How to display hidden columns in Management Cockpit Reports

Hi all,
I need to display columns with zero values in a management cockpit report graph. I think the report had been set to hide columns without values and only brings charactesitics whose values are not equal to zero.
Could anyone help?
Thanks in advance.
Sezin

HI,
After you are executing the report, on columns right click & select filter options-> if 0 values will be there then you can filter it by 0 & get the report

Similar Messages

How To Display All columns of a BI Report in EP

Hi Gurus,
We have integrated BI with EP and published BI reports in EP.The problem is in the EP-IVIEW the full report is not showing.Suppose the report has 8 columns then only 4 of them are showing.To view the other columns user needs to click on the next button of the report table.But from the BI side it is showing all the columns in Bex.As the client wants i want to display all the columns at a time.Is there any way out for displaying this?
Regards
Indranil

Finally the issue resolved. There are two options to resolve the issue.
1.you need to change the template 0ANALYSIS_PATERN in the Bex and set the default column side for changing it globaly
or
2.you need to append the parameter block_columns_size=0 in the query string of the iview.
Regards
Indranil

How to Display Sub-Columns using ALV Grid

Hi ,
Could someone tell me how to display sub-columns under a parent column using ALV Grid. Do we have any standard Program which has this scenario. Please let me know.
Thanks,
Abaper.
Message was edited by:
 ABAP'er

you can check all with BCALV* or RSDEMO* in SE38 for all Std
check below
BCALV_DND_01 Drag ALV Row to Tree Folder
BCALV_DND_02 Drag Icons from Tree to Rows of the Grid
BCALV_GRID_DND_TREE ALV Grid: Drag and Drop with ALV Tree
BCALV_GRID_DND_TREE_SIMPLE ALV GRID: Drag and drop with ALV tree (simple)
BCALV_TEST_COLUMN_TREE Program BCALV_TEST_COLUMN_TREE
Rewards if useful............
Minal

How to display dynamic column added by vo.addDynamicAttribute in jspx?

Hi,
I met problem when programmatically add cloumn and display it on screen. Here are my steps:
0. define a ViewObject using xml. Define a transient column Addtion2. later will add a dynamic column Addtion3, but not defined here.
1. Implement Application Module, adding a method init() and expose it to client.
2. In init() method, get target VO and use vo.addDynamicAttribute("Addition3"). Then iterate it use row.setAttribute("Addition3", Math.random()). Add init() to page binding and invoke it.( it's invoked )
3. In jspx, use dynamic table. But Addition3 never shows up.
This is my last question: Re: How to display dynamic column added by vo.addDynamicAttribute in jspx? People say I should use dynamic table.
please have a look at my code:
Application Module: when it runs, it will print 6 coulmns. vo.getAttributeCount() is 6.
<pre>
public void init() {
ViewObject vo = this.getCountryView1();
if (vo.getAttributeIndexOf("Addition3") == -1) {
vo.addDynamicAttribute("Addition3");
vo.executeQuery();
for (AttributeDef deft : vo.getAttributeDefs()) {
System.out.println(deft.getColumnName() + ": " + deft.getName());
RowSetIterator it = vo.createRowSetIterator("i1");
while (it.hasNext()) {
Row r = it.next();
r.setAttribute("Addition2", Math.random());
r.setAttribute("Addition3", Math.random());
it.closeRowSetIterator();
for (AttributeDef deft : vo.getAttributeDefs()) {
System.out.println(deft.getColumnName() + ": " + deft.getName());
System.out.println(vo.getAttributeCount()); //vo.getAttributeCount() is 6
</pre>
jspx: when it runs, only 5 columns are shown. Column Addition2's values are set as expected. but Column Addition3 never shows up. And #{bindings.CountryView1.attributeCount} shows 5.
<pre>
<af:table rows="#{bindings.CountryView1.rangeSize}"
fetchSize="#{bindings.CountryView1.rangeSize}"
emptyText="#{bindings.CountryView1.viewable ? 'No data to display.' : 'Access Denied.'}"
var="row" rowBandingInterval="0"
value="#{bindings.CountryView1.collectionModel}"
selectedRowKeys="#{bindings.CountryView1.collectionModel.selectedRow}"
selectionListener="#{bindings.CountryView1.collectionModel.makeCurrent}"
rowSelection="single" id="t1">
<af:forEach items="#{bindings.CountryView1.attributeDefs}" var="def">
<af:column headerText="#{def.name}"
sortable="true" sortProperty="#{def.name}" id="c1">
<af:outputText value="#{row[def.name]}" id="ot1"/>
</af:column>
</af:forEach>
</af:table>
<af:forEach items="#{bindings.CountryView1.attributeDefs}" var="def">
<af:outputText value="#{def.name}" id="ot2"/>
</af:forEach>
<af:outputText value="#{bindings.CountryView1.attributeCount}" id="ot3"/>
</pre>
it's quite weird for me. The vo.getAttributeCount() is 6, but #{bindings.CountryView1.attributeCount} shows 5. And column Addtion3 never shows up.
what's the matter? How can I show the dynamic added column Addtion3?
Edited by: simon li on 2012-9-10 下午7:31
Edited by: simon li on 2012-9-10 下午8:00

Hi,
Can you check the tree binding (CountryView1 - in the pagedef) and see it has the 5 attributes hardcoded in it. If yes, try removing everything and then run the page to see if it works fine.
-Arun

How to Display Sub-Columns using ALV

Hi experts,
 Could someone tell me how to display sub-columns under a parent column using ALV. Do we have any standard Program which has this scenario. points are guaranteed for the right answer.
Thanks in advance
Sreenivas

you can check all with BCALV* or RSDEMO* in SE38 for all Std
check below
BCALV_DND_01 Drag ALV Row to Tree Folder
BCALV_DND_02 Drag Icons from Tree to Rows of the Grid
BCALV_GRID_DND_TREE ALV Grid: Drag and Drop with ALV Tree
BCALV_GRID_DND_TREE_SIMPLE ALV GRID: Drag and drop with ALV tree (simple)
BCALV_TEST_COLUMN_TREE Program BCALV_TEST_COLUMN_TREE
Rewards if useful............
Minal

How to display username in RTF BI publisher report?

Please advice how to display username in RTF BI publisher report?
May be this can be done via hidden parameter of BIP report which default value will be set up with macro like {$username$} (or smth like)?
Thanks in advance!

Thanks. That worked. I was trying to get it as part of a multi-table query, aliasing dual. But that doesn't work in SQL Plus either so I guess I can't do that.
I was trying
select o.*, d.:xdo_user_name
from oblix_audit_events o, dual d
Before that I was trying
select
:xdo_user_name as USER_ID,
:xdo_user_roles as USER_ROLES,
:xdo_user_report_oracle_lang as REPORT_LANGUAGE,
:xdo_user_report_locale as REPORT_LOCALE,
:xdo_user_ui_oracle_lang as UI_LANGUAGE,
:xdo_user_ui_locale as UI_LOCALE
from dual
but I must have fat fingered something because that works now too. Thanks.
So if I need to do this in it's own query and I'm using an RTF template, how do I make that work?
If I have to do it with it's own

How to create some columns dynamically in the report designer depending upon the input selection

Post Author: ekta
CA Forum: Crystal Reports
how to create some columns dynamically in the report designer depending upon the input selection
how export this dynamic report in (pdf , xls,doc and rtf format)
report format is as below:
Element Codes
1
16
14
11
19
10
2
3
Employee nos.
Employee Name
Normal
RDO
WC
Breveavement
LWOP
Sick
Carers leave
AL
O/T 1.5
O/T 2.0
Total Hours
000004
PHAN , Hanh Huynh
68.40
7.60
76.00
000010
I , Jungue
68.40
7.60
2.00
5.00
76.00
000022
GARFINKEL , Hersch
66.30
7.60
2.10
76.00
In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
Can anybody help me how do I design such report....
Thanks

Hi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu

How to display a message in an audit report?

hello all,
i would like to ask how do display a message in an audit report. here is my code...
CALL TRANSACTION tcode USING i_bdcdata
 MODE c_n
 MESSAGES INTO i_error2.
IF sy-subrc EQ 0.
ENDIF.
CLEAR i_error2.
LOOP AT i_error2.
IF i_error2-msgtyp EQ c_e.
 MOVE v_pernr TO i_bdcerror2-pernr.
 MOVE c_infotype TO i_bdcerror2-infty.
 MOVE 'Error' TO i_bdcerror2-msgtype.
 SELECT SINGLE text
 INTO v_msgtxt
 FROM t100
 WHERE sprsl = i_error2-msgspra
 AND arbgb = i_error2-msgid
 AND msgnr = i_error2-msgnr.
 MOVE v_msgtxt TO i_bdcerror2-msgtxt.
 APPEND i_bdcerror2.
ENDIF.
ENDLOOP.
DESCRIBE TABLE i_bdcerror LINES v_bdcerrors.
IF v_bdcerrors <> 0.
SKIP 1.
WRITE: 'BDC Error Report'.
SKIP 1.
WRITE: 'PERNR',
 'INFOTYPE',
 'MESSAGE TYPE',
 'MESSAGE TEXT'.
ULINE.
LOOP AT i_bdcerror.
 WRITE: / i_bdcerror-pernr,
 13 i_bdcerror-infty,
 22 i_bdcerror-msgtype,
 35 i_bdcerror-msgtxt.
ENDLOOP.
ENDIF.
the message text that i was getting contains &1, &2 and so on. how would i be able to replace it with the original value?
thanks!
-ann

After calling the transaction, this is what I do.
a) Call the function module, MESSAGE_TEXT_BUILD and pass the following values from BDCMSGCOLL or the internal table where you collect the messages.
 i) MSGID
ii) MSGNR
iii) MSGV1
iv) MSGV2
 v) MSGV3
vi) MSGV4
There is no need to fetch data using select from table t100.
It builds the message and returns in MESSAGE_TEXT_OUTPUT which can be then displayed to user.
Regards,
Subramanian V.

How to display special characters in APEX Classic Report column

Ref: Thread: How to display newline characters as new lines
Version: APEX 3.2
Hi,
I have created an classic SQL Report with one of the columns being a decode that gives a value 'Post'(the value should be highlighted in Red) on one condition and 'Pre' on another. I have followed the advice given in the page (URL provided above) , i.e. I have changed Strip HTML to 'No', changed Display as to 'Display as text (escape special characters, does not save state)'. I have also passed this value back to the same page to be stored in a page item each time a link (another column in report) in report is clicked. I have tried passing it as #DEADLINE# and \#DEADLINE#\. The issue I face is, instead of the value being highlighted in Red, it gets passed back as a string holding the value 'Post'. Is there any way I can get this to display as it should without the Strip HTML being changed to 'Yes'.
Thanks very much.
Rohi
Edited by: Rohi on 18-Jul-2012 04:21

876651 wrote:
Hi,
Thanks for your response.
I am trying to display a page item that is derived from a report column based on a click on the URL link (*view >*>)
This page item (here, it is Manager_ID) should ideally be highlighted when a particular condition is satisfied (achieved using a DECODE in the report).
But it is not displayed like it should be.
I do not want the value to be displayed along with the html tags as a string.
I want the html tags to take effect and highlight the value within it.
Initially, I had set Strip HTML to Yes and the value was returned without any highlighting .
So I changed it to 'No' and and it contained the html tags.
I am not sure what setting in APEX Report Attributes can help me achieve that effect I want.None of the report settings are relevant. They affect the rendering of the report and none of the columns you were changing the properties of were actually rendered.
You can't pass HTML and CSS around in URL parameters.
I suggest you pass *2* values in the column link: the MGR ID and a simple class or colour value computed by the DECODE in the report. I've suppressed the first version of the report and created a new one that does this:
decode(dept.deptno, '30', 'c00', '000') highlight The link column now passes the MGR ID and the HIGHLIGHT colour (red when the condition is satisfied and black when it is not).
I created another hidden and protected page item <tt>P0_HIGHLIGHT</tt> as the target for the highlight value, and used the Pre/Post Element Text properties of the <tt>P0_G_MGR</tt> to wrap it in a <tt>span</tt> whose colour is changed using the <tt>P0_HIGHLIGHT</tt> value as a subtitution string:
Having done that, I still don't really get the requirement here. I'm sure that given the full picture I'd be using a completely different approach...

Value range(column chart): management cockpit

Hi friends,
how can i put value range condition in column chart. my situation is like this
I have 10 employees with expereinces 4.1(i.e 4 yrs 1 month),5.5, 1.2, 0.5, 3.5, 0.2, 4, 6, 7 and 8.
I want to present in column chart in x-axis like <1 yrs, 2-4,5-6,>7 and in y-axis count.
How can i achieve this. I maintained calculated keyfigues(for <1 yrs, 2-4,5-6,>7) on key figuer total experience and, in bi report i'm getting correct output. Even total experience is also calculated key figure and perfectly viewing this value in cockpit. But in managment cockpit, remaining calculated keyfigues(<1yrs,2-4,5-6,>7) i'm not getting. So i want to prefer to set value range in chart.
pls suggest me.
thanks,
raju

Hello Raju,
You can achieve this by simply using a User defined Periodization & Time Variable.
http://help.sap.com/saphelp_sem60ep1/helpdata/en/1b/3131375fc9342ae10000009b38f839/frameset.htm
Defining Periodizations
1. To define a periodization, choose Periodization in the dialog structure.
2. Choose to switch to change mode.
3. Choose New Entries.
4. In the Periodization column, enter a name for the periodization (up to four characters).
5. In the Fiscal Year Variant column, choose the fiscal year variant on which you want to base the periodization. (The periodization itself is based on periods of the fiscal year variants.)
6. In the Long Text column, enter a descriptive name for the periodization.
7. Save your entries and return.
8. In the list of periodizations, select the periodization you just created.
9. Choose Interval in the Dialog Structure.
10. Choose New Entries.
11. In the Interval No. column, enter a sequential number for each period to be defined, starting with "1".
12. Specify the left time limit (= Start column) and the right time limit (= End column) of the range by entering the respective period of the fiscal year variant on which it is based.
Eg: In your case you follow this
 Start Column End Column
Period 1(<1 yrs) 1 12
Period 2(2-4 yrs) 13 36
Period 3(5-6 yrs) 37 60
Period 4(>7 yrs) 61 specify the no. of months you want to calculate for
13. Save your entries and return
In the Cockpit-Frame-Design screen for the mesures(KPI) on the Y-axis you select the check box of Periodization and select this User defined Periodization created by you. You click on the aggregation box too to get the cummulative value for the defioned periods.
Hope this helps. Revert incase of any query or let me know if it doesnot work as I have tried this with quarters and its working fine in my case.
Regards,
Priyanka Singh

OBIEE:How to display row/columns where no data is present in pivot results?

I have a request from some team members to provide an OBIEE report of 7 teams and the number of open incidents for each team by week.
I was able to create the pivot listing the teams vertically and the age (by week#: 1 week, 2 weeks, 3 weeks, 4 weeks & > 4weeks) horizontally.
The dilemma I have is that of the 7 teams that have incidents tickets only 4 of them have data, thus only those 4 teams that have ticket data show up in my pivot. I would like to be able to reflect ALL 7 teams even if representing a dash or null value across the pivot for those teams that don't have data.
Does anyone know if this is possible and if so, how would I do this? I've tried searching the internet and found out how to replace a null value with a dash in columns/rows when a cell is null. But not how to display an entire row (or column) where no data is present.
Edited by: coutya on May 22, 2012 11:01 AM
Edited by: coutya on May 22, 2012 11:02 AM

You are correct; if there are no data at all, those teams won't show in a pivot table. NULLs or dashes only work if a particular column is null. There are two ways to accomplish what you wish. The first example I thought when I wasn't aware of being able to do a LEFT OUTER JOIN in Answers using the Advanced tab. The first method works nicely, though and is simpler to execute.
Read my solution here:
Re: Section Values showing NULL in Pivot
To do the LEFT OUTER JOIN read this:
http://gerardnico.com/wiki/dat/obiee/multiple_subject_area
Both will get you what you want...

How to display the column header in two rows?

Hi Experts,
I am using ALV_LIST_DISPLAY i neeed to display the column header in two rows.. How can i do that?
Ex: purchase order i need to display "purchase" in one row and "order" in second row.
Thanks in advance,
Sarath.j

REPORT zpwtest .
TYPE-POOLS slis .
DATA : layout TYPE slis_layout_alv .
CONSTANTS : c_len TYPE i VALUE 20 .
TYPES : BEGIN OF ty_t100          ,
          sprsl TYPE t100-sprsl   ,
          arbgb TYPE t100-arbgb   ,
          msgnr TYPE t100-msgnr   ,
          text TYPE t100-text    ,
          fline TYPE t100-text    ,
        END OF ty_t100            .
TYPES : BEGIN OF ty_wrd   ,
         text TYPE char20 ,
        END OF ty_wrd     .
DATA : it_t100     TYPE TABLE OF ty_t100 ,
       it_sentence TYPE TABLE OF ty_wrd ,
       wa_t100     TYPE ty_t100          ,
       wa_word     TYPE ty_wrd           ,
       v_repid     TYPE syst-repid       ,
       v_tabix     TYPE syst-tabix       .
DATA : it_fld TYPE slis_t_fieldcat_alv ,
       it_evt TYPE slis_t_event        ,
       wa_fld TYPE slis_fieldcat_alv   ,
       wa_evt TYPE slis_alv_event      .
INITIALIZATION .
v_repid = sy-repid .
START-OF-SELECTION .
* Get data
SELECT *
    INTO TABLE it_t100
    FROM t100
   WHERE sprsl = 'EN'
     AND arbgb = '00' .
LOOP AT it_t100 INTO wa_t100 .
    v_tabix = sy-tabix .
    CLEAR : it_sentence .
    CALL FUNCTION 'RKD_WORD_WRAP'
         EXPORTING
              textline = wa_t100-text
              outputlen = c_len
         TABLES
              out_lines = it_sentence.
    IF NOT it_sentence IS INITIAL .
      READ TABLE it_sentence INTO wa_word INDEX 1 .
      wa_t100-fline = wa_word-text .
      MODIFY it_t100 FROM wa_t100 INDEX v_tabix .
    ENDIF.
ENDLOOP.
* Prepare fieldcatelog
CLEAR wa_fld .
wa_fld-fieldname = 'SPRSL' .
wa_fld-ref_tabname = 'T100' .
wa_fld-ref_fieldname = 'SPRSL' .
APPEND wa_fld TO it_fld .
CLEAR wa_fld .
wa_fld-fieldname = 'ARBGB' .
wa_fld-ref_tabname = 'T100' .
wa_fld-ref_fieldname = 'ARBGB' .
APPEND wa_fld TO it_fld .
CLEAR wa_fld .
wa_fld-fieldname = 'MSGNR' .
wa_fld-ref_tabname = 'T100' .
wa_fld-ref_fieldname = 'MSGNR' .
APPEND wa_fld TO it_fld .
CLEAR wa_fld .
wa_fld-fieldname = 'FLINE' .
wa_fld-inttype      = 'CHAR' .
wa_fld-outputlen = 20 .
wa_fld-intlen    = 20.
wa_fld-seltext_l = 'Text' .
wa_fld-ddictxt = 'L' .
APPEND wa_fld TO it_fld .
* Get event.. we will handle BOFORE and AFTER line output
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       IMPORTING
            et_events = it_evt.
READ TABLE it_evt INTO wa_evt
WITH KEY name = slis_ev_after_line_output .
wa_evt-form = slis_ev_after_line_output .
MODIFY it_evt FROM wa_evt INDEX sy-tabix .
READ TABLE it_evt INTO wa_evt
WITH KEY name = slis_ev_top_of_page .
wa_evt-form = slis_ev_top_of_page .
MODIFY it_evt FROM wa_evt INDEX sy-tabix .
layout-no_colhead = 'X' .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            i_callback_program = v_repid
            it_fieldcat        = it_fld
            is_layout          = layout
            it_events          = it_evt
       TABLES
            t_outtab           = it_t100.
*       FORM top_of_page                                              *
FORM top_of_page .
    uline .
    WRITE: / sy-vline     ,
           10 sy-vline    ,
           11 'line1'     ,
           31 sy-vline    ,
           37 sy-vline    ,
           58 sy-vline    .
    WRITE: / sy-vline     ,
           10 sy-vline    ,
           11 'line2'     ,
           31 sy-vline    ,
           37 sy-vline    ,
           58 sy-vline    .
    WRITE: / sy-vline     ,
           10 sy-vline    ,
           11 'line3'     ,
           31 sy-vline    ,
           37 sy-vline    ,
           58 sy-vline    .
ENDFORM.
*       FORM AFTER_LINE_OUTPUT                                        *
FORM after_line_output   USING rs_lineinfo TYPE slis_lineinfo .
CLEAR : it_sentence ,
          wa_t100     .
READ TABLE it_t100 INTO wa_t100 INDEX rs_lineinfo-tabindex .
CHECK sy-subrc = 0 .
CALL FUNCTION 'RKD_WORD_WRAP'
       EXPORTING
            textline = wa_t100-text
            outputlen = c_len
       TABLES
            out_lines = it_sentence.
DESCRIBE TABLE it_sentence LINES v_tabix .
CHECK v_tabix > 1 .
LOOP AT it_sentence INTO wa_word FROM 2 .
    WRITE: / sy-vline     ,
           10 sy-vline    ,
           31 sy-vline    ,
           37 sy-vline    ,
           38 wa_word-text ,
           58 sy-vline .
ENDLOOP.
ENDFORM .

How to display nodestamp column in ApplicationsTreeTable -ViewMenu- Columns

I have ApplicationsTree table on my UI screen with the columns ex: col1, col2, col3, col4.
col1 is inside node stamp.
col1 is not displaying under View Menu -> Columns.
How can I display nodestamp column in ViewMenu -> Columns?
Thanks,
Swathi

select a column, then use the contextual menu for the column and select "Add Column Before" or "Add Column After"
you can also highlight a column then use the key combination:
<option> + <right arrow> to add a column after (or to the right) and
<option> + <left arrow> to add a column before (or to the left)

How to Display 10 columns in first page,next columns in second page in smartforms in sap.

In internal table having 30 columns of data.
i have to display like
first 10 columns in first page with page no :1
second 10 columns in second page with page no :2
third 10 columns in second page with page no :3
how to develop this.
please how develop this in smartforms .
please help .

Hi,
You dont have to divide the data.
You must be using TABLE node in your smartform to display the table.
Copy the node 2 times more so that the total table nodes become 3.
Now, change the headings in each table according to the column you want to display.
Change the fields of the workarea in the ITEM lines accordingly.
Add a COMMAND node after each table and set it to go to next page.
E.G :
Suppose I have a table with 6 columns and I need to display 2 columns in a table then page break.
Work area name is WA.
Then first table will have headings : FIELD1 FIELD2
Items will have field     :     WA-FIELD1 WA_FIELD2
COMMAND NODE : Go to Next Page
Second table will have heading : FIELD3 FIELD4
Items will have field     :     WA-FIELD3 WA_FIELD4
COMMAND NODE : Go to Next Page
Third table will have heading : FIELD5 FIELD6
Items will have field     :     WA-FIELD5 WA_FIELD6
So, same table with same work area will be used 3 times, displaying different set of columns in each TABLE node.
Regards,
Ashish

How to make hidden columns shown on Fusion Audit Report.

I have several questions about Fusion Audit Report here:
1. How to create Business Object Attributes, the seeded ones can't meet client's requirement.
2. I can see from the audit report that, there are 10 columns hidden, how to show them? someone said to export the report, then hidden columns will show, I tried, it is not working for me.
3. How to set date range as parameters.

Hi,
1. The creation of business object attributes depends on the customization options available to you. In summary it's really only Design Time Customization (JDeveloper) or Application Composer that permit business object attribute assition. Check out this document for details.
https://docs.oracle.com/cd/E51367_01/fa_lcm_gs/OADTC/fa-cust-extend-intro.htm#OADTC157
2. Do you mean in the Configure Business Object Attributes? Does the View menu on the table not allow this?
3. Use the Date dropdown and pick Between.
In addition, please review the following resources related to using the Audit report.
https://www.youtube.com/watch?v=bDzf99UvlT8&list=PL1ZiAfFIniZeMX-tZnKvxnosy-CUn-eT3&index=5
https://blogs.oracle.com/FunctionalArchitecture/entry/auditing_in_fusion_applications
Kind regards
Richard
FA Developer Relations at blogs.oracle.com/fadevrel

How to display hidden columns in Management Cockpit Reports

Similar Messages

Maybe you are looking for