How to display a file system in tree view

Hi all,
I Developed an application (APEX 3.2) to track incoming and outging mail. Incoming mail is scaned and saved on "ARCHIVE" server directory structure as the following
Incoming**2011*
** 1
**2
**3
**4
2011 is the year and numbers from 1 - 4 are letters ID. I have no problem to link the incoming mail with the image on file server (each letter must have an image)
Some letters may have attachmentms (different format pdf, word, jpg, etc.)
attachment*2011
**2
**4
I would like to enable attachment link only for for letters with attachment in above case letter 2 and 4 and the directory where the attachment saved to be displayed in TREE view.
Thank you.
Ribhi

Hi,
have you tried
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/9d/a6884121a41c09e10000000a155106/frameset.htm">TextView</a> or <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/3b/219141c1d0ae5fe10000000a1550b0/frameset.htm">FormattedTextView</a> ?
You could also make a development request.
Regards, Heidi

Similar Messages

How to display Pdf file in iPad site

Hi
How to display Pdf file in web page which can able to view in iPad safari?
Thanks,
Arun

You can't really.
You need to use DHTML in the swf-wrapper HTML file, usually a
division wrapped iFrame, and load the PDF into the iFrame as an
overlay to the Flash.

How to implement a file system in my app?

How to implement a file system in my app? So that we can connect to my iPhone via Finder->Go->Connect to Server. And my iPhone will show as a shared disk. Any ideas about it? Thanks.

Hi Rain--
From webdav.org:
DAV-E is a WebDAV client for iPhone, with free and full versions. It provides remote file browsing via WebDAV, and can be used to upload pictures taken with the iPhone.
http://greenbytes.de/dav-e.html
http://www.greenbytes.de/tech/webdav/
Hope this helps.

How to display Doc file format in the JEditPane?

At this time , JEditPane supports RTF and HTML file format ,but
Could anyone tell me how to display DOC file format using JEditPane
or other JTextComponents?
Thx a lot!
Caton

Hi,
there is no support for doc files (M$ Word?) in Java. You would have to create your own classes for that eventually subclassing JEditorPane, EditorKit, Document etc. As well you'd need your own reader for the doc format.
The problem I see with that however is that there is nothing such as thedoc file format. Microsoft just saves anything produced by MS Word into files ending with .doc. But, if there is anything such as a .doc file format, it changes more often than the weather in April.
Ulrich

How to determine the file system on Solaris

Friends,
How to determine which file system I have installed UFS or ZFS on Solaris
Thanks

Other methods would include looking at the /etc/vfstab if it's in there or fstyp(1M):
System Administration Commands fstyp(1M)
NAME
fstyp - determine file system type
SYNOPSIS
fstyp [-a | -v] special [:logical-drive]

How to display the file status in the status bar?

Hi all,
Can anyone tell me how to display the file status in the status bar?
The file status can consists: the type of the file, the size of the file etc..
thanx alot..

    class StatusBar extends JComponent {
          JLabel l = new JLabel("ready");
        public StatusBar() {
              super();
              setLayout(new BoxLayout(this, BoxLayout.X_AXIS));
              add(l);
          public void setText( String prompt ) {
               l.setText(prompt);
               setVisible( true );
        public void paint(Graphics g) {
              super.paint(g);
    }

How to display flash file in adf pages

how to display flash file in adf pages need help

Thanks all,
It is resolved.
the code i am using to display a flash is below.
<f:verbatim>
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000"
codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version
=10,0,0,0" width="300" height="300" id="11gR1_aniH_grey" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<param name="allowFullScreen" value="false" />
<param name="wmode" value="transparent" />
<param name="movie" value="mx2004demo.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#4d5c64" />
<embed src="../Images/mx2004demo.swf" quality="high" width="300" height="300" name="mx2004demo.swf" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false"
type="application/x-shockwave-flash" wmode="transparent"
pluginspage="http://www.adobe.com/go/getflashplayer" />
</object>
</f:verbatim>

How to display XSL file to ASPX in dreamweaver

Hi,
Just wondering how to display XSL file in ASPX page?
I normally do it in ASP page by using server behaviour XSLT transformation and bind it to ASP page and this works very well.
Now I am trying to use the same method and using ASPX page this time but this time there is no option from server behaviour where I can bind it to my ASPX.
Can someone help or perhaps let me know where I can find the information how to do it?
Thanks,
Rush O

You mean you want to see the XML source?
You need to replace the characters '<' and '&' with corresponding entities '<' and '&'. You can use replaceAll, but do the ampersands first.
Then I suggest you probably want to put them in a <PRE> block.

How to display RTF file and .doc file in JTextPane

How to display RTF file and .doc file in JTextPane??

Duplicate post
http://forum.java.sun.com/thread.jsp?forum=57&thread=567029&tstart=0&trange=30

How to extend the file system?

hello experts,
how to check wether file system is full?and how to extend the file system?

Hi,
You can check whether your file system occupancy using Unix level command df -k.
how to extend the file system?
Whats the OS platform you working upon and need to extend the file system. Based on individual OS platform commands may vary.
Regards,
Deepak Kori

How to display pdf file with java code?

Hi All,
i have a jsp pagein that page if i click one icon then my backing bean method will call and that method will create pdf document and write some the content in that file and now i want to display that generated pdf document.
it should look like you have pressed one icon and it displayed pdf file to you to view.
java code below:
FacesContext fc = FacesContext.getCurrentInstance();
ExternalContext ec = fc.getExternalContext();
HttpServletResponse resp = (HttpServletResponse) ec.getResponse();
resp.setHeader("Content-Disposition", "filename=\"" + temppdfFile);
resp.encodeRedirectURL(temppdfFile.getAbsolutePath());
resp.setContentType("application/pdf");
ServletOutputStream out = resp.getOutputStream();
ServletUtils.returnFile(temppdfFile, out);
out.flush();
and above temppdfFile is my generated pdf file.
when i am executing this code, it was opening dialog box for save and cancel for the file, but the name of the file it was showing me the "jsp file name" with no file extention (in wich jsp file i am calling my backing bean method) and type is "Unknown File type" and from is "local host"
it was not showing me open option so i am saving that file then that file saved as a pdffile with tha name of my jsp file and there is nothing in that file(i.e. empty file).
what is the solution for this. there is any wrong in my code.
Please suggest me.
Thanks in advance
Indira

public Object buildBarCodes() throws Exception
File bulkBarcodes = null;
String tempPDFFile = this.makeTempDir();
File tempDir = new File("BulkPDF_Files_Print");
if(!tempDir.exists())
tempDir.mkdir();
bulkBarcodes = File.createTempFile
(tempPDFFile, ".pdf", tempDir);
//bulkBarcodes = new File(tempDir, tempPDFFile+"BulkBarcode"+"."+"pdf");
if(!bulkBarcodes.exists())
bulkBarcodes.createNewFile();
Document document = new Document();
FileOutputStream combinedOutput = new FileOutputStream(bulkBarcodes);
PdfWriter.getInstance(document, combinedOutput);
document.open();
document.add(new Paragraph("\n"));
document.add(new Paragraph("\n"));
Image image = Image.getInstance(bc.generateBarcodeBytes(bc.getBarcode()));
document.add(image);
combinedOutput.flush();
document.close();
combinedOutput.close();
FacesContext facesc = FacesContext.getCurrentInstance();
ExternalContext ec = facesc.getExternalContext();
HttpServletResponse resp = (HttpServletResponse) ec.getResponse();
resp.setHeader("Content-Disposition", "inline: BulkBarcodes.pdf");
resp.encodeRedirectURL(bulkBarcodes.getAbsolutePath());
resp.setContentType("application/pdf");
resp.setBufferSize(10000000);
ServletOutputStream out = resp.getOutputStream();
ServletUtils.returnFile(bulkBarcodes, out);
out.flush();
return "success";
This is my action method which will call when ever i press a button in my jsp page.
This method will create the barcode for the given barcode number and write that barcode image in pdf file
(i saw that pdf file which i have created through my above method, This PDF file opening when i was opening manually and the data init that is also correct means successfully it writes the mage of that barcode)
This method taking the jsp file to open because as earlier i said it was trying to open unknown file type document and i saved that file and opended with editplus and that was the jsp file in which file i am calling my action method I mean to say it was not taking the pdf file which i have created above it was taking the jsp file

How to hide a list from SharePoint tree view pro grammatically.

Hi,
I have enabled tree view for a SharePoint 2013 site pro grammatically.
I want hide some specific lists from that tree view like Documents, Workflow, Task List, Calender
Lists which are created default when we create a site.
How could i do that?

I know how to hide Quick launch and Enable Tree view with properties in C#.
My question is
hide some specific lists from that tree view like Documents,
Workflow, Task List, Calender
Lists which are created default when we create a site.

How to display PDF file in OAF page

Hi All,
I have an requirement to display a PDF file in OAF page. The PDF file will be stored in custom location in unixbox and when the user clicks on the hyperlink from OAF page, the PDF file should be promted to open or save the file in the local system.
The pdf file will be stored in $XBOL_TOP and I am not sure on how to link the file directory path from OAF page.
Please share some information on how to achieve this logic.
Regards,
Ram

Hi,
Did you find a way to do this.
Please advise.
Thanks
Krishna
Edited by: user452458 on May 11, 2010 6:53 PM

How to display HTML file from Unix server on UI at runtime

Hi Experts,
My requirement is to display HTML files, related to some particular person, on UI. The file is existing on a separate UNIX server and a file related to one person may have a lot of attached files as well , as is the case generally with HTML files, including pictures etc. So it is no use transferring file on my CRM system, as the files are kept separately on this UNIX server which is particularly for this kind of storage.
I am able to show files residing on MIME repository ( I created some new HTML files ) of my CRM system on UI. but I don't know how to go ahead with this particular requirement.
One idea is that I can map one folder of my application server to that unix server so that I can see the HTML files in this particular folder. but I don't know how to map MIME repository folder to application server directory or directly to the UNIX server .
Please advise. Is my approach correct or is there any other way ?
thanks in advance.
Regards,
Vikas

Maybe this is too simple, but have you got an HTTP server on the UNIX machine? You could simply link the URL into you CRM application and display the contents directly from UNIX.
cheers Carsten

How to display the file name & status when copying files.

I write a program to backup/copy data from one directory to other directory, and I'm using File List and Runtime.getRuntime().exec("xcopy "+dir1+"\\"+name+" "+dir2+" /y");
to copy the files, so it will copy the file one by one, and everytime one file is copied, I want to display the result to the screen, but guess what has happened, the screen just display a blank screen, and wait until all the copying processes finish, then it will display all files that has been copied.
Appreciate your expertise to check my coding below.
String[] fileList = fbackupSource.list();
boolean done=true;
JTextArea backupText = new JTextArea();
JScrollPane backupScroll = new JScrollPane(backupText,
ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS,
ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
JFrame backupWindow = new JFrame("Backup Data");
backupWindow.setBounds(320,240,400,330);
backupWindow.getContentPane().add(backupScroll);
backupText.setText("Copy files from "+backupSource.toUpperCase()+" to "+backupDest.toUpperCase()+" : \n\n");
backupWindow.show();
for (int i=0; i < fileList.length; i++) {
backupText.append(" ("+ i +")... processing " + fileList);
done = copyFile(fileList[i],backupSource,backupDest);
if (done=true) {
backupText.append(" -> done. \n");
else {
backupText.append(" -> fail! \n");
boolean copyFile(String name, String dir1, String dir2) {
try {
java.lang.Process proc =
Runtime.getRuntime().exec("xcopy "+dir1+"\\"+name+" "+dir2+" /y");
proc.waitFor();
return true;
catch (IOException e) {
return false;
catch (InterruptedException e) {
return false;

Oops, sorry, I should have written "Process.getInputStream()". Here's an example from:
http://javafaq.nu/tips/opsys/index.shtml
==============
How can I pass a string to the command line(DOS) ? Also i want to capture the output given by the command line in a string.
Answer: Try this out:
// works for DOS
String cmds[] = new String[2];
cmds[0] = "dir"; // replace with "ls" on UNIX
cmds[1] = "c:"; // replace with "/" on UNIX
// execute the command
Process pro = Runtime.getRuntime().exec(cmds);
// wait until it's done executing
pro.waitFor();
// what did the process output from the Input pipe back to
// this process (okay, who named this stuff)?
InputStream out = pro.getInputStream();
// output it (really slowly)
int i;
while ((i = out.read()) != -1) System.out.println((char) i);==============
Although I don't think this example will do exactly what you want... you might have to delete the waitFor() call and just check to see when there's nothing else to read from the InputStream. It's a start, though, and the web page has a lot of similar examples of this sort of thing.
Yours,
Tom

How to display a file system in tree view

Similar Messages

Maybe you are looking for