How to do message correlation without using BPEL?
Can message correlation be accomplished in a JCD? I know how to do this in BPEL.
Regards.
Not unless you write your own correlation processor (which eInsight gives you as part of the deal).
Think about what it is you need to accomplish and work out what Java code would be necessary to accomplish it.
Do share. I, for one, am curious :-)
Similar Messages
-
Note:304522.1 How to Move Queue Tables without using export import
Trying to use the pkg available in Metalink "Note:304522.1 How to Move Queue Tables without using export import"
Using the 10.1.0.x and upwards Package, I'm getting the following error on a single consumer queue table with an xmltype payload:
SQL> exec move_aqt.move('XFORM_TEST_INT','INTERFACE_XML_QUEUE','SMALLBLOCK');
BEGIN move_aqt.move('XFORM_TEST_INT','INTERFACE_XML_QUEUE','SMALLBLOCK'); END;
ERROR at line 1:
ORA-20000: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SYS.MOVE_AQT", line 652
ORA-06512: at line 1
We've tried in multiple environments, always with the same results.
Trace file shows:
*** 2006-11-08 10:06:47.154
*** SERVICE NAME:(SYS$USERS) 2006-11-08 10:06:47.147
*** SESSION ID:(379.954) 2006-11-08 10:06:47.147
qtable move procedure starting execution at 08-11-2006 10:06:47 for queue table XFORM_TEST_INT.INTERFACE_XML_QUEUE
qtable move procedure experienced an exception at 08-11-2006 10:06:47
qtable move error message ORA-06502: PL/SQL: numeric or value error
qtable move procedure ended execution at 08-11-2006 10:06:47
Can anyone help with this? Has anyone used this before successfully (or not successfully). We urgently need this working today to test moving our queue table into a tablespace with a smaller block size for performance reasons in production.
Thanks for the help!
TonyThank you,
Yes we've done that. They've confirmed a problem with the links/scripts on the note. The 10.1 and up version was not really 10.1 and up.
As they would not have a new version available in time for the move we needed to perform, we switched our approach to using dbms_redefinition instead.
Thanks for the reply,
Tony -
How do i install opensolaris without using the virtual box??
hi.
i am new to solaris
i am currently using a windows XP OS
i got down the opensolaris cd from SUN
how do i install opensolaris without using a virtual box ?The OpenSolaris CD is a "Live CD". You can boot off of the CD, and either run the OpenSolaris operating system directly, or you can select the "Install" icon on the LiveCD desktop. You can find full instructions here: http://dlc.sun.com/osol/docs/content/IPS/getst1.html
Do you want to keep your Windows OS on the disk? If so, then you want to follow the instructions for partitioning your disk (unless you already have a spare partition).
-- Alan -
How to connect to AD without using ADWS?
How to connect to AD without using ADWS? Is it possible to do it? If yes, can teach me how to connect to AD and find their attributed?
Hi Noobycy,
There are few tools to find AD attributes without ADWS. See options you have below
1.ADFIND -
http://www.joeware.net/freetools/tools/adfind/ This is a command Line tool
2.
The ADSIEDIT tool
from the Windows Support Tools is a great tool to "explore" the AD.
http://technet.microsoft.com/en-us/library/cc731547.aspx
3. ADUC -
http://www.boostsolutions.com/blog/how-to-find-attributes-of-objects-in-active-directory/
Regards, MassonTech -
Hello! I'm out of the country and all my iWeb information is on my computer at home. Now I need to make changes on the webpage... how can i do that without using the computer i made the page on? Thank you!!
iWeb uses the domain.sites2 files to store its assets.
You'll find it here :
~/Library/Application Support/iWeb/
where ~ is your Home directory.
If you take a computer with you, you have to store that file in the same location.
It's not different from taking documents with you if you want to edit them.
A solution is to remotely control your computer at home.
TeamViewer, LogMeIn, Apple Remote Desktop or any VNC application you can use, like "Chicken of the VNC". -
How we generate Surrogate Keys without using identify column
Hi All,
How we generate Surrogate Keys without using identify column.
Regards,
ManishThere are various options
1.IDENTITY columns - simplest to implement
2. Using NEWID(), NEWSEQUENTIALID() functions (if you want to use GUID values as surrogate keys)
3. SEQUENCE object (if SQL 2012 and above)
4. Using custom functions to generate keys yourself
This is an good article which compares use of GUIDs against integers as surrogate keys
http://blog.jonathanoliver.com/integers-vs-guids-and-natural-vs-surrogate-keys/
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
HT4993 how to unlock my passcode without using itunes
how to unlock my passcode without using itunes
cannot be done without itunes
http://support.apple.com/kb/ht1212 -
How to connect from java without using oracle client installation
hi ,
Please tell me how to connect from java without using oracle client
Thanks & Regarshttp://www.orafaq.com/wiki/JDBC#Thin_driver
-
I bought my mom an iPad for Christmas this year. We can't use it as it will not recognize her passwords. How do I reset it without using passwords. I want this thing wiped clean, just like it came from the store so that I might start over. This is very frustrating!
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Cheers, Tom -
Creating webservice for pl/sql API without using BPEL
Hi All,
Using BPEL, We have created partner links using DB Adapter for accessing our pl/sql API's.
Is there any way to create a web service for a pl/sql API having complex datatype parameters like (Record, table of records etc) using DB Adapter or any other tool without using BPEL?
Thanks,
Uma.We introduced the use of JPublisher to automate the generation of wrappers for PL/SQL procedures that use types such as boolean, record and table. The wizard will invoke JPub and generate artifacts that the partnerlink will use to invoke the wrapper instead of the original API. Boolean is replaced by INT, record is replaced by an object type and table is replaced by a nested table. The wrapper will invoke the original API. JPub also takes care of converting between the different types (i.e. record <-> object).
-
Hey guys i please i need a help on my ipad. i have received an ipad from anonymous person but she has already logged in to iclouds, since i dont know her password how do i sign out without using her password on ios 8?
You can't. Your mysterious benefactor must remove the device from her (I guess you know it's a her?) iCloud account by logging into icloud.com, going to Find my iPhone and removing from there.
Matt -
How to run java servlet without using Web.xml?
How to run servlet without using Web.xml? From a book, I know that web.xml descriptor is optional, but the book doesn't tell us how to run java servelet without web.xm descriptor. So how to do that? Thanks a lot.
How to run servlet without using Web.xml?But Tomcat now uses a web.xml for its global server-wide configuration.
If you'd like to invoke a servlet with:
http://host/servlet/ServletName
you have to enable the invoker servlet.
[from an HTML]
<FORM METHOD="POST" ACTION="/servlet/HGrepSearchSJ">
[from resin.conf of Resin Web Server 2.1.12]
<!--
- The "invoker" servlet invokes servlet classes from the URL.
- /examples/basic/servlet/HelloServlet will start the HelloServlet
- class. In general, the invoker should only be used
- for development, not on a deployment server, because it might
- leave open security holes.
-->
<servlet-mapping url-pattern='/servlet/*' servlet-name='invoker'/>
[from TOMCAT5.0.19/conf/web.xml, a global server-wide web.xml file]
<!-- The "invoker" servlet, which executes anonymous servlet classes -->
<!-- that have not been defined in a web.xml file. Traditionally, this -->
<!-- servlet is mapped to URL pattern "/servlet/*", but you can map it -->
<!-- to other patterns as well. The extra path info portion of such a -->
<!-- request must be the fully qualified class name of a Java class that -->
<!-- implements Servlet (or extends HttpServlet), or the servlet name -->
<!-- of an existing servlet definition. This servlet supports the -->
<!-- following initialization parameters (default values are in square -->
<!-- brackets): -->
<!-- -->
<!-- debug Debugging detail level for messages logged -->
<!-- by this servlet. [0] -->
<servlet>
<servlet-name>invoker</servlet-name>
<servlet-class>
org.apache.catalina.servlets.InvokerServlet
</servlet-class>
<init-param>
<param-name>debug</param-name>
<param-value>0</param-value>
</init-param>
<load-on-startup>2</load-on-startup>
</servlet>
---comment out below----------------------------------------------------------
<!-- The mapping for the invoker servlet -->
<!--
<servlet-mapping>
<servlet-name>invoker</servlet-name>
<url-pattern>/servlet/*</url-pattern>
</servlet-mapping>
--> -
How to reference a class without using the new keyword
I need to access some information from a class using the getter, but I don't want to use the new keyword because it will erase the information in the class. How can I reference the class without using the new keyword.
ContactInfo c = new ContactInfo(); // problem is here because it erases the info in the class
c.getFirstName();quedogf94 wrote:
I need to access some information from a class using the getter, but I don't want to use the new keyword because it will erase the information in the class. How can I reference the class without using the new keyword.
ContactInfo c = new ContactInfo(); // problem is here because it erases the info in the class
c.getFirstName();No.
Using new does not erase anything. There's nothing to erase. It's brand new. It creates a new instance, and whatever that constructor puts in there, is there. If you then change the contents of that instance, and you want to see them, you have to have maintained a reference to it somewhere, and access that instance's state through that reference.
As already stated, you seem to be confused between class and instance, at the very least.
Run this. Study the output carefully. Make sure you understand why you see what you do. Then, if you're still confused, try to rephrase your question in a way that makes some sense based on what you've observed.
(And not that accessing a class (static) member through a reference, like foo1.getNumFoos() is syntactically legal, but is bad form, since it looks like you're accessing an instance (non-static) member. I do it here just for demonstration purposes.)
public class Foo {
private static int numFoos; // class variable
private int x; // instance varaible
public Foo(int x) {
this.x = x;
numFoos++;
// class method
public static int getNumFoos() {
return numFoos;
// instance method
public int getX() {
return x;
public static void main (String[] args) {
System.out.println ("Foo.numFoos is " + Foo.getNumFoos ());
System.out.println ();
Foo foo1 = new Foo(42);
System.out.println ("Foo.numFoos is " + Foo.getNumFoos ());
System.out.println ("foo1.numFoos is " + foo1.getNumFoos ());
System.out.println ("foo1.x is " + foo1.getX ());
System.out.println ();
Foo foo2 = new Foo(666);
System.out.println ("Foo.numFoos is " + Foo.getNumFoos ());
System.out.println ("foo1.numFoos is " + foo1.getNumFoos ());
System.out.println ("foo1.x is " + foo1.getX ());
System.out.println ("foo2.numFoos is " + foo2.getNumFoos ());
System.out.println ("foo2.x is " + foo2.getX ());
System.out.println ();
} -
hello i have a few problems and i hope somebody has a solution my first problem is that how can i install windows vista without using a disk drive and my second problem is that should i tick mark the option which says Install windows 7 while using boot camp please reply, Thanks,
When running Windows in a virtual environment Windows and OSx share your computer's resources such as RAM. Therefore your games can not use all your computer's resources when running.
If you install Windows natively then Windows and your games can and do use all your computer's resource such as RAM.
But as already said, older operating systems are not supported and will not run natively using Boot Camp Assistant. You must use Windows 7 if installing natively in Lion or Moubtain Lion. -
Message Spiltting Without Using BPM in XI-7.0
We are using XI-7.0.
We need to spilt the message from 1 to many without using BPM based on following conditions.
We need to spilt the one message in many messages depending on the segment records of ZORDER3 and ZORDER2.
If IDOC message do not have segment ZORDER3 then message needs to be spilt based on the segment records of ZORDER2.
In the following example, one IDOC message would come from SAP system and that message needs to spilt into 7 messages for the vendor's system.
Any help will be appreciated.
<u>Source message: IDOC-ZORDER</u>
<i>Segment:ZORDER1(Max occ-1)
PO:4600000010
LineItem:00010
Plant:5000
Segment:ZORDER2(Max occ-999)
ServiceCode-100000
Segment:ZORDER3(Max occ-99)
CostCenter:CC123456789
CostDesc:CCTest1
CocstCenter:CC23456795
CostDesc:CCTest2
WBSElement:WBS45698712
CostDesc:WBSTest1
WOrderNo:WO56987412
CostDesc:WOTest1
ServiceCode-200000
Segment:ZORDER3(Max occ-99)
CocstCenter:CC78956795
CostDesc:CCTest7
WBSElement:WBS492871
CostDesc:WBSTest5
WOrderNo:WO98757412
CostDesc:WOTest6
<u>Target Message Structure</u>
POData(1:1)
Level1(1:1)
PO&LineItemNo:460000001000010
Plant:5000
ServiceCode-100000
Level2(1:1)
costobjectID:CC123456789
costobjectDesc:CCTest1</i>Thanks in advance!
MPMrudula,
If you give the target structure and occurrences of it , then it will be more helpful. Also please quote on wht basis the message needs to be splitted, coz the condition is not clear, Please give the condition too.
Best regards,
raj.
Maybe you are looking for
-
Problems after upgrading to iOS 6.0 - HELP !! (iphone 4S)
I just bought iPhone 4S 64Gb one week ago.Yesterday morning I upgraded to iOS6.0 and encounter the following errors: 1. I can not turn on/off Wi-Fi. Button greyed out. 2. Auto-Brightness function does not work. 3. When running high graphics game like
-
Does the new Ipod Touch 5 have an FM tuner?
I read on a few websites that the new Ipod Touch 5th generation has a built-in FM tuner. Is this true?
-
Hi All, Can someone guide me how the Debit and the creift indicator is determined for the system to post the accouting entry for a sales transaction. Through account determination the GL account is determined for an account key. For example if GL a
-
Condition Indicator Inconsistent Error Message --- But All Book Files Have Same Settings!
Help! I have used the same FrameMaker files for over 2 years in a book and all files have conditional text (CT) tags applied. I added a new one today and now every time I update the book, a Book Error Report says that a condition indicator for one of
-
Is the iPod classic safe for running? will it ruin the iPod? thanks