into production time. This was not happening in ID CS5 and only seems to have been happening with ID CS6. There is no third key and it doesn't seem to happen ALWAYS...so I am completely baffled. Normally it is when I shift-option drag an object. Sometimes even just option-dragging an object causes it to happen. I just don't know what is causing this or what I can disable to stop it from happening:(

  • I cannot access the PRIVACY menu from the Tools-Options menu to make changes to cookies and history. I can access every other menu on that page (General, Tabs, Content, Applications, Security, and Advanced. But Not PRIVACY. Please help.

    I need to reset/change/clear my cookies, probably clear my cache, and change my history preferences. When I use the Tools-Options choice to bring up the appropriate menu (General, Tabs, Content, Applications, Privacy, Security,and Advanced) all allow me access to make changes (or not), the PRIVACY tab does not open up. It does no allow access to any info contained there in. It is like it doesn't exist or isn't even there. Also, in the Tools menu on the Firefox toolbar, both "Stop Private Browsing" and "Clear Recent History" are grayed out. What gives? Thank you for your help.

    This can be caused by in incompatible/malfunctioning add-on. To test if this is the case follow the procedure in the [[troubleshooting extensions and themes]] article.

  • How to disable the context menu

    Hi folks,
    we have an application running in EP. We want to disable the context menu (right click hand). Any help is welcome.

    Hi!
    I have the same problem because we want to run WDA applications in th internet and there it is "not allowed" to "overwrite" the user's normal browser context menu.
    Additionally we are interested in how to disable the F1 and Ctrl.-F1 help features for the whole WDA application. We do not want to present technical details in the internet.
    Any help very welcome!!!!
    Regards,
    Volker

  • How to disable the option of Resart for application error in SXMB_moni

    Hi Experts,
    I have a scenario of JDBC to Proxy.In this we have created Fault message type to capture any error.The requirement is to disable the option of Restart in SXMB_MONI for application error generated with Fault message.We have made coding for generating application error in inbound proxy code.Looking for a quick reply.
    Thanks
    Deepak

    Hi Mayank,
    I am looking for disabling the "Application Error" generated from Fault message of inbound proxy to "Resart" using Resart button in SXMB_moni of Application system ECC.what I am referring to is how to disable u201Crestartu201D (not resend) of the messages in SXMB_MONI if they have errors.
    For example, the interface to load some entries calls a proxy which may load some messages successfully and some may result in errors. This would appear in the SXMB_MONI with application errors with restart capability. If the user restarts the message it will post the entries again which were successfully posted earlier. We would like to prevent this from happening.
    Thanks
    Deepak
    Edited by: deepak jaiswal on Mar 2, 2010 5:19 PM

  • How to disable DELETE option in media center 7 extender?

    How to disable or remove option "delete" in Xbox360 extender connected to Windows 7 MC?
    After finishing watching a video, Media Center (windows 7) presents me with three options: "delete" "resume" "restart"
    Supposedly kids or someone mistakenly pres delete, ignore warning and ,,,,,,, YOUR VIDEO IS GONE !!!. I have tried changing permissions, but no luck.

    I was trying to solve the same problem tonight and couldn't find any solutions.  After a few tries, I ended up with a solution.  The key is taking away write access and setting the read-only attribute.
    Steps:
    Change security on movie folder
    Remove inherited permission and choose option to set all inherited permissions locally
    Change all user permissions to remove Write (That should remove Full Control and Modify also)
    Make sure your own account is left with full control
    Save security settings and replace the security settings on child folders/files
    Right click movie folder | Properties
    Check Read-Only so that it is checked and not blocked
    The changes have been made, now test
    Right click on a movie file | Verify read only and only your own user has access to write it.
    Make a copy of that movie file outside of the folder
    Attempt to delete the file through Media Center or an extender.  When it prompts to delete, it will mention it is a read-only file.  After clicking yes, it the delete will fail.  If your settings don't
    prohibit the delete, copy the file back and continue testing.
    Note:  Any new files copied into the movie folder will need the read-only attribute set.  

Maybe you are looking for