How to display and enter Chinese in the application?

Hi,everyone,I encounter such the problem about characterset.When I run the application on the jdeveloper3.1,I can't enter or display chinese,but VisualAge3.0 can do it.I don't know how to solve it?
Thanks in advance!

There may be a simpler answer... but
Generally speaking, the latest version of the JDK 1.3 does a much better job with internationalization / localization.
As you know, you can switch JDK's that JDeveloper works with (documented in help)
so that JDeveloper can work with JDK 1.3.
I would suggest you use JDK 1.3 RC2 or higher and see if this solves your problem.
One reason that Visual Age works is probably due to VA is using the IBM libraries which include additional enhancements.
Other comments/suggestions welcome,
-John
null

Similar Messages

  • How to display properties of dimension on the input form and report in bpc

    Dear Expert,
    Please tell me how to display properties of dimension on the input form and report in bpc. I can only display dimension number.
    thanks so much
    hungth

    Hi Hungh,
    If your are using BPC 10 with EPM add in client, you can use the function:
    EPMDimensionProperty ()
    This function retrieves the properties of a specified dimension in a specified cell range.
    Thanks, Safa

  • Display and Input Chinese conflict? +other qs.

    I have a Swing Application - and I want to have part of the GUI in Chinese. (List boxes etc.) In order to do this, I use Bitstream Cyberbit font and it works fine.
    In order to Input data in Chinese in a TextField, I use NJstar to do the data entry. This works fine on its own as well.
    - Now, when I have an application to do BOTH the above, it does'nt work (I cannot input Chinese AND display chinese)
    Do I need to use a font or something that comes with NJstar for DISPLAY as well?
    Is there an underlying conflict between NJStar and BitStream Cyberbit on when working together - i.e. one cannot use bitstream cyberbit for display and NJstar's font for data entry?
    - Data entered by entered by NJStar in chinese can be read by Java as Unicode? For example
    //if textfield1 contains chinese characters (as entered by njstar)
    String chineseString = jtextfield1.getText();
    do I need to do any change in encoding??
    - Sometimes NJstar enters rubbish (incorrect encoding) in my Swing window? Anyone had the same problem?
    Please advise. TIA,
    Carlos

    Hi Carlos,
    I'm yet to meet the Bitstream Cyberbit font, but one question sticks in my head. Is it a Unicode-based font?
    AFAIK, NJStar enters all its data in a Unicode format, so it's possible that while Swing knows how to handle NJStar's input, the Bitstream font doesn't know how to display it.
    As for the rest, the only other thing I can suggest is that every now and then CJK characters like to be converted over to UTF-16 in Java as opposed to UTF-8. I'm still not entirely sure why. :)
    From memory, you can change the encoding of the data you're entering with NJStar, so that might be worth a shot.
    Hope that helps!
    Martin Hughes

  • I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. don't need the caps/lock or ctrl key and due to an injury my daughter can only use her left hand to type. She is using a text to speech app to verbaliz

    I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. I don't need the caps/lock or ctrl key. Due to a brain injury my daughter can only use her left hand to type. She also uses a text to speech app to verbalize all of her needs since her speech isn't intelligible any longer either. And her vision was significantly affected also, so the keyboard has to be mounted about 6 inches from her face. So to reach across the keyboard with her left hand to the right side delete and enter button is physically difficult and causes typing errors, which cause people to not understand what shes trying to say.
    The best keyboard so far is the Zagg folio mini. I just had to make stickers to enlarge the letters on the key buttons.
    Does anyone know how I can reprogram these two keys? Or where I can buy a wireless mini keyboard for Ipad made for lefthanders with these two functions on the left side. I have searched for days and days. It's sooooo important to me that she be able to contribute her voice again. Imagine if you got in a car accident and couldn't speak clearly any longer, but understood everything still. Thanks for any help and suggestions you all take the time to share with me. I really appreciate the kindness of strangers to help me help my daughter.
    Sami's mom

    Sami\'s mom wrote:
    I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini.
    You cannot.

  • How to display multi-channel image in the 'proxy'?

    There're many examples to show how to display composite channels in the 'proxy'. But I don't find any example to show how to display multi-channel image in the 'proxy'. I found that I can use PSPixelOverlay to display alpha channel data like this:
    int nSpotChannel = gChannelCount - 4;
    PSPixelOverlay* overlay = new PSPixelOverlay[nSpotChannel];
    for(int i = 0; i < nSpotChannel; i++){
           if( i != (nSpotChannel - 1) )
                 overlay[i].next = overlay + i + 1;
           else
           overlay[i].next = NULL;
           overlay[i].data = gChannelData + (4 + i) * nPlaneBytes;
           overlay[i].rowBytes = gProxyRect.Width() * gDocDesc->depth / 8;
           overlay[i].colBytes = 1;
           overlay[i].r  = 230;
           overlay[i].g = 161;
           overlay[i].b = 174;
           overlay[i].opacity = 255;
           overlay[i].overlayAlgorithm = kStandardAlphaOverlay;
    pixels.pixelOverlays = overlay;
    Then, Seeing red part, it will trigger a new problem, that is how to get the color value of the alpha channel by plung-in itself? It seems that no channel color value info is in FilterRecord.
    If you have other solution, please tell me. Many thanks!

    This is what I've been doing - was just curious if there was a way to see a more cohesive image.
    If the individual EQ plugins are in fact the answer, is there any way to smooth how the Analyzer displays? The image I posted above, all of the tonal curves are very smooth. The analyzer tool shows a lot of peaks and valleys within the overall curve and it's hard to pinpoint each instrument's "sweet spot." Vocals for example are very hard to spot.
    - Morgan

  • How to display language key (0LANGU) in the query for BW report

    Hi,
    Can someone tell me how to display language key (0LANGU) in the query? I want to display which language (English or French) is used for material description in BW report. Thx.

    hi,
    check if the infoobject is kept as lang dependent or not  for material text, else you need to create a masterdata attribute with text and lang keys and do corresponding mapping, so then it can be displayed in your report
    regards
    laksh

  • TS1702 when i try to update an application it tells me that my account is not valid for use in the UK and have to switch to the australian store to update?how do i switch stores/countries for the applications?? Thanks.

    when i try to update an application it tells me that my account is not valid for use in the UK and have to switch to the australian store to update?how do i switch stores/countries for the applications?? Thanks.

    See  >  Change your iTunes Store country
    Here  >  http://support.apple.com/kb/HT1311

  • I am selling my apple mac pro but do not know how to deregister and register it to the new owner; how do you do this?

    I am selling my apple mac pro but do not know how to deregister and register it to the new owner; how do you do this?

    Before you sell or give away your computer, in addition to the steps mentioned in this support article, take these steps:
    Run Apple Diagnostics or the Apple Hardware Test. The buyer will do this (or he should), and you don't want to be surprised by the results.
    Reset the PRAM and the SMC, which might contain personal information.
    If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
    If you activated FileVault in OS X 10.7 or later, turn it off.
    If you use Boot Camp, the partition must be deleted
    If you created any other data partitions on the internal drive, remove them in Disk Utility.
    Erase the data partition(s) with the option to zero out data. An SSD doesn't need to be zeroed.
    You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you upgraded to OS X 10.7 or later, you must reinstall  an older OS, either from the installation media, if applicable, or by booting into Internet Recovery (option-command-R at the startup chime.) If you installed from physical media, deliver those to the new owner.
    If you're selling the machine, or donating it in working order, and it originally shipped with OS X 10.4 or 10.5, then you have the option of installing either from the discs that came with it or from a retail Snow Leopard disc (which you must then transfer with the machine.) The buyer should understand that if he doesn't get the original discs from you, he won't get the bundled iLife applications or the Apple Hardware Test. Replacements for the original discs can be ordered from Apple.
    The new owner will have to redownload any software that came from the App Store, including OS X upgrades, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer those either.
    Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

  • How to display my country flag on the task bar in osx mavericks?

    How to display my country flag on the task bar in osx mavericks?

    System Preferences > Keyboard > Input Sources
    Checkmark the box beside "Show Input menu in menu bar".

  • How to join and sign in to the Adobe Education Exchange | Adobe Education Exchange | Adobe TV

    To fully take advantage of the Adobe Education Exchange, you'll want to become a member. Learn how to join and sign in to the community.
    http://adobe.ly/VW90Uc

    Hi LightwaV - the best place to get support for the Adobe Education Exchange is to go through the Help Center on the AEE - http://edex.adobe.com/help-center/. Once there you can navigate through the help items to find answers to common questions and if you're problem isn't solved, you can email the AEE support team. They will be in a better position to help you and troubleshoot your account.
    Hope this helps!

  • Hello  J have problem in the demarage d iphoto the dialogue displays and asks me for the following text?  138 photos not having been imported were found in the iPhoto library(bookcase).  Would you care for import them? Yes or no you already have meet this

    onjour
    j ai des probleme au demarage d iphoto le dialogue s affiche et  me demande le  texte suivant ?
    138 photos n’ayant pas été importées ont été trouvées dans la bibliothèque iPhoto.
    Souhaitez-vous les importer ? oui  ou non avez vous deja rencontrer ce proble  si oui pouvez vous m aider
    Merci
    Hello
    J have problem in the demarage d iphoto the dialogue displays and asks me for the following text?
    138 photos not having been imported were found in the iPhoto library(bookcase).
    Would you care for import them? Yes or no you already have meet this prowheat if yes can you m help
    Thank you

    Open your iPhoto Library package with the Finder as shown in this screenshot
    and look in the folder named Auto Import.  Move any files in that folder to a folder on the Desktop and close the package. Do not make any other changes.  Launch iPhoto (the message should be gone) and drag the folder on the Dersktop into the open iPhoto window to import them.
    OT

  • HT1338 When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed  and remains as if the computer is now Frozen. Mac book  Pro leopard operating system. What can I do to get past the freeze?

    When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed  and remains as if the computer is now Frozen. Mac book  Pro leopard operating system. What can I do to get past the freeze?

    Could the disk have failed?
    Can you hear it?
    Boot from the install DVD and see what Disk Utility says.

  • I have a subsription to the cloud indesign and I cant open the application without a serial number?

    I have a subsription to the cloud indesign and I cant open the application without a serial number?

    http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
    -has a link about why you are prompted to enter a serial number

  • How to create Default Schema from within the application

    Hi friends
    I am creating users using the following within my application using this syntax
    BEGIN
    APEX_UTIL.CREATE_USER
    (:P124_USER_ID, :P124_USER_NAME,:P124_USER_FIRST_NAME,:P124_USER_LAST_NAME,' ',:P124_USER_EMAIL_ID,'xxxx');
    END;
    The default workspace for the user is set as blanks. I would like to set it to be the default workspace as per the current logged in user.
    Can you help me with the syntax for this
    thank you in advance
    Laxmi

    Laxmi,
    The subject of the post is "How to create Default Schema from within the application".
    But your question asks how to set the "default workspace" for a newly created user.
    Those are different questions and not the ones I think you need answered.
    Let me answer this question "How can you set the default schema for an account when creating the account and set it to the same value used for the default schema attribute of the administrator account used to authenticate to the currently running application?".
    In the apex_util.create_user call use named parameter notation and fetch the information about the currently logged-in user first, e.g.,declare
      l_workspace               varchar2(256);
      l_user_name               varchar2(256);
      l_first_name              varchar2(256);
      l_last_name               varchar2(256);
      l_web_password            varchar2(256);
      l_email_address           varchar2(256);
      l_start_date              varchar2(256);
      l_end_date                varchar2(256);
      l_employee_id             varchar2(256);
      l_allow_access_to_schemas varchar2(256);
      l_person_type             varchar2(256);
      l_default_schema          varchar2(256);
      l_groups                  varchar2(256);
      l_developer_role          varchar2(256);
      l_description             varchar2(256);
    begin
    apex_util.fetch_user (
      p_user_id                  => apex_util.get_current_user_id,
      p_workspace                => l_workspace,
      p_user_name                => l_user_name,
      p_first_name               => l_first_name,
      p_last_name                => l_last_name,
      p_web_password             => l_web_password,
      p_email_address            => l_email_address,
      p_start_date               => l_start_date,
      p_end_date                 => l_end_date,
      p_employee_id              => l_employee_id,
      p_allow_access_to_schemas  => l_allow_access_to_schemas,
      p_person_type              => l_person_type,
      p_default_schema           => l_default_schema,
      p_groups                   => l_groups,
      p_developer_role           => l_developer_role,
      p_description              => l_description);
    apex_util.create_user(
      p_user_id        => :P124_USER_ID,
      p_user_name      => :P124_USER_NAME,
      p_first_name     => :P124_USER_FIRST_NAME,
      p_last_name      => :P124_USER_LAST_NAME,
      p_email_address  => :P124_USER_EMAIL_ID,
      p_web_password   => 'xxxx',
      p_default_schema => l_default_schema);
    end;Scott

  • How we create a flat file on the application server

    hi,
    how we create a flat file on the application servere,this file have the header data and corresponding item data also.
    i.e. how we use the AT NEW and ATEND. statement in this file creation.
    pls send me some code related to this.
    thanks,
    vipin

    Hi Grafl,
    Chk this link
    Folder creation in AL11 using ABAP program
    try this code.This works on UNIX servers
    data: unixcom like   rlgrap-filename.
    data: begin of tabl occurs 500,       
            line(400),    
          end of tabl.
    dir = unixcom = 'mkdir mydir'. "command to create dir
    "to execute the unix command 
    call 'SYSTEM' id 'COMMAND' field unixcom
                      id 'TAB' field tabl[].
    <b>Reward Points if Useful</b>
    Regards
    Gokul

Maybe you are looking for