How to display additional items from an LOV?

Hi guys,
This is bound to be a fairly common scenario, though I didn't see it in the Forum archives. The wizard-based LOV facility provides support for one display value and one return value. But how do you display a half-dozen items from the row found in the LOV in addition to the one returned by the LOV?
FWIW, here's what I came up with. I used the wizard-based LOV to bring back the first item. Then I added a button that said "Get additional values". An "After Submit" procedure, triggered by the new button, populates the other page items with values from the database table. Then in the "After Submit" Branches section, the same page is defined as the target page, again assuming that the new button was pushed. I figured that branch would render the new values. But no. From using the Session button, I can see that the additional page items are, indeed, populated correctly. But they don't become visible on the page. What gives?
BTW, if there is a slicker/easier way to accomplish this, I'm all ears. Ideally, when the LOV returns its value, it would return all of the half-dozen additional values at the same time (no additional button to click). I look forward to your clever solutions.
BTW, I'm using Apex 4.1 and Oracle 11g. Accomplishing this in server-side code is acceptable.
Thanks much,
Kim

Thanks for the suggestion about the SkillBuilders Super LOV plug-in. I'm far from being an expert Apex developer, but I was able to install and use it very quickly. Now for the $64K question. I'm displaying a half-dozen or so columns in the LOV (which looks great). However, I'd like for every one of them to populate page items. That's the piece that I don't see how to accomplish. I read the documentation, but didn't see how to do it there. I'd very much appreciate it if you could tell me how to send those 6 LOV values to items in the page and have Apex display the values.
Thanks so much,
Kim

Similar Messages

[UIX] How To: Return multiple values from a LOV

Hi gang
I've been receiving a number of queries via email on how to return multiple items from a LOV using UIX thanks to earlier posts of mine on OTN. I'm unfortunately aware my previous posts on this are not that clear thanks to the nature of the forums Q&A type approach. So I thought I'd write one clear post, and then direct any queries to it from now on to save me time.
Following is my solution to this problem. Please note it's just one method of many in skinning a cat. It's my understanding via chatting to Oracle employees that LOVs are to be changed in a future release of JDeveloper to be more like Oracle Forms LOVs, so my skinning skills may be rather bloody & crude very soon (already?).
I'll base my example on the hr schema supplied with the standard RDBMS install.
Say we have an UIX input-form screen to modify an employees record. The employees record has a department_id field and a fk to the departments table. Our requirement is to build a LOV for the department_id field such that we can link the employees record to any department_id in the database. In turn we want the department_name shown on the employees input form, so this must be returned via the LOV too.
To meet this requirement follow these steps:
1) In your ADF BC model project, create 2 EOs for employees and departments.
2) Also in your model, create 2 VOs for the same EOs.
3) Open your employees VO and create a new attribute DepartmentName. Check selected in query. In expressions type (SELECT dept.department_name FROM departments dept WHERE dept.department_id = employees.department_id). Check Updateable always.
4) Create a new empty UIX page in your ViewController project called editEmployees.uix.
5) From the data control palette, drag and drop EmployeesView1 as an input-form. Notice that the new field DepartmentName is also included in the input-form.
6) As the DepartmentName will be populated either from querying existing employees records, or via the LOV, disable the field as the user should not have the ability to edit it.
7) Select the DepartmentId field and delete it. In the UI Model window delete the DepartmentId binding.
8) From the data controls palette, drag and drop the DepartmentId field as a messageLovInput onto your page. Note in your application navigator a new UIX page lovWindow0.uix (or similar) has been created for you.
9) While the lovWindow0.uix is still in italics (before you save it), rename the file to departmentsLov.uix.
10) Back in your editEmployees.uix page, your messageLovInput source will look like the following:
<messageLovInput
    model="${bindings.DepartmentId}"
    id="${bindings.DepartmentId.path}"
    destination="lovWindow0.uix"/>Change it to be:
<messageLovInput
    model="${bindings.DepartmentId}"
    id="DepartmentId"
    destination="departmentsLov.uix"
    partialRenderMode="multiple"
    partialTargets="_uixState DepartmentName"/>11) Also change your DepartmentName source to look like the following:
<messageTextInput
    id=DepartmentName
    model="${bindings.DepartmentName}"
    columns="10"
    disabled="true"/>12) Open your departmentsLov.uix page.
13) In the data control palette, drag and drop the DepartmentId field of the DepartmentView1 as a LovTable into the Results area on your page.
14) Notice in the UI Model window that the 3 binding controls have been created for you, an iterator, a range and a binding for DepartmentId.
15) Right click on the DepartmentsLovUIModel node in the UI Model window, then create binding, display, and finally attribute. The attribute binding editor will pop up. In the select-an-iterator drop down select the DepartmentsView1Iterator. Now select DepartmentName in the attribute list and then the ok button.
16) Note in the UI Model you now have a new binding called DCDefaultControl. Select this, and in the property palette change the Id to DepartmentName.
17) View the LOV pages source, and change the lovUpdate event as follows:
<event name="lovSelect">
    <compound>
        <set value="${bindings.DepartmentId.inputValue}" target="${sessionScope}" property="MyAppDepartmentId" />
        <set value="${bindings.DepartmentName.inputValue}" target="${sessionScope}" property="MyAppDepartmentName" />
    </compound>
</event>18) Return to editEmployees.uix source, and modify the lovUpdate event to look as follows:
<event name="lovUpdate">
    <compound>
        <set value="${sessionScope.MyAppDepartmentId}" target="${bindings.DepartmentId}" property="inputValue"/>
        <set value="${sessionScope.MyAppDepartmentName}" target="${bindings.DepartmentName}" property="inputValue"/>
    </compound>
</event>Thats it. Now when you select a value in your LOV, it will return 2 (multiple!) values.
A couple things to note:
1) In the messageLovInput id field we dont use the .path notation. This is mechanism for returning 1 value from the LOV and is useless for us.
2) Again in the messageLovInput we supply _uixState as an entry in the partialTargets.
3) We are relying on partial-page-refresh functionality to update multiple items on the screen.
Im not going to take the time out to explain these 3 points, but its worthwhile you learning more about them, especially the last 2, as a separate exercise.
One other useful thing to do is, in your messageLovInput, include as a last entry in the partialTargets list MessageBox. In turn locate the messageBox control on your page (if any), and supply an id=MessageBox. This will allow the LOV to place any errors raised in the MessageBox and show them to the user.
I hope this works for you :)
Cheers,
CM.

Thanks Chris,
It took me some time to find the information I needed, how to use return multiple values from a LOV popup window, then I found your post and all problems were solved. Its working perfectly, well, almost perfectly.
Im always fighting with ADF-UIX, it never does the thing that I expect it to do, I guess its because I have a hard time letting go of the total control you have as a developer and let the framework take care of a few things.
Anyway, I'm using your example to fill 5 fields at once, one of the fields being a messageChoice (a list with countries) with a LOV to a lookup table (id , country).
I return the countryId from the popup LOV window, that works great, but it doesn't set the correct value in my messageChoice . I think its because its using the CountryId for the listbox index.
So how can I select the correct value inside my messageChoice? Come to think of it, I dont realy think its LOV related...
Can someone help me out out here?
Kind regards
Ido

How to display RTE item in a HTML region

I have a process that is populating a hidden item with a RTE item from another page. I need to display this in its formatted state. I am using an HTML region to display this item but the page shows HTML tags instead of rendering them. I have tried both options under html region (escape special characters and plain HTML text).
Can someone please help me to display this formatted RTE item on a page? Btw...I am using APEX 4.0.
Thanks.
Ashwen
Edited by: Ashwen on Jul 26, 2010 2:23 PM

user12601765 wrote:
did you figure out how to display RTE item in a HTML region? Can you share with me how you did it?No he can't. He's not been active on this forum for over a year, and is totally unaware of your post as watches on threads only persist for a few weeks. Please stop posting follow-ups to ancient threads. Many of the participants in such threads will no longer be active on the forum (check the "recent messages" in their profiles).
Posting follow-ups to ancient threads/departed users is NOT an effective way of getting help:
<li>Other users may ignore the thread as it appears to be closed
<li>Your assumption that the questions are related may be incorrect, leading to confusion about the nature of the problem and potential solutions
<li>Watches on the thread may have expired, so the original participants may be unaware of the new post, or they may no longer be active on the forum
<li>You have no ability to mark posts as helpful or correct
Post your question as a new thread, including at least the following information:
<li>APEX version
<li>DB version and edition
<li>Web server architecture (EPG, OHS or APEX listener)
<li>Browser(s) used
<li>Links to related posts and threads using the methods in the FAQ.
Please read the FAQ and forum sticky threads for more information on using this forum effectively.
From the information in the Allow users to use Rich Text Editor to build their own HTML/Apex Page you resurrected:
>
I am a business user developing apps, so my technical skills are limited.
>
you should be considering Websheets. (See this tutorial as well.)
Also, please update your forum profile with a real handle instead of "user12601765".

What is the "Other" category under storage and how can i delete items from this?

My disc is almost full. "About this Mac" says that I have 47 GB of "Other." What is this Other and how can I delete items from this?

For information about the Other category in the Storage display, see this support article.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

My RAM is full. How can I delete items from RAM?

RAM is nearly full on MacBook. How can I delete items from RAM?

Nothing is stored permanently in RAM. I think you mean on your hard drive:
If you really meant RAM then add more RAM. Otherwise,
Freeing Up Space on The Hard Drive
1. See Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

How do I delete items from start up disk?

My start up disk is almost full. How do I delete items from it?

Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

How do I delete items from menu bar that are not part of the OS

How do I delete items from menu bar that are not part of the OS

Perhaps you could be more specific, as it is a little difficult to answer your question without any details. I can give you some general ideas though.
On my machine there are a few applications that have installed items into the menu bar - I'm assuming you are talking about the icons on the right hand side of the top bar. To remove those items, I would generally need to uninstall the program that created them. To do this varies a little from application to application.
Also, sometimes an application will have preferences that allow you choose if you want to display the item in the menu bar.
So, my general advice would be that you need to identify the application that placed the item there, and remove it from your computer. If there is an uninstall program for that application, I would run that in the first instance.
If you don't actually wish to uninstall the application, you may need to click on the item or run the application and see if there is a setting to not show the menu bar item.
Hope that helps.
Ivan

How do I delete items from my start up disk so I can download yosemite

How do I delete items from my start up disk to create enough space to download Yosemite?

You need at least 6 GBs to download the file and another 6 GBs to install it. Plus, you need at least 12 GBs free space on your hard drive.
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

How do I remove items from the cloud without losing them permanently?

My icloud storage is almost full. How do I remove items from the cloud and not lose them?

What items?
Purchased music, movies, TV shows, apps, and books do not use up your iCloud storage.
See the link below for how to reduce the amount of storage you're using:
http://support.apple.com/kb/HT4847

How do you remove items from the assets panel that are duplicated?

How do you remove items from the assets panel that are duplicated?

If you add an item to a slideshow, you'll usually see 2 entries for that image in the assets panel - one represents the thumbnail, and the other represents the larger 'hero' image.
It sounds like you may have added the same image to your slideshow twice. You can select one of the hero images or thumbnail images in your slideshow and use the delete key to remove it. Then the extra 2 entries in the assets panel should disappear.

How do you remove items from the start up disc

How do you remove items from the start up disc?

Freeing Up Space on The Hard Drive
You can remove data from your Home folder except for the /Home/Library/ folder.
Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
Also see Freeing space on your Mac OS X startup disk.

How do I remove items from the dock?

How do I remove items from the dock ?

Single click and then drag it to the desktop. It will dissapear in a puff of smoke. You also may benefit by bookmarking and using:
Find Out How Video tutorials

How do you delete items from the reading list?

How do you delete items from the reading list?

I'm trying to mark your reply as "solved my problem", but I can't see where to mark it. I tried to mark it in the email that came to me with your answer, but it went to a screen that said NOT FOUND. Help?

How do i delete items from the reading list

how di i delete items from the reading list

Swipe your finger across the item in the list and a delete button will pop up.

How can i remove items from list that have been deleted when i click on them it keeps showing empty

how can i remove items from the list that have been deleted when i click on them it keeps showing folder empty

Actually, Reader SHOULD keep showing documents that no longer exist, I disagree. It's no big deal, and people will quickly realise why they can't open the file. They open more files, the old ones move off.
The REASON why it should not check is that checking whether a file exists can take a long time when things aren't good. For instance if a file server goes down, or a memory card is unplugged. That in turn would mean delays opening the File menu, and I've seen some software that can sit there for several minutes. That would really give people something of which to complain...

How to display additional items from an LOV?

Similar Messages

Maybe you are looking for