How to display system date by default

Hi,
Please tell me how to display the default date as system date in a text box, and it should also allow me to select the date from the calendar and update.
i tried to give'select sysdate from dual' but it dint work.
Please help me..
Regards,
Pallavi

I'm not sure what you mean.
sysdate retrieves the current date when the script is executed (eg. when you run the report).
Do you mean that after you change the date value in the report and submit the page, it changes back to sysdate, instead of the date you selected?
This would be caused by an incorrect setting in the "Source Used" field.
eg. use "Only when current value in session state is null"
instead of "Always, replacing any existing value in the session state"

Similar Messages

How to display system date

I want to display system date in portal pages. Is there any template subsitution tags or any easy way of displaying date.
Without using 'javascript'
Thanks
Manjith

You could put something like the following into a PLSQL item or a Dynamic Page portlet (between <ORACLE></ORACLE> tags) - change the date formatting and add any html/css that you need to display the date the way you want:
DECLARE
todaysdate VARCHAR2(12);
BEGIN
select TO_CHAR(SYSDATE,'MON DD, YYYY') INTO todaysdate FROM DUAL;
htp.print(todaysdate);
END;Note: this code could probably be simplified a bit, I just pulled this snippet out of something I use that does more than just display the sysdate.

How to display system date on table cells

hi all,
I would like to display the PC date onto a specified cell on a table. I have attached here my vis. I don't know how to get the date displayed at the table cell On the front panel when I run it. Please help.
Attachments:
data.vi ‏32 KB
getPCdate.vi ‏9 KB

Hi,
The table control is simply a 2D array of string. So all you need to do is to pick up the Date from the appropriate .vi and replace the array element (using replace array subset) and write the whole table back again. (Example attached for LV 6.0.x)
// it takes almost no time to rate an answer
Attachments:
Untitled_1.vi ‏13 KB

Jstl tags to display System date.

Hi there,
Please let me know how to how to display system date on jsp page using jstl.
I dont know much about jstl, and i was till now using java code in jsp instead of jstl.
Since using java in jsp is considered a bad programing these days, I dont want to use java
to display the date.
Can anyone help me switch to jstl tags.
Please help me with the date issue.

[This will help you|http://java.sun.com/products/jsp/jstl/1.1/docs/tlddocs/index.html] learn what JSTL tags are available. Once you get that it should be relatively easy to figure out what you nee. If you have questions on a particular tag then a [Google search almost always|http://www.google.com/search?q=jstl+fmt%3AformatDate] brings up example usage.

[ASK] How to get system date and substring / concate in data manager dynami

Hello guys.
I want to run package DM with the input have default value.
The selection is look like this :
Dimension : CATEGORY
Source : PLAN_2011
Destination : FORECAST_2011
Dimension : TIME
Source : 2011.JAN,2011.FEB,2011.MAR,2011.APR,2011.MAY,2011.JUN,2011.JUL,2011.AUG,2011.SEP,2011.OCT,2011.NOV,2011.DEC
Destination : <same>
How to get system date year and do the substring / concate ?
So dimension category source will be PLAN_<YYYY>, destination = FORECAST_<YYYY>
Dimension source = <YYYY>.JAN,<YYYY>.FEB,<YYYY>.MAR,<YYYY>.APR,<YYYY>.MAY,<YYYY>.JUN,<YYYY>.JUL,<YYYY>.AUG,<YYYY>.SEP,<YYYY>.OCT,<YYYY>.NOV,<YYYY>.DEC
Depend on year system date.
Thank you.

Stuart,How are you storing OnSaleDate. If you are using OnSaleDate as an attribute dimension then you can write a Custom Defined Function to either:1- query your system for the current date and return the number of seconds that have elapsed since 1/1/1970. This is by definition the begining of the Epoch and how Essbase treats Attribute Dimensions of the Date type.public static long getDateInSeconds() { Calendar cal = Calendar.getInstance(); return cal.getTime().getTime()/1000;}2- Write a Custom Defined Function that will accept the OnSaleDate and return the number of days sincepublic static double daysSince(double myDate) { return (getDateInSeconds()-myDate )/86400;}

How to display no data found in RTF template ? XML Publisher

Hi
I have xml file, how to display no data found in RTF template ? XML Publisher ?
This is the XML File
<?xml version="1.0" encoding="UTF-8"?>
<INVALIDSERIALPRODUCT>
<P_ORG_CODE></P_ORG_CODE><P_DATE_RANGE_FROM></P_DATE_RANGE_FROM><P_DATE_RANGE_TO></P_DATE_RANGE_TO><P_ITEM_NUMBER>VIR</P_ITEM_NUMBER><P_LOT_NUMBER></P_LOT_NUMBER><P_RMA_NUMBER_FROM></P_RMA_NUMBER_FROM><P_RMA_NUMBER_TO></P_RMA_NUMBER_TO><P_CUSTOMER_NAME></P_CUSTOMER_NAME><P_EMAIL></P_EMAIL>
<G_SNQ>
<USER_NAME>NSAWHNEY</USER_NAME>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000004</SERIAL_NUMBER>
<RMA_NUMBER>8200000106</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T05:13:05.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000004</SERIAL_NUMBER>
<RMA_NUMBER>8200000106</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T05:52:23.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000016</SERIAL_NUMBER>
<RMA_NUMBER>8200000106</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T05:53:06.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>011000000011</SERIAL_NUMBER>
<RMA_NUMBER>8200000106</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T06:09:16.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number does not exist in Axway Track-n-Trace</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000021</SERIAL_NUMBER>
<RMA_NUMBER>8200000106</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T06:11:09.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000001</SERIAL_NUMBER>
<RMA_NUMBER>8200000066</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T06:46:04.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000001</SERIAL_NUMBER>
<RMA_NUMBER>8200000066</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T07:08:21.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>00000000004 </SERIAL_NUMBER>
<RMA_NUMBER>8200000066</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T07:13:05.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Unknow Error </REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000011</SERIAL_NUMBER>
<RMA_NUMBER>8200000101</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T19:32:00.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000004</SERIAL_NUMBER>
<RMA_NUMBER>8200000107</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-14T02:49:40.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000092</SERIAL_NUMBER>
<RMA_NUMBER>8200000109</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-14T07:52:22.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000031</SERIAL_NUMBER>
<RMA_NUMBER>8200000109</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-15T02:24:27.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000034</SERIAL_NUMBER>
<RMA_NUMBER>8200000109</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-15T02:30:28.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Catchall fault scope has been executed</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000010</SERIAL_NUMBER>
<RMA_NUMBER>8200000114</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-15T03:36:18.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000158</SERIAL_NUMBER>
<RMA_NUMBER>8200000114</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-15T04:19:48.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
</G_SNQ>
</INVALIDSERIALPRODUCT>
thanks
nks

This is the General XML forum.
The homepage description says :
Discussion of the general XML language, standards (XSLT, XQuery, XMLSchema, etc.) and application management issues, suggestions and tips.
The BI Publisher forum is here :BI Publisher
So please mark this post as answered and ask again over there.

How to display all data on one page in web app

Hello.
So I have web app JSF (IceFaces framework) + JBoss all Crystal Report working perfectly. So I have page with Crystal Report tags (e.g.
<bocrv:reportPageViewer reportSource="#{crystalReport.reportPath}" ...
in this report I have table with some data (data from DB) and I want to display this data on one page. Unfortunately now this data are moving to the next page and unfortunately I even donu2019t know how switch to the next page (I see only info e.g. 1with 2).
So how to display this data on one page if its impossible how to torn on pagination.

So I canu2019t do this, I canu2019t display all data on one page (until Iu2019m using JSF tags)?
In JSF tags Iu2019m setting only path to file. In my bean Iu2019m using u201CReportClientDocumentu201D object itu2019s easy way to load report file (u201Copenu201D method) and set parameters (u201CgetDataDefController().getParameterFieldController()u201D method) and also connect to data base (u201Clogonu201D method) but I havenu2019t this property u201CsetSeparatePages(boolean)u201D.
Maybe Iu2019m doing this wrong and there is a simpler way maybe I can use somehow u201CCrystalReportVieweru201D please give my any advice.

How to display the data in XML files into JSP using Jdeveloper.

Hi All,
I have two XML files one XML file has the view names and the other has the table names of a particular views, how to display the data in JSP using JDeveloper where when i click a particular view the list of tables of that particular view from XML file two should be displayed in JSP Page.
Are there any reference documents, regarding the above process please can anyone guide through how to do it.

Let the servlet ask your business tier to provide the data, then stuff it into beans, and pack those into the Session instance. Then forward the request to the JSP, let the JSP get those beans and display them.

SVG Pie chart : how to display no dat found message

Hello,
I have a SVG pie chart and written a message 'no data found' under charts attributes.
If there is no data for the chart,
In IE :the chart region will be blank . chart heading will be displayed and . no 'no data found ' message is displayed.
In mozilla : in the chart region, i can see ,the part of whole page where i display the chart ,is filled . Chart region heading is also displayed.
Could you please reply , how to display 'no data found ' in svg pie chart?
Thanks in advance.
Regards,
Archana

Hello,
I have a SVG pie chart and written a message 'no data found' under charts attributes.
If there is no data for the chart,
In IE :the chart region will be blank . chart heading will be displayed and . no 'no data found ' message is displayed.
In mozilla : in the chart region, i can see ,the part of whole page where i display the chart ,is filled . Chart region heading is also displayed.
Could you please reply , how to display 'no data found ' in svg pie chart?
Thanks in advance.
Regards,
Archana

How to dispaly System date time on Jsff page ?

Friends,
It would be simple question for you , Any one has idea about
How to dispaly System date time on Jsff page using any expression laungage ?
Thanks in Advance

Hi,
I have a solution for you I hope that is helps.
add this to the top of your page...
<jsp:useBean id="now" class="java.util.Date" scope="request" />
so, you want the current date?
<af:outputText value="#{now}"/>
you can use the format for date also.
I hope it is what you want.

Billing date issue - system date as default.

Hi ,
We have a requirement to consider billing date as the system date in creating the billing document.
Requirement.
1. Sales Order is created and Blocked.
2. Sales Order is released the next month.
3. Billing document is created (manually or Batch) after release of the sales order next month.
4. The system considers the requested delivery date as the billing date by default.
5. However, the system should consider the system date as the billing date by default (without manually changing).
Is there any way to achieve this requirement - System should consider the system date as default in creating billing document.
Thanks and regards,
Sheetal

hi
goto VTFA
Select your combination of target billing document n source document i.e. sales document
Click on ITEMS
Select your item category
Data VBRK/VBRP = 11 (Bill. date= Today)
hope this will work

How to display current date in query header?

Hi,
How to display current date in query header?
I use Query Designer for development.
Thanks,
Arun KK

Hi Arun,
You can define fixed header lines and footer lines so that when you generate the query list, they can receive current values of certain fields. When you define a header line or a footer line, you must specify a character string of the type &field, where field is the short name of a field.
This function allows you (for example) to place a sort criterion in the header line.
You can include the following fields as variables in the headers directly:
%NAME
Name of the user processing the query
%DATE
Current date
%TIME
Current time
%PAGE
Current page number (6 characters)
%P
Current page number (3 characters)
These fields can be used in the short forms N,D,T and P. If you want to use these letters as short names for query fields, the field values from the query are used.
You can also see the link
[http://help.sap.com/saphelp_nw70/helpdata/EN/6e/dd68721faf11d6b1d500508b6b8b11/frameset.htm]
Regards,
NR

Mandatory custom metadata field with current system date as default value.

I want to create a custom metadata field of type Date. I want to make it mandatory and want to set its default value as system date.
I have already created field of type Date. What expression I should write to make system date as default value?
Because its a mandatory field, what would happen to existing content. Will there metadata get updated?
Thanks
Sanjeev

I want to create a custom metadata field of type Date. I want to make it mandatory and want to set its default value as system date.
I have already created field of type Date. What expression I should write to make system date as default value?
See http://docs.oracle.com/cd/E23943_01/doc.1111/e10726/c08_config_ref.htm#CSIDO710
>
Because its a mandatory field, what would happen to existing content. Will there metadata get updated?No, it will not be updated - profiles are active only for new or updated items (in fact, they work on front-end).
>
Thanks
Sanjeev

How to convert system Date into DD-MMM-YYYY Format

hi friends,
please help me How to convert system Date into DD-MMM-YYYY Format.
Regards
Yogesh

HI..
data: w_dt(11) type c,
         w_month(2),
         w_mon(3).
w_month = p_date+4(2). **p_date = given date**
case w_month.
when '01'.
w_mon = 'Jan'.
when '02'.
w_mon = 'Feb'.
when '03'.
w_mon = 'Mar'.
when '04'.
w_mon = 'Apr'.
when '05'.
w_mon = 'May'.
when '06'.
w_mon = 'Jun'.
when '07'.
w_mon = 'Jul'.
when '08'.
w_mon = 'Aug'.
when '09'.
w_mon = 'Sep'.
when '10'.
w_mon = 'Oct'.
when '11'.
w_mon = 'Nov'.
when '12'.
w_mon = 'Dec'.
endcase.
Now...
concatenate p_date6(2) '-' w_mon '-'   p_date0(4) into w_dt.
write w_dt.

How to display the data of CJ2C(T-CODE) using web dynpro abap

Hi all:
    How to display the data of CJ2C(T-CODE) using web dynpro abap.
    CJ2C used to display a Gantt Chart.
    Thanks.

Hi,
Create a Value attribute (resource) of type Resource, bind it with the property of File Upload UI element.
On action place the code and Deploy the application
byte[] bytes = new byte[ 1024];
FileOutputStream out = new FileOutputStream( new File( <path in server>));
InputStream in = resource.read( true);
int len;
while( ( len = in.read( bytes)) > 0)
     out.write( bytes, 0, len);
in.close();
out.close();
Regards
     Vinod V

How to display system date by default

Similar Messages

Maybe you are looking for