How to display Various currency categories in same column in ALV grid?

hi..
i wanted to display currency field in a column which has the currency value of different currency categories like US dollar, EURO, Indian Rupees. The thing is,
1. for US dollar it should contain ONLY last 2 decimal pts.
2. for Euro, it should hav contain last 3 decimal pts.
3. For Indian, it should hav contain last 2 decimal pts.
how to achieve this in one column and how to declare it, because it all in same field.
This report is in ALV GRID.
and important is , i also wanted to do the SUM for the total amount which has combinations of all above specified currencies.
how to achieve it.
any answer will be rewarded.?
reply soon.

You need two columns amount and currency code in your internal table, the fields must be of type CURR and CUKY, and the field catalog must link the amount and the currency code. (CFIELDNAME of the amount column contains the name of the currency code column)
The amount will be displayed according to the currency code definition in customizing, and will be summed by currency code.
Regards

Similar Messages

How to insert the checkbox as a separate column in alv grid display

Hi
How to insert the checkboxes as a separate column in alv grid display with using the reuse_alv_fieldcatlog_mege.
example
matnr    maktx ersda                 checkbox
10        books 28/03/2009          checkbox
Thanks
chinnu

Hi,
    Check the following code.
TYPE-POOLS: slis.
TYPES:
      BEGIN OF ty_output,
      chk TYPE c,
      number TYPE i,
      name(20) TYPE c,
      END OF ty_output.
DATA: gt_output TYPE STANDARD TABLE OF ty_output,
      gs_output TYPE ty_output.
DATA: wa_layout           TYPE slis_layout_alv.
DATA: it_fieldcatalog TYPE slis_t_fieldcat_alv,
After you populate the data, build the field catlog like shown below.
wa_fieldcatalog TYPE slis_fieldcat_alv.
wa_fieldcatalog-fieldname = 'CHK'.
wa_fieldcatalog-outputlen = '3'.
wa_fieldcatalog-col_pos = '1'.
wa_fieldcatalog-seltext_m   = 'CHK'.
wa_fieldcatalog-checkbox = 'X'.
wa_fieldcatalog-edit = 'X'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
wa_fieldcatalog-fieldname = 'NUMBER'.
wa_fieldcatalog-outputlen = '10'.
wa_fieldcatalog-col_pos = '2'.
wa_fieldcatalog-seltext_m   = 'NUMBER'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
wa_fieldcatalog-fieldname = 'NAME'.
wa_fieldcatalog-outputlen = '10'.
wa_fieldcatalog-col_pos = '3'.
wa_fieldcatalog-seltext_m   = 'NAME'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
wa_layout-box_fieldname     = 'CHK' .
wa_layout-box_tabname       = 'GT_OUTPUT' .
Now call the FM
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
*   I_INTERFACE_CHECK                 = ' '
*   I_BYPASSING_BUFFER                = ' '
*   I_BUFFER_ACTIVE                   = ' '
      i_callback_program                = sy-repid
      i_callback_pf_status_set          = 'PF_STATUS'
      i_callback_user_command           = 'USER_COMMAND_GRID'
*   I_CALLBACK_TOP_OF_PAGE            = ' '
*   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
*   I_CALLBACK_HTML_END_OF_LIST       = ' '
*   I_STRUCTURE_NAME                  =
*   I_BACKGROUND_ID                   = ' '
*   I_GRID_TITLE                      =
*   I_GRID_SETTINGS                   =
      is_layout                         = wa_layout
      it_fieldcat                       = it_fieldcatalog
*   IT_EXCLUDING                      =
*   IT_SPECIAL_GROUPS                 =
*   IT_SORT                           =
*   IT_FILTER                         =
*   IS_SEL_HIDE                       =
*   I_DEFAULT                         = 'X'
*   I_SAVE                            = ' '
*   IS_VARIANT                        =
*   IT_EVENTS                         =
*   IT_EVENT_EXIT                     =
*   IS_PRINT                          =
*   IS_REPREP_ID                      =
*   I_SCREEN_START_COLUMN             = 0
*   I_SCREEN_START_LINE               = 0
*   I_SCREEN_END_COLUMN               = 0
*   I_SCREEN_END_LINE                 = 0
*   IT_ALV_GRAPHICS                   =
*   IT_HYPERLINK                      =
*   IT_ADD_FIELDCAT                   =
*   IT_EXCEPT_QINFO                   =
*   I_HTML_HEIGHT_TOP                 =
*   I_HTML_HEIGHT_END                 =
* IMPORTING
*   E_EXIT_CAUSED_BY_CALLER           =
*   ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = gt_output
* EXCEPTIONS
*   PROGRAM_ERROR                     = 1
*   OTHERS                            = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

How to display 2 lines in the same column header of jTable?

Please could you help me to display 2 character lines in the same column header of a JTable?
And how to make a fusion between to cells?
Thank you very much

In Swing, most components will accept text in the html format
http://java.sun.com/docs/books/tutorial/uiswing/components/html.html
You can then use <br> tags to make your header text multiline

How to display summary details at then end of a alv grid?

Hi.
i have a ALV grid with 4 columns.
also i need to print summary details at the end of the grid..
eg..
Total material cost 15.111
total labor cost        5.4444
total material burden 267.88
toal labor burden    253.66
How do i prinbt these details at then eend of a grid?/

Hi
Populate event END_OF_LIST into IT_EVENTS tab and use in the fun module
see the doc for population of different events to display the totals after grid
REUSE_ALV_EVENTS_GET
Description
This table tells ALV which events are processed by the caller by CALLBACK.
The table of possible events per list type can be initialized using the module REUSE_ALV_EVENTS_GET.
You can display the names of the constants in the type pools SLIS which represent the individual events using the individual test function in the function module
REUSE_ALV_EVENT_NAMES_GET. Only events with a form routine name are processed.
The table structure contains the fields:
     IT_EVENTS-NAME
Name of the Callback event.
Possible Callback events:
     Action
USER_COMMAND USING R_UCOMM LIKE SY-UCOMM RS_SELFIELD TYPE SLIS_SELFIELD
Process actions on the list
As this is a frequently-used Callback event, the form routine can also be passed directly in the interface in the IMPORTING parameter I_CALLBACK_USER_COMMAND.
PF_STATUS_SET USING RT_EXTAB TYPE SLIS_T_EXTAB
If a user list status is to be set, it must be done in the form routine assigned to this event. The ALV function codes, which must not be active, are in the Parameter RT_EXTAB. This table must be passed with the SET PF-STATUS command (with inactive user function codes as well, if necessary).
The STANDARD status of the function group SALV should be used as a template for a user-specific status.
As this is a frequently-used Callback event, its form routine can also be passed directly in the interface in the IMPORTING parameter I_CALLBACK_PF_STATUS_SET.
ITEM_DATA_EXPAND USING RS_SELFIELD TYPE SLIS_SELFIELD RFLG_ALL TYPE C
Only relevant for hierarchical-sequential lists using the layout parameter IS_LAYOUT-EXPAND_FIELDNAME of the structure IS_LAYOUT.
Exit for passing item entries (ITEM table) for a header record which was expanded interactively by the user.
RS_SELFIELD-TABINDEX contains the header table index for which the item entries are to be put in the global item output table (T_OUTTAB_SLAVE). The Callback is only called if ALV has no items for a header which is to be expanded.
RFLG_ALL is passed with 'X' if the user shows all items. The application must ensure that entries are not repeated in the item table. RS_SELFIELD is initial in this case.
CALLER_EXIT USING RS_DATA Is called at the beginning of the function module to make special settings. It is not usually used.
     List processing events
IMPORTANT: The application Callback routine must not manipulate the internal output table and/or its header record. This restriction applies to all Callbacks which are called in the list output and run under the 'List processing events'.
TOP_OF_LIST no USING parameter. Information output at the start of the list
END_OF_LIST no USING parameter. Information output at the end of the list
TOP_OF_PAGE no USING parameter
Equivalent to the list processing TOP-OF-PAGE event
END_OF_PAGE no USING parameter. Not available for hierarchical-sequential lists.
Information output at the end of a page. This is only called for printing.
TOP_OF_COVERPAGE no USING parameter
The selection information and list status are output together (if they exist) on a separate page by default. See also the documentation of the parameters:
IS_PRINT-NO_COVERPAGE
IS_PRINT-NO_PRINT_SELINFOS
IS_PRINT-NO_PRINT_LISTINFOS
IS_LAYOUT-GET_SELINFOS
The user can format the header area of the 'cover page' himself or herself by specifying a Callback routine for this event.
END_OF_COVERPAGE no USING parameter
Analogously to TOP_OF_COVERPAGE the user can add other information to the information output by ALV (selection information, list status) at this event.
FOREIGN_TOP_OF_PAGE no USING parameter
The Top-of-page event is always processed in ALV and is only passed to the caller via the Callback mechanism. This is still the case if the caller, e.g. by a user action, processes a branch list which was not formatted by ALV (e.g. a popup with additional information about the list record selected and displayed by ALV).
In this case, top-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event top-of-page still occurs in ALV. When ALV notices a top-of-page which was not caused by an ALV output, the form routine in FOREIGN_TOP_OF_PAGE is called.
FOREIGN_END_OF_PAGE no USING parameter
The event end-of-page is always processed in ALV and only passed to the caller via callback. This is still the case, e.g. when the caller processes a details list which was not formatted by ALV (e.g. a popup with further information about selected list records which were displayed by ALV).
In this case, end-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event end-of-page still occurs in ALV. When ALV notices an end-of-page that was not caused by an ALV output, the form routine in FOREIGN_END_OF_PAGE is called.
BEFORE_LINE_OUTPUT USING RS_LINEINFO TYPE SLIS_LINEINFO
Output information before each output line. Should only be used in justified cases because it costs a lot of performance.
AFTER_LINE_OUTPUT USING RS_LINEINFO TYPE SLIS_LINEINFO
Output information after each output line. Should only be used in justified cases because it costs a lot of performance.
     Internal use only
LIST_MODIFY USING R_TABNAME TYPE SLIS_TABNAME
R_INDEX LIKE SY-TABIX
R_INDEX_ITEM LIKE SY-TABIX
R_INDEX_SUM LIKE SY-TABIX
     IT_EVENTS-FORM
Name of the form routine which should be called in the calling program at the event.
Field_catalog:
Field catalog with field descriptions
2.7.1.     Description
Field catalog containing descriptions of the list output fields (usually a subset of the internal output table fields). A field catalog is required for every ALV list output.
The field catalog for the output table is built-up in the caller's coding. The build-up can be completely or partially automated by calling the REUSE_ALV_FIELDCATALOG_MERGE module
See also the documentation of the function module REUSE_ALV_FIELDCATALOG_MERGE.
The minimal field catalog is documented under 'default'. The caller can use the other optional parameters to assign output attributes to a field which differ from the default.
A field catalog need not be built-up and passed explicitly only under the following conditions:
     The internal table to be output has the same structure as a Data Dictionary structure which is referred to in the internal table declaration using LIKE or INCLUDE STRUCTURE.
     all fields in this structure are to be output
     the structure name is passed to ALV in the parameter I_STRUCTURE_NAME.
See also the documentation of the IMPORTING paramter I_STRUCTURE_NAME.
Positioning
     row_pos (row position)
value set: 0, 1 - 3
Only relevant if the list output is to be multi-line (two or three lines) by default.
A multi-line list can also be defined by the user interactively if the default list is one-line.
The parameter specifies the relative output line of the column in a multi-line list.
     col_pos (column position)
value set: 0, 1 - 60
only relevant when the default relative column positions differ from the field catalog field sequence. The parameter specifies the relative column position of the field in the list output. The column order can be changed interactively by the user. If this parameter is initial for all field catalog entries, columns appear in the field catalog field sequence.
Identification
     fieldname (field name)
value set: internal output table field name (required parameter)
Name of the internal output table field which is described by this field catalog entry
     tabname (internal output table)
value set: SPACE, internal output table name
This parameter is used in 'manual' field catalog build-up only for hierarchical-sequential lists.
Name of the internal output table which contains the field FIELDCAT-FIELDNAME.
Data Dictionary reference
     ref_fieldname (reference field name)
value set: SPACE, Data Dictionary field name
Name of the Data Dictionary field referred to.
This parameter is only used when the internal output table field described by the current field catalog entry has a reference to the Data Dictionary (not a program field), and the field name in the internal output table is different from the name of the field in the Data Dictionary. If the field names are identical, naming the Data Dictionary structure or table in the FIELDCAT-REF_TABNAME parameter is sufficient.
     ref_tabname (reference table/structure field name)
value set: SPACE, name of a Data Dictionary structure or table
Structure or table name of the referred Data Dictionary field.
This parameter is only used when the internal output table field described by the current field catalog entry has a Data Dictionary reference (not a program field).
Reference to fields with currency/measurement unit
Each internal output table sum or quantity field whose decimal places are to be formatted appropriately for the unit in the list must follow the convention:
     the field is of data type QUAN or CURR (internal type P) (the field must really have this physical data type. Overwriting the physical data type with the parameter FIELDCAT-DATATYPE has no effect)
     There is a field in the internal output table which contains the associated unit.
     There is also an entry in the field catalog for the unit field.
(If the unit is not to appear as a column in the list, and cannot be interactively displayed as a column, e.g. because it is always unambiguous and is therefore explicitly output by the caller in the list header, the field catalog units field entry can take the parameter FIELDCAT-TECH = 'X'.
The association of a value field to a unit affects the output as follows:
     appropriate decimal places display for the unit
     an initialized field with a link to a non-initial unit is output as '0' for the unit (if FIELDCAT-NO_ZERO is initial). When this field is summed, this unit affects whether the units are homogeneous.
     an initialized field with a link to an initial unit is output as SPACE. When this field is summed, the unit SPACE does not affect the homogeneity of the units.
     When non-initial fields with an initial unit are summed, the unit SPACE is considered to be a unit.
Link to currency unit
     cfieldname (currency unit field name)
value set: SPACE, output table field name
Only relevant for amount columns with associated unit.
Name of the internal output table field containing the currency unit associated with the amount field FIELDCAT-FIELDNAME. The field in FIELDCAT-CFIELDNAME must have its own field catalog entry.
     ctabname (internal currency unit field output table)
value set: SPACE, output table field name
only relevant for hierarchical-sequential lists
Name of the internal output table containing the FIELDCAT-CFIELDNAME field.
Link to measurement unit
     qfieldname (measurement unit field name)
value set: SPACE, output table field name
only relevant for quantity columns with unit link.
Name of the internal output table field containing the measurement unit associated with the quantity field FIELDCAT-FIELDNAME.
The field in FIELDCAT-QFIELDNAME must have its own field catalog entry.
     qtabname (internal measurement unit field output table)
value set: SPACE, output table field name
only relevant for hierarchical-sequential lists
Name of the internal output table containing the FIELDCAT-QFIELDNAME field.
Column output options
     outputlen (column width)
value set: 0 (initial), n
For fields with a Data Dictionary link this parameter can be left initial.
For fields without a Data Dictionary link (program field) the parameter must be given the value of the desired field list output length (column width).
initial = column width is the output length of the referred Data Dictionary field (domain).
n = column width is n characters
     key (key column)
value set: SPACE, 'X'           'X' = kex field (key field output in color)
Key fields can not be interactively hidden. Parameter FIELDCAT-NO_OUT must be left initial.
For exceptions see the documentation of the FIELDCAT-KEY_SEL parameter.
     key_sel (hideable key column)
value set: SPACE, 'X'
only relevant when FIELDCAT-KEY = 'X'
Key field which can be hidden interactively.
The key column sequence cannot be changed interactively by the user.
The output is controlled by the FIELDCAT-NO_OUT parameter analogously to non-key fields.
     no_out (field in field list)
value set: SPACE, 'X'          'X' = field is not displayed in the current list.
The user can interactively choose the field for output from the field list.
The user can display the contents of these fields at line level using the 'Detail' function.
See also the 'Detail screen' documentation of the parameter IS_LAYOUT.
     tech (technical field)
value set: SPACE, 'X'          'X' = technical field
Field cannot be output in the list and cannot be displayed interactively.
Field can only be used in the field catalog (not in IT_SORT, ...).
     emphasize (highlight columns in color)
value set: SPACE, 'X' or 'Cxyz' (x:'1'-'9'; y,z: '0'=off '1'=on)
'X' = column is colored with the default column highlight color.
'Cxyz' = column is colored with a coded color:
     C: Color (coding must begin with C)
     x: color number
     y: bold
     z: inverse
     hotspot (column as hotspot)
value set: SPACE, 'X'
'X' = column cells are output as hotspots
     fix_column (fix column)
value set: SPACE, 'X'
Not relevant for block lists (output of several lists consecutively)
'X' = column fixed (does not scroll horizontally)
All columns to be fixed must have this flag, starting from the left. If a column without this flag is output, only the columns to the left of this column are fixed. The user can change the column fixing interactively. See also the documentation of the Layout parameter
IS_LAYOUT-NO_KEYFIX of the IMPORTING paramter IS_LAYOUT.
     do_sum (sum over column)
value set: SPACE, 'X'           'X' = a sum is to be calculated over this internal output table field.
This function can also be called by the user interactively.
     no_sum (sums forbidden)
value set: SPACE, 'X'          'X' = no sum can be calculated over this field, although the data type of the field would allow summing.
     input (column ready for input)
Function not available
Format column contents
     icon
value set: SPACE, 'X'           'X' = column contents to be output as an icon.
The caller must consider the printability of icons.
     symbol
value set: SPACE, 'X'          'X' = column contents are to be output as a symbol.
The internal output table column must be a valid symbol character.
The caller must consider the printability of symbols.
Symbols can usually be printed, but may not always be output correctly, depending on the printer configuration.
     just (justification)
value set: SPACE, 'R', 'L', 'C'
Only relevant for fields of data type CHAR or NUMC
' ' = default justification for this data type
'R' = right-justified output
'L' = left-justified output
'C' = centered output
The justification of the column header always follows the justification of the columns. Independent justification of the column neader is not possible.
     lzero (leading zeros)
value set: SPACE, 'X'
Only relevant for fields of data type NUMC
ALV outputs NUMC fields right-justified without leading zeros by default.
'X' = output with leading zeros
Note: If a NUMC field is output left-justified or centered by FIELDCAT-JUST, leading zeros are output. If the output of leading zeros is suppressed by a Data Dictionary reference ALPHA conversion exit, the output is always left-justified.
     no_sign (no +/- sign)           Only relevant for value fields
value set: SPACE, 'X'     'X' = value output without +/ sign
     no_zero (suppress zeros)           Only relevant for value fields
value set: SPACE, 'X'          'X' = suppress zeros
     edit_mask (field formatting)
value set: SPACE, template
template = see documentation of WRITE formatting option USING EDIT MASK template
The output conversion conv can be made by template = '== conv'.
Texts
The following text parameters should be specified for program fields without a Data Dictionary reference. The texts are taken from the Data Dictionary for fields with a Data Dictionary reference. If this is not desired, the text parameters can also be specified. The Data Dictionary texts are then ignored. If the user changes the column width interactively, the column header text with the appropriate length is always used. The interactive function 'Optimize column width' takes account of both the field contents and the column headers: if all field contents are shorter than the shortest column header, the column width depends on the column header.
The 'long field label' is also used in display variant definition, sort, etc. popups.
     seltext_l (long field label)
     seltext_m (medium field label)
     seltext_s (short field label)
     reptext_ddic (header)
analogous to the Data element maintenance 'Header'
The specified text is not necessarily output in the list, an optimum among all texts is sought.
     ddictxt (specify text)
value set: SPACE, 'L', 'M', 'S'
You can specify with values 'L', 'M', and 'S', the keyword that should always be used as column header. If the column width changes, no attempt is made in this case to find an appropriate header for the new output width.
Parameters for program fields without Data Dictionary reference
see also 'Text' parameters
     datatype (data type)
value set: SPACE, Data Dictionary data type (CHAR, NUMC,...)
Only relevant for fields without Data Dictionary reference
Program field data type
     ddic_outputlen (external output length)
value set: 0 (initial), n
Only relevant for fields without Data Dictionary reference whose output is nevertheless to be modified by a conversion exit.
Prerequisites:
     FIELDCAT-EDIT_MASK = '==conv'
see also the documentation of the parameter FIELDCAT-EDIT_MASK
     FIELDCAT-INTLEN = n
see also the documentation of the parameter FIELDCAT-INTLEN
n = external format field output length
The column width FIELDCAT-OUTPUTLEN need not be the same as the external format output length (FIELDCAT-DDIC_OUTPUTLEN).
     intlen (internal output length)
value set: 0 (initial), n
Only relevant for fields without Data Dictionary reference whose output is nevertheless to be modified by a conversion exit.
Prerequisites:
     FIELDCAT-EDIT_MASK = '==conv'
see also the documentation of the parameter FIELDCAT-EDIT_MASK
     FIELDCAT-DDIC_OUTPUTLEN = n
see also the documentation of the parameter FIELDCAT-DDIC_OUTPUTLEN
n = internal format field output length
     rollname (data element)
value set: SPACE, Data Dictionary data element name
F1 help can be provided for a program field without a Data Dictionary reference, or F1 help which differs from the Data Dictionary help can be provided for a field with a Data Dictionary reference, using this parameter.
When F1 help is called for this field, the documentation of the specified data element is displayed.
If the FIELDCAT-ROLLNAME is initial for fields with a Data Dictionary reference, the documentation of the data element of the referred Data Dictionary field is output.
Others
     sp_group (field group key)
value set: SPACE, CHAR(1)
Field group key.
Keys are assigned to group names in the IT_SPECIAL_GROUPS parameter (see also the documentation of the parameter IT_SPECIAL_GROUPS).
When such an assignment is made in the field catalog and in IT_SPECIAL_GROUPS, the fields are grouped correspondingly in the display variant popup.
     reprep (Report/Report interface selection criterion)
value set: SPACE, 'X'
Prerequisites:
     The system contains the Report/Report interface (function group RSTI, table TRSTI)
     Parameter LAYOUT-REPREP = 'X'
(see also the documentation of the parameter LAYOUT-REPREP of the IMPORTING parameter IS_LAYOUT )
'X' = When the Report/Report interface is called, the value of this field is passed in the selected interface start record as a selection criterion.
2.7.2.     Default
     The following entries are usually sufficient for internal table fields with a reference to a field defined in the Data Dictionary :
     fieldname
     ref_tabname
Notes:
ALV gets the remaining information from the Data Dictionary.
If no relative column position (COL_POS) is specified, the fields are output in the list in the order in which they were added to the field catalog.
REF_FIELDNAME need only be specifid when the name of the internal table field differs from the name of the referred Data Dictionary field.
Information which is explicitly entered in the field catalog is not overwritten by information from the Data Dictionary.
Priority rule:
Entries in the field catalog have priority over differing entries in the Data Dictionary.
     The following entries are usually sufficient for internal table fields without a reference to the Data Dictionary (program fields):
     fieldname
     outputlen
     datatype
     seltext_s
     seltext_m
     seltext_l
Notes:
F1 help can be provided for program fields by assigning a data element to the parameter ROLLNAME.
If the parameters SELTEXT_S, SELTEXT_M, SELTEXT_L, and REPTEXT_DDIC contain appropriate field labels, the program field column headers are also adjusted appropriately when the column width changes.
Reward points for useful Answers
Regards
Anji

Mix AVG and Total for the same column in ALV grid

Hi,
We are using CL_GUI_ALV_GRID=>SET_TABLE_FOR_FIRST_DISPLAY, and I'd like to know if the following situation is possible.
Let's say we have a column which contains a number of hours, and we set it up to subtotal by period, but as an average rather than a total (DO_SUM = "C"). This is not a problem so far.
The problem is that we'd like for the "Grand Total" at the bottom of the ALV grid to total all of the subtotal averages, instead of calculating an average.
Ex:
Period            Hours
2010/01           6.0
2010/02           7.0
2010/03           2.0
                5.0 (This is an average... 6.0 + 7.0 + 2.0 / 3)
2011/01          12.0
2011/02           5.0
2011/03           4.0
                7.0 (This is an average... 12.0 + 5.0 + 4.0 / 3)
            12.0 (We want this to be a total of 5.0 + 7.0)
So we want the "grand total" line to be 12.0 which is the sum, but it currently comes out as an average.
Therefore we're looking to average at the sub total level, but we want a total of the subtotal levels at the grand total level for the same column.
Thanks,
Denis

Refer to the suggestion given by Naimesh here Can we modify a sub-total in ALV making use of function GET_GLOBALS_FROM_SLVC_FULLSCR and the method GET_SUBTOTALS. You can see the parameter ep_collect01 refered in case of subtotals. Can you please check ep_collect00 for grand total in your case.
As said about EP_COLLECT00,here goes a classic example Modify grand total in ALV GRID
BR
Keshav
Edited by: Keshav.T on Sep 21, 2011 9:39 AM

How to display a row after a subtotal field in ALV Grid

Hi All,
My requirement is to print a extra row with values and constant text after printing subtotal values in ALV Grid.
e.g. TOTAL 12.23 ---> Subtotal field
Tax 5.2 ---> extra row after subtotal field.
Please help me....
Thanks in advance.
Regards
Ajay

Hi
You can try using INSERT <WA> OR INSERT INITIAL LINE .
fill the wa with tax value.
INSERT <wa> into table < internal table >
A row will be inserted into internal table with the values.
Try this and let me know.
Thanks
Hariharan

Hi Gurus! how to count number of records in any column of ALV Grid report

Hi Guys!
I want to know how can we count the number of records in any column selected by the user. Like for oe customer there might be 20 sale order that means for 10 customer there will be 200 Sale order. So if i select cutomer number column ti should give 10 out put and whern select sale order it should give 200 as output.
-Anurag Jain

Hi,
Either you can use the hotspot_click event or double_click to show the Pop-up info of the Sales Order count or customer Count depending on the selection.
In the hotspot_click event method you have E_ROW_ID E_COLUMN_ID..using these you can find the Sales Ordert or customer Number.. Loop the internal table and find the Count.
In the double_click event method you have E_ROW E_COLUMN..using these you can find the Sales Ordert or customer Number.. Loop the internal table and find the Count.

How to display the content of a BLOB column in a ADF/BC pages ?

How to display the content of a BLOB column in a ADF/BC pages ?
There is some image in database table blog column. And we want to display image on the screeen.
There is some example about upload and dowload blog columns.
(steve not yet document example page etc...)
But We want to display blog picture in a image component...
is there any basic way to do it ?
Thanks a lot...

Ali,
You could just download the sample app... but... here is the servlet code from the demo (look at it just for technique - you'll obviously have to change it for your needs)...
John
package oracle.fodemo.storefront.servlet;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import javax.servlet.*;
import javax.servlet.http.*;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.ViewObject;
import oracle.jbo.client.Configuration;
import oracle.jbo.domain.BlobDomain;
import oracle.jbo.domain.DBSequence;
import oracle.jbo.domain.Number;
import oracle.jbo.server.ViewObjectImpl;
public class ImageServlet
extends HttpServlet
private static final String CONTENT_TYPE =
    "image/jpg; charset=windows-1252";
public void init(ServletConfig config)
    throws ServletException
    super.init(config);
public void doGet(HttpServletRequest request,
                    HttpServletResponse response)
    throws ServletException, IOException
    response.setContentType(CONTENT_TYPE);
    response.setContentType(CONTENT_TYPE);
    String detailProductId = request.getParameter("detail");
    String thumbnailProductId = request.getParameter("thumbnail");
    boolean thumbnail = true;
    String productId = null;
    OutputStream os = response.getOutputStream();
    String amDef = "oracle.fodemo.storefront.store.service.StoreServiceAM";
    String config = "StoreServiceAMLocal";
    ApplicationModule am =
      Configuration.createRootApplicationModule(amDef, config);
    ViewObjectImpl vo =
      (ViewObjectImpl) am.findViewObject("ProductImages"); // get view object (the same as used in the table)
    if (detailProductId != null)
      productId = detailProductId;
      thumbnail = false;
    else
      productId = thumbnailProductId;
    vo.defineNamedWhereClauseParam("paramThumbnail", null, null);
    vo.defineNamedWhereClauseParam("paramProductId", null, null);
    vo.setWhereClause("DEFAULT_VIEW_FLAG = :paramThumbnail AND PRODUCT_ID = :paramProductId");
    vo.setNamedWhereClauseParam("paramThumbnail", (thumbnail? "Y": "N"));
    vo.setNamedWhereClauseParam("paramProductId", productId);
    vo.executeQuery();
    Row product = vo.first();
    BlobDomain image = (BlobDomain) product.getAttribute("Image");
    InputStream is = image.getInputStream();
    // copy blob to output
    byte[] buffer = new byte[10 * 1024];
    int nread;
    while ((nread = is.read(buffer)) != -1)
      os.write(buffer, 0, nread);
    os.close();
    vo.setWhereClause(null);
    vo.removeNamedWhereClauseParam("paramProductId");
    vo.removeNamedWhereClauseParam("paramThumbnail");
    Configuration.releaseRootApplicationModule(am, false);
}

How to display the header data on different position in alv report

hi all,
how to display the header data on different position in alv report.
for example ,
customer                                                   name
xxxx                                                         xxxx
                 vendor        name     street
                  xxxx         xxxx      xxxxx
pls   help me .

hi
as per my understanding you need to trnasfer header internal table data to pdf..
please check the following links for internal table to pdf..
Convertion of Internal table data to PDF
This link is related to ur issue
Re: how to insert the calling of the FM: OTF to PDF
Thanks

How to Display Sub-Columns using ALV Grid

Hi ,
Could someone tell me how to display sub-columns under a parent column using ALV Grid. Do we have any standard Program which has this scenario. Please let me know.
Thanks,
Abaper.
Message was edited by:
        ABAP'er

you can check all with <b>BCALV* or RSDEMO*</b> in SE38 for all Std
check below
BCALV_DND_01                   Drag ALV Row to Tree Folder
BCALV_DND_02                   Drag Icons from Tree to Rows of the Grid
BCALV_GRID_DND_TREE            ALV Grid: Drag and Drop with ALV Tree
BCALV_GRID_DND_TREE_SIMPLE     ALV GRID: Drag and drop with ALV tree (simple)
BCALV_TEST_COLUMN_TREE         Program BCALV_TEST_COLUMN_TREE
Rewards if useful............
Minal

Want to display more than 300 charcters in a column using ALV grid display

Hi Guru's,
I am trying to display more than 500 charcters in a column using alv grid display but it in the output it is showing only 128 characters. Can you help me to display all the characters in particular column Or is there any limitation in maximum of no of charcters for a column?
Thanks,
Radha.

Hi Paurl,
Define a work area say
wa_layout type slis_layout_alv.
then fill this work area as
wa_layout-zebra = X
wa_layout-colwidth_optimize = X.
wa_layout-max_linesize = 300.
Then in FM 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
is_layout = wa_layout
etc.
you provided this for the field which is displayed in alv grid will have more than 128 characters.
from this code i want,how it refers to particular field.
when i mentioned field catalog-OUTPUTLEN = '300'.
it is not displayed the field morethan 128 characters.
it only displays 128 characters.
please provide me clear and breif information with suitable code.
i am trying what your sending but it is not displayed more than 128 characters.
if you don't mind please spend for me some time for this and
give me clear and breif information with suitable code.
Thanks & Regards,
Radhakrishna.

How to hide selection column from alv grid

hi
i want to hide selection columns form alv grid.. how can i do it.. Is there any fm for that?
regards
palak

Hi,
the ALV Grid Control allows you to directly hide key columns with NO_OUT (field KEY_SEL is not used).
Field name:NO_OUT
Comp. type:LVC_NOOUT
Dtype(length):Char(1)
SPACE, 'X'
If you set this field, you hide the relevant column in the list. Nevertheless, the column is available in the field selection and can be interactively selected by the user as a display field. The ALV displays the contents of hidden fields on the detail screen for a row in the grid control.
Regards,
Neenu.
Edited by: Neenu Jose on Oct 21, 2008 10:46 AM

Display value and description of one field in alv grid

Hi Folks,
   I want to display value and description of one field as one column in alv grid.
for example iam having Xfield = 01,02,03.
and 01 iam having text value as xxx,
01 xxx
02 yyy
03 zzz
Im report display the values are displaying as 01,02,03..
but i want to display it as 01 xxx,02 yyy, 03 zzz.
Please do needful.
Thx.

Hi, swetha
You can do this with "concatenate".
example:
In you code check where you final internal table is getting filled up before that do this concatenate and then append it.
data t_text type string.
t_text = textfield
CONCATENATE 'Xfield'
                 t_text
                  INTO wa_workarea SEPARATED BY space.
cheers,
Bhavana

Maximum number of character we can print in a column uing ALV grid display

Hi frnds,
My requirment is to print 500 charcter data in a column using ALV grid display.
Could any body tell me is it possible and the maximum character it can i print in a column using ALV grid dispaly.
Regards,
Sandipan

Hi Sandipan,
refer notes 857823, 910300 and 959775. All these say there is a limitation of 128 characters.
857823 - ALV grid: Strings with a maximum of 128 characters
Symptom
Entries in cells of the type CHAR or string are truncated after 128
characters in the SAP GUI.
also refer,
ALV Grid Control (cl_gui_alv_grid), function module (Full-screen) Grid
(Reuse_alv_grid_display, SAPLSLVC_FULLSCREEN), SAPGUI, back end, front end
Cause and Prerequisites
The data table that is sent to the front end only allows character values
with the length 128.
Solution
This is the standard system behavior and cannot be changed.

How to give colors to the top-of-page in ALV Grid

How to give colors to the top-of-page in ALV Grid
in table GT_LIST_TOP_OF_PAGE i am filling 3 rows ,i need 3 different colors to be displyed on top-of-page(one color to one row)
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
I_LOGO = 'ENJOYSAP_LOGO'
IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
please help mee

HI Kranthi,
Check out teh foll. link,
http://www.sapfans.com/forums/viewtopic.php?t=52107
Hope this helps.

How to display Various currency categories in same column in ALV grid?

Similar Messages

Maybe you are looking for