How to display all reversal document ?

Dear all,
When reversal document with negative posting, the balance is return 0. So, how can i display all the reversal documents for reporting ?
Thank you very much,
Sylvecast.

Sylvecast,
You may have to elaborate a little more on what you are trying to accomplish. Let me add what I can based on my experience. When a document is posted in a GL account for instance, the balance and activity on the acccount can be seen and displayed by using FS10N or FBL3N respectively. If documents are reversed (posting opposite entries) the original balance will return to zero but even though the balance is zero, the activity of both the original and the reversal documents can still be displayed using FS10N (and double clicking the period to see the activity) or FBL3N.
Or, are you asking for a way to display all revesal documents created?

Similar Messages

  • Query to display all the documents

    Hi
    How to display all the document numbers (quotations, orders, invoices etc), posting dates in three columns i.e. Cust Code, Doc No , Posting Date?
    Since all the tables storing this information having the same column names do you think it is possbile? then how to write a query?
    thanks
    SV Reddy

    SV,
    what Raja said is correct. The steps are to write the query the fields you want to display in the query, so it will be as follows:
    select docnum, cardcode, doctotal, objtype from ORDR
    then use UNION ALL, the union all is used to join the other tables e.g. purchase, good receipt or good issue to the above sales order query but must have same fields.
    It will be as this follows:
    select docnum, cardcode, doctotal, objtype from ORDR
    union all
    select docnum, cardcode, doctotal, objtype from OPOR
    union all
    select docnum, cardcode, doctotal, objtype from OIGN
    union all
    select docnum, cardcode, doctotal, objtype from OIGE
    since the result objtype here is a value, I use "case when" to display objtype in the words and user can understand the document name.
    It could be mixed in all the 4th queries and will not give error result.
    Rgds,

  • NOT WORKING -How To Display All Comments for a Planning Package

    Hi All,
    I am using How to Document "How To Display All Comments for a Planning Package" to display comments for list of "cost center" against different "fiscal/year" for Key Figure "Budget Amount".
    Below is how the Layout looks like where comments are posted against Cost Center- year combination.
    Cost Center                          2007     2008     2009     2010     2011
    3          2.00     2.00     2.00     2.00     2.00
    4          2.00     2.00     2.00     2.00     2.00
    6          2.00     2.00     2.00     2.00     2.00
    7          2.00     2.00     2.00     2.00     2.00
    This case is very similar to the example given in how to document but after following all the steps correctly in the document and also followings various forum links such as below , I am not able to display the comments for list of Cost Centers.
    "How to...BSP display comments"...problem with row comment
    Below are the issues being faced:
    1) When i save the comments , the icon for comments (indicating that some comments have been entered) is not shown against selection of Cost Center-Year although the comment is saved.Comment are  also visible in BPS0.
    2) On execution "Web interface could not be loaded" - is the message that is shown in the area where BPS application should show all the comments.
    Highly Appreciate any help with issues mentioned above.
    Kind Regards,
    Robin Johri

    Hello Robin,
    1) please check if you set the row/cell selection property correctly for the layout component in the web interface.
    2) the error does not make sense since the comments are displayed in an iframe using a BSP application, not a web interface. Check the URL in the HTML text component.
    Regards,
    Marc
    SAP Techology RIG

  • I have file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method?  alternate method? I have Adobe Ac

    I have pdf file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method?  alternate method? I have Adobe Acrobat X Pro and Windows -7 platform.

    Yes, I just want to cover up all the pages for those particular area of document numbers.
    Nothing sensitive about it. I just want to show the correct document numbers on all pages in print out.
    So, I wanted to cover up by comments, but commenting on each page will be difficult. So, I wanted to comment the same on all pages.

  • How to display All User Logged in time & Logout Time?

    How to display All User Logged in time & Logout Time?
    Hi..
    I want to display All user who logged in the portal,
    their username,
    their time logged in,
    their time logged out..
    where can i find these information?
    do Portal have already something like this?
    Plz advise..Thanks.

    The login information is in the wwlog_activity_log. The logout action is only logged when it is explicit. I am using the last user action time for the logout time so I can determine the duration of the visit.

  • How to display all tables residing in my database

    i'm using 10g express edition.
    i'm developing a .net application using oracle
    i want display table infomation in a datagrid
    for that i need to select tables fromthe database using the interface given by them
    in that i found server name field.....what it actually means?
    also how to create a new database in 10g and how to display all tables residing in the database?
    pls help me
    thanking u
    chaitanya

    user11359516 wrote:
    i want display table infomation in a datagrid
    select owner||'.'||table_name owner_table_name
      from all_tables   
    user11359516 wrote:in that i found server name field.....what it actually means?i'm not sute what you mean by server name field? if you refer to table column name see this code below:
    select owner||'.'||table_name||'.'||column_name table_column_name,
           decode(data_type,'VARCHAR',data_type||'('||to_char(data_length)||')',
                            'VARCHAR2',data_type||'('||to_char(data_length)||')',
                            'NUMBER',decode(data_scale,0,data_type||'('||to_char(data_precision)||')',
                                                      null,data_type,
                                                      data_type||'('||to_char(data_precision)||','||to_char(data_scale)||')'),
                            data_type) type,
                            nullable
      from all_tab_cols
    order by table_name, column_id

  • How To… Display All Comments for a Planning Package

    Hi,
    I have the How-to guide mentioned in the subject and have now moved onto BI7. Is the guide still applicable in BI7 and how would I go about implementing the above How-to in IP instead of BPS?
    Thanks,
    Ale

    Thanks Marc.
    I will use BW-BPS for the time being as I've seen screenshots of the solution in the how-to. Still need to answer the question here:
    How To. Display All Comments for a Planning Package
    As I have no idea how to achieve the functionality detailed in the thread above.
    Thanks for your time Marc,
    Regards,
    Ale

  • How to display all the questions of a survey in a page?

    How to create multiple surveys in a survey list?How to display all the questions in a page and provide feedback button for each question?While giving the feedback user can ab. to see posted question date and posted person name.
    sindu

    Hi,
    To display all the questions in a page instead of in a dialog, you can achieve it by using such an URL:
    http://yoursite/Lists/survey1/NewForm.aspx?IsDlg=0
    You can add a hyperlink with this URL into a page of your site, then you can navigate to the questions page by clicking this hyperlink.
    About how to add a hyperlink into a page:
    http://sharepoint.stackexchange.com/questions/55543/how-to-add-a-hyperlink-anchor-in-a-sharepoint-wiki-page
    If you have several questions to ask, it is recommended to post them into every single thread to make others easier to focus on one question in one thread.
    Feel free to reply if there is still any questions.
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

  • How to save all open document in png 24 by javacsript

    how to save all open document in png 24 by javacsript

    yeah, i can definitely see how it would be useful for some
    people! and
    hey, for all i know, i'm the one who's not an average user. i
    was
    pretty much just saying that i can see how that's something
    Firefox
    would think to do, but not necessarily a program like
    Dreamweaver. but i
    agree that it would be a useful feature in lots of programs.
    and i think
    that what Murray suggested is probably pretty close to what
    you're
    looking for, if not exactly.
    d_macman wrote:
    > To respond to both...
    >
    > courtney (n h c)... I must not be the average user then.
    We have many sites,
    > and I do a LOT of development, and many times, I may
    have several pages with
    > several includes on a page. IE, for a form page, I may
    have 10-12 pages total
    > (including headers, footers, java, PHP process pages,
    etc) and to work out the
    > processes and for development, I may create several
    versions depending on the
    > problems I run into.So to not go nuts, I would LOVE to
    save the batch of pages
    > out, and then be able to re-open them all at once.
    Making it easy to jump in an
    > out of a test section (I have them saved in a site, and
    dont want to make
    > second sites just for this purpose).
    >
    > Not to mention, leaving work and coming back in and
    finding out the power went
    > out over the weekend and my machine shutdown (and yes, I
    have a UPS, but it
    > wont run the system for that long).
    >
    > So, you see why I would like to save them as batch, like
    Firefox, way easier.
    >
    > Murray *ACE* ...
    >
    > I will try that, I did not even know that was there. Way
    cool ! I hope it
    > works, especially for power outages, like I mentioned
    above!
    >
    > Thanks all,
    >
    > Don
    >
    >

  • How to display all the surveys using content query web part

    Can you please tell me how to display all the surveys using content query web part in more details? I also created a subsite and multiple surveys in that site. Then, I inserted a Content Query Web Part and select the List Type to be "Survey",
    however, it returned nothing. Did I miss anything?

    Hi,
    OOTB Survey List does not contain any
    Content Types and it has the following structure:
    Response entry is represented by
    List Item
    Response entry consist of questions and answers, where Question correspond to
    Field and Answer to Item value respectively.
    For querying Survey List via CQWP  the following properties could be used
    BaseType 
    <Lists BaseType="4">
    ServerTemplate
    <Lists ServerTemplate="102">
    Example
    To retrieve all the responses from Survey lists, specify List Type property as shown on picture
    Reference:
    http://stackoverflow.com/questions/17280778/display-all-surveys-using-content-query-web-part
    Best Regards,
    Eric
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to display  all the under menus options when pressing the main menu on adobe muse?

    How to display  all the under menus options when pressing the main menu on adobe muse?

    How to display  all the under menus options when pressing the main menu on adobe muse?

  • How to find all Hypercard documents in Leopard?

    When I upgraded to a Mac Pro from a G4, I lost my ability to work with Hypercard (I do use Sheepshaver occasionally, but it crashes frequently). I recently purchased Supercard, in order to be able to continue to work in a Hypercard-like environment (and it works great), but I have to convert my Hypercard projects and stacks to Supercard format.
    I have several old Hypercard documents scattered throughout my mac's hard drives, and want to be able to find them all using Leopard's find abilities. However, I have discovered that (unlike in Tiger), Leopard cannot search by Creator Code or file Type Code, only by "Kind". When I try to search by "Kind" for "HyperCard" or "Hypercard Document" (Leopard displays the latter in the Get Info box for a Hypercard stack), I get no results. It works for "Microsoft Excel", but not for Hypercard.
    None of content, size or date help work; there is a wide range of stack sizes and date (I was working on various projects from the late 1980s through last year). Content varies widely as well.
    Any ideas on how I can find all Hypercard stacks on my drives? Perhaps there is a 3rd party tool that allows me to do this (I've searched with no luck on this front yet).
    Thanks!

    I tried this and it works as you describe, but not all Hypercard documents appear to have the same content type, as described by Terminal.
    The first Hypercard stack I tried came up with the content type:
    dyn.ah62d4rv4ge8xe6u
    The search only found the one result with this type (the same stack).
    Then I tried using the Hypercard "Home" stack (a pretty central stack to Hypercard's functioning), and it had a content type:
    dyn.ah62d4rv4gk8zgzcbmq
    (note the type is longer with a different ending; only the first 14 characters are identical to the first stack).
    This search found 317 items, which is likely most of my Hypercard documents, so this is some progress.
    Unfortunately I know that since the first stack I tried had a different content type, there may be other Hypercard stacks on my hard drive with yet a different content type, not caught by these searches.
    I then tried a wildcard, thinking that if only the first 14 characters of the content type are identical, I focus my search on those characters only, using asterisk as a wildcard at the end. So I searched for:
    dyn.ah62d4rv4g*
    The result was 526 hits, including many documents that are not Hypercard. So this doesn't help.
    It appears that the content type is not exactly specific to a the File Type or Creator Code, so while I can find many of a particular document, this method cannot find all of one type of document.
    I tried searching using raw query by the Terminal-reported File Type Code (kMDItemFSTypeCode= "STAK"), but this revealed no items.
    Perhaps I should suggest this to Apple as a bug fix for Leopard, to restore the ability to search by Type Code or Creator Code as a choice in the OS Find service? I know these codes are no longer relied on as much as they used to be, since now the OS uses extension as much as anything else, but there is lots of older software that still run in Leopard that use Type and Creator codes. And Apple still recommends registering the creator code of any new software.
    Thank you!

  • How to display all important keys in the menu at runtime...?

    Dear All.
    I need a urgent help from forms guru's,my requirement is i need to display all the necessary keys on the menu option i.e keys(if you press ctrl+F1) at forms runtime.if you see only un necessary keys are displayed instead of the very basic keys like Enter Query and Execute Query. how can i display those keys. see the below unwanted keys which showing default.
    Function Key
    Cancel Esc
    Clear Field/ITem Ctrl+u
    Delete Backward Delete
    Delete Backward Backspace
    Display Error Shift+F1
    Left Left
    Return Enter
    Right Right
    Show Keys Ctrl+F1
    i have tried numurous way to do so but at last i cound't.
    i need to display something like
    Enter Query F7
    Excute Query F8
    Sace F10
    it would be great if anyone can give me the idea. i have refered many document and i have changed all the posibilities in frmusw.res file through terminal.
    Thanks in Advance

    Matthew,
    Please see this post:
    https://discussions.apple.com/message/24421822#24421822

  • How to display Sales Order Document No into Invoice  ALD document

    Hi everyone
    I need to know how to bring in the sales order number into a UDF on a sales invoice which i will then pull into the invoice document using ALD.The client creates a sales order and copys into a delivery and THEN copys into an Invoice therefore it loses the original base number
    SBO only displays the delivery number into the invoice and the sales number in the delivery - it will not take the sales order all the way into the invoice.
    I can see that it brings it into the remarks field but this also brings in text, which i dont want displaying in ALD document.
    can anyone help either with a formatted search or if you know how i can strip out the text from the remarks field.
    any suggestions will be much appreciated
    Thanks

    You can use the next query:
    Select o.DocNum
    From DLN1 d
    Join ORDR o On o.DocEntry=d.BaseEntry and d.Linenum=0
    Where d.DocEntry=$(INV1.BaseEntry)
    (You should replace the ')' with '']' and the '(' with  '[')
    But this is usable only when the user derives the invoice from one delivery and the delivery from one order.

  • How to display all data on one page in web app

    Hello.
    So I have web app JSF (IceFaces framework) + JBoss all Crystal Report working perfectly. So I have page with Crystal Report tags (e.g.
    <bocrv:reportPageViewer reportSource="#{crystalReport.reportPath}" ...
    in this report I have table with some data (data from DB) and I want to display this data on one page. Unfortunately now this data are moving to the next page and unfortunately I even donu2019t know how switch to the next page (I see only info e.g. 1with 2).
    So how to display this data on one page if its impossible how to torn on pagination.

    So I canu2019t do this, I canu2019t display all data on one page (until Iu2019m using JSF tags)?
    In JSF tags Iu2019m setting only path to file. In my bean Iu2019m using u201CReportClientDocumentu201D object itu2019s easy way to load report file (u201Copenu201D method) and set parameters (u201CgetDataDefController().getParameterFieldController()u201D method) and also connect to data base (u201Clogonu201D method) but I havenu2019t this property u201CsetSeparatePages(boolean)u201D.
    Maybe Iu2019m doing this wrong and there is a simpler way maybe I can use somehow u201CCrystalReportVieweru201D please give my any advice.

Maybe you are looking for