How to display data on separate page based on account

Hi all,
I have a parameter on my report and it takes list of account ids. I want to display the data in a separate page for each account. For example: If I enter 100,101 then
101 data should start on separate page after completion of 100 account data.
Thanks in advance.

Hello,
You can create the SQL query in order to set the account as a group and use the
property "Maximum Records Per Page" of the repeating frame associated to this group to 1.
Regards

Similar Messages

How to display data from a recordset based on data from another recordset

How to display data from a recordset based on data from
another recordset.
What I would like to do is as follows:
I have a fantasy hockey league website. For each team I have
a team page (clubhouse) which is generated using PHP/MySQL. The one
area I would like to clean up is the displaying of the divisional
standings on the right side. As of right now, I use a URL variable
(division = id2) to grab the needed data, which works ok. What I
want to do is clean up the url abit.
So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end all
I want is clubhouse.php?team=Wings.
I have a separate table, that has the teams entire
information (full team name, short team, abbreviation, conference,
division, etc. so I was thinking if I could somehow do this:
Recordset Team Info is filtered using URL variable team
(short team). Based on what team equals, it would then insert this
variable into the Divisional Standings recordset.
So example: If I type in clubhouse.php?team=Wings, the Team
Info recordset would bring up the Pacific division. Then 'Pacific'
would be inserted into the Divisional Standings recordset to
display the Pacific Division Standings.
Basically I want this
SELECT *
FROM standings
WHERE division = <teaminfo.division>
ORDER BY pts DESC
Could someone help me, thank you.

Assuming two tables- teamtable and standings:
teamtable - which has entire info about the team and has a
field called
"div" which has the division name say "pacific" and you want
to use this
name to get corresponding details from the other table.
standings - which has a field called "division" which you
want to use to
give the standings
SELECT * FROM standings AS st, teamtable AS t
WHERE st.division = t.div
ORDER BY pts DESC
Instead of * you could be specific on what fields you want to
select ..
something like
SELECT st.id AS id, st.position AS position, st.teamname AS
team
You cannot lose until you give up !!!
"Leburn98" <[email protected]> wrote in
message
news:[email protected]...
> How to display data from a recordset based on data from
another recordset.
>
> What I would like to do is as follows:
>
> I have a fantasy hockey league website. For each team I
have a team page
> (clubhouse) which is generated using PHP/MySQL. The one
area I would like
> to
> clean up is the displaying of the divisional standings
on the right side.
> As of
> right now, I use a URL variable (division = id2) to grab
the needed data,
> which
> works ok. What I want to do is clean up the url abit.
>
> So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end
> all
> I want is clubhouse.php?team=Wings.
>
> I have a separate table, that has the teams entire
information (full team
> name, short team, abbreviation, conference, division,
etc. so I was
> thinking if
> I could somehow do this:
>
> Recordset Team Info is filtered using URL variable team
(short team).
> Based on
> what team equals, it would then insert this variable
into the Divisional
> Standings recordset.
>
> So example: If I type in clubhouse.php?team=Wings, the
Team Info recordset
> would bring up the Pacific division. Then 'Pacific'
would be inserted into
> the
> Divisional Standings recordset to display the Pacific
Division Standings.
>
> Basically I want this
>
> SELECT *
> FROM standings
> WHERE division = <teaminfo.division>
> ORDER BY pts DESC
>
> Could someone help me, thank you.
>

How to display data as separate clumns when db data is as different rows

Hi,
I think i have been confusing the group with UI details.
The basic requirement is " To display the data as columns which is present as rows in the table"
For example : For customer 1 ,there are 4 accounts. This info is available in the db table as 4 rows.
But the OAF display has to be like customer <<account 1 name>><<account 2 name>><<account 3 name>><<account 4 name>>
Also these needs to be advanced table in advanced table in the same feature.
Also all the account name columns are dynamic. There can be 3 accounts for one case and 4 for other and hence needs to be built in CO and cant be defined.
Please advise how do i code different row data as columnar data in a table or advanced table in oaf.
Does this description help you to help me .
Thanks,
Rma

Hi Rma,
Please try something like this:
drop table t_;
create table t_ (
nm Varchar2(20),
pr Char ( 7),
vl Number
insert into t_ values ('company 1','2003-06', 10);
insert into t_ values ('company 1','2003-07', 29);
insert into t_ values ('company 1','2003-08', 39);
insert into t_ values ('company 1','2003-09', 41);
insert into t_ values ('company 1','2003-10', 22);
insert into t_ values ('company 2','2003-06', 13);
insert into t_ values ('company 2','2003-07', 17);
insert into t_ values ('company 2','2003-08', 61);
insert into t_ values ('company 2','2003-09', 55);
insert into t_ values ('company 2','2003-10', 71);
insert into t_ values ('company 3','2003-06', 33);
insert into t_ values ('company 3','2003-07', 18);
insert into t_ values ('company 3','2003-08', 27);
insert into t_ values ('company 3','2003-09', 5);
insert into t_ values ('company 3','2003-10', 32);
select
nm,
jul,
aug,
sep,
jul+aug+sep "Total"
from (
select
nm,
max(case when pr='2003-07' then vl else null end) jul,
max(case when pr='2003-08' then vl else null end) aug,
max(case when pr='2003-09' then vl else null end) sep
from
t_
group by
nm);
This query returns:
NM JUL AUG SEP Total
company 1 29 39 41 109
company 2 17 61 55 133
company 3 18 27 5 50
I took this from http://www.adp-gmbh.ch/ora/sql/examples/pivot.html
Regards,
Reetesh Sharma

How to display data in report page footer ?

Hi friends, we have heading popup defined in PLUS. but I don't know hw I can place information in the footer part of the report page.

Hello Sabine, Hello Vignesh,
I have also started working in discoverer. The version is 9.0.4
I cannot find the Menu File --> Page Settings option neither in Discoverer Administrator nor in Discoverer Plus. Will you pls tell hw I can get them.
I have to implement Date of creation as well as page "m of n" functionality in the reports' footer.

How to display date and time on jsf page

Hi,
how to display date and time on jsf page
we are using 11.2.0.0 jdeveloper on windows.
thanks
Edited by: user12187801 on 26-Jul-2012 01:42

Your question is certainly lacking some information.
If you want a constantly updating date/time - then JavaScript is your best bet, and Google would find you examples like [url http://www.webestools.com/scripts_tutorials-code-source-7-display-date-and-time-in-javascript-real-time-clock-javascript-date-time.html]this
If you meant something else, then it's back to you to explain.

Not able to display data in separate columns using Unicode encoding

Hi,
Iam using Unicode encoding in my Java appln to support Japanese characters while downloading CSV report. But using the Unicode encoding displays all data in the first column of Excel sheet.
Please let me know how to display data in different columns using Unicode encoding in Excel sheet.
This is an urgent need. Please help me out.

Hi,
I have no problem with item :P15_EV_LCL this is having a value my probem here is i am using java script to display the value in different color based on the condtion case
eg:
select
case
TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2)
= :P15_EV_LCL
then
span style="background-color:lightgreen"
|| TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
else
span style="background-color:yellow"
|| TRUNC(
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
end "Effort"
from actuals Z
If i dont use this <Span style="Background-color:color"> i am able to generate data in excel sheet if i use this color coding i am not able to get data in spread sheet.
Please suggest
Thanks
Sudhir
Edited by: Sudhir_N on Mar 23, 2009 10:00 PM

Help on jsp code to display data in same page using using ajax ?

Is there any jsp code to display in same page using using ajax ?

Re: need help on how to display data in same jsp page. Locking.

How to display data elements in the tempalte header

Hello friends
i've this date_from and date_to parameters which are date parameters that user enters..
based on these date parameters I want to display them in the header as
day of date_from(for example if the date_from is 13-nov-2010.then I should display 13)and for date_to it should dispaly as 15 if for example the user enters
16-nov-2010.(date-1's day)
so it should break down to
date_from-13-nov-2010, 13
date_to- 16-nov-2010, 15
I want these two values to be displayed in the header of the template how to do this
pls help
also let me know how to display data elements in the template header
Edited by: erp on Dec 22, 2010 12:44 AM

Hi Ananth..Thanks for ur timely reply
Can I use it with <? substring(':date_from',1,2)?>
where date_from is an input parameter which user enters at the run time of the report.
I've to capture the date entered by the user and print it in the header..
Pls reply

How to display subtotals in separate column in alv report?

hi,
I am displayed the subtotals for QUantity field BDMNG in Reuse_alv_grid_display in the same column.
but I want to display subtotal in separate column.
How to display subtotals in separate column in alv report?
thanks&regards.
samba.k

Hi
As far as i know you can't do this,the option you have is to create one more column (subtotal) and populate it by manual calculation at every subtotal (not alv subtotal but yours) .
Best Regards
Yossi

How to display data in table

Hi all,
can any one tell me how to display data in a table when user click on a button. i have created a node with a set of fields from different tables now how to write the logic to display data in that table.
Thanks & Regards,
Naveen

DATA lo_nd_professionaltable TYPE REF TO if_wd_context_node.
DATA lo_el_professionaltable TYPE REF TO if_wd_context_element.
DATA ls_professionaltable TYPE wd_this->ElementS_professionaltable. "internaltable
TYPES: BEGIN OF TY_PFTAB,
       RATEGROUP TYPE /BIC/OIWRATEGRP,
       LEVEL TYPE /BIC/OIWPCSLEVEL,
       FROMDATE TYPE /BI0/OIDATEFROM,
       FROMTO TYPE /BI0/OIDATETO,
       STANDARD TYPE /BIC/OIWSTRATE,
       OVERHEAD1 TYPE /BIC/OIWOHRTE1,
       OVERHEAD2 TYPE /BIC/OIWOHRTE2,
       OVERHEAD3 TYPE /BIC/OIWOHRTE3,
       EXCEPTIONFLAG TYPE /BIC/OIMSECFILER,
       END OF TY_PFTAB.
DATA : IT_PFTABLE TYPE STANDARD TABLE OF TY_PFTAB,
       WA_PFTAB TYPE TY_PFTAB.
SELECT /BIC/WRATEGRP /BIC/WPCSLEVEL DATEFROM DATETO /BIC/WSTRATE /BIC/WOHRTE1 /BIC/WOHRTE2 /BIC/WOHRTE3
FROM /BIC/AGLDCPRTS00 INTO TABLE IT_PFTABLE.
*TYPES : BEGIN OF TY_EXCEPTION,
       EXCEPTIONFLAG TYPE /BIC/OIMSECFILER,
       END OF TY_EXCEPTION.
*DATA : IT_EXTABLE TYPE STANDARD TABLE OF TY_EXCEPTION,
      WA_EXTABLE TYPE IT_EXTABLE.
*SELECT /BIC/MSECFILER FROM /BIC/AGLDCLMLT00 INTO TABLE IT_EXTABLE.
navigate from <CONTEXT> to <PROFESSIONALTABLE> via lead selection
lo_nd_professionaltable = wd_context->get_child_node( name = wd_this->wdctx_professionaltable ).
get element via lead selection
lo_el_professionaltable = lo_nd_professionaltable->get_element( ).
@TODO handle not set lead selection
IF lo_el_professionaltable IS INITIAL.
ENDIF.
get all declared attributes
lo_el_professionaltable->get_static_attributes(
   IMPORTING
     static_attributes = ls_professionaltable ).
lo_nd_professionaltable->bind_table( new_items = IT_PFTABLE set_initial_elements = abap_false ).

How to process data in the past based from data in the present

hello guys,
i have a problem in my labview programs. how to process data in the past based from data in the present ?
i have a formula self-organizing maps
this formula is looking for D1, D1 is neuron index that will be searched for the smallest value.and the result are D1=2 ,D2=5, D3=17 from calculating with formula .it means the smallest value is 2, "2" from weight [2 2] in file attached.
and then it will be in other formula
it mean [2 2] + 0.5 ( [1 1]-[2 2] ) = [1.5 1.5]
and the weight will be [1.5 2 2 ] in matrix
1.5 3 5
I would appreciate any input/help on solving this
thanks
Attachments:
dika.vi ‏16 KB
weight.txt ‏1 KB
data .txt ‏1 KB

Hi Ronny Hanks,
Moving your records from internal table into the database table depends upon various scenarios :-
1. If you use INSERT statement.
INSERT <database_table> FROM TABLE <internal_table>.
But in this case, you need to make sure that you don't have any duplicate entries in your internal table that violates data entry into database table, else you will get a dump.
INSERT <database_table> FROM TABLE <internal_table> ACCEPTING DUPLICATE KEYS.
In this case, you are forcefully inserting duplicate records into your database table which may lead to data redundancy in your database table.
2. If you use UPDATE statement.
UPDATE <database_table> FROM TABLE <internal_table>.
This will update the existing records in your database table from the internal table.
3. If you use MODIFY statement.
MODIFY <database_table> FROM TABLE <internal_table>.
This statement works both in combination of INSERT & UPDATE statements.
Existing records (in database table) will be eventually updated/modified and new records (not in database table currently) will be successfully inserted into the database table.
Hope this solves your problem.
Thanks & Regards.
Tarun Gambhir.

How to display Date Calendar in Oracle BI Answers Prompts (parameter)

I'm still new to OBIEE.
How to display Date Calendar in Oracle BI Answers Prompts (parameter)?
Thanks.

Hi,
While creating Dash Board prompt choose the control to 'Calendar'.
I think it is not possible to provide 'Calendar' control using Prompts tab while creating request.
It is possible to write Java Script for a Column of data type 'char'. So, cast the date data type to char.
Go to: Column Properties --> Data Format
Choose override default data format to view the available options in the drop down list.
I would be very happy if anybody acknowledge me that I am wrong.
-Vency

How to display data depend upon ListBox value?

Hi Experts and Particularly Hema,
As I asked before how to display data in the ListBox, I got an very good response from you all(particularly Hema) .
Now what my doubt is asked with sample scenario below:
In Screen Painter -
Two fields namely : One List Box and other is I/O used only for displaying purpose i.e., only for output, not for input purpose.
List Box is filled by primary key field(C1) value from one table(T1) when the screen load.(i.e., such code is written in PBO).
Now what I need is :
If the user select any one value in the List Box then it automatically display the corresponding C2 value from T1 in the I/O field.
I think you may all understand what I am trying to ask.Please let me know the solution.
Thanks in advance,
Regards,
Raghu

Simply attached a function code for the listbox... when the user changes the value, you will be able to pick this up in the PAI and loop back to the PBO and redisplay the corresponding output field.
Jonathan

How to display region from one page on the other page?

Hi,
I'd like to ask if someone know how to display region created on page X on page Y.
I've tried to create a "URL" region on Y but this doesn't work and I generally think this is blind way.
Next I've found an internal function "flows_020100.wwv_flow_disp_page_plugs()" that works pretty well (PL/SQL type region with calling the function) except that is displaying only regions on the same page. I know it's dirty hack but ...
Any ideas or hints how to solve this? Thanks ...

have a look here ...
http://www.oracle.com/technology/products/database/application_express/pdf/apex_best_practices.pdf

How to display data in table with dynamic rows, section wise in a page.

Hello all,
I work on report creation in BI Publisher where I need to display data from xml in a table in pdf format.The output page is divided into two vertical sections , containing tables, with exactly same columns on left and right sections. The number of rows in table depends on the output of the fetching query. The page is to be populated in such a way that, at first, the left table is populated, then the next rows fill up the table on the right section of the page, if more rows are left, they fill up the tables on next page[first the left table, and then the right one, in a similar fashion as in page 1]
On a bird's eye view, the data needs to be simply mapped to a table, with dynamic number of rows, and so can span number of pages depending on size of data. On a implementation level, I am stuck in getting the left section of the page populated first, then the right section[in place of the right page], and then the next page.
Please guide me if someone has any idea in getting this achieved.
Thanks in advance.

Thanks for the response...
I am able to get the desired functionality. I just need the tables to be inside a bigger table, that also has a dividing line between the two columns. This is was is intended in the req. provided to me. The column formatting option provides me a line ,but that is not further modifiable .Please help me in getting a perpendicular line between the two columns, which I need to be of a specified width and color.

How to display data on separate page based on account

Similar Messages

Maybe you are looking for