How to display a table with rows and columns?

Hi All,
I am new to IPhone development,
In my app user has to pick date from control, I had used UIDatePicker but user cannot pick year from that. so I wanted to write my own calendar view i.e A table with 6x7 cells using UITable.
code snippet or any information on this will be appreciated.
Thanks,
Vashek

I don't believe that the UITable on the iPhone supports mutiple columns. It is just a list of table cells. Each cell can have its own subset of controls (views) and I suppose this may be one way to give you what you want. But it seems like it would almost be better just to make your own table -- a view that contains the grid of subviews -- and lay that out in the parent view.
I haven't had any experience with the UIDatePicker yet, though I can see it doesn't support year ... Why not build your own custom picker? It seems that would be a lot less hassle, and maybe more intuitive for the user, than building a full calendar view, especially if what you wanted initially was a picker anyway.
Edit: I feel bad ... I didn't read through all the modes of UIDatePicker -- it does have a mode that supports year (UIDatePickerModeDate).
Kevin
Message was edited by: JediRunner

Similar Messages

How to create table with rows and columns in the layout mode?

One of my friends advised me to develop my whole site on the
layout mode as its better than the standard as he says
but I couldnot make an ordinary table with rows and columns
in th layout mode
is there any one who can tell me how to?
thanx alot

Your friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
>

How to create table with rows and columns in HTMLB

Hello All,
Can any one tell me how to create table in HTMLB?
Regards,
Lisa.

Look at the sample BSP application SBSPEXT_HTMLB
also you can look at the below Blog..
/people/brian.mckellar/blog/2003/10/31/bsp-programming-htmlb-tableview-iterator
<i>*Reward each useful answer</i>
Raja T

How to find index name with primarykey and column on a table?

Hi,
how to find index name with primarykey and column on a table?
please help me.
Thankyou.

1 select ac.table_name, ac.index_name, aic.column_name
2 from user_constraints ac, user_ind_columns aic
3 where ac.constraint_type = 'P'
4   and ac.index_name = aic.index_name
5* order by 1,2,3
SQL> /
TABLE_NAME                 INDEX_NAME                COLUMN_NAME
ACTION_TABLE                 SYS_C0011033                NESTED_TABLE_ID
ACTION_TABLE                 SYS_C0011033                SYS_NC_ARRAY_INDEX$
CATEGORIES_TAB                 SYS_C0011038                CATEGORY_ID
CUSTOMERS                 CUSTOMERS_PK                CUSTOMER_ID
INVENTORIES                 INVENTORY_IX                PRODUCT_ID
INVENTORIES                 INVENTORY_IX                WAREHOUSE_ID
LINEITEM_TABLE                 SYS_C0011034                NESTED_TABLE_ID
LINEITEM_TABLE                 SYS_C0011034                SYS_NC_ARRAY_INDEX$
ORDERS                      ORDER_PK                 ORDER_ID
ORDER_ITEMS                 ORDER_ITEMS_PK                LINE_ITEM_ID
ORDER_ITEMS                 ORDER_ITEMS_PK                ORDER_ID
PRODUCT_DESCRIPTIONS            PRD_DESC_PK                LANGUAGE_ID
PRODUCT_DESCRIPTIONS            PRD_DESC_PK                PRODUCT_ID
PRODUCT_INFORMATION            PRODUCT_INFORMATION_PK           PRODUCT_ID
PROMOTIONS                 PROMO_ID_PK                PROMO_ID
WAREHOUSES                 WAREHOUSES_PK                WAREHOUSE_ID
16 rows selected.

How to display 2 dimensional data. i.e with rows and columns?

Hi,
I want to know how to display multiple, variable
rows and columns that are got from the database through
queries in forms.
(i,e. a Matrix of Values,something similar to an Excel Spreadsheet).
Is there a component in forms similar to JTABLE that is
available in Java through which MULTIPLE, VARIABLE
rows and columns can be displayed ?.
I am not using a base table since this data is got thru
a number of packages and procedures that are used in
Loops.
NOTE : I am using forms 6i.
Thanks
Sharath.

I've heard Grant mention adding a Grid component to the Forms toolbox. From the context I would guess this is not yet even under development, so it's not going to be available anytime soon. And not for 6i.
Sorry, APC

How to Create a Table with Merge and partitions in HANA

Hi,
What is the best way to create a Table with MERGE and PARTITION and UNLOAD PRIORITIES.
Any body can you please give me some examples.
Regards,
Deva

Ok,
1) the UNLOAD PRIORITY has nothing to do with the order of data loads in your ETL process
2) Unloading of columns will happen automatically. Don't specify anything specific for the tables, then SAP HANA will take care about it
3) Not sure where you get your ideas from, but there is no need to manually "flush" tables or anything like that. SAP HANA will take care of memory housekeeping.
4) Partitioning and how to specify it for tables has been largely documented. Just read up on it.
5) Delta Merge will happen automatically, as long as you don't prevent it (e.g. by trying to outsmart the mergedog rules)
Seriously, I get the impressions that this list of requirements is based on some hear-say and lack of actual information and experience with SAP HANA. There are a couple of extensive discussions on data loading optimization available here in SCN and on SAPHANA.COM. Please read those first.
All this had been discussed broadly a couple of times.
- Lars

Dynamic Table - Add rows and columns in same table

Hi there,
I wonder if someone could help please? I'm trying to create and table where a user can add both rows and columns (preferably with separate buttons) but am having trouble trying to figure out how to do this. Is it possible? If so how? I'm not familar with script but have found examples of seprate tables where you can add a row and then another table where you can add columns and essentailly want to merge the two but cannot make it work.
Any help much appreciated!
Thanks,
Ken

It is great example....you can learn the concepts there and apply....however you may have to think twice before you implement column adding dynamically....because the technique here is make copy of what we already have and reproduce it as a new item and this technique works great for rows as they all have every thing in common. But when it comes to columns it may have unique visible identity as column head and displaying repeatedly the same column head may not look good. Of-Course you can do few extra lines of code and change the column appearance based on users input each time. Situations where users need to add additional column is very unlikely (sure your requirement might be an exception).
Key in allowing adding/removing instances is managing design mode settings under Object>>Binding>>....and select the checkbox "Repeat <subform/row/...> for Each Data Item" and then set Min, Max and Initial count values.
Also you need to club your effots by using simple scipt with button clicks....
for the example refered in URL you posted following is what I did to make the first table allow Adding/Removing Rows....
1. Opened the form in LC designer.
2. Add two buttons AddRow & RemoveRow right next to RemoveColumn
3. For AddRow I used following JS code....
      Table1._Row1.addInstance(1);//that means any time this button is clicked a new instance of Row1 is added use _Row2 or Row3 based on your needs
      var fVersion = new Number(xfa.host.version); // this will be a floating point number like "7.05"
      if (fVersion < 8.0) // do this for Acrobat versions earlier than 8.0
       // make sure that the new instance is properly rendered
       xfa.layout.relayout();
4. For RemoveRow I used following JS code....
     Table1._Row1.removeInstance(1);//Syntax is...<objectReference>.removeInstance(<index of the repeating object that needs to be removed>); //in this case since we used 1 alwasys second object from top gets deleted.
      var fVersion = new Number(xfa.host.version); // this will be a floating point number like "7.05"
      if (fVersion < 8.0) // do this for Acrobat versions earlier than 8.0
       // make sure that the new instance is properly rendered
       xfa.layout.relayout();
5. Now time to update settings at Object>>Binding tab and set "Repeat......" and also set Min, Max and Initial count as explained above.
     Those settings needs to be updated for Row1 (or your choice of row) of the table
6. Set the Height to Expand of the Subform, where the table is housed.... this is done under Layout pallet
7. Save the PDF as dynamic template and verify the results...
If you still run into issues I can send you copy that works on my machine, but you need send me an email at n_varma(AT)lycos.com
Good luck,

How to create a table with rows within a row?

Hi,
I am trying to create a table that looks like this: https://acrobat.com/#d=XyI3rlSWMWYXQixzpRSrXA but I can't figure it out.
Please can someone tell how I should go about this?
thanks for the help.

Hi,
We you see nested tables, you have to create a table inside a table. For this first you have to merge the rows and insert a table with the number of rows requested. You can find the sample created for you below and let me know in case of any issues
https://sendnow.acrobat.com/m/g.ashx?i=rO1m-dIDzRs2FibTHDSiww&x=yrC*o4IZIVfpKgqOTbX8OQ
Thanks

How to copy a table with LONG and CLOB datatype over a dblink?

Hi All,
I need to copy a table from an external database into a local one. Note that this table has both LONG and CLOB datatypes included.
I have taken 2 approaches to do this:
1. Use the CREATE TABLE AS....
SQL> create table XXXX_TEST as select * from XXXX_INDV_DOCS@ext_db;
create table XXXX_TEST as select * from XXXX_INDV_DOCS@ext_db
ERROR at line 1:
ORA-00997: illegal use of LONG datatype
2. After reading some threads I tried to use the COPY command:
SQL> COPY FROM xxxx/pass@ext_db TO xxxx/pass@target_db REPLACE XXXX_INDV_DOCS USING SELECT * FROM XXXX_INDV_DOCS;
Array fetch/bind size is 15. (arraysize is 15)
Will commit when done. (copycommit is 0)
Maximum long size is 80. (long is 80)
CPY-0012: Datatype cannot be copied
If my understanding is correct the 1st statement fails because there is a LONG datatype in XXXX_INDV_DOCS table and 2nd one fails because there is a CLOB datatype.
Is there a way to copy the entire table (all columns including both LONG and CLOB) over a dblink?
Would greatelly appriciate any workaround or ideas!
Regards,
Pawel.

Hi Nicolas,
There is a reason I am not using export/import:
- I would like to have a one-script solution for this problem (meaning execute one script on one machine)
- I am not able to make an SSH connection from the target DB to the local one (although the otherway it works fine) which means I cannot copy the dump file from target server to local one.
- with export/import I need to have an SSH connection on the target DB in order to issue the exp command...
Therefore, I am looking for a solution (or a workaround) which will work over a DBLINK.
Regards,
Pawel.

How to fill a table with data from columns & rows from a txt file

I am trying to fill say:
Myname Myclass Mycollege
Mohan MD Stanford
from a txt file into 3 columns of a table. I can easily do it into a textarea component by
clicking a button:
try{
FileReader fr = new FileReader("F:/CreatorProjects1/stan.txt");
BufferedReader br = new BufferedReader(fr);
String s1="";
String s="";
stantxtarea.setValue(s);
while((s=br.readLine())!=null) {
s1 = s1+s;
s1=s1+"\n";
stantxtarea.setValue(s1);
br.close();
fr.close();
} catch(Exception e) {
e.printStackTrace();
return null;
All table components seem to need a database. I do not use any database. I run exe files that give output to txt files. How to solve it?
I appreciate any help in this regard...
dr.mohan rao

there may be another way. This is some thing some thing I can recommend. You can create property type of ObjectListDataProvider in session or application based on the scope you required. Create web bean class with property you want to show in the column (say col1, col2, col2). Initialize the list property like similar below
List dataList = new ArrayList();
ObjectListDataProvider mytableprops = new ObjectListDataProvider();
try {
//start loop read data from your txt file
//create instance of web bean for each line
//add web bean instance into dataList
//end of loop readind data from txt file
oldpins.setList(dataList );
oldpins.setObjectType(NotificationProfileBean.class);
} catch (Exception ee1){;}
return oldpins;
Sri Thuraisamy

How to join two tables with no similar columns

Hi all,
I have two tables as follows:
Table T1 have Attributes as follows:
GLCODE,
BRANCH,
ITEM_NUMBER,
DEMAND_DATE,
QUANTITY,
SOURCE
Table T2 have Attributes as follows:
FORECAST_DATE
Now in SQL if run the following stattement iam getting out put.
SELECT GLCODE,BRANCH,ITEM_NUMBER,DEMAND_DATE,QUANTITY, SOURCE,(SELECT DISTINCT FORECAST_DATE FROM T2) FROM T1
The above SQL Statement giving correct results for me.
The same SQL Statement how can we implement in mapping level?
Regards,
Ava

Jaap van,
>
You have to specify an outer join, but how do you do that if there is no join to begin with? I would do the following (which I didn't test yet):
add an extra column (say C_JOIN) to the T2-ingroup of the join operator and fill it with from a constant operator with say value 1. Then use T2.C_JOIN (+) = 1 as the join condition.
If every record in T2 is guaranteed to have the same value, instead of using a deduplicator, which will read all records, sort them and deduplicate them, you can use a filter with filter condition ROWNUM < 2, which only will read one record.
I am facing almost the same problem but not entirely thou and I was wondering if you have an idea how to even start.
Problem:
I got this table:SQL> desc ita.tpis32_job_status
Name Null? Type
JOBID NOT NULL NUMBER
T1_ID NUMBER
QID NUMBER
REQ_TYPE VARCHAR2(10)
SUBMIT_TIME DATE
OWNERID VARCHAR2(30)
DESCRIPTION VARCHAR2(150)
STARTTIME DATE
ENDTIME DATE
STATUS VARCHAR2(50)
ERROR_ID NUMBER
TABLE_NAME VARCHAR2(30)
SERVER_ID VARCHAR2(10)
DATABASE VARCHAR2(20)
PRIORITY NUMBER
NUM_LINES NUMBER
PROCESS_ID NUMBER
QUE_TIME NUMBER
STATUS_CODE NUMBER
ERROR_MSG VARCHAR2(500)
NUM_LINES_TS NUMBER
REMOTE_STATUS NUMBER
This the above table, i am looking for JOBID (a five digit number) like 25875.
What I want to do is add or append this five digit number to a string to find the corresponding table in dba_tables or all_tables. The only way I have try to do this is by writing PLSQL as you see from here:
Re: Use PLSQL to delete tables dynamically
When the select is writing properly, the result of the five digit number from JOBID and the string should look like the below result (job_(five digit_%).
My problem is there is no relationship between ALL_TABLES and the my own table (ita.tpis32_job_status). Any help will be appreciated.
TABLE_NAME
JOB_58871_OUTDATA
JOB_58868_TS
JOB_58868_OUTDATA
JOB_58867_TS
JOB_58867_CMDLBL_2
JOB_58867_OUTDATA
JOB_58866_TS

Help with rows and columns

Hi,
Is it posibble in oracle to display the columns in row format?
eg:
Select* from emp;
col1 col2 col3
1 mat 22
The output should be
1
mat
22
this is to be done ina single query..
Plz help..
thanks for ur help..
mathew

SQL> With t As
2    (Select 'A;B;C' c
3    From dual),
4    t2 As
5    (Select ';'||c||';' c From t)
6    Select substr(c, instr(c,';',1,Level)+1,
7                      INSTR(c, ';', 1, Level+1)- INSTR (c, ';', 1, Level)- 1) "Str"
8    From t2
9    Connect By Level < length(c) - length(Replace(c,';'))
10 /
Str
A
B
C

URGENT -- How to duplicate a table with a long column?

I am using a ddl script --
Create table ONE as (select * from TWO);
This gives error saying ONE has long column.
Any ideas.........
Darshan

If you can create the second table, you can populate it through the COPY function.
See the following testcase:
DROP TABLE one
DROP TABLE two
CREATE TABLE one
(n NUMBER
,l LONG)
INSERT INTO one
VALUES
(1
,'123'
CREATE TABLE two
(n NUMBER
,l LONG)
COPY FROM apps/apps@db TO apps/apps@db APPEND two USING SELECT * FROM one
SELECT * FROM one
SELECT * FROM two
null

Formulas results outside of row and column axis

The report has an area of row axis and column axis. This area is where the results from BW are displayed.
We have a requirement where we would have to create formulas using the BW Analyzer results of the row axis and column axis and display the results after the last row of this area.
For example, after the BW Analyzer displays the result area to the Excel, we are required to take Excel Cell D10 * C7 and put the results to B33.
<b>B33 = D10*C11</b>
Excel row 30 is the last row from the row axis result area.
I have searched through the forum for Cell Editor, but it seems that the requirement is to use 2 structures and use Cell Editor only when there is a formula collision. Our requirement has 1 structure, but I guess we can create the other structure for the column axis results. But still I think Cell Editor is a computation of formula collision within the row and column axis result area.
My question is will Cell Editor meet our requirement if we want to get formula results from the row and column axis and then display the results outside of the row and column axis result area?
Our approach was to use the Excel cell formulas in the workbook or possibly macros, but it seems that the Excel formulas will do.
Would someone clarify about the Cell editor for this requirement and how would you approach this?
Would this be effective to do the formulas from the query level? We are working on 3.5 SP11.

Can Cell editor do the following:
1. Create structures
2. Run the query
3. The results of the structures are displayed in the row and column axis of the BEx Analyzer
4. Save as a workbook
5. Use the Cell Editor to pick and choose the cells (Not the Excel cells) to create formulas
6. The formula results are then displayed outside of the row and column axis.
Would this be another approach?
What scenario can Cell editor be used? What scenario can Cell editor not be used?
Thanks

How to insert a table with variable rows in smart form

Hi all,
How to insert a table with variable rows in smart form?
Any help would be appreciated.
Regards,
Mahesh.

Hi,
Right click the mouse->create->table
If you want 5 columns, you need to declare 5 cells in one line type of the table
Click on Table -> Details, then do the following
Line Type 1 2 3 4 5
L1 2mm 3mm etc
Here specify the width of the columns as many as you want..
then in the header/main area of the table, click create Table Line, Rowtype is L1, automatically 5 cells will come,In each cell create a text element, display the variable to be printed there.

How to display a table with rows and columns?

Similar Messages

Maybe you are looking for