How to do Credential and Policy migration in 10g?

Hi, I installed BPEL manager 10g on my machine and want to run the embed demos/tutorials. I noticed the demos are using JAZN as identity service but my installation on Weblogic Server does not support it. As a result I couldn't use JDeveloper BPEL UI designer (to add a participant type) since I couldn't find JAZN.com realm and underlying users.
I found an article regarding how to migrate Credential and Policy to weblogic server:
http://www.oracle.com/technology/products/jdev/tips/muench/credmig111100/index.html
Simplified ADF 11g Application Credential and Policy Migration to Standalone WebLogic Servers
But it is totally different between 11g and 10g.
How can I do similar job in 10g?

The way I did it is,
Created an Execution Mode work repository for the QA purpose and thus only Scenarios & Load Plans were deployed on this QA repo. This had its own Master Repo as well.
For dev the Dev mode work repo is created where all the interfaces, packages, procedures can be developed or modified as and when required.
Thus, the testers have access only to the QA environment.
Otherwise you can assign roles to the users after the installation in the security tab. Give the operator, connect role to the testers.

Similar Messages

Application Credential and Policy Migration

Hi,
I'm trying to accomplish this: http://www.oracle.com/technology/products/jdev/tips/muench/credmig111100/index.html
What is APPWORKSPACEDIR? The document does not provide any info how it's defined. Is this the folder under AdminServer/tmp/_WL_user/?
If so, there is no src folder under application folder...
In general, I find ADF/WLS documentation very very VERY incomplete :-(

Well in this case I'm think that APPWORKSPACEDIR refers to your existing JDeveloper application directory. You may want to ask the JDev forum:
JDeveloper and ADF
In general, I think the teams are very open to constructive feedback on what specifically needs to be improved with the documentation.
[email protected] is the WLS feedback. For JDev, I would contact some of the bloggers like Shay:
http://blogs.oracle.com/shay/
Good luck.

How to configure listener and tnsnames.ora on 10g version

how to configure listener and tnsnames.ora on 10g version

If you are on linux platform, on command prompt execute netmgr and configure listener fromt there. Or go to $oracle_home/network/admin/listner.ora write the following
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
For tnsnames.ora write the following
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
)

How to read date and time with Oracle_Loader (10g)

ip pc username date time
1.1.1.1 WS1 test 2000/01/01 01:01:01
I am trying to read the date and time from data formatted as above from a .txt file.
create TABLE test (IP char(20), OCID char(15), ID char(30), date_logon date, time_logon date)
ORGANIZATION EXTERNAL (TYPE ORACLE_loader DEFAULT DIRECTORY phonebook
ACCESS PARAMETERS (FIELDS TERMINATED BY WHITESPACE
(IP char(20),
OCID char(15),
ID char(30),
date_logon char(30) DATE_FORMAT DATE MASK "yyyy/mm/dd",
time_logon char(30) date_FORMAT date MASK "hh24:mi:ss"))
LOCATION ('test.log'));
However, my external table returns a date (2007-05-01) AND the time for the time_logon column (e.g. 2007-05-01 01:01:01) . I just want the time (e.g. 01:01:01).
What am I doing wrong?
*I tried: date_logon char(30) DATE_FORMAT DATE MASK "yyyy/mm/dd hh24:mi:ss", reading both the date and time at the same time, but it doesn't work.
Thanks.

Justin, thank you so much for your help.
When I try:
SELECT a.ip, a.ocid, a.id, TO_CHAR( a.date_logon, 'DD-MON-YYYY HH24:MI:SS' )
FROM test a
date_logon entries are all dd-mon-yyyy and 00:00:00 (i.e. no time was stored).
I don't have control over the text file, so I don't think I can make any changes to the formatting.
I tried to declare the column as 'timestamp':
date_logon char(60) DATE_FORMAT timestamp MASK "yyyy/mm/dd hh24:mi:ss",
but time is still displayed as 00:00:00:000.... which leads me to suspect that the culprit is the space between date and time in the text file.
Say if I have 2007/05/25 and 2007/05/01 16:19:23 in two separate date columns. Is it possible to grab the time from the second column and append it to the first column (while still retaining the DATE property, i.e. 2007/05/25 16:19:23).
Thanks!

Description for Each Database Metric and Policy of OEM 10g

Hi Dba's,
Thanks for having a look into this thread. I am looking for some Oracle online description for the Metrics as well as Policies it has defined in OEM 10g 10.2.0.3.0. Grid.

Metrics
http://download.oracle.com/docs/cd/B16240_01/doc/em.102/b25986/toc.htm
http://download.oracle.com/docs/cd/B16240_01/doc/em.102/b16230/toc.htm
Policy
http://download.oracle.com/docs/cd/B16240_01/doc/em.102/b16231/toc.htm
All
http://download.oracle.com/docs/cd/B16240_01/doc/nav/portal_booklist.htm

Row chaining and row migration ???

hi
Can someone tell me what are the oprions to over come row chaining and row migration in 10g and 11g databases ???
thanx in advance.
s

WIP wrote:
hi
Can someone tell me what are the oprions to over come row chaining and row migration in 10g and 11g databases ???
thanx in advance.
sHi.Chained row is a row that is too large to fit into a single database data block. row migration mean is update some rows would cause it to not fit on the block anymore,then these migrates to new address.For more information see below links
http://blog.tanelpoder.com/2009/11/04/detect-chained-and-migrated-rows-in-oracle/
http://www.akadia.com/services/ora_chained_rows.html

How do I fix an improper migration; and hardware or migration issue?

I have been having screen freezes since I migrated my user account (incorrectly, I now discover) from my G5 to my brand-new, week-old precious ...er 13" Macbook Pro (2.66 processor). Doesn't matter what program I'm in and hardboot is the only way to regain any response (wince) -- the cursor just disappears, no trackpad or keyboard control. (no externals attached, no wireless either once.)
I ran the hardware test from the Applications disk: the short test reports no problems. The extended test froze after 8 minutes but it was on battery; I re-ran the extended test with it plugged in and it froze again on the first pass after 29 minutes. Had to hard-boot it both times; cancel/stop test button would not respond. I figured two freezes was an answer.
First assumption is I have a hardware issue and I need to take it back to the store.
However. When I migrated my user files, I did so without taking advantage of this forum's extensive discussions and with my head in the..er.. clouds about PowerPC to Intel issues. (I've seen several links and tips to the proper way of doing things, now, thanks. And sigh)
But I haven't seen precisely how one is supposed to fix doing it wrong. (Feel free to point me to such a place, my search-fu is not strong today.)
What I did wrong:
A. I just brought everything over using migration assistant; settings, software, everything. PowerPC-only software--heck, I might have even brought my old classic stuff in its folder. My third-party firewall and virus protection program (Intego Netbarrier) was apparently also PowerPC only, but it installed and appeared to be running.
B. I just had to play with my new toy before I migrated, so I did the apparently horrible mistake of creating a FancyNewUser account before migration.
C. When I migrated, I created a new account (UpdatedUser) for my old G5 account, settings, and information. I have not done anything to try to merge those two accounts and don't see the point; sometimes it's useful to have a separate admin account. (The migration itself, btw, was fantastically smooth.) But of course the applications are available to both accounts.
D. Oh, I did not repair permissions on the G5 before I migrated, either. *heavy sigh*
Minor note. I never upgraded the firmware on the G5 (it was having the 'sleep' issue) I just never put it to sleep. And it seems to me the laptop is freezing when I try to wake it from sleep. At any rate, the laptop was not freezing prior to the migration.
So.
1. Is there a way I (a middle-of-the-road user, not really comfy with terminal or command lines although I've used 'em) can determine if this is a hardware or an OS/software conflict issue?
2. Clearly I need to fix the migration. What's the best way to go about it? Should I
a) delete the UpdatedUser account entirely and start over? If so, am I right in thinking that I can:
aa. create a ThirdAccount on my laptop
ab. move the data I want to keep, like my photos and music and word processing files? (I think it was Kerry's tip: out of UpdatedUser's folders>a shared file>ThirdAccount's desktop>ThirdAccount's correct folders)
ac. delete the UpdatedUser account and
ad. perform fresh installs on any software I want on the laptop? (making sure, of course, that it will run on the laptop).
Uh... this skips the step of uninstalling the programs I shouldn't have migrated. I assume I can't run an uninstaller that might have come with these programs, since that, too, would have been compiled for the PowerPC. So what's the best way of getting rid of them?
(It occurs to me I could move the data to the FancyNewUser account without creating a third, but I actually like the idea of having a completely clean new account).
b) Turn the laptop over to the store, ask them to wipe it and reinstall everything so I can start from scratch?
c) some other option?
New machine
Intel Core 2 Duo
4GB Memory
320GB hard drive
NVIDIA graphics
I'm aware I'm asking a boatload of questions here. Thank you for any help you can offer.

Let's say you just start over and do an Erase & Install and then migrate using this guide:
http://discussions.apple.com/thread.jspa?threadID=435350
This way you're not dragging over a lot of PPC junk.
I would reinstall all third party apps from their disks.

I recently purchased a new Macbook Air and used migration to transfer old files from my old PC to the Mac, and now there are songs that I purchased through Itunes on my phone that are not on my Mac, how do I transfer these songs from the phone to the Mac?

I recently purchased a new Macbook Air and used migration to transfer old files from my old PC to the Mac, and now there are songs that I purchased through Itunes on my phone that are not on my Mac, how do I transfer these songs from the phone to the Mac?

dnunn wrote:
... how do I transfer these songs from the phone to the Mac?
Transfer Purchases > http://support.apple.com/kb/HT1848
Download Past Purchases > http://support.apple.com/kb/HT2519

How can we do the data migration between Oracle Applications and SAP R/3.

Hi All,
How can we do the data migration between Oracle Applications and SAP R/3 system.What are all the possible ways to move bulk data from Oracle Apps to SAP r/3 system.
Provide any 3rd party tools which supports data migration and also pls rpovide the SAP's own data migration tools with supports the above feature.
Awaiting for best possible solution.
Thanks in advance.
Regards
Dharmaraju

the 3rd party tool is ETL , you can use ETL tool and the prepare the load files then you can use LSMW method to upload the data to SAP.

I just installed last versión of iphoto and it erased my iPhoto events. Now i dont have iphoto library anymore and i only have my events in iPhone and in MobileMe gallery. How can i download and migrate events in MobileMe gallery to events in iPhoto ?

I just installed last versión of iphoto and it erased my iPhoto events. Now i dont have iphoto library anymore and i only have my events in iPhone and in MobileMe gallery. How can i download and migrate events in MobileMe gallery to events in iPhoto ?

O also installed lion before and as i had filevault activated y lost my user information in timemachine. So, i have a useless backup. I only have events in iPhone ( due i didnt sync photos) and in MobileMe gallery, and i already migrate to iCloud. So?

How to grant user permission to create "Credential" and "Proxies"

Hi Team,
Kindly let me know how to grant permission for user to create "Credential" and "Proxies" on server:
Thanks in advance
Santosh

Can I revoke this permissions once I grant?
You can use DROP and REVOKE commands to do the opposite.
USE [msdb]
GO
ALTER ROLE [SQLAgentOperatorRole] DROP MEMBER [TestLogin1]
GO
USE [msdb]
GO
ALTER ROLE [SQLAgentReaderRole] DROP MEMBER [TestLogin1]
GO
USE [msdb]
GO
ALTER ROLE [SQLAgentUserRole] DROP MEMBER [TestLogin1]
GO
use [master]
GO
REVOKE ALTER ANY CREDENTIAL TO [TestLogin1] AS [sa]
GO
Cheers,
Vaibhav Chaudhari
[MCTS],
[MCP]

How to remove ALL metric and policy alerts in EM Grid Control

Hi,
does anyone know how to clear all metric AND policy alerts in EM GC?

See this thread..
Clear the Alert list

How do I integrate data and apps migrated from my old MacBook to my newish MacBook Pro?

Data and applications were migrated successfully from my old MacBook to my newish (three years old) MacBook Pro. However, I can get to the data and apps from only one computer at a time. How do I integrate documents from the old machine to the new? How do I include apps I used before such as Office in the configuration of the new computer?
I also do not know how to switch back and forth from one device to the other (I have to choose when I boot up), which makes this situation all the more inconvenient.

I don't know how Firefox installs, but if you just dragged it into the Applications folder, you can drag it to the Trash and empty it.
If it had an installer, then you need to use the uninstaller provided by the developer.
What are the other "files that may not be removed?" It doesn't sound like much of a good idea.

Why and how does Adobe Store's policy deliberately impede Least Developed Countries from developing?

Hi there,
My name is Dr Eric Mousset. I currently reside in Cambodia, having the privilege to serve as (international) Technical Assistant to support a Government project that is co-funded by the Royal Government of Cambodia and the World Bank, and purposed to Higher Education Capacity and Quality Improvement.
My mission implies conducting a survey on skills demand by employers and skills supply by Higher Education Institutions, in order to better inform further policy development.
Among the expected policy outcomes: a more effective alignment between skills supply and job market needs.
Among the desired policy impacts: providing the Cambodian economy with the HR skills that are required for its growth and diversification.
I am impressed by the combined capabilities of Adobe Acrobat XI Pro and Adobe Forms Central. And until this morning it was on top of my shortlist of surveying tools.
Unfortunatley, while attempting to upgrade to FormsCentral's "Plus" plan, I have received the following reply from Adobe:
Unsupported Country
Thus here is my question:
Why and how does Adobe Store's policy deliberately impede Least Developed Countries from developing?
Yours sincerely,
Dr Eric Mousset

Hi;
I can't speak to the business decisions that lead to which countries we enable purchasing subscriptions in the store, but I can guarantee you that it is not to impede anyones development.
A credit card with an address in any of the supported countries can be used for purchasing the subscription, this has enabled many to get around the issue, but that is the only way to subscribe.
Thanks,
Josh

How to search for password policy

Hello,
Using DS 5.2:
I've created a test policy, dn: cn=Test Policy,ou=People, o=xxx, o=isp. I can apply the policy, I can see the policy in my backup ldifs, but I can't figure out how to search for and display it (and eventually, delete it) either from the command line using ldapsearch or form within the admin gui. Any help?

What I would like to do is query my 8i instance for the current password policy
Can anyone provide a query to retrieve this info?connect as sys
in Oracle 8i and issue the command;
select object_name,object_type from all_objects where object_name like '%PASS%';
and
select object_name,object_type from all_objects where object_name like '%POLICY%';
I think , i'm not sure these policies would be transfered to 10g through migration except -if any- some of them are obsolete to 10g!!!!!
Regards,
Simon

How to do Credential and Policy migration in 10g?

Similar Messages

Maybe you are looking for