How to display different form_letters for 2 conditions?

Hi everyone.
I have a new question. I absolutely have no idea on how to do it.
I have prepared a report using form_letter & tabular style.
In the form_letter style report, there is a subject line to the letter.
This subject line should change for a condition.
In the tabular style report, there is a column named as 'TYPE' - [ Cumulative & Non-cumulative ]
There are two subject lines. [ (Subject-1) & (Subject-2) ]
I want to display "Subject -1" when TYPE - Cumulative .
I want to display "Subject -2" when TYPE - Non-Cumulative .
How do i do this?
I want to paste the image regarding this, but i am unable to paste because the 'Insert image' is disabled. How do i insert image?
Thank You.

Hi Vijetha,
Create a formula column named subject , data type is character and widh is 100(based on your subject length you can give).
pl/sql formula is:
function subjectformula return char is
begin
if :type='cumulative' then
return (:subject-1);
else
return (:subject-2);
end if;
end;
In the layout model create a field and call the formula column subject as source.
I think it is helpful to you.

Similar Messages

  • How to display different icon, for different node of jtree

    Hi All,
    How to display different icon, for different node of jtree

    you haven't responded to my last post here: [http://forums.sun.com/thread.jspa?threadID=5323190&messageID=10382676#10382676|http://forums.sun.com/thread.jspa?threadID=5323190&messageID=10382676#10382676]

  • How to display different text for labels in Group Above Report Oracle Repor

    Hello,
    Is there a way to change the text that is displayed in Labels in a Group Above Report? For example, I have a Group Above report with my columns of data and above the columns I have my column labels, but I would like to be able to display various text, i.e. different labels based on condition. In other words, Column1 label could say Column 1 or This is Column1, based on a condition. This is Oracle Report Builder 10.1.2.0.2.
    Thank you.

    968277 wrote:
    I'm thinking it is possible with a Format Trigger, but I've only ever returned (TRUE) or (FALSE). I am very new to Oracle Reports Builder. Thanks.Hi,
    Yes it's possible. and your are in the right place. use this true and false. For example
    /*true means display, false means don't display */
    if your_criteria_or_condition is ok then
    return (TRUE);
    else
    return (FALSE);
    end if;create as many label as your need and control with the code..
    Hope this works..
    Hamid
    Mark correct/helpful to help others to get right answer(s).*

  • How to display different message for More.. in jsp ?

    Hi,
    We have requirement where we have to display See All after say after 10 dimVals . I have enable dynamic refinement ranking and put value as 10 also I have checked the box for More..
    I want to display See All instead of More.. in my application. Please let me know how can I achieve this.
    Anup

    I don't think you can - I usually just use some simple web application logic to check for "More..." and replace it with whatever should be displayed instead.
    Michael

  • How do i display different tooltip for different parts of an image

    I have a .jpg image that i would like to display different tooltips for depending in where the mouse pointer is in the image.
    Any help is appreciated.

    I edited the button template in the app.xaml so all my buttons have transparent properties for all the trigger properties and the setter properties since in this instance i have no other use for the button.
    <Application x:Class="Application"
    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
    StartupUri="MainWindow.xaml">
    <Application.Resources>
    <Style TargetType="{x:Type Button}">
    <Setter Property="FocusVisualStyle">
    <Setter.Value>
    <Style>
    <Setter Property="Control.Template">
    <Setter.Value>
    <ControlTemplate>
    <Rectangle Margin="2" SnapsToDevicePixels="True" Stroke="{DynamicResource {x:Static SystemColors.ControlTextBrushKey}}" StrokeThickness="1" StrokeDashArray="1 2"/>
    </ControlTemplate>
    </Setter.Value>
    </Setter>
    </Style>
    </Setter.Value>
    </Setter>
    <Setter Property="Background" Value="Transparent"/>
    <Setter Property="BorderBrush" Value="Transparent"/>
    <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.ControlTextBrushKey}}"/>
    <Setter Property="BorderThickness" Value="1"/>
    <Setter Property="HorizontalContentAlignment" Value="Center"/>
    <Setter Property="VerticalContentAlignment" Value="Center"/>
    <Setter Property="Padding" Value="1"/>
    <Setter Property="Template">
    <Setter.Value>
    <ControlTemplate TargetType="{x:Type Button}">
    <Border x:Name="border" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" Background="{TemplateBinding Background}" SnapsToDevicePixels="True">
    <ContentPresenter x:Name="contentPresenter" ContentTemplate="{TemplateBinding ContentTemplate}" Content="{TemplateBinding Content}" ContentStringFormat="{TemplateBinding ContentStringFormat}" Focusable="False" HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}" Margin="{TemplateBinding Padding}" RecognizesAccessKey="True" SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}" VerticalAlignment="{TemplateBinding VerticalContentAlignment}"/>
    </Border>
    <ControlTemplate.Triggers>
    <Trigger Property="IsDefaulted" Value="True">
    <Setter Property="BorderBrush" TargetName="border" Value="{DynamicResource {x:Static SystemColors.HighlightBrushKey}}"/>
    </Trigger>
    <Trigger Property="IsMouseOver" Value="True">
    <Setter Property="Background" TargetName="border" Value="Transparent"/>
    <Setter Property="BorderBrush" TargetName="border" Value="Transparent"/>
    </Trigger>
    <Trigger Property="IsPressed" Value="True">
    <Setter Property="Background" TargetName="border" Value="Transparent"/>
    <Setter Property="BorderBrush" TargetName="border" Value="Transparent"/>
    </Trigger>
    <Trigger Property="ToggleButton.IsChecked" Value="True">
    <Setter Property="Background" TargetName="border" Value="Transparent"/>
    <Setter Property="BorderBrush" TargetName="border" Value="Transparent"/>
    </Trigger>
    <Trigger Property="IsEnabled" Value="False">
    <Setter Property="Background" TargetName="border" Value="Transparent"/>
    <Setter Property="BorderBrush" TargetName="border" Value="Transparent"/>
    <Setter Property="TextElement.Foreground" TargetName="contentPresenter" Value="#FF838383"/>
    </Trigger>
    </ControlTemplate.Triggers>
    </ControlTemplate>
    </Setter.Value>
    </Setter>
    </Style>
    </Application.Resources>
    </Application>

  • Qry:How to get different price for each price list (variable area) in order

    1-How to get different price for each price list (variable area) in order for sale. for the opportunity to display and select multiple prices.
    2- I add a location store from a table in line item and I want to see this area in order,.
    I 'm created 2 field location(item line and order), 1 table location
    I tried this for exemple : select $ [userfieldlocation.OITW]

    Thanks Suda for your answer,
    the Formatted Search for prices is OK, but for the Item locations in warehouse this is not so simple,     
    I must have several (at least 2) locations for the item in the Warehouse and a track of this location and search possibilities.
    read carefully and imagine how (Management warehouse locations)
    I added a user table '@Location' who linked to a user field 'U_Location in Item master data --> lnventory data  line and an ather user field 'U_Location' in sales order
    I met the value of location in the table (list of locations for any warehouse), I select the location of each item while receiving merchandise in the user field of inventory data line (Item M data) and this value appears in the sales order 'U_Location' user field ( only the location value in the default warehouse for this Item)
    or
    create an user field 'location' in Good receipt PO to fill it while receiving merchandise that appears in the sales order to give possibility to find/select the location of the item at this order and in Item master data
    I think we will use all these tables
    @LOCATION
    PDN1
    OITM
    OITW
    OWHS
    RDR1
    Juste a another question : where you found this and What is: ' 38.1.0 '
    Is it in document (System information):Item=38 Pane=1 ??
    Thanks,
    Ouchen

  • NOT WORKING -How To Display All Comments for a Planning Package

    Hi All,
    I am using How to Document "How To Display All Comments for a Planning Package" to display comments for list of "cost center" against different "fiscal/year" for Key Figure "Budget Amount".
    Below is how the Layout looks like where comments are posted against Cost Center- year combination.
    Cost Center                          2007     2008     2009     2010     2011
    3          2.00     2.00     2.00     2.00     2.00
    4          2.00     2.00     2.00     2.00     2.00
    6          2.00     2.00     2.00     2.00     2.00
    7          2.00     2.00     2.00     2.00     2.00
    This case is very similar to the example given in how to document but after following all the steps correctly in the document and also followings various forum links such as below , I am not able to display the comments for list of Cost Centers.
    "How to...BSP display comments"...problem with row comment
    Below are the issues being faced:
    1) When i save the comments , the icon for comments (indicating that some comments have been entered) is not shown against selection of Cost Center-Year although the comment is saved.Comment are  also visible in BPS0.
    2) On execution "Web interface could not be loaded" - is the message that is shown in the area where BPS application should show all the comments.
    Highly Appreciate any help with issues mentioned above.
    Kind Regards,
    Robin Johri

    Hello Robin,
    1) please check if you set the row/cell selection property correctly for the layout component in the web interface.
    2) the error does not make sense since the comments are displayed in an iframe using a BSP application, not a web interface. Check the URL in the HTML text component.
    Regards,
    Marc
    SAP Techology RIG

  • How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?

    Hi All,
    How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?
    Assume Material is Pen.
    While creating Sales Order in VA01 how to bring different price for the same material for Platinum,Gold and Silver Customers.
    Kindly help me out.
    Thanks,
    Renjith Jose

    A good place to start is http://www.javaworld.com/javaworld/javatips/jw-javatip34.html
    Also, do a search in this forum on HttpURLConnection. That class allows you to use POST method to send form data to a web server.
    "Hidden" variables are only hidden in HTML. The HTTP that gets POSTed to the web server doesn't distinguish between hidden and not hidden. That is, the content you would write to the HttpURLConnection.getOutputStream() would be something like:
    hidden=1&submit=ok(Of course, the variable names would depend on what the web server was expecting from the form.)
    Also, be sure to set the Content-Type request parameter to "application/x-www-form-urlencoded"

  • How to display different icon within WDA alv table base on row data ?

    Hi,
    is that possible to display different icon for every row within ALV table depending on the row data ?
    for instance if the status 'S' display ~Icon/SuccessMessage and 'E' display ~Icon/ErrorMessage ?
    because base on this code below i only can set 1 icon for the whole row data.
    LOOP AT lt_columns ASSIGNING <fs_column>.
        CASE <fs_column>-id.
          WHEN 'ICO'.
            CREATE OBJECT lr_caption.
               lr_caption->set_image_source( value = '~Icon/SuccessMessage').
               <fs_column>-r_column->set_cell_editor( lr_caption ).
        ENDCASE.
      ENDLOOP.
    Thank you in advance.
    Fernand

    Hello,
    Yes it is possible to display different images based on data.
    For that what you can do is create one attribute 'STATUS' of type string in context node which you are mapping to ALV.
    And fill that attribute with the path to image based on your requirement like for status 'S' set the attribute to ~Icon/SuccessMessage and if status is 'E', set it to ~Icon/ErrorMessage at runtime.
    Now in the settings for ALV use the following code:
    * Display icon in column seatsocc
      DATA: lr_column TYPE REF TO cl_salv_wd_column,
            lr_image TYPE REF TO cl_salv_wd_uie_image,
            lv_icon TYPE string.
      lr_column = lv_model->if_salv_wd_column_settings~get_column( 'SEATSOCC' ).
      CREATE OBJECT lr_image.
      lr_image->SET_SOURCE_FIELDNAME( 'STATUS' ).
      lr_column->set_cell_editor( lr_image ).
    in the above code, column 'SEATSOCC' will be displayed as an icon.
    Sample code to fill the attribute 'STATUS'
    LOOP AT lt_flights INTO ls_flight.
        lv_seatsfree = ls_flight-seatsmax - ls_flight-seatsocc.
        IF lv_seatsfree = 0.
          ls_flight-status = 'ICON_RED_LIGHT'.
        ELSEIF lv_seatsfree <= 50.
          ls_flight-status = 'ICON_YELLOW_LIGHT'.
        ELSE.
          ls_flight-status = 'ICON_GREEN_LIGHT'.
        ENDIF.
        MODIFY lt_flights FROM ls_flight.
      ENDLOOP.
    Hope this helps!
    Regards,
    Srilatha
    Edited by: Srilatha M on Jun 25, 2010 12:02 PM

  • How To… Display All Comments for a Planning Package

    Hi,
    I have the How-to guide mentioned in the subject and have now moved onto BI7. Is the guide still applicable in BI7 and how would I go about implementing the above How-to in IP instead of BPS?
    Thanks,
    Ale

    Thanks Marc.
    I will use BW-BPS for the time being as I've seen screenshots of the solution in the how-to. Still need to answer the question here:
    How To. Display All Comments for a Planning Package
    As I have no idea how to achieve the functionality detailed in the thread above.
    Thanks for your time Marc,
    Regards,
    Ale

  • How to display icon symbols for a field in se38 program

    HI
    IAM VIJAY. PLS GIVE ME THE SOLUTION .
    how to display icon symbols for a field in se38 program.
    WITH REGARDS.
    VIJAY.

    Hi
    you cab use INCLUDE <ICON> and use standard icons provided by sap.
    Sample code:
    WRITE /20(2) ICON_DATE AS ICON.
    WRITE /20(2) ICON_TIME AS ICON.
    WRITE /20(2) ICON_ADDRESS AS ICON.
    Thanks!!

  • How to set different header for different Standard report page

    How to set different header for different Standard report page

    Hi,
    A easy answer would be use the 'set report header text.vi' but maybe you are talking about something else ?

  • How to set different Icons for Jtreenode

    How to set different Icons for Jtreenode,i want to set icons for jtreenode,not only for leaf,open,closeicon,i hope that each node has a different icon.Thanks!

    you need to check for the node value within a renderer, then assign an icon based on what you expect to get back.
    check out this page. http://java.sun.com/docs/books/tutorial/uiswing/components/tree.html

  • How to set different icons for different windows which is seen in the top left corner?

    Hi
    How to set different icons for different windows which is seen in the top left corner? I know when building exe there is a option to edit icons or add icons and that icon is default for all the windows in the project. But i want different icons for different windows which is possible in VB.
    Is there any way to set icon by calling any dlls.
    Thanks & Regards
    Samuel J
    [email protected]

    Hi Sam,
    no problem. See the attachment.
    Mike
    Attachments:
    TestIcon_LV85.zip ‏44 KB

  • How to display different fonts in same indicator in labVIEW

    hi 
       i want to know how to display different fonts in same string indicator at run time in labVIEW 8.2
    Regards
    Abhishek Verma

    Hi ABHI VERMA,
    see this http://digital.ni.com/public.nsf/allkb/6BD344ACA4DEE20A8625692700737E16 
    Mike

Maybe you are looking for