How to do numeric integration

I am trying to do inegration of an exponential function between two limits but I am getting wrong results
Can anybody help me
thanking you
augustin
Certified LabVIEW Associate Developer

If you are trying to integrate an array of data, you should use the numeric integration.vi (in Mathematics> Integ & Diff);or the Uneven numeric integration.vi...
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

Similar Messages

Numeric Integration of positive and negative values in the same signal

Hello.. I need to perform an evaluation of Area Under Curve of my signal, but it contains positive and negative values. I am using the "Numeric Integration" function, but the result expressed by my VI represent: AREA OF POSITIVE VALUES - AREA OF NEGATIVE VALUES, in other words, my result represent the difference between these two areas. But I want to know the total area, the sum of positive values area and negative values area, and because both values has are "+", my final result should has "+" notation.
For example:
Area of positive values: +45.00
Area of negative values: +34.00
Total area: +79.00
How do I modify my VI to obtain the total area value?
I try to split my values in two parts:
A) only the positive and zero values
B) only the negative values
I calculated the areas of both splits and performed an sum of them, but the final result does not matches with total area (computed by another software to know the real value)
I attached an picture of my VI
Thank you
Daniel
Attachments:
Numeric Integration1.png ‏12 KB

Use an event structure for the boolean value changed. You also did not follow Lynn's advice to insert an "absolute value". It would really simplify everything.
Here's how it would look in a newer version of LabVIEW (your icons look different because you have an older version. The functions are the similar).
This is just a draft and the program needs to be improved. Use a state machine with events for read file and another for value change on the sampling rate. Place the data array in a shift so you can change the sampling rate without the need to re-read the file. Modify as needed.
Some important pointers in general:
There is NO need to constantly spin the loop every nanosecond. The only time the loop needs to spin if if one of the inputs has changed.
If you don't use an event structure, all UI loops need a wait to conserve CPU.
Never (almost never) use "switch until released". Typically you want to use "latch when released" which makes the terminal true exactly once until the value is read and it will revert to false after that. "switch until released acts like a doorbell, so if it werent for the file dialog, you would execute the case several times in a row.
You don't need to get the array size and wire N of the FOR loop if you are autoindexing. LabVIEW will spin the loop until it runs out of elements automatically.
There is an atomic operation for "negate" in the numeric palette. No need to multiply with a "-1" diagram constant.
There is an atomic operation for ">=0" in the comparison palette. No need to compare with a "0" diagram constant.
Use a stop button on the loop termination.
Everything that only needs to be done once after the file is read (e.g. you inner loop, etc. also belongs inside the case structure. Right?
In general, you would make things much easier for us if you would attach your actual live VI instead of dead images.
Message Edited by altenbach on 04-19-2008 12:22 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
areaPositive.png ‏9 KB

Signal numeric integration

hello
i was having problem getting the area under the curve.to eliminate the
noise, i set threshold level by using basic level trigger. then extract
portion of the signal.
from the initial threshold level, i will get the t1 and t2
corresponding to the threshold value. but it does not represent exactly
the area. i still left out the hatched area. so i need to define t3.
(pls refer to diagram attached)
how to define t3?how to get the exact area curve. previously i used numeric integration(used simpson rule)
thanks
here attached with the diagram and offline data
Attachments:
graph(dt).png ‏4 KB
1_06-12-14_1324.zip ‏50 KB

Integrating a noisy signal gets rid of a lot of noise automatically. Why don't you do a numeric integration of the signal, then pick the start and end point for the area? If the baseline is zero on the average, you can easily pick locations that are clearly outside and the area will still be correct.
LabVIEW Champion . Do more with less code and in less time .

How to use the integrated camera in Lenovo THINKPAD X301

Dear All,
I would like to know how to use the integrated camera for the THINKPAD X301 LAPTOP?
Please help

Hi ,
For Lenovo product , we need application software to activate this camera. You can use the Picasa software which can search from Google to activate this camera.
After install Picasa > Picasa > Import > Select Device ( then choose your camera )

How to Launch an Integration Builder under two different java versions

How to Launch an Integration Builder under two different java versions     1
1. Situation     2
2. How To Do     2
2.1 jre preparation     2
2.2 Put them into the system     2
2.3 Execute a Java Web Start under jre 1.4.x version     3
2.4 Change Java Runtime Versions     3
2.5 Launch an Integration Builder     6
1. Situation
OS: windows 2000 pro English
Java version: jdk 1.5.x was already installed. (Its not permitted to change.)
I dont have any authorization to install any software on the PC.
But I need to use an Integration Builder.
I already knew URLs of an Integration Builder (http://<hostname>:50000/rep/start/repository.jnlp).
2. How To Do
At this moment, an Integration Builder (XI 3.0) can be launch under jre 1.4.x environment (on windows).
2.1 jre preparation
I download j2re-1_4_2_10-windows-i586-p.exe from http://java.sun.com/j2se/1.4.2/download.html
I installed it on my home PC and copied all files from C:\Program Files\Java\ j2re1.4.2_10\ into my USB.
2.2 Put them into the system
I pasted j2re1.4.2_10 folder from my USB into the windows 2000 pro system.
Finally, I could list up all of javaws.exe under this system.
c:\j2re1.4.2_10\javaws\javaws.exe
c:\Program Files\Java\jdk1.5.0_05\bin\javaws.exe
c:\Program Files\Java\jdk1.5.0_05\jre\bin\javaws.exe
c:\Program Files\Java\jre1.5.0_05\bin\javaws.exe
2.3 Execute a Java Web Start under jre 1.4.x version
I executed c:\j2re1.4.2_10\javaws\javaws.exe .
2.4 Change Java Runtime Versions
Go to File-> Preferences -> Java
As you can see, it indicates 1.5 version.
Click [FIND] button.
Click [NEXT] button.
Click the j2re1.4.2_10 folder.
Click [NEXT] button.
A JRE Finder is able to find javaw.exe automatically. Or you can indicate C:\j2re1.4.2_10\bin\javaw.exe directly.
Click [NEXT] button.
Finally, there are two Java Runtime Versions. Now you need to uncheck the Enabled column of 1.5 version and check 1.4 version.
Click [OK] button.
Well, in the General tab, I selected None for Proxies.
2.5 Launch an Integration Builder
In the Location field, I typed the URL of an Integration Builder jnlp.
http://<hostname>:50000/rep/start/repository.jnlp
SAP Integration Builder comes up inside Applications area.
Select it and click [Start] button.
If you click Environment-> Integration Builder (Configuration), you can launch Integration Builder: Configuration.
[PDF file location] with screenshots
http://SDN.mobilian.org/SDN/How2LaunchIB.rar
===================Advertisement==========================
How do you search SDN?
What about [<b>SDN Search Widget</b>]?
SDN Search Widget
=========================================================

I am not getting anywhere with deploying my application or
applet.
I have set up my bc4j project. It contains all my VO info,
links, application module. (proj a)
I then have another project with DbInfo in it(has all my rowset
info), Multiple Frames, and my Applet.java file.
Actually I have an Applet.java file and a Application.java file
because I was seeing if both/either worked. Anyway they seem the
same, except for that extra window that comes up when you run the
applet.
I follow the steps in the oracle directions (from earlier post).
And all seems ok. But at ---->
[*] Select the subdirectory under myhtml where your applet's HTML
file
is located, and enter the directory path of the 'staging'
directory you
created in step 3 above, if different from the default.</li>
[*]Select the HTML files that JDeveloper created to run your
applet.</li>
[*]Select all of the Java source files in your project that make
up the
applet.</li>
I have no HTML file associated with my applet, at least that I
know of.
So do I need to create one, or should it of been done
automatically.
Also, I trying to figure out what will be the best way to deploy
my project. Applet or stand alone application is what my first
choices have been so far. I have read that there is some issues
with applets being served from a different server than the
database. So a stand alone application was my front runner, but
I haven't gotten either way to work yet.

How to find out Integrated weblogic server version

hi experts,
am using jdev11.1.1.5.0
i h'd big doubt ;)
how to find out Integrated weblogic server version
i think am using weblogic10.1.3. but am not sure?
so how can i found out.
this my log. but i dont see any info about version.
*** Using port 7101 ***
"C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\DevSuiteHome_1\jdk\jre\bin\classic;C:\DevSuiteHome_1\jdk\jre\bin;C:\DevSuiteHome_1\jdk\jre\bin\client;C:\DevSuiteHome_1\jlib;C:\DevSuiteHome_1\bin;C:\DevSuiteHome_1\jre\1.4.2\bin\client;C:\DevSuiteHome_1\jre\1.4.2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and   *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console        *
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client   -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Duser.timezone="+05:30" -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\oracle\store\gmds   -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<Feb 17, 2012 5:50:39 AM GMT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Feb 17, 2012 5:50:39 AM GMT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Feb 17, 2012 5:50:39 AM GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 19.1-b02 from Sun Microsystems Inc.>
<Feb 17, 2012 5:50:40 AM GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Feb 17, 2012 5:50:42 AM GMT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00220. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Feb 17, 2012 5:50:48 AM GMT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Feb 17, 2012 5:50:50 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Feb 17, 2012 5:50:50 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log00102. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log.>
<Feb 17, 2012 5:50:56 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Feb 17, 2012 5:50:56 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<MessageLocalizationHelper> <getLocalizedMessage> The resource for bundle "oracle.jrf.i18n.MBeanMessageBundle" with key "oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets" cannot be found.
<Feb 17, 2012 5:51:02 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application GeneralLedger is not versioned.>
<Feb 17, 2012 5:51:07 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application Rapppdf is not versioned.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00208. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Feb 17, 2012 5:51:27 AM GMT> <Warning> <Server> <BEA-002611> <Hostname "rmsys0061", maps to multiple IP addresses: 192.168.0.161, 192.168.2.161>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.2.161:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.0.161:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
IntegratedWebLogicServer startup time: 51640 ms.
IntegratedWebLogicServer started.
[Running application frmtesting on Server Instance IntegratedWebLogicServer...]
[11:21:30 AM] ---- Deployment started. ----
[11:21:30 AM] Target platform is (Weblogic 10.3).
[11:21:31 AM] Retrieving existing application information
[11:21:31 AM] Running dependency analysis...
[11:21:31 AM] Deploying 2 profiles...
[11:21:32 AM] Wrote Web Application Module to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\frmtesting\ViewControllerWebApp.war
[11:21:32 AM] Wrote Enterprise Application Module to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\frmtesting
[11:21:32 AM] Deploying Application...
<Feb 17, 2012 5:51:33 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application frmtesting is not versioned.>
[11:21:40 AM] Application Deployed Successfully.
[11:21:40 AM] The following URL context root(s) were defined and can be used as a starting point to test your application:
[11:21:40 AM] http://192.168.0.161:7101/frmtesting-ViewController-context-root
[11:21:40 AM] Elapsed time for deployment: 11 seconds
[11:21:40 AM] ---- Deployment finished. ----
Run startup time: 10812 ms.
[Application frmtesting deployed to Server Instance IntegratedWebLogicServer]
Target URL -- http://127.0.0.1:7101/frmtesting-ViewController-context-root/faces/untitled6.jspxhttp://127.0.0.1:7101/console/login/LoginForm.jsp. it stated as weblogicserver 11g admin console
At the botton(copy right section) 10.3.5.0

Hi,
There is one more method,i know
Set the JAVA_HOME and PATH
then execute the
$WL_HOME\wlserver_10.3\server\bin>setWLSEnv.cmd
Go to directory which contains weblogic.jar ($WL_HOME\server\lib) and run below command
$WL_HOME\wlserver_10.3\server\lib>java -cp weblogic.jar weblogic.version
WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255
Hope this will be helpful,
Regards
Fabian

How to retain numerical order (Of file names) when combining files in Acrobat (9) Standard

How to retain numerical order (Of file names) when combining files in Acrobat (9) Standard, please see the attached screenshot for a clearer explanation.
I understand that if we prefix all files with leading zero's this will probably resolve the issue but I just wondered if anyone new the answer. The ironic situation is that version 6 has no problem.
I have spent over an hour with techincal support who were unable to provide me with an answer

It is not clear how you are trying to do the order. Have you tried to select a set of files and then use the arrow buttons to move them in the list? If you select the heading, that will typically reorder the files by that heading and undo everything you had done before.
You should be able to select groups of files and move them up and down in the list. All of those options appear on your view, so what is the real question?

How to install video Integration component

Dear Experts
Link how to install video Integration component
https://websmp106.sap-ag.de/~sapidb/011000358700000739542010E/index.htm
Regards
Carlos Farías

It says
To install this component, just drag the File "XviD_Codec 1.0 alpha.component" into Library/QuickTime. The Library directory can be found either at your home directory (to install just for the actual user) or at the top-level of your startup volume (this needs an administrator account). DO NOT PUT IN: /System/Library/QuickTime.
Sounds normal to me. The "~/Library/QuickTime" folder is the standard location for user and application installed QT components which are used globally by all account users. On the other hand, the "~/System/Library/QuickTime" folder is where QT components installed by the operating system installer are placed for global use. These instructions appear to be correct.
It is possible that the QuickTime directory does not yet exists. In that case you can create it yourself. Pay attention to capital letters if you use a case sensitive file system (i.e. UFS).
I do not have Library/Quicktime.
Highly unlikely if you are running Mac OS X V10.5.8 as indicated in your posting. As you can see here, when the startup drive is opened at the root level, you should find a minimum of four folders—the "Applications" folder, the "Library" folder, the "System" folder, and the "Users" folder. Without these folders, your computer would be little more than an electrified paperweight.
I do not have Library/Quicktime.
Either you are looking in the wrong place or someone has been playing around on your system (e.g., in the Console app) and made the folder invisible.

How to convert numeric data to binary decimal in java

How to convert numeric data to binary decimal in java Pleas egive me code example

There is no numeric data. It's all binary. If you're talking about Strings, look at the Integer class.

How to configure the Integration Server Settins?

Hi,
I am doing a scenario like Idoc 2 File, I am passing parameter of Adapter Engine is a Integration Server, and when we generate a Idoc and send to XI system using TC: WE19. XI System is not picked the Idoc, and when i am checking RWB the Adapter Framework. Please Guide me how to configure the Integration Server setting.
Regards
Mohan

Hi,
did you checked the ur IDOC outbound status?
also check IDX5, whether it has reached XI system.
plz do check all ur settings:
1. Create RFC destination to XI in SM59 transaction
2. Create a port in we21
3. Create partner profile we20
4. we05- Idocs monitoring
XI Settings:
1. Create RFC destination to XI in SM59 transaction
2. Idx1 Port maintenance
3. Idx2 - Metadata maintenance
4. Idx5 All Idoc inbound and outbound messages
regards
Message was edited by:
Vijaya Lakshmi MV

How to keep data integrity with the two business service in OSB 10.3.1.0

How to keep data integrity with the two business service in OSB 10.3.1.0
In our customer system, customer want to keep data integerity between two businness service. I thinks this is XA transaction issue.
Basing customer requirment, I created a testcase but I can't keep data integerity, For detail information, please refer the attached docs.

Can you please explain what you meant my data integrity in your use case?
Manoj

How to create all Integration Directory with Directory API

How to create all Integration Directory
elements (Receiver determination, Interface Mapping, Communication channel Etc ) using Directory API
Can we upload multiple elements in ID from list in Excel sheet

Take a look to this "How TO", can be really helpful for your requirements:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0336199-d3c7-2c10-c983-f8a945a4588c?QuickLink=index&overridelayout=true

Numeric integration with variable division/integration interval

I want to calculate the area under a certain curve (data read from a spreadsheet file) by doing a numeric integration. The problem is that the interval between two adjacent points progressively changes from the start to end. I think I can get away with it by using a for loop. But is there a simpler way to do that. Thanks!

No need to use a for loop. You can calculate the area under the curve by direct calculations on the X and Y arrays. The method is not very accurate since it relies on the trapeze formula, but should work if your data points are not too distants. See the attached vi.
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Integration.vi ‏37 KB

Numeric integration

Hello
What dt means in numeric integration vi? from the help, it is known that dt represents the step size in numerical method. if the input signal is 1000hz sampling rate, should i put the dt=0.001s?or i just leave it blank?
in a meantime, i have interpreted that the dt represents the interval time from initial t1 to final t2 (within the boundary which is to be integrated). yet i get a correct result. but if i set sampling rate to 5000 hz, the area i get is terribly showing erratic result
there are 2 peaks/spike everytime the signal is acquired. i need to find the area under each peak. so by using detect trigger vi, can extract both peaks to become 2 individual peak in graph. then numerical integration is done on each individual peak.
i can get the good result of 1000hz sampling rate.
but not the replica of 1000hz sampling rate.
what mistake i have done?
thanks
regards

From the help - dt is the interval size, which represents the sampling step size used in obtaining data in Input Array from the function. If you supply a negative dt, the VI uses its absolute value.
Sampling step size is 1/sample rate. Do not leave it blank. The default is 1.

Using Numeric Integration.vi: Is this correct?

Hi:
I wanted to see if someone would be kind enough who has experience with the numeric integration.vi to check some code I have written to use this VI. At the top of the diagram is formula of what I need to code. Basically, what I am doing is integrating a function that I have calculated that is based on the cross-correlation function.
Thanks for your help.
Sincerely,
Don
Attachments:
cross-correlation_related_parameters.vi ‏236 KB

The "problem" that the function is not defined at negative times tau is a common one: it also happens e.g. in cross- and auto-correlation formulae. A real-world sampled signal always is measured during a finite period of time (mostly starting by convention at t=0), but mathematically the formulae assume an integration from -infinity to +infinity. You may look at the real signal as a product of an ideal one (unlimited in time) and a rectangular window function with value 1 between time=0 and time=T and 0 elsewhere. A Fourier transform of a (bounded in time) function can therefore be considered as the convolution of the Fourier transform of the (unbounded in time) function with the Fourier transform of a rectangular function (which is an x/sin(x) f
untion, AFAI recall). In order to minimize the related artefacts in FFT, people often use other than rectangular window functions before FFT'ing, the 'Hanning' and the 'Hamming' type functions being most widely used.
I don't know if for the formula you are evaluating also such a windowing 'trick' is possible to reduce the artifacts of the function being defined only between 0 and T, but to start with, I would simply assume that fcc(tau) is 0 for tau<0 and for tau>T.
(PS: another argument why in your formula a functional relation and not a product is meant: if it were a product, the integrand could be converted like
[fcc*(taumax+tau)-fcc*(taumax-tau)]^2=fcc^2*[2*tau]^2=4*fcc^2*tau^2, i.e. taumax wouldn't appear any more...)
regards
Franz

How to do numeric integration

Similar Messages

Maybe you are looking for