How to display Column data in one row

Hello,
I have one Employee with 4 effective date displayed in one column. Effective date is drived by Reason of : New Hire, Rehire, Transfer etc.
I want to show the effective dates for one reason in one single row. For example a person was rehired 4 times it will show as
1006555 6/12/2006 1/2/2007 6/11/2007 5/12/2008 12/29/2008 5/17/2010
It's currntly showing as:
AUDITEFFECTIVEDATE_3
6/12/2006
1/2/2007
6/11/2007
5/12/2008
5/17/2010

Well that's a little tougher... For a solution to work, you're going to need to find a way to differentiate between the the specific hiring events. Without seeing what data is available, I'd say start looking at the use of running totals... or in this case a running count.
Set it up to reset on EmployeeID and count each "event", incrimenting up with each instance.
Then your formula would look more like this...
IF {EventType} = "Rehire" AND {#RTotal1} = 1 THEN AUDITEFFECTIVEDATE_3
IF {EventType} = "Exit" AND {#RTotal1} = 1 THEN AUDITEFFECTIVEDATE_3
IF {EventType} = "Rehire" AND {#RTotal1} = 2 THEN AUDITEFFECTIVEDATE_3
IF {EventType} = "Exit" AND {#RTotal1} = 2 THEN AUDITEFFECTIVEDATE_3
IF {EventType} = "Rehire" AND {#RTotal1} = 3 THEN AUDITEFFECTIVEDATE_3
IF {EventType} = "Exit" AND {#RTotal1} = 3 THEN AUDITEFFECTIVEDATE_3
IF {EventType} = "Rehire" AND {#RTotal1} = 4 THEN AUDITEFFECTIVEDATE_3
IF {EventType} = "Exit" AND {#RTotal1} = 4 THEN AUDITEFFECTIVEDATE_3
This issue then becomes an issue of space on the report. You end up wasting 1/2 of your horizontal space trying to allot for one odd ball... You'll also get to re-work the report if the same employee goes for rounds 5, 6 or 7...
HTH,
Jason

Similar Messages

Show Column Data In One Row

Hello,
Tell Me how i can show a single column data in one row.
10
20
30
To
10,20,30

If you are OK with displaying comma separated list or column data you could:
SQL> select ltrim(sys_connect_by_path(ename,','),',') ename_list
2    from (
3           select ename,
4                   row_number() over(order by 1) rn,
5                   count(*) over() cnt
6             from emp
7          )
8    where rn = cnt
9    start with rn = 1
10    connect by rn = prior rn + 1
11 /
ENAME_LIST
SMITH,ALLEN,WARD,JONES,MARTIN,BLAKE,MILLER,SCOTT,KING,TURNER,ADAMS,JAMES,FORD,CLARK
SQL> To display as separate columns you would need to either know number of rows:
SQL> select min(case rn when 1 then ename else null end) ename1,
2          min(case rn when 2 then ename else null end) ename2,
3          min(case rn when 3 then ename else null end) ename3,
4          min(case rn when 4 then ename else null end) ename4,
5          min(case rn when 5 then ename else null end) ename5,
6          min(case rn when 6 then ename else null end) ename6,
7          min(case rn when 7 then ename else null end) ename7,
8          min(case rn when 8 then ename else null end) ename8,
9          min(case rn when 9 then ename else null end) ename9,
10          min(case rn when 10 then ename else null end) ename10,
11          min(case rn when 11 then ename else null end) ename11,
12          min(case rn when 12 then ename else null end) ename12
13    from (
14           select ename,
15                   rownum rn
16             from emp
17          )
18 /
ENAME1 ENAME2 ENAME3 ENAME4 ENAME5 ENAME6 ENAME7 ENAME8 ENAME9 ENAME10 ENAME11 ENAME12
SMITH   ALLEN   WARD    JONES   MARTIN BLAKE   CLARK   SCOTT   KING    TURNER   ADAMS    JAMES
SQL> or use dynamic SQL.
SY.

How to display all data on one page in web app

Hello.
So I have web app JSF (IceFaces framework) + JBoss all Crystal Report working perfectly. So I have page with Crystal Report tags (e.g.
<bocrv:reportPageViewer reportSource="#{crystalReport.reportPath}" ...
in this report I have table with some data (data from DB) and I want to display this data on one page. Unfortunately now this data are moving to the next page and unfortunately I even donu2019t know how switch to the next page (I see only info e.g. 1with 2).
So how to display this data on one page if its impossible how to torn on pagination.

So I canu2019t do this, I canu2019t display all data on one page (until Iu2019m using JSF tags)?
In JSF tags Iu2019m setting only path to file. In my bean Iu2019m using u201CReportClientDocumentu201D object itu2019s easy way to load report file (u201Copenu201D method) and set parameters (u201CgetDataDefController().getParameterFieldController()u201D method) and also connect to data base (u201Clogonu201D method) but I havenu2019t this property u201CsetSeparatePages(boolean)u201D.
Maybe Iu2019m doing this wrong and there is a simpler way maybe I can use somehow u201CCrystalReportVieweru201D please give my any advice.

Display array data in one row

Hello ---
I have an array of data, I would like to be displayed all the data in one row.<tr></tr>, how to do this?
If I use <h:table> <column></column></h:table>, it will display different rows.
Thanks!
Ben

Populate the components in the backingbean. Try something like:
JSF<h:panelGrid binding="#{myBean.grid}" />MyBeanprivate List arrayOfData;
private HtmlPanelGrid grid; // + getter + setter
private void populateGrid() {
    grid = new HtmlPanelGrid();
    grid.setColumns(arrayOfData.size());
    for (Iterator iter = arrayOfData.iterator(); iter.hasNext();) {
        Object value = iter.next();
        HtmlOutputText text = new HtmlOutputText();
        text.setValue(value);
        grid.getChildren.add(text);
}

Two rows as one display the data in one row

Hello All,
I would like to have data of two rows put in one as:
Lets say the data is like this:
SELECT * FROM TEST;
      COL1       COL2       COL3 C
       1.5          3          1 M
                    2          1 C
       2.5                     2 C
                  3.5          2 M
                  4.5          3 M How do i get the output as :
       COL1       COL2       COL3 COL4 COL5
       1.5          3          1 M      2
       2.5                     2 C      3.5
                  4.5          3 M If there are two rows with same value in Col3, then col5(a new dummy column in select stmt) the second row's col2 should be disaplyed in Row 1.
Can we do it in a Select Statement ?
Regds,
Amkotz

A try :
SQL> select * from Amkotz;
      COL1           COL2          COL3 C
       1,5              3             1 M
                        2             1 C
       2,5                            2 C
                      3,5             2 M
                      4,5             3 M
SQL> select a.col1,
2         a.col2,
3         a.col3,
4         a.col4,
5         max(decode(a.rowid,b.rowid,null,b.col2)) keep (dense_rank last order by a.col1,a.col2) as col5
6 from   (select Amkotz.*, row_number() over (partition by col3 order by col1,col2) rn from Amkotz) a, Amkotz b
7 where a.rn=1
8 and    a.col3=b.col3
9 group by a.col1,
10         a.col2,
11         a.col3,
12         a.col4;
     COL1       COL2     COL3 C COL5
      1,5          3        1 M 2
      2,5                   2 C 3,5
                 4,5        3 M            Nicolas.

How to select match data in one row

hello,
here is my query and its output
select stud.si_roll_no, stud.si_name, stud.si_father_name,stud.si_class, stud.si_father_nic_no ,sp.spi_amount,sp.spi_paid_date from si_student_info stud inner join spi_student_package_info sp on sp.spi_roll_no= stud.si_roll_no where stud.si_roll_no = 'IC10326'
"OUTPUT"
IC10326     MUNEEB JAVIAD KHAN     JAVEED KHAN     901          25000     12-AUG-09
IC10326     MUNEEB JAVIAD KHAN     JAVEED KHAN     901          12500     07-OCT-09
IC10326     MUNEEB JAVIAD KHAN     JAVEED KHAN     901          12000     07-DEC-09
IC10326     MUNEEB JAVIAD KHAN     JAVEED KHAN     901          13250     26-APR-10
IC10326     MUNEEB JAVIAD KHAN     JAVEED KHAN     901          16800     23-AUG-10
IC10326     MUNEEB JAVIAD KHAN     JAVEED KHAN     901          5000     06-SEP-10
IC10326     MUNEEB JAVIAD KHAN     JAVEED KHAN     901          7000     06-DEC-10
IC10326     MUNEEB JAVIAD KHAN     JAVEED KHAN     901          15300     15-FEB-11
whereas i want to the output looks like this
IC10326     MUNEEB JAVIAD KHAN     JAVEED KHAN     901          25000     12-AUG-09 12500     07-OCT-09 12000     07-DEC-09 13250     26-APR-10 and so on
is there any function that can do that or any smart way to handle this ?

with the use of aggregate functions we can get the required output here.
select * from
(select si_roll_no, si_name, si_father_name,si_class,
si_father_nic_no ,spi_amount,spi_paid_date,
Lead(spi_amount,1,NULL) OVER (PARTITION BY si_roll_no order by ROWNUM) ,
Lead(spi_paid_date,1,NULL) OVER (PARTITION BY si_roll_no order by ROWNUM) ,
Lead(spi_amount,2,NULL) OVER (PARTITION BY si_roll_no order by ROWNUM) ,
Lead(spi_paid_date,2,NULL) OVER (PARTITION BY si_roll_no order by ROWNUM) ,
Lead(spi_amount,3,NULL) OVER (PARTITION BY si_roll_no order by ROWNUM) ,
Lead(spi_paid_date,4,NULL) OVER (PARTITION BY si_roll_no order by ROWNUM)
FROM
(select stud.si_roll_no, stud.si_name, stud.si_father_name,stud.si_class,
stud.si_father_nic_no ,sp.spi_amount,sp.spi_paid_date,count(*) over ()
from si_student_info stud inner join spi_student_package_info sp
on sp.spi_roll_no= stud.si_roll_no
where stud.si_roll_no = 'IC10326'))
where rownum < 2;
Thanks,
Pavan

How can I Move data from one column to another in my access table?

I have two columns, one that stores current month’s data and one that stores last month’s data. Every month data from column 2 (this month’s data) needs to be moved to column 1 that holds last month’s data. I then null out column 2 so I can accumulates this month’s data.
I understand how to drop a column or add a column, how do I transfer data from one column to another.
Here is my trial code:
<cfquery name="qQueryChangeColumnName" datasource="#dsn#">
ALTER TABLE leaderboard
UPDATE leaderboard SET points2 = points3
</cfquery>
Unfortunately, I get the following error:
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error in ALTER TABLE statement.
How can I transfer my data with the alter table method?

I looked up the Access SQL reference (which is probably a
good place to start when having issues with Access SQL), and
it suggests you probably need a WHERE clause in there.
I agree the documentation is a good place to start. But you should not need a WHERE clause here.
Too few parameters. Expected 1.
If you run the SQL directly in Access, what are the results? At the very least, it should provide a more informative error message..

Report to display (actuals data from one cube and plan from another)

Hi Gurus,
         I have a requirement in reporting to display actual data from one cube and plan data from a different one.
        The example below might give a clear picture of the requirement.
rows has key figures and columns = months
Jan | Feb | Mar | Apr | May | Jun ...   ....
GrossSales
Net Sales
Now if I run the report for Current month (Apr), then for the months of (Jan, Feb and Mar) i need to get the data from CUBE1   and for the remaining months (Apr thru Dec) from CUBE2.
Similarly when i run the report next month(may),
then (data for Jan, Feb, Mar, Apr from CUBE1)
and ( May thru Dec from CUBE2)
Any suggestions.
Thanks in Advance
Kumar

Hi Henry,
     We alreadey have a multi provider which includes
FinDat Cube(CUBE1) for actuals and Comm.Goals cube (CUBE2) for plan.
So you suggest that we have two versions of key figure for actual and plan.
ie. each KF will have two versions.
actuals = (version 10, FiscPer<curr.mnth, key figure, acutals cube)
Plan = (version 20, FiscPer>=curr.mnth, key figure, comm.goals cube)
eg:
Jan | Feb | Mar | Apr | May | Jun ...
GrossSales(Act)
GrossSlaes(Plan)
Net Sales(Acutal)
Net Sales(Plan)
Correct me if I am wrong.
the report has a lot of key figures, having two versions for each kf will be confusing.
the user would like to see
Jan.....| ...Feb |..Mar |..Apr.....| May |
GrossSales   Act Value|Act.V |Act.V| PlanVal|PlanVal|
Net Sales
where Act.Value is from CUBE1
         Plan Value is from CUBE2
Thanks
Kumar

How do I make data from one Table flow into a separate Table

How do I make data from one Table flow into a separate Table in iworks numbers?

Great stuff Yvan,
KOENIG Yvan wrote:
Here you may see the way to transfer the contents of a column of Table A in a column of Table B
I used two kinds of formulas.
In the cell A2 of Table B
the formula is :
=Table A :: $B2
It may be :
=Table A :: $B
Apply Fill Down
Copy paste it in cell A1 which is in a header row.
This formula does its duty but it’s not robust enough and will not survive to a Sort.
This is why in B2, I inserted a more robust formula :
=OFFSET(Table A :: $A$1,ROW()-1,2)
You will find details about the functions used in Numbers User Guide delivered with every copy of iWork ‘08
Yvan KOENIG (VALLAURIS, France) samedi 6 août 2011 17:45:22
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !
The first suggestion was the simple answer I needed,
Thank you

Need to split data from one row into a new row redux

Hi folks,
I asked this question about eight months ago (see thread https://discussions.apple.com/message/23961353#23961353) and got an excellent response from forum regular Wayne Contello. However, I need to perform this operation again and when I attempted it recently, I am now greeted with a yellow warning triangle. Clicking it shows "This formula can’t reference its own cell, or depend on another formula that references this cell."
What I'm trying to do is the following:
I have an excel file that keeps track of members of a social group. The file places each member "unit" on a single row. The unit can be a single person or a couple. Columns are labeled "First1" "Last1" "Hometown1" "B-day1" while the second member of the unit is identified in columns like "First2" "Last2" etc.
What I'd like to do is duplicate those rows with two people (which I'll do by hand) but have a way of deleting the "xxxx2" data from one row and the "xxxx1" data from the duplicate row.
Wayne's illustrated solution was to create a blank sheet and enter the following formula in cell A2:
=OFFSET(Input Data::$A$2, INT((ROW()−2)÷2), COLUMN()−1+IF(MOD(ROW()−2, 2)=0, 0, 4)), which apparently worked fine for me last year but now is sending up an error flag. When I look at the formula, there is no clue except that which I quoted above.
Can anyone (or hopefully Wayne) take a second look at this and help me out? I can't imagine that it's a problem with using the newer version of Numbers, but who knows? I'm using version 3.2 (1861), which is the "new" Numbers.
Any help would really be appreciated.
Thanks!
-Tod

Hi Tod,
The error message "This formula can’t reference its own cell, or depend on another formula that references this cell." may be because your table may be different from the one you were using for Wayne's solution. Numbers has Header Rows, Footer Rows and Header Columns. Such Headers in tables exclude themselves from formulas. Excel does not recognise them as headers. What table are you using now?
A screen shot of (the top left portion of) your table or a description of what you see under Menu > Table will help.
Regards,
Ian.

How to display the data in XML files into JSP using Jdeveloper.

Hi All,
I have two XML files one XML file has the view names and the other has the table names of a particular views, how to display the data in JSP using JDeveloper where when i click a particular view the list of tables of that particular view from XML file two should be displayed in JSP Page.
Are there any reference documents, regarding the above process please can anyone guide through how to do it.

Let the servlet ask your business tier to provide the data, then stuff it into beans, and pack those into the Session instance. Then forward the request to the JSP, let the JSP get those beans and display them.

ALV: how to display only subtotals and total rows in the output

ALV: how to display only subtotals and total rows in the output
i am getting output
i am getting subtotals for respective fields
but i want to display only subtotals and totals rows in the output
i have tried the
totals_only parameter in slis_layout_alv
but it is not working.

hi,
For TOTAL
For the amount field / quantity field in the field catalog give DO_SUM = 'X' for WHOLE total
For SUBTOTAL
For subtotal you will have to create an internal table sort..Let's say you want to do subtotal for each customer..
DATA: lt_sort type SLIS_T_SORTINFO_ALV,
ls_sort type slis_sortinfo_alv.
CLEAR ls_sort.
ls_sort-spos = 1.
ls_sort-fieldname = 'Give the field name that you do the sum'.
ls_sort-up = 'X'.
ls_sort-subtot = 'X'.
APPEND ls_sort TO lt_sort.
fieldcatalog-do_dum = 'X'.
for subtotals
WA_SORT-FIELDNAME = 'ERSDA'.
WA_SORT-SPOS = '2'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOTAL = 'X'.
APPEND WA_SORT TO IT_SORT.
Refer
http://help.sap.com/saphelp_erp2004/helpdata/en/ee/c8e056d52611d2b468006094192fe3/content.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/doesnt-function-event-subtotal_text-in-alv-713787
regards,
Prabhu
reward if it is helpful

How to display a fixed number of rows in a page when using CL_GUI_ALV_GRID

Hy experts
How to display a fixed number of rows in a page when using CL_GUI_ALV_GRID?? lets say 500 ?? because my display table it may contain in some cases 10.000 and evidently I can t see all of them..
I have a button in my toolbar witch triggers this event
(display 500 records ) but I don t have the logic to do this only with methods of CL_GUI_ALV_GRID.
can you tell me a standard method of CL_GUI_ALV_GRID witch can help me do this?? any hint will be good..
Till now I was used to add a column to my structure witch represents a flag that is a number corresponding to every 500 records (a batch containing 500 records )
first       500 - flag -> 1
second 500 - flag -> 2
etc..but I m convinced that exists a way of doing this more easy..without damaging my structure..
thanx in advance..don t be shy..reply if you have any hints..

Hi,
if method SET_FILTER_CRITERIA doesn´t help, I think that you must work with 2 internal tables, a counter and a loop for filtering the records to be displayed:
case counter.
when 1.
     loop at int_table1 from 1 to 500.      "<-- your table with all records
       move int_table1 to int_table2
    endloop.
when 2.
     loop at int_table1 from 501 to 1000.
       move int_table1 to int_table2
    endloop.
etc, etc.
Call grid-->SET_TABLE_FOR_FIRST_DISPLAY
   exporting
     IT_OUTTAB = int_table2                "<-- instead of your currently table int_table1

How do i transfer data from one internal tabe to another.

Hi All,
         How do i transfer data from one internal tabe to another.
         Can i do it ebven if he tables are different in structure.
Please Advice.
Thanks in advance.

Hi Saket Tiwari,
I hope the earlier post by kashyap is good enough an answer. anywas in addition to it let me give a detailed
explanation of how you can populate an internal table.
1) Append data line by line.
     Syntax : APPEND [<wa> TO / INITIAL LINE TO] <itab>.
this appends new line to internal table <itab>.
2) Using COLLECT statement.
             COLLECT is another form of statement used for populating the internal tables. Generally COLLECT is used while inserting lines into an internal table with unique standard key. The syntax for COLLECT statement is as shown
     Syntax : COLLECT [<wa> INTO] <itab>.
3) Using INSERT statement
     Syntax INSERT [<wa> INTO / INITIAL LINE INTO] <itab> [index <idx>].
INSERT statement adds a line/work area to the internal table. You can specify the position at which the new line is to be added by using the INDEX clause with the INSERT statement.
Now coming to your request..
To append part or all of an internal table
     Syntax
              APPEND LINES OF <itab1> [FROM <n1>] [TO <n2>] TO <itab2>.
*     Note:
Without the FROM and TO options, this statement appends the entire table <itab1> to <itab2>.*
b) To insert part or all of an internal table into another internal table
     Syntax
          INSERT LINES OF <itab1> [FROM <n1>] [TO <n2>]
          INTO <itab2> [INDEX <idx>].
c) Using Move statement.
To copy entire contents of one table into another in one execution
     Syntax MOVE <itab1> To <itab2>.
               OR
          <itab1> = <itab2>.
but u hav to be careful because he contents of itab2 will eb overwritten on the execution of this statement.
These copy the contents of ITAB1 to ITAB2. Incase of internal tables with header line we have to use [] inorder to distinguish from work area. So, to copy contents of internal tables with header line the syntax becomes,
ITAB1[] = ITAB2[].
Coming to the letter part of your question, Yes, we can copy values between tables having different structures.
for this we use
                            MOVE-CORRESPONDING <itab1> TO <itab2>
    this executes the statement for their header lines. Searches for the sub-fields which occur both in itab1 and itab2 and then generates, for all relevant field pairs which correspond to the
        sub-fields ni , statements of the form MOVE itab1-ni TO itab2-ni. The other fields remain unchanged.
I hope the information provided has been of your help.
Reward if useful.
Regards,
Jose

How do I transfer data from one exterior harddrive to another?

How do I transfer data from one exterior harddrive to another when they are both connected to our Imac Desktop?

Depends what you want to transfer...
A few more Details about what you are trying to achieve would be good.

How to display Column data in one row

Similar Messages

Maybe you are looking for