How to display a date also in the alternate calendar format beside the main region calendar format?

In case I defined alternate calendar and I want to display he date from the main calendar and also from the alternate calendar how can I do it?
keren tsur

Hi
first convert the date to YYYYMMDD
CONVERSION_EXIT_PDATE_INPUT
then pass the date to this FM
Try using this FM
CONVERSION_EXIT_SDATE_OUTPUT
Import parameters               Value
INPUT                           20070220
Export parameters               Value
OUTPUT                          20.FEB.2007
regards
Shiva

Similar Messages

How to display group data only when the particular group is clicked

Hi frnds,
I want to design my report as follows:
Data is grouped by country, and for each country it is showing details for that country. I need to find out a way to display all group names first. E.g.
Argentina
Aruba
Australia
And on click of particular country name it should display its details below it
e.g.
-Argentina
     BBB            Mendoza          123456
+Aruba
+Australia
Has anyone done that before??? Is it possible to achieve it through Crystal Report Designer (2008)?? If yes then how???
A prompt reply would be appriciated as i need this information urgently.
Thanx.

Thanx Jehanzeb,
The sample u suggested did not solve my problem since it is opening the group data in new window.
My question is - can we show/hide group data by clicking on that particular group (under that group name).
e.g.
->(initial display - only groups)
+ Australia
+ America
+ Bhutan
->(on clicking a group)
+ Australia
\- America
abc    xyx    12213213    wqe9090
dsd    dcv     90eur90e    ifjjdioifdoi
+ Bhutan
In short, I am looking for on-demand display of records grouped by some field and the expansion of data must be done in the same page.
Edited by: Kuldeep Chitrakar on Aug 6, 2008 12:44 PM
Edited by: Kuldeep Chitrakar on Aug 6, 2008 12:45 PM
Edited by: Kuldeep Chitrakar on Aug 6, 2008 12:46 PM

Display word/pdf document in the HTML region or report

Hi,
How to display blob content stored in a table in HTML region or report region.
I already have a process to display the image content.
But my question here is how to display word/pdf document within the html region so that the user can read the document without downloading it.
Any suggestions/solutions would be of great help.
Thanks in advance...
Thanks,
Ramesh P.

I was dead wrong.
The display of images from BLOB is a special case because APEX provides a Display Image item type.
Moreover, HTP/HTF packages also do not provide for handling of BLOB content. So AJAX cannot be used.
Which implies that the only way to get binary content, other than images, is with the use of a WPG_DOCLOAD.DOWNLOAD_FILE call.
This in turn implies that it may not be feasible to "inject" the BLOB into an exist HTML DOM in the Browser.
Regards,

All the message dates in the message list changed in every mailbox to a recent date, I don't know why.. The dates within the messages' headlines themselves remained correct. How do I re-establish the correct dates also in the mailboxes' message list?

All the message dates in the message list changed in every mailbox to a recent date, I don't know why.. The dates within the messages' headlines themselves remained correct. How do I re-establish the correct dates also in the mailboxes' message list?

First thing is to forget all the complex configs and just try to schedule the report to run once now, no alerts, no notifications, no nothing.
Does that work?
Then you can build up the schedule, to see where the problem is coming from.
Sincerely,
Ted Ueda

How to display all data on one page in web app

Hello.
So I have web app JSF (IceFaces framework) + JBoss all Crystal Report working perfectly. So I have page with Crystal Report tags (e.g.
<bocrv:reportPageViewer reportSource="#{crystalReport.reportPath}" ...
in this report I have table with some data (data from DB) and I want to display this data on one page. Unfortunately now this data are moving to the next page and unfortunately I even donu2019t know how switch to the next page (I see only info e.g. 1with 2).
So how to display this data on one page if its impossible how to torn on pagination.

So I canu2019t do this, I canu2019t display all data on one page (until Iu2019m using JSF tags)?
In JSF tags Iu2019m setting only path to file. In my bean Iu2019m using u201CReportClientDocumentu201D object itu2019s easy way to load report file (u201Copenu201D method) and set parameters (u201CgetDataDefController().getParameterFieldController()u201D method) and also connect to data base (u201Clogonu201D method) but I havenu2019t this property u201CsetSeparatePages(boolean)u201D.
Maybe Iu2019m doing this wrong and there is a simpler way maybe I can use somehow u201CCrystalReportVieweru201D please give my any advice.

SVG Pie chart : how to display no dat found message

Hello,
I have a SVG pie chart and written a message 'no data found' under charts attributes.
If there is no data for the chart,
In IE :the chart region will be blank . chart heading will be displayed and . no 'no data found ' message is displayed.
In mozilla : in the chart region, i can see ,the part of whole page where i display the chart ,is filled . Chart region heading is also displayed.
Could you please reply , how to display 'no data found ' in svg pie chart?
Thanks in advance.
Regards,
Archana

Hello,
I have a SVG pie chart and written a message 'no data found' under charts attributes.
If there is no data for the chart,
In IE :the chart region will be blank . chart heading will be displayed and . no 'no data found ' message is displayed.
In mozilla : in the chart region, i can see ,the part of whole page where i display the chart ,is filled . Chart region heading is also displayed.
Could you please reply , how to display 'no data found ' in svg pie chart?
Thanks in advance.
Regards,
Archana

How to display current date in query header?

Hi,
How to display current date in query header?
I use Query Designer for development.
Thanks,
Arun KK

Hi Arun,
You can define fixed header lines and footer lines so that when you generate the query list, they can receive current values of certain fields. When you define a header line or a footer line, you must specify a character string of the type &field, where field is the short name of a field.
This function allows you (for example) to place a sort criterion in the header line.
You can include the following fields as variables in the headers directly:
%NAME
Name of the user processing the query
%DATE
Current date
%TIME
Current time
%PAGE
Current page number (6 characters)
%P
Current page number (3 characters)
These fields can be used in the short forms N,D,T and P. If you want to use these letters as short names for query fields, the field values from the query are used.
You can also see the link
[http://help.sap.com/saphelp_nw70/helpdata/EN/6e/dd68721faf11d6b1d500508b6b8b11/frameset.htm]
Regards,
NR

How to display retrieved data from DB on web page

Dear all,
how to display retrieved data from oracle database on web page,Does anyone can give me an simple example?
thanks
WJ

Hi,
I use JRun tags but you can use Oracle tags or just JDBC... First u need to install jdbs connection and set e connection by using JMC (For JRun) named nomad.
U can also try the link below for JRun tags..
http://wds.its.uiowa.edu/cache/docs/jrun/html/JRun_Custom_Tag_Library/contents.htm
<%@ page import="java.sql.*,javax.sql.*,java.text.*,allaire.taglib.*" %>
<%@ taglib uri="jruntags" prefix="jrun" %>
<%@ page contentType="text/html; charset=ISO-8859-9" %>
<html>
<head>
<title> Test Page </title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-9">
</head>
<body>
<BODY BGCOLOR="#FFFFFF" LEFTMARGIN=15 TOPMARGIN=20 >
<jrun:sql datasrc="nomad" id="q1">
select empno,
     ename
from emp
order by ename
</jrun:sql>
<center>
<table border = 0 cellpadding = 3 cellspacing = 1>
     <th>EmployeeNo</th><th>Name</th>
<jrun:param id="q1" type="QueryTable"/>
<jrun:foreach group="<%= q1 %>">
               <tr>
               <td> <%= q1.get(1) %> </td>
               <td> <%= q1.get(2) %> </td>
               </tr>
</jrun:foreach>
</table>
</center>
</body>
</html>
----------------------

How to display no data found in RTF template ? XML Publisher

Hi
I have xml file, how to display no data found in RTF template ? XML Publisher ?
This is the XML File
<?xml version="1.0" encoding="UTF-8"?>
<INVALIDSERIALPRODUCT>
<P_ORG_CODE></P_ORG_CODE><P_DATE_RANGE_FROM></P_DATE_RANGE_FROM><P_DATE_RANGE_TO></P_DATE_RANGE_TO><P_ITEM_NUMBER>VIR</P_ITEM_NUMBER><P_LOT_NUMBER></P_LOT_NUMBER><P_RMA_NUMBER_FROM></P_RMA_NUMBER_FROM><P_RMA_NUMBER_TO></P_RMA_NUMBER_TO><P_CUSTOMER_NAME></P_CUSTOMER_NAME><P_EMAIL></P_EMAIL>
<G_SNQ>
<USER_NAME>NSAWHNEY</USER_NAME>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000004</SERIAL_NUMBER>
<RMA_NUMBER>8200000106</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T05:13:05.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000004</SERIAL_NUMBER>
<RMA_NUMBER>8200000106</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T05:52:23.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000016</SERIAL_NUMBER>
<RMA_NUMBER>8200000106</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T05:53:06.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>011000000011</SERIAL_NUMBER>
<RMA_NUMBER>8200000106</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T06:09:16.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number does not exist in Axway Track-n-Trace</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000021</SERIAL_NUMBER>
<RMA_NUMBER>8200000106</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T06:11:09.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000001</SERIAL_NUMBER>
<RMA_NUMBER>8200000066</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T06:46:04.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000001</SERIAL_NUMBER>
<RMA_NUMBER>8200000066</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T07:08:21.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>00000000004 </SERIAL_NUMBER>
<RMA_NUMBER>8200000066</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T07:13:05.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Unknow Error </REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000011</SERIAL_NUMBER>
<RMA_NUMBER>8200000101</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T19:32:00.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000004</SERIAL_NUMBER>
<RMA_NUMBER>8200000107</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-14T02:49:40.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000092</SERIAL_NUMBER>
<RMA_NUMBER>8200000109</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-14T07:52:22.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000031</SERIAL_NUMBER>
<RMA_NUMBER>8200000109</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-15T02:24:27.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000034</SERIAL_NUMBER>
<RMA_NUMBER>8200000109</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-15T02:30:28.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Catchall fault scope has been executed</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000010</SERIAL_NUMBER>
<RMA_NUMBER>8200000114</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-15T03:36:18.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000158</SERIAL_NUMBER>
<RMA_NUMBER>8200000114</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-15T04:19:48.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
</G_SNQ>
</INVALIDSERIALPRODUCT>
thanks
nks

This is the General XML forum.
The homepage description says :
Discussion of the general XML language, standards (XSLT, XQuery, XMLSchema, etc.) and application management issues, suggestions and tips.
The BI Publisher forum is here :BI Publisher
So please mark this post as answered and ask again over there.

How can I import data in to the digital word generator in Multisim?

How can I import data in to the digital word generator in Multisim?
I just received this comment from a friend, a RADAR engineer, who has just down loaded Multisim. He has been using HP/Agilent software. He has a work around using a piecewise linear voltage waveform with data imported from Excel but this is not really a good solution. It would also be helpful to import data from Mathcad or equivalent.
"I thought I was about to be impressed with MultiSim but it ended only in disappointment. There is a word generator in the simulation instrument panel which can drive the DAC with a waveform and it can have thousands of lines of values. I opened Excel, wrote the formula to generate the time and voltage points for a chirp, converted to DAC values in Hex and then went back to the word generator in MultiSim to load the values only to find that you have to enter each value manually. It doesn’t even allow you to paste in a list of values from a text file. I’m not going to type 5000 values by hand. If you get the chance to give feedback to National Instruments please ask them if the paste option can be added to the word generator. MultiSim is useful in many regards, but in this case, it left me with the impression that it is considerably limited in capability compared to what I’m used to."

Hi,
You can load your data automatically in the Multisim word generator. Follow these steps:
- Save your data file (in excel .xslx ir .csv format) on your computer
- Change the extension of the file to ".dp"
- Double-click the word generator in Multisim and click on Set...
- In the Settings dialog box, click on Load and then Accept
- This will prompt you to select the .dp file you have on your computer, select it and you're good to go
However, in Multisim you have the option of creating your own custom simulation analysis and instrument.
I will try creating the instrument and send it back to you but it might take some time.
Multisim and LabVIEW are very powerful in test automation, with the custom instruments you create for Multisim you don't need to export your data file into excel from LabVIEW (or MathCAD or other tools) and then reload it into Multisim. The test procedure is automated instead.
Please check this reference design about automated simulation
http://zone.ni.com/devzone/cda/tut/p/id/7825
Here is how you can create your own custom measurement tool in Multisim and LabVIEW, but as I mentioned, I will create the word generator and come back to you anyways
http://zone.ni.com/devzone/cda/tut/p/id/5635
Let me know if you have any questions.
Mahmoud W
National Instruments

How to display multi-channel image in the 'proxy'?

There're many examples to show how to display composite channels in the 'proxy'. But I don't find any example to show how to display multi-channel image in the 'proxy'. I found that I can use PSPixelOverlay to display alpha channel data like this:
int nSpotChannel = gChannelCount - 4;
PSPixelOverlay* overlay = new PSPixelOverlay[nSpotChannel];
for(int i = 0; i < nSpotChannel; i++){
       if( i != (nSpotChannel - 1) )
             overlay[i].next = overlay + i + 1;
       else
       overlay[i].next = NULL;
       overlay[i].data = gChannelData + (4 + i) * nPlaneBytes;
       overlay[i].rowBytes = gProxyRect.Width() * gDocDesc->depth / 8;
       overlay[i].colBytes = 1;
       overlay[i].r = 230;
       overlay[i].g = 161;
       overlay[i].b = 174;
       overlay[i].opacity = 255;
       overlay[i].overlayAlgorithm = kStandardAlphaOverlay;
pixels.pixelOverlays = overlay;
Then, Seeing red part, it will trigger a new problem, that is how to get the color value of the alpha channel by plung-in itself? It seems that no channel color value info is in FilterRecord.
If you have other solution, please tell me. Many thanks!

This is what I've been doing - was just curious if there was a way to see a more cohesive image.
If the individual EQ plugins are in fact the answer, is there any way to smooth how the Analyzer displays? The image I posted above, all of the tonal curves are very smooth. The analyzer tool shows a lot of peaks and valleys within the overall curve and it's hard to pinpoint each instrument's "sweet spot." Vocals for example are very hard to spot.
- Morgan

How to display properties of dimension on the input form and report in bpc

Dear Expert,
Please tell me how to display properties of dimension on the input form and report in bpc. I can only display dimension number.
thanks so much
hungth

Hi Hungh,
If your are using BPC 10 with EPM add in client, you can use the function:
EPMDimensionProperty ()
This function retrieves the properties of a specified dimension in a specified cell range.
Thanks, Safa

How to get values/data stored in the database into a list-item.

how to get values/data stored in the database into a list-item.
i tried to make a list item without any values assigned to it...but i got the below error.
FRM-30191: No list items defined for required poplist.
or
FRM-32082: Invalid value for given item type.
List EMPNO
Item: EMPNO
Block: EMP
Form: MODULE5
FRM-30085: Unable to adjust form for output.
then according to some docs, i tried the the following for the trigger
when-new-form-instance
declare
     rg_name varchar2(40) := 'emp_rec';
     status number;
     groupid recordgroup;
     it_id item;
begin
     it_id := Find_Item('empno');
     groupid := create_group_from_query(rg_name, 'select empno from emp');
     status := populate_group(groupid);
     populate_list(it_id, groupid);
end;
but yet didnt work... :(
so how the heck do i get values fetched from the database table into the list item?

for list items you need to values in the record group, one is the shown value and one is the returned value.
Check out the online help for the populate_list built-in.
You'll need something like select ename,ename from emp as the record group query.

My ipod went to the ''connect to itunes mode'' and i want to use my itunes backup but how can i do that. also when the ''recover your ipod screen'' appeared i accidentally chose not to show it anymore.

My ipod went to the ''connect to itunes mode'' and i want to use my itunes backup but how can i do that. also when the ''recover your ipod screen'' appeared i accidentally chose not to show it anymore. please help i just had it for half a day.

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

How to display language key (0LANGU) in the query for BW report

Hi,
Can someone tell me how to display language key (0LANGU) in the query? I want to display which language (English or French) is used for material description in BW report. Thx.

hi,
check if the infoobject is kept as lang dependent or not for material text, else you need to create a masterdata attribute with text and lang keys and do corresponding mapping, so then it can be displayed in your report
regards
laksh

How to display a date also in the alternate calendar format beside the main region calendar format?

Similar Messages

Maybe you are looking for