How to discard or release mutex in labwindow CVI.

Hi,
How to release mutex in labwindow CVI.
I have one existing DLL . This DLL using method 'CreateMutex(NULL, TRUE, "USBDriverRunning");' .
We need to create another dll , this DLL be release Mutex 'USBDriverRunning'.
Thanks
Mukesh Kumar

CreateMutex returns an handle that is to be passed to ReleaseMutex for releasing the resource. After that you must call CloseHandle on the same handle to clean up everytging.
I don't know whether the handle of a mutex created with NULL in the first parameter can be passed to another DLL; I have never tried to do something similar but be careful with the following note int he function help:
If this parameter is NULL, the handle cannot be inherited by child processes.
You will need to carefully read the Remarks section of the function help and make your own tests.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Similar Messages

How to use the checksumdll.lib in LabWindow/CVI to create CRCChecksum();

Hi All,
Any one know how to use the checksumdll.lib in LabWindow/CVI to create CRCChecksum() ?
Thank you.

Do you ave some documentation about that dll?
Have you looked into dll properties searching for vendor name? Maybe you can look int vendorìs site and obtain some help.
Ultimately: are you forced to use that dll or can you use any software to calculate the checksum? There are several CRCs that you can use: provided you know which is the type used you could find an algorithm to calculate the CRC and check an existing one.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Documentation on How to Develop an OPC Client Using LabWindows/CVI?

What documentation is there on how to develop an OPC client application using LabWindows/CVI? What tutorials, if any, are there? What reference manuals, if any are there?
I am completely new to LabWindows/CVI. I will be starting soon with the tutorial, "Getting Started with LabWindows/CVI". However, our application needs to communicate with an RSLinx OPC Server. Any documentaiton on how to learn to do this would be very much appreciated.

http://www.ni.com/white-paper/4626/en/ Just did a quick google and this came up, Labwindows CVI and Labview are quite different but I usually look at Labview examples then try take the general idea from the example and apply it in CVI, hope this helps

How to use CAN256 and CAN257 in Labwindows CVI?

I am trying to learn about CAN programming in LabWindows CVI. None of the samples do anything other than generate cryptic error messages. I do not have a card or interface device yet, but reading in the help files I found this:
"NI-CAN provides a virtual CAN card with two interfaces, CAN256 and CAN257. The two virtual interfaces are connected by a virtual bus. When you write CAN frames to one virtual interface, those frames are received by the other virtual interface, and can be read as channels. This feature allows you to read and write CAN data in the same manner as two real CAN interfaces connected by a real CAN cable. The conversion does not require real NI CAN hardware, and your application is not required to check for specific CAN IDs."
I modified the Waveform ouput project and add CAN256 to the dropdown in the uir file. However when I run it, I get the same error message as always, error -1074388725.
Is there an example CVI code someplace to demonstrate the use of these virtual channels?

Thanks Drew.
Ultimately, my customer provided me with a WriteCAN256.vi and ReadCAN257.vi that were perfect for my needs. The WriteCAN256.vi along with my NI USB 8473s allowed me to provide data collection on multiple CAN devices and to verify that my Software can handle all data types from CAN devices.
Note: My customer allowed me to share his .vi's. They are enclosed ...
Best Regards,
Don W
Attachments:
CanBus Read (Frames)_85.vi ‏55 KB
CanBus Write (Frames)_85.vi ‏48 KB

How to write to MS Word using LabWindows/CVI

HI all
is there any toolkit available to write to MS Word in LabWindows/CVI. like the report generation toolkit in Labview is there any option in CVI.
regards
Regards
Solved!
Go to Solution.

Hi,
there is an instrument driver (toolslib\activex\word\wordreport.fp) and several examples are shipped with CVI, i.e. word2000demo.cws

How can I convert a project from LabWindows/CVI 2010 to a Visual Studio 2011 project?

I have a good sized project, 12 source files, 14 headers, 1 uir, that I want to be able to edit and compile in MS Visual Studio 2011, MSVC++.
I remember being told that LabWindows dropped support for C++ in 2008 and no longer had a wizard for converting projects. I know I can go the DLL route, but I have never created a DLL before and wouldn't know where to begin with it. What would be the best way to go about this conversion?
Solved!
Go to Solution.

CVI 2010 still supports the Visual Studio Conversion Wizard for Visual Studio 2005/2008. We do plan to add support for VS 2010 in a future release.
If you need a VS 2010 project now, you can use the Visual Studio 2008 conversion wizard, then upgrade the VS 2008 project to VS 2010.
National Instruments
Product Support Engineer

How do i Convert c++ program to LabWindow/CVI

I

Hi Heater,
There's no direct way to convert C++ code into CVI.
The best you can do is to compile C++ code into dll, and import it into CVI.
You may refer to http://zone.ni.com/devzone/cda/tut/p/id/3341 for more information.
Regards, Kate

How to get javahelp release install path?

How to get javahelp release install path?
currently usage their tool <MagicHelp>.
magichelp is multi-user help authoring tool,
currently Support Java help 1.0/2.0.
Home:http://www.gethelpsoft.com

@BalusC
ust for a reference cause i'm new in JSP This has nothing to do with JSP, but with basic knowledge of an essential API. I have given you the link to the File API. Are you saying that you refused to read the API documentation, which clearly explains you how to use the File and shows which methods are all available to you undereach the straightforward getName() method, and expecting that the others may chew the answers for you? Loser.

How to set a DMA transfer type for PXIe-6536 in LabWindows/CVI?

I have a PXI chassis PXIe-1078 with a controller PXIe-8115 running under Windows 7. The digital output board is PXIe-6536.
I use a function DAQmxSetChanAttribute to set a property DAQmx_DO_DataXferMech to a value DAQmx_Val_DMA, since I want to use a direct memory access data transfer. This wokred well with a PCI-6534 board using the same LabWindows/CVI code before migrating it to the PXIe system.
Unfortunately, running this code on the PXIe system reports a DAQmx error -200452: "Specified property is not supported by the device or is not applicable to the task".
The task is created in the following simple way (the board name in MAX is 'Dev1'):
   DAQmxCreateTask ("digTask", &digitalTask);
   DAQmxCreateDOChan (digitalTask, "Dev1/port0:3", "DIG_CHANNELS", DAQmx_Val_ChanForAllLines);
   DAQmxSetChanAttribute (digitalTask, "", DAQmx_DO_DataXferMech, DAQmx_Val_DMA, 15);
How can I solve this problem? How is it possible to choose between different transfer types?
Thank you in advance for any hint!

Hi CavityQED,
The PCI-6534 is a "Digital I/O" board while the PXIe-6536 is a "High Speed Digital I/O" board, that's why they don't have the same properties.
By the way you can use DMA transfer with this method :
http://zone.ni.com/reference/en-XX/help/370520J-01/hsdio/direct_dma/
Let me know if it helps you.
Regards.
Mathieu_T
Certified LabVIEW Developer
Certified TestStand Developer
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
LabVIEW Tour
Journées Techniques dans 10 villes en France, du 4 au 20 novembre 2014

How to get bar graph in word in labwindow/CVI ?

how to get bar graph in word in labwindow/CVI ?

ashwinic9,
spawning your question over more and more threads (the present one, this one and this other one) won't give you a faster answer; instead, it will irritate forum users!
Especially if you have at your disposal a fast way to perform a test. I pointed you some days ago to word report example, that writes a table to a word document: did you tried changing the graph into a bar graph and generating the report? I have done it for you and the result is OK, as you can see in the attached document.
Now, since the example works well, there must be something in your particular situation that prevents the graph to be shown; that is: you must add some more data on your actual problem and maybe a small example that exposes the problem.
But please: keep active only this discussion and let the other threads die!
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?
Attachments:
wordreport.doc ‏38 KB

I used to working with Labwindow CVI and i would like to know how can i use the commands "loadpanel" and "Displaypanel " in Labview. Using Invoke Nodes?

I want to make another panel appears and runs, but i don´t want to use a subpanel. So, i would like to use somenthing similar to Loadpanel and Displaypanel, that you can use in Labwindows CVI, but in Labview, is ti possible?I hope your answers, thank you!!!

Hi Bichillo,
I posted an example here.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=137&HOID=50650000000500000014570100&HTHREAD=000087828&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
It demonstrates how to do what you are asking.
I do not mind you laughing at the code.
Have fun!
Ben

How to setup a release strategy for store generated purchase order

Hi there,
Does anybody know how to setup a release strategy for store/plant generated purchase order? I have a request from our client, but I never cross this before. Please help and let me know the step with every single detail.
Greatly thank for your help.
Kind Regards,
2tea

Please go thru the below Release Procedure and check whether you have maintained all the settings properly.
PO RELEASE STRATEGY
The release code is a two-character ID allowing a person to release (clear, or approve) a requisition or an external purchasing document. The release codes is basically controlled via a system of authorizations (authorization object M_EINK_FRG).
Use SE12, structure CEKKO to check all the fields available for controlling the Purchase Order.
e.g. If the total value for the Purchase Order exceeds 10,000, release strategy 01 is assigned to the Purchase Order. There is only one characteristic created in this example. For controlling the Purchase Order type, create characteristic for CEKKO-BSTYP and the value NB.
CT04 - Create Characteristic e.g. NETVALUE
Click Additional data Table name CEKKO Field name GNETW and press enter
(for currency dependent field, you are prompt to enter the currency which the system then converts the currency of the Purchasing document into this currency)
In the Basic data (X refers to tick),
X Mutliple values
X Interval values
In the Value data, in the Char. value column, type >10000 and press enter
Save your data
CL02 - Class
Class - Create REL_PUR
Class type - 032
Click Create
Description - Release Procedure for Purchase Order
In the Same Classification section, click Check with error
In the Char. (characteristic) tab, type NETVALUE to assign your characteristics to the class
OMGS - Define Release Procedure for Purchase Order Type
Release Group - New entries
Rel.group Rel. Object Class Description
02 REL_PUR Rel. Strategy for PO
Release codes - New entries
Grp Code
02 01
Release indicators
Release indicators Release Description
0 Blocked
1 X Release
Release Strategy
Release group 02
Rel.strategy 01
Release codes 01
Release status 01
Classification Choose your check values
OMGSCK - Check Release Strategies
(make sure there are no error messages)
Once the Purchase Order is not release, buyers will not be able to print the Purchase Order.
Goods Receipts will be shown with Message no. ME 390 - Purchasing document XXXXXXX not yet released.
In 4.6c, Purchase Order with Release Strategy have a tabs at the end of the Header. This allowed the buyers to check the release status of the Purchase Order.
The person with the release authorization have to use ME28 to release the Purchase Order.
Regards,
Ashok

How does the URL of DataSocket constitute?And how to use it in LabWindows/CVI ?

Hi ！
There's a problem puzzled me some days.How does the URL of DataSocket constitute ? And how to use it in LabWindow/CVI ?
For example.I have downloaded a code in http://zone.ni.com/devzone/cda/epd/p/id/3787.I want to make it work properly.So I configure my DataSocket Server Manger according to the URL of this statement.
DS_Open ("dstp://weather.natinst.com/weather/current",
DSConst_ReadAutoUpdate, DSCurrentCallback, NULL,
&dsCurrentHandle);
My DateSockket Server Manger is configured as:
However,it could not work properly when I debug it.
There's a introduction at the top of the code."You may need to replace the references to weather.natinst.com to 130.164.140.10 if the DNS isn't working properly."So,I modified the statement into
DS_Open ("dstp://130.164.140.10/weather/current",
DSConst_ReadAutoUpdate, DSCurrentCallback, NULL,
&dsCurrentHandle);
but,it did work properly.
We want to communicate with other computers via the URL of DataSocket in LabWindows/CVI.Whereas,how could we make it ia the URL ?
If anyone could help me solve this problem,I would appreciate it very much !
Best regards.
xiepei
I wouldn't care success or failure,for I will only struggle ahead as long as I have been destined to the distance.

Hi !
Thank you very much for your reply! I will accept your advice.
Besides,I have another question.If I want to visit other computers or other websites，how does the URL of DataSocket I constitute ? Does the URL has any relation with the DataSocket Server Manger ？If does,how to configure the DataSocket Server Manager to let them connected.If they have no relation,how to use the DataSocket Server Manger ?
After all,I want to know how to use it in LabWinows/CVI ？
Thank you very much !
Best regards!
I wouldn't care success or failure,for I will only struggle ahead as long as I have been destined to the distance.

After the new project by importing PPT release, how to achieve the release of the demo mode SWF, but not now only Click to continue?

After the new project by importing PPT release, how to achieve the release of the demo mode SWF, but not now only Click to continue?
Note：Captivate 5.5
Thks

通过导入PPT新建的项目发布后,如何实现发布演示模式的SWF（自动播放）,而不是交互模式的SWF（只能点击才能继续）？

How to access the result list in teststand after execution using labwindows/cvi

I am developing a user interface in labwindows/cvi that runs multiple teststand sequence files and would like to combine their reports (generated in teststand) into a single file at the end of a UUT. What is the best way to do this? At the moment, I'm trying to access the result list local variable after the execution has ended using API calls from labwindows/cvi and an end-of-execution callback event but those run-time variables do not exist anymore. How do I get a hold of the result list array at the end of an execution? I would like to grab this variable and pass it along from sequence to sequence using labwindows/cvi and not teststand itself. Is this possible? Any help would be great.
Thanks in advance,
Luis

Hey Luis,
Check out the response to this thread at the NI TestStand board here!

How to discard or release mutex in labwindow CVI.

Similar Messages

Maybe you are looking for