How to display first three records of an internal table

hi,
I have a requirement, in which i want to display the first 3 records of an internal table.
Pls help me.
Regards,
Vipin

Hi,
data: count type sy-tabix.
count = 1.
if count < 4.
loop at itab.
write: / Field.
endloop.
endif.
Reward if helpful.
Regards.

Similar Messages

How to select first several records from a database table by using select?

Hi,
   I want to select first 100 records from a database table by using select clause. How to write it?
   Thanks a lot!

hai long!
             well select statement is used to retrive
records from the database.
following is the syntax to be used.
1) select * into corresponding fields of itab from basetable where condition.
endselect.
ex: select * into corresponding fields of itab from mara
            where matnr >= '1' and matnr <= '100'.
       append itab.
      endselect.
select * is a loop statement.it will execute till matnr is less than or equal to 100.
note: you can also mention the required field names in the select statement otherwise it will select all the field from table mara.
note: itab means your internal table name.
hope you got the required thing.if it really solved u r problem then award me the suitable points.<b></b>

How to delete the matching records from two internal tables

Hi ,
I have two internal tables say A and B of the same type. If A has 10 records and B has 4 records , I want to delete the 4 records in B from A .
loop at B into wa .
delete A where key = wa - key .
endloop.
takes a long time if the table B is huge. how can I improve the performance.
Thanks.
Gayathri

Hi Gayathri,
You could try field-symbols. It reduces the data transfer from the internal table B to the work area.
field-symbols <fs_itab_b> like line of B.
loop at B assigning <fs_itab_b>.
delete A where key = <fs_itab_b>?-key.
endloop.
Regards,
<a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=zwcc%2fwm4ups%3d">anand Mandalika</a>.

How to display the NULL records by multiple XMLTABLE()

First, let me provide the testing data of INSERT and CREATE TABLE sql:
create table xml_t2 (xml_raw XMLTYPE);insert sql, a bit long.....just copy and paste then run it will be OK!
the system warns: Your message exceeds the maximum length of 30000 characters.
So, I place it on the mediafire shariing space
http://www.mediafire.com/?npmot6lgl86dgliTesting SQL:
SELECT t1.years, t1.months,t1.days,t1.hours,t1.value,t2.value
        FROM xml_t2,
        XMLTABLE ('$d/cdata/F1' passing xml_raw as "d" COLUMNS years integer path '//year', months varchar(3) path '//month', days varchar(2) path '//day', hours varchar(2) path '//hour', mins varchar(2) path '//minute', value float path '//value') t1 ,
        XMLTABLE ('$d/cdata/F2' passing xml_raw as "d" COLUMNS years integer path '//year', months varchar(3) path '//month', days varchar(2) path '//day', hours varchar(2) path '//hour', mins varchar(2) path '//minute', value float path '//value') t2The condition for now is....In the xml data, I have deleted the month 'Jan' with <F2>tag which is in 2010.
That mean the output of XMLTABLE t2 will not contain the 'Jan' records but it is still remain in XMLTABLE t1.
The problem is that when I use the above SQL to show the t1.value, it will not display the t1.value in 2010 Jan.....it just skipped 'Jan' and becomes 'Feb'...
what i would prefer to display is something like this:
YEARS MONTHS DAYS HOURS t1_value t2_value
2009     Jan    01   01       8       8
2009     Jan    01   02       8     580
2009     Jan    02   01     580     580
2009     Jan    02   02     580     580
2009     Feb    01   01     440     440
2010     Jan    01   01     627     NULL
2010     Jan    01   02     627     NULL
2010     Jan    02   01     367     NULL
2010     Jan    02   02     367     NULL
2010     Feb    01   01     367     849
2010     Feb    01   02     849     849
..............So...the main problem is how to display back the record in JAN in 2010 in t1 XMLTABLE and assign null to the t2 XMLTABLE since it doen't contains this months record.
THANKS for help!!

Hi,
What's your database version?
Are you using binary XML storage? (This is the default in 11.2.0.2)
If not you have to explicitely specify it :
create table xml_t2 (xml_raw XMLTYPE)
xmltype column xml_raw store as securefile binary xml;Along with object-relational, it's the best storage strategy to use in conjunction with XMLIndex.
You should also use a structured XML index instead, it's more appropriate than the unstructured index you're currently using :
create index xml_t2_sxi on xml_t2 (xml_raw)
indextype is xdb.xmlindex
parameters (q'#
XMLTABLE xml_t2_xt '/cdata'
COLUMNS
YEARS INTEGER    PATH 'F1/name/year',
MONTHS VARCHAR(3) PATH 'F1/name/month',
DAYS   VARCHAR(2) PATH 'F1/name/day',
HOURS VARCHAR(2) PATH 'F1/name/hour',
MINS   VARCHAR(2) PATH 'F1/name/minute',
VALUE FLOAT      PATH 'F1/name/value',
VALUE2 FLOAT      PATH 'F2/name/value'
call dbms_stats.gather_table_stats(user, 'XML_T2');Use the query provided by Stew and check the explain plan, you'll see the difference.

How to display first row value returened from a query as checked as default in a report

How to display first row value returned from a query as checked as default in a report
Example
Parameter 1
Paramerter2
ABD
x(checked)
Test
DEF
JMG
Mudassar

Hi Mudassar,
The issue is caused by the order in which the parameters appear in the report data tab can be difference between our report execution and it failing. In other words, “Parameter2” is execution before parameter “A” due to this issue. We can adjust the parameter’s
order to solve the issue.
If “Parameter2” is parameter “A”, we cannot use that expression. Because fields cannot be used in report parameter expression, if we want to display the first value returned from a query as default value, we have to fill the “Specify values” text box with
the specific value in Default Values dialog box.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Creating BOM using BDC :How to display no of records from flat file under

Hi,
      How to display no of records from flat file under one (Alternative BOM) vertically.
    When i execute, the records are replacing one by one.
Here my coding:
report ZBOM1
       no standard page heading line-size 255.
*include bdcrecx1.
DATA: BEGIN OF bdc OCCURS 0,
       matnr(18),
       werks(4),
       stlan(1),
      END OF BDC.
DATA: BEGIN OF BDC1 OCCURS 0,
       idnrk(18),
       MENGE(18),
       MEINS(3),
       postp(1),
      END OF bdc1.
DATA: BEGIN OF BDCDATA OCCURS 0,
         matnr(18),
         werks(4),
         stlan(1),
         idnrk(18),
         MENGE(18),
         MEINS(3),
         postp(1),
         posnr(4),
      END OF BDCDATA.
data: ibdcdata type standard table of bdcdata WITH HEADER LINE.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
   FILETYPE                       = 'ASC'
   HAS_FIELD_SEPARATOR            = ','
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                     =
HEADER                         =
TABLES
    DATA_TAB                      = BDCDATA
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
loop at bdcdata.
perform bdc_dynpro      using 'SAPLCSDI' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-STLAN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29N-MATNR'
                              'SOFTDRINKS'.
perform bdc_field       using 'RC29N-WERKS'
                              'WIND'.
perform bdc_field       using 'RC29N-STLAN'
                              '1'.
perform bdc_field       using 'RC29N-DATUV'
                              '16.09.2008'.
perform bdc_dynpro      using 'SAPLCSDI' '0110'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29K-BMENG'
                              '1'.
perform bdc_field       using 'RC29K-STLST'
                              '1'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-EXSTL'.
perform bdc_dynpro      using 'SAPLCSDI' '0111'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-LABOR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSTP(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_field       using 'RC29P-IDNRK(01)'
                              BDCDATA-IDNRK.
perform bdc_field       using 'RC29P-MENGE(01)'
                              BDCDATA-MENGE.
perform bdc_field       using 'RC29P-MEINS(01)'
                              BDCDATA-MEINS.
perform bdc_field       using 'RC29P-POSTP(01)'
                              BDCDATA-POSTP.
perform bdc_dynpro      using 'SAPLCSDI' '0130'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR'.
perform bdc_field       using 'RC29P-POSNR'
                               BDCDATA-POSNR.            "'0010'.
perform bdc_field       using 'RC29P-IDNRK'
                              BDCDATA-IDNRK.             "'15'.
perform bdc_field       using 'RC29P-MENGE'
                              BDCDATA-MENGE.             "'1'.
perform bdc_field       using 'RC29P-MEINS'
                              BDCDATA-MEINS.             "'ml'.
perform bdc_dynpro      using 'SAPLCSDI' '0131'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POTX1'.
perform bdc_field       using 'RC29P-SANKA'
                              'X'.
*perform bdc_transaction using 'CS01'.
*perform close_group.
CALL TRANSACTION 'CS01' USING IBDCDATA MODE 'A' UPDATE 'S'.
REFRESH IBDCDATA.
endloop.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR iBDCDATA.
iBDCDATA-PROGRAM = PROGRAM.
iBDCDATA-DYNPRO   = DYNPRO.
iBDCDATA-DYNBEGIN = 'X'.
APPEND ibDCDATA .
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
    CLEAR iBDCDATA.
    iBDCDATA-FNAM = FNAM.
    iBDCDATA-FVAL = FVAL.
    APPEND iBDCDATA .
ENDIF.
ENDFORM.

Hi,
the BDCDATA structure must be fnam, fval,dynbegin,dynpro,program.
You have to declare like this and pass this in your CALL TRANSACTION statement.
Please give some other table name for BDCDATA you declared for and also for IBDCDATA.

How to delete records from dynamic internal table.

Hi Experts,
Need urgent help!!!
Issue is with Dynamic internal tables.
Below is code written by me :
FORM select_query USING Lw_tabnam
                  TYPE t682i-kotabnr.
DATA : lw_line TYPE REF TO data,
          lw_line1 TYPE REF TO data.
    CREATE DATA Lw_line    TYPE (lw_TABNAM).
    ASSIGN      Lw_line->* TO   <WA_tbl>.
    CREATE DATA LW_LINE    TYPE STANDARD TABLE OF (Lw_tabnam)
                           WITH NON-UNIQUE DEFAULT KEY.
    ASSIGN      Lw_line->* TO <TBL>.
    SELECT * FROM (Lw_tabnam)
             INTO CORRESPONDING FIELDS OF TABLE <TBL>
             WHERE (t_keys).
Endform.
code is working fine.
here even the table name and where condition are dynamic,everything is fine upto this point.
Now i have to delete some record from <TBL> based on some conditons.
     for ex : ( here lc_fieldname is KUNNR)
      loop at t_kunnr.
          lw_tabix = sy-tabix.
        Read table <tbl>
                with key (lc_fieldname) = t_kunnr-kunnr ASSIGNING <wa_tbl>.
        If sy-subrc = 0.
        *Delete
        delete <tbl> from <wa_tbl>
delete <tbl> index lw_tabix.
        Endif.
     Endloop.
The above delete statement doesn't work ,even we can't use index as it gives a syntax error " something related to "index is not allowed in standard table or hash table.
Can you help me ab't how to delete records in Dynamic internal table?
Other option that i am thinking of is to create a static table of type dynamic table.
means, data itab type standard table of <tbl> .I know the syntax is wrong ,however is there any way to do this?
Thanks in advance ,
If you have any suggestion ab't this then do let me know.
bye,
Gaurav.

Hi
I wrote this code and it works fine:
DATA LW_TABNAM(10) VALUE 'LFA1'.
DATA : LW_LINES TYPE REF TO DATA,
       LW_LINE TYPE REF TO DATA.
FIELD-SYMBOLS: <TABLE> TYPE TABLE,
               <WA>    TYPE ANY.
CREATE DATA LW_LINES TYPE TABLE OF (LW_TABNAM)
WITH NON-UNIQUE DEFAULT KEY.
ASSIGN LW_LINES->* TO <TABLE>.
CREATE DATA LW_LINE TYPE (LW_TABNAM).
ASSIGN LW_LINE->* TO <WA>.
DO 10 TIMES.
APPEND INITIAL LINE TO <TABLE>.
ENDDO.
SY-TABIX = 4.
DELETE <TABLE> INDEX SY-TABIX.
WRITE SY-SUBRC.
I hope it help you
Max

How to display more than 200 rows in the table?

Hi Experts,
Is that possible to display more than 200 rows in a Table.
when i query from table, it has 1000 rows, i want to display all the 1000 rows in the Table.
when i query, the values are displaying up to 201 rows only,
when i click next on 200 - 201 it throws Exception says
*"Query has exceeded 200 rows. Potentially more rows exist, please restrict your query."*
let me know how to display all the 1000 rows in a table without Exception.
Any idea will be highly appreciated.
Thanks
Aswath

The number of rows retrieved is controlled by profile option "FND: View Object Max Fetch Size". I believe 200 is the default value. Pl see these MOS Docs
386402.1- Query Has Exceeded 200 Rows
275876.1 - Oracle Application Framework Profile Options Release 11i (11.5.10)
HTH
Srini

How to get the last record of an internall table ....

Hi All..
i want to get the last record of an internal table itab, and i want the the value of the last record.

Hi,
     Use describe statment.
data: lv_line type i.
    Describe table itab lines lv_line.
    read table itab into wa_itab index lv_line.
regards,
Santosh Thorat

How to collect similar record from the internal table

I need to collect exact matched records from 1 internal table to another internal table by searching 5 fields. I need to have records which are exactly matched for 5 fields. i have written a code wich is mention below it gave me only similar records but not 100% matched record.. would you like to help me. any correction, suggetion,. Will be great help to me.

To get exact match of 5 records, do as follows.
Check whether internal table gives only one record or not after READ statement.If internal table gives more than one entry for READ then the results will be improper.
I think there is no need of READ statement on same internal table within LOOP. I commented the same in code.
sort i_bp_p by title initials name_last idnumber idtype f50code rbcode. "acc_num.
loop at i_bp_p into wa_i_bp_p.
*lv_tabix = sy-tabix.
*read table i_bp_p index lv_tabix into wa_i_bp_p.read table i_but0id into wa_but0id with key idnumber = wa_i_bp_p-idnumber
idtype = wa_i_bp_p-idtype binary search.
if sy-subrc = 0.
read table i_but000 into wa_but000 with key title = wa_i_bp_p-title
initials = wa_i_bp_p-initials
name_last = wa_i_bp_p-name_last binary search.
if sy-subrc = 0.
read table i_but0is into wa_but0is with key f50code = wa_i_bp_p-f50code
rbcode = wa_i_bp_p-rbcode binary search.
if sy-subrc = 0.
move-corresponding wa_i_bp_p to i_bp_p100.
append i_bp_p100.
endif.
endif.
endif.
endloop.
sort i_bp_p100 by partner.
loop at i_bp_p100.
write : /10 i_bp_p100-partner,
20 i_bp_p100-title,
30 i_bp_p100-initials,
40 i_bp_p100-name_last,
53 i_bp_p100-idnumber,
70 i_bp_p100-idtype,
85 i_bp_p100-rbcode,
95 i_bp_p100-f50code.
endloop.
sort i_bp_p by title initials name_last idnumber idtype f50code rbcode. "acc_num.
loop at i_bp_p into wa_i_bp_p.
lv_tabix = sy-tabix.
read table i_bp_p index lv_tabix into wa_i_bp_p.
if sy-subrc = 0.
read table i_but0id into wa_but0id with key idnumber = wa_i_bp_p-idnumber
idtype = wa_i_bp_p-idtype binary search.
if sy-subrc = 0.
read table i_but000 into wa_but000 with key title = wa_i_bp_p-title
initials = wa_i_bp_p-initials
name_last = wa_i_bp_p-name_last binary search.
if sy-subrc = 0.
read table i_but0is into wa_but0is with key f50code = wa_i_bp_p-f50code
rbcode = wa_i_bp_p-rbcode binary search.
if sy-subrc = 0.
move-corresponding wa_i_bp_p to i_bp_p100.
append i_bp_p100.
endif.
endif.
endif.
endif.
endloop.

Count the Records in an internal table without a loop.

How do i count the number of records in an internal table without using the loop statement.
The Describe statement give the total no. of records in the internal table.But i want the count of the key fields in the internal table
For eg
Row Field
1       A
2       A
3       A
4       B
5       B
6       C
Count of A = 3
Count of B = 2
Count of C = 1

Dilip,
I think isn't posible. Only 3 ideas:
1ª, make other table "table2", similar to your actual table.
     table2[] = yourtable[].
     delete table2 where key <> 'A'.
     describe table table2 lines contA.
    But depending the amount of data, you may have problems in performance or memory consumption...
2ª, make other table, only with the keys fields and a count field,
    data begin table2
       key_field1,
       cont type i.
    end data.
   when you append lines to yourdata, make a collect to this table:
    table2-keys = yourtable-keys.
    table2-cont = 1.
   collect table2.
   But only works if you can modify the program where data is appended, and you may be carefull when data is deleted :-(...
3ª if your data if filled in a select, you may fill the table2 of point 2ª, making a similar select but:
   select keyfields count( * ) into table table2
from ...
where (the same you have to fill your original table...)
   group by keys.
But you have the same problem is data is deleted later...
I hope that any of the three is useful for you...
Edited by: Diego Alvarez on Jan 5, 2010 5:09 PM

Count number of records in a internal table

hi
i want to count number of records in internal table
pls let me know how to count the number of records in a internal table.
regards
Arora

hi
one way is
data field type i.
Decribe table itab lines field.
write: / field.
displays the no of records in tha internal table
or if u want to write logic.
data:
w_count type i.
loop at itab.
w_count = w_count + 1.
endloop.
write: / w_count.
displays the no of records.
reward points if useful.

Grouping records in an internal table

Dear all,
Pls follow the code and suggest me to get the specified format.
Consider that i have created a view to populate the reqd data and collect those in an internal table and do a calculation for one field and modify the internal table.
when i pass this internal table to the function reuse_alv_grid , it throws out a report. But if i need to group the records of the internal table based on three fields, can i do that , if so , how should i do that, if not what method shud i adopt to get the grouped listing in ALV.
kindly give your views.
Code goes here..........
select distinct edatu j_3akvgr6 mvgr4 matnr bismt vbeln auart bstkd bstkd_e ihrez_e
bstdk_e bstdk bezei vrvez brgew ntgew volum werks kwmeng j_3asize posnr
INTO CORRESPONDING FIELDS OF TABLE itabdelshd
from ZVDELISHED
where J_3AKVGR6 IN CUSTOMER AND AUART IN ORDTYP
AND BISMT IN STYLE AND MATNR in FGMtrl AND bstdk_e IN PLNDATE
AND J_3ASIZE IN GRIDVAL and werks in plant and mvgr4 in ppmon and
bstkd in cpono and vbeln in Sales.
LOOP AT itabdelshd INTO wadelshd.
      select sum( wmeng ) as tqty into wasumqty-tqty
      from vbep where edatu = wadelshd-edatu and vbeln = wadelshd-vbeln
      and j_3asize = wadelshd-j_3asize.
      select sum( lfimg ) as dqty into wasumqty-dqty
      from lips where vbelv = wadelshd-vbeln and j_3asize = wadelshd-j_3asize
      wadelshd-PLND_QTY = wasumqty-tqty - wasumqty-dqty.
      wadelshd-PLND_QTY = wadelshd-wmeng - wadelshd-lfimg.
      wadelshd-COLOR = wadelshd-j_3asize(4).
      MODIFY itabdelshd FROM wadelshd.
ENDLOOP.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.

Dear Jorge,
It is working out, But i need to do the sum for the grouped data, for instance , if the below data is grouped data seen in the alv,
sales ord      | color    line.Item| Ord.qty   | Pld.Qty     | Date          "
| 0001000551 | 002V | 100       | 6,800.000 | 1,200.000 | 25.09.2006"
| 0001000551 | 002V | 100       | 6,800.000 | 2,500.000 | 25.09.2006"
| 0001000551 | 002V | 100       | 6,800.000 | 3,100.000 | 25.09.2006"
| 0001000551 | 003K | 200       | 3,200.000 | 700.000    | 25.09.2006"
| 0001000551 | 003K | 200       | 3,200.000 | 1,200.000 | 25.09.2006"
| 0001000551 | 003K | 200       | 3,200.000 | 1,300.000 | 25.09.2006"
and if want to sum the the planed qty based on the line.Item Grouping, meaning, can i get the report in the below form.
sales ord      | color    line.Item| Ord.qty   | Pld.Qty     | Date          "
| 0001000551 | 002V | 100       | 6,800.000 | 6,800.000 | 25.09.2006"
| 0001000551 | 003K | 200       | 6,800.000 | 3,200.000 | 25.09.2006"
what should i do to get this form.

Maximum record length in internal table?

Is there a maximum record length in an internal table? Please note: My question is NOT related to table space. I'm referring only to the length of an individual record (A.K.A. row length).
I am using a work area to insert data into an internal table. Both the work area and internal table are defined by the same structure.
The structure has a total length of 672 bytes. For the sake of this discussion I'll point out that at the end of the structure, bytes 669, 670, 671, and 672 are four separate fields of 1 character each.
When viewing the work area record in the debugger I'm seeing all the fields and all the values. When viewing the internal table in the debugger after a record is inserted, the internal table ends with the field defined at Byte 670. The internal table does not include the two fields defined at Bytes 671 and 672.
Am I to assume from the above explanation that the length of a record ( A.K.A. row) in an internal table cannot exceed 670 bytes?
Thank you.

Manish,
False alarm! While, technically, you didn't answer my question, your request for code ended up helping me answer my own question.
To provide you with some code I wrote a simple test program using the record layout referred to above, with a DO loop to put some records into the internal table, followed by a LOOP AT, with accompanying WRITE statements to display the contents of the internal table and demonstrate that the last two fields weren't being stored.
However, when I ran the test program, the last two fields were being displayed.
It was at that point, when stepping through the debugger that I noticed the scroll arrows above the last column of my internal table that allowed me to scroll to the right and see my final two fields.
Apparently, because of the large number of fields in my internal table I had reached the default display length of the debugger. While I was obviously aware of the scroll bar found at the bottom of the display, I had never worked with an internal table of that width in the past and hadn't even noticed the scroll arrows above the last column before.
Thanks for taking the time to respond helping me get to the solution.

@Inserting Records in an Internal Table

Hi,
How can I Insert records in an internal table..such that i can insert the records somewhere in the middle based on the entry in a field?

INSERT wa INTO TABLE itab INDEX idx .
Effect
This variant can only be used for standard tables and sorted tables. Each line line_spec to be inserted into the line before the table index idx and the table index of the following lines is increased by one. A data object of the type i is expected for idx.
If idx contains a value equal to the number of the existing table lines plus one, the new line is appended as the last line in the internal table. If idx contains a greater value, no line is inserted and sy-subrc is set to 4.
An exception that cannot be handled is raised when:
idx contains a value less than or equal to 0
A line to be inserted would cause a duplicate entry in tables with a unique table key
A line to be inserted would disrupt the sort order of sorted tables
Within a LOOP loop, you can omit the addition INDEX. Each line to be inserted is inserted before the current table line of the LOOP loop. However, if the current line is deleted in the same loop pass, the response is undefined.

How to display first three records of an internal table

Similar Messages

Maybe you are looking for