How to display amount in words for subtotal value?

Hi All,
I am diplaying a amount in words for sub-total value after each document number.
Can any one suggest how to display text for sub-total value not for Grand total?
I want subtotal at each material for each document number and want to display that subtotal amount in words.
Thanks and Regards
Steve

Thanks Jorge ,
Is it possible in ALV printing Sut-total text by adding a new line .?
And where to insert At new or on-chane ?
Sub-total calculating automatically not programaticall..
Regards
Steve

Similar Messages

How to display amount in words in the last page

Hi,
I am very new to Oracle Report, but v.good experience in Crystal report.
How can i display amount in words for an invoice amount total in the last page of the invoice and after total amount. I created a new non repeating frame and put the amount in words inside that, and set the frames diplay property Print on Last Page, but the problem is already there is a repeating frame to print all the invoices item, and the total in figure. But the amount in words frame is not always coming after the total amount,either it should be at the bottom of the last page in fixed position, otherwise it should move just below the total amount.
I am using Oracle 11g.
Thanks in advance...
Fsl

Hi ,
Use This function
create or replace FUNCTION xxg4_zen_conv_words (p_amount IN Number) RETURN Varchar2 IS
--Creation Date   : 11-DEC-2009
--Purpose         : This Function returns amount in words.
--Parameters      :
--1) p_amount : Only positive and negative values are allowed.
Precision can be entered upto 10 digits and only 2 scales
are allowed e.g 9999999999.99
-- Index by Tables to store word list
TYPE typ_word_list IS TABLE OF Varchar2(200) INDEX BY BINARY_INTEGER;
t_typ_word_list typ_word_list;
TYPE typ_word_gap IS TABLE OF Varchar2(200) INDEX BY BINARY_INTEGER;
t_typ_word_gap typ_word_gap;
-- Local Variables
v_amount Number := p_amount;
v_amount_length Number;
v_words Varchar2(10000);
v_point_found Varchar2(1) := 'N';
v_point_value Number;
BEGIN
/*Getting value after point if found */
v_point_value := SUBSTR(v_amount,(INSTR(v_amount,'.',1) + 1),2);
/*Checking whether amount has any scale value also */
v_point_found := CASE WHEN (INSTR(v_amount,'.',1)) = 0 THEN 'N'
WHEN (INSTR(v_amount,'.',1)) > 0 THEN 'Y'
END;
/*Converting amount into pure numeric format */
v_amount := FLOOR(ABS(v_amount));
v_amount_length := LENGTH(v_amount);
t_typ_word_gap(2) := 'and Paise';
t_typ_word_gap(3) := 'Hundred';
t_typ_word_gap(4) := 'Thousand';
t_typ_word_gap(6) := 'Lakh';
t_typ_word_gap(8) := 'Crore';
t_typ_word_gap(10) := 'Arab';
FOR i IN 1..99
LOOP
t_typ_word_list(i) := To_Char(To_Date(i,'J'),'Jsp');
END LOOP;
IF v_amount_length <= 2
THEN
/* Conversion 1 to 99 digits */
v_words := t_typ_word_list(v_amount);
ELSIF v_amount_length = 3
THEN
/* Conversion for 3 digits till 999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,1))||' '||t_typ_word_gap(3);
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,2,2));
ELSIF v_amount_length = 4
THEN
/* Conversion for 4 digits till 9999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,1))||' '||t_typ_word_gap(4);
IF SUBSTR(v_amount,2,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,2,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,3,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,3,2));
END IF;
ELSIF v_amount_length = 5
THEN
/* Conversion for 5 digits till 99999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,2))||' '||t_typ_word_gap(4);
IF SUBSTR(v_amount,3,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,3,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,4,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,4,2));
END IF;
ELSIF v_amount_length = 6
THEN
/* Conversion for 6 digits till 999999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,1))||' '||t_typ_word_gap(6);
IF SUBSTR(v_amount,2,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,2,2))||' '||t_typ_word_gap(4);
END IF;
IF SUBSTR(v_amount,4,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,4,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,5,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,5,2));
END IF;
ELSIF v_amount_length = 7
THEN
/* Conversion for 7 digits till 9999999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,2))||' '||t_typ_word_gap(6);
IF SUBSTR(v_amount,3,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,3,2))||' '||t_typ_word_gap(4);
END IF;
IF SUBSTR(v_amount,5,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,5,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,6,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,6,2));
END IF;
ELSIF v_amount_length = 8
THEN
/* Conversion for 8 digits till 99999999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,1))||' '||t_typ_word_gap(8);
IF SUBSTR(v_amount,2,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,2,2))||' '||t_typ_word_gap(6);
END IF;
IF SUBSTR(v_amount,4,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,4,2))||' '||t_typ_word_gap(4);
END IF;
IF SUBSTR(v_amount,6,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,6,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,7,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,7,2));
END IF;
ELSIF v_amount_length = 9
THEN
/* Conversion for 9 digits till 999999999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,2))||' '||t_typ_word_gap(8);
IF SUBSTR(v_amount,3,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,3,2))||' '||t_typ_word_gap(6);
END IF;
IF SUBSTR(v_amount,5,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,5,2))||' '||t_typ_word_gap(4);
END IF;
IF SUBSTR(v_amount,7,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,7,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,8,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,8,2));
END IF;
ELSIF v_amount_length = 10
THEN
/* Conversion for 10 digits till 9999999999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,1))||' '||t_typ_word_gap(10);
IF SUBSTR(v_amount,2,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,2,2))||' '||t_typ_word_gap(8);
END IF;
IF SUBSTR(v_amount,4,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,4,2))||' '||t_typ_word_gap(6);
END IF;
IF SUBSTR(v_amount,6,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,6,2))||' '||t_typ_word_gap(4);
END IF;
IF SUBSTR(v_amount,8,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,8,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,9,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,9,2));
END IF;
END IF;
IF v_point_found = 'Y'
THEN
IF v_point_value != 0
THEN
v_words := v_words||' '||t_typ_word_gap(2)||' '||t_typ_word_list(CASE WHEN LENGTH(SUBSTR(p_amount,(INSTR(p_amount,'.',1) + 1),2)) = 1 THEN SUBSTR(p_amount,(INSTR(p_amount,'.',1) + 1),2)||'0'
WHEN LENGTH(SUBSTR(p_amount,(INSTR(p_amount,'.',1) + 1),2)) = 2 THEN SUBSTR(p_amount,(INSTR(p_amount,'.',1) + 1),2)
END);
END IF;
END IF;
IF p_amount < 0
THEN
v_words := 'Minus '||v_words;
ELSIF p_amount = 0
THEN
v_words := 'Zero';
END IF;
IF LENGTH(v_amount) > 10
THEN
v_words := 'Value larger than specified precision allowed to convert into words. Maximum 10 digits allowed for precision.';
END IF;
RETURN (v_words);
END xxg4_Zen_Conv_Words;
--Thanks
SAGAR SANKPAL

How to display the MS word, powerpoint document in portal?

Hi,
How to display the MS word, powerpoint document in portal?
Regards,
MrChowdary

Hi Chowdary,
I think, you can't do this using iview templates. But you can do this using portal component iview. For that, you have to write one java program which should read the contents of the input file and displays in the internet browser itself.
Regards,
Venkatesh. K
/* Points are Welcome */

How do you highlight typed words for a calendar event

how do you highlight typed words for a calendar event on ical?

See this plugin in for APEX 4.x applications..:http://www.apex-plugin.com/oracle-apex-plugins/dynamic-action-plugin/clarifit-report-instant-search_98.html
Next time please help us help you.. Post the following information:
APEX Version
Database Version
Browser Version
Thank you,
Tony Miller
Webster, TX
On the road of life...There are 'windshields', and there are 'bugs'
(splat!)
"Squeegees Wanted"
If this question is answered, please mark the thread as closed and assign points where earned..

How to display the contents of the database values which are retrived.

how to display the contents of the database values which are retrived in servlets and i am able to display the contents in the servlets and if forward to jsp using requestdespatcher,the values are to be shown in jsp one below the other.please suggest me in these........the servlet code is as shown
while(rs.next()){
                    buffer.append(rs.getString(1));
                    buffer.append(rs.getString(2));
                    buffer.append(rs.getString(3));
                    buffer.append(rs.getString(4));
                    buffer.append(rs.getString(5));
                    buffer.append(rs.getString(6));
                    buffer.append(rs.getString(7));
                    buffer.append(rs.getString(8));
                    buffer.append(rs.getString(9));
                    buffer.append(rs.getString(10));
                    request.setAttribute("result1",buffer);
                    RequestDispatcher rq=request.getRequestDispatcher("/results.jsp");
                    rq.forward(request,response);
in jsp iam using the getAttribute to retrieve the values as shown
<% StringBuffer sb=(StringBuffer)request.getAttribute("result1"); %>
<%= sb %>
but getting the results in the stretch,i need to display the result one below the other.

if you load it all into the buffer that is going to be very difficult. I would suggest loading it into some sort of collection. I like using an ArrayList.
Then pass the arraylist.
you will then on the jsp iterate through the arrayList using what every you want.. el, logic tags, scriplets.
so something like
ArrayList arrayList = new ArrayList();
while(rs.next()){
arrayList.append(rs.getString(1));
//or possibly an arrayList of String arrays
//maybe using nested for loops. Inner for loop adds result to string[] then //outer adds string[] to arrayList.
//can be done any number of ways based on your expected result set.

How to display the proxy settings for a specific group of servers in an OU ?

Hi,
Can anyone here please assist me in how to display the value of Proxy server settings from the computers in a specific OU member ?
$Computers = Get-ADComputer -Filter * -SearchBase "OU=Terminal Servers,OU=Servers,DC=domain,DC=com" | Where-Object { Test-Connection $_.Name -Count 1 -Quiet }
ForEach ($Computer in $Computers) {
| Export-csv "C:\Proxy-Setting-Results.csv" -Append -NoTypeInformation -UseCulture
I've done similar script for some other task but not sure how to do this for Proxy setting.
Thanks.
/* Server Support Specialist */

Proxy settings are not set in Active Directory
The below code works for 2003 servers and Win XP
$colItems = get-wmiobject -class "Win32_Proxy" -namespace "root\CIMV2" `
-computername $env:computername
foreach ($objItem in $colItems) {
write-host "Caption: " $objItem.Caption
write-host "Description: " $objItem.Description
write-host "Proxy Port Number: " $objItem.ProxyPortNumber
write-host "Proxy Server: " $objItem.ProxyServer
write-host "Server Name: " $objItem.ServerName
write-host "Setting ID: " $objItem.SettingID
write-host
You can try checking the registry values- Works in 2008 + and Windows 7
Get-Item 'HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings'
or use netsh
netsh winhttp show proxy -r <remotemachinename>
Regards Chen V [MCTS SharePoint 2010]

How to display all available data for KFs from different Cubes

Hi,
I am using a MultiProvider that consists of two InfoCubes. KF1 uses Cube1, KF2 uses Cube2 - characteristic Country exists in both cubes. I have the following data:
KF1 - Country 1: 5
KF1 - Country 3: 8
KF1 - Country 4: 10
KF2 - Coutnry 1: 9
KF2 - Country 2: 7
KF2 - Country 5: 3
I have a query that uses Country as a drilldown characteristic (ROWS) and displays the values of KF1 and KF2 (COLUMNS) for each Country. However, instead of seeing data for Countries 1-5 I only see data where I have results for KF1 (Countries 1,3 and 4). The value for Country 1 for KF2 shows up correctly in the corresponding row, but Countries 2+5 aren't displayed for KF2. If I change the Access Type for Result Values from "Posted Values" to "Master Data" I get the correct result. However this is not feasible in the final setting due to the amount of data that has to be handled (MasterData setting will lead to crashes of the query due to maximum number of cells exceeded).
Are there any other options to force the query to display values for all characteristic values where I have data for any KF?
Thanks a lot for your help!
Best regards,
David

As it turned out the issue was due to 2 restrictions on KPI2:
1) Restriction to InfoProvider "Cube 2"
2) Constant selection on two characteristics that have filters on a global level but which should not affect the display of the data for KF2
Removing (1)+(2) provided the desired result.

How to display the 'language code' for language dependent 'Short text' ?

Hi,
I am new to BW.
Can somebody help me with the following issue?
I have an attribute 'Material category description' and I chose short text exists and made it language dependent. I had loaded the master data successfully.
Now I want to know how to check the 'language code' for this material category description. When I display the data, will the language code display by defalult?
I had checked the text table using SE11
It displays the following fields over there.
/BIC/TS1_MCT_DS   [ /BIC/TS1(InfoObject name) ]
LANGU
TXTSH
I appreciate your help!
Thank you
Sekhar

Dinesh,
I went to RSD1 -> info-object -> Master Data/text tab. It shows my language selections there (Short text selected, language time dependent etc.) with everything grayed out.
In SE16, I could display the data in the following format.
/BIC/ST_PRID                TXTSH                 TXTMD
P01                                   umbrella                 rainyday
P02                                  tent                         waterproof
etc.
I want to see the 'language code' as one of the columns in this table.
Can you help me do that?
Thank you,
Sekhar

Adobe Caslon Pro generates enormous PDF files on Mac Word, displays incorrectly on Word for Windows

Had a terrible experience trying to typeset my first document with Adobe Caslon Pro in Word. In Word Mac, 27 page all text document rendered to 70 MB PDF with Opentype features enabled, well under a megabyte with Opentype features disabled in compatibility settings for the same font. Opening same document in Word for Windows (both 2010 and 2013) displayed with incorrect (increased) line spacing and Opentype features (e.g. ligatures) disabled even though they were enabled in compatibility setting (they showed up when I opened the same document in Mac).

Something definitely doesn't sound right here.
We are not aware of any problems using Adobe Caslon Pro with Microsoft Word 2011 on the Macintosh.
Attached is a sample Word document that I created using Word 2011 (with all latest updates from Microsoft), four styles of Adobe Caslon Pro with all OpenType features enabled.
I created a PDF file using “save as PDF” from Word's own “save” dialog, also attached.
I also created a PDF file from the “print” dialog using the “save as Adobe PDF” function (lower left corner of the dialog box), also attached.
In terms of functionality, I don't see the problems you are experiencing. The only difference between the generic PDF and the Adobe PDF appear to be optimization of the fonts embedded in the PDF files.
In terms of cross-platform compatibility, with Microsoft Word, Excel, and Powerpoint, forget about it. Font handling is problematic when you go beyond simple typography and fonts that have only four faces - regular, italic, bold, and bold italic. The cross-platform compatibility problems really have nothing to do with Adobe fonts themselves.
- Dov

Funtion to write numeric amount in words for printing cheques

Need to create a report to print cheques. The numeric amount of the cheque needs to written in words also on the line below the payee's name.
eg. $100 = "One hundred"
I would like to know if there is a function to do this task.

Hi,
Kumar query is right but it will only work for the values between 1 and 5373484.
Navneet Jain
[email protected]

How can I get MS word for my mac?

How can I get ms word on for my mac?

You're going to need to go buy it from somewhere. MS may sell a digital version of MS Office that you can buy and download or you may need to find the boxed software for a Mac somewhere.

How to display RFC-Logon-Screen for non trusted connection in Web-Dynpro?

Dear Web-Dynpro-Specialists,
i got a issue while creation of an WebDynpro-Tool, which is using RFC connections for reading data.
In some cases the RFC connection is not a trusted one connection, so a login is nessessary, but in
this cases not a window is coming up for login....
Any idea how i can get this window for login, in order to collect the nessessary Data for my tool?
Additional Information concerning the RFC connection:
While running my Web-Dynpro i run this Method:
METHOD get_table_entries.
CLEAR rt_entries[].
CALL FUNCTION 'RFC_GET_TABLE_ENTRIES'
DESTINATION iv_destination
EXPORTING
gen_key = iv_table_key
table_name = iv_table_name
TABLES
entries = rt_entries
EXCEPTIONS
internal_error = 1
table_empty = 2
table_not_found = 3
OTHERS = 4.
CASE sy-subrc.
WHEN 1.
RAISE internal_error.
WHEN 2.
RAISE table_empty.
WHEN 3.
RAISE table_not_found.
WHEN 4.
RAISE unknown_error.
ENDCASE.
ENDMETHOD.
Thanks a lot in advance
Best regards
Carsten Klatt

Hi!
You can use the function module RFC_MODIFY_R3_DESTINATION to create, modify and delete RFC connections. You will need the system ID (e.g. ABC), client (e.g. 123), system number (e.g. 00) and the host name of the server. In this example the following code would create or modify the RFC destination ZRFC_DESTINATION.
    CALL FUNCTION 'RFC_MODIFY_R3_DESTINATION'
      EXPORTING
        destination                = 'ZRFC_DESTINATION'
        action                     = 'M'
        systemid                   = 'ABC'
        systemnr                   = '00'
        server                     = 'serverhostname'
        language                   = sy-langu
        client                     = '123'
        user                       = 'USERNAME'
        password                   = 'PASSWORD'
        description                = 'Dummy RFC Connection'
      EXCEPTIONS
        authority_not_available    = 1
        destination_already_exist = 2
        destination_not_exist      = 3
        destination_enqueue_reject = 4
        information_failure        = 5
        trfc_entry_invalid         = 6
        internal_failure           = 7
        snc_information_failure    = 8
        snc_internal_failure       = 9
        destination_is_locked      = 10
        OTHERS                     = 11.
With the following code you can delete this connection:
    CALL FUNCTION 'RFC_MODIFY_R3_DESTINATION'
      EXPORTING
        destination                = 'ZRFC_DESTINATION'
        action                     = 'D'
      EXCEPTIONS
        authority_not_available    = 1
        destination_already_exist = 2
        destination_not_exist      = 3
        destination_enqueue_reject = 4
        information_failure        = 5
        trfc_entry_invalid         = 6
        internal_failure           = 7
        snc_information_failure    = 8
        snc_internal_failure       = 9
        destination_is_locked      = 10
        OTHERS                     = 11.
Please keep in mind that deleting an RFC connection is usually noted in the system log.
If you want to reuse your connection for multiple servers, you could run into trouble since connection data is cached.
Sincerely,
Stefan

How to display a Hierarchy node for level 2 without parent and description

Hi,
How to display a node at level two at the query the first node is CLASS where hierarchy is maintained and the second node is
subclass where hierarchy is not maintained, Now I want to display the subclass in the row where it has to display its child node in one column & text in the other.

Hi,
I dont think this would be feasible to display in different columns.
-Vikram

BI-IP How to display doc/comments links for InfoProviders in other Query.

Hi All,
We are using standard document feature to store document/comment about the plan data shown in the planning query. Relevant characteristics have the property 'characteristics is document attrib' turned on/selected for this purpose.
Finally the comments attaching absolutely correct. But I can`t display icon- "Document links for InfoProvider " in the cell and attached document in any another query. Besides that query, where this comment was attached.
This problem is described in SAP Library ( Link:[http://help.sap.com/saphelp_sem40bw/helpdata/EN/a6/607e3ddf01910fe10000000a114084/frameset.htm]).
Please, help me delete dependence of relevance in the query.

Hi,
if the documents don't appear in other queries, then the characteristic values that the documents are linked to are most likely different. Check the values in RSA1 > Documents.
Also understand that in 7.0 there are now two possible document repositories:
http://help.sap.com/saphelp_nw70/helpdata/en/42/594e3c6bf4233fe10000000a114084/frameset.htm
A migration might be required for historical documents:
http://help.sap.com/saphelp_nw70/helpdata/en/43/c1475079642ec5e10000000a11466f/frameset.htm
Regards,
Marc
SAP NetWeaver RIG

How to show underline and overline for subtotal and total row in Cross tab

Hi,
I am developing cross tab report where i need to show undeline and overline in data for subtotal row and total row so as to distuingish normal rows from subtotal and total row.
Thanks,
Mahesh

Hi BIPuser,
i looked at the updated template, we need undeline on the data corresponding to subtotal row for ex. row 2.
We have xml tag in xml data UNDERLINE_AFTER='Y' and UNDERLINE_BEFORE='Y' then we need to show underline and overline on data i.e on 121,122,123,221,222,223 ,not on ROW2.
value1 value2
row1 200 300
row2 400 700
we need underline and oveline on data 400 and 700 since it is subtotal data based on condition UNDERLINE_AFTER='Y' and UNDERLINE_BEFORE='Y'.
Hope you understand.
Please help!!!!!!
Thanks,
Mahesh
Edited by: user13450806 on Feb 2, 2011 12:14 AM

How to display amount in words for subtotal value?

Similar Messages

Maybe you are looking for