How to do report daily hour wise data in SAP BI-BO

We are implementing SAP BI with BO for a Retail Chain and the user wants to do reporting on store level for peak traffic hrs in a day and peak sales hrs in a day.
So the format using flat files will be
Date | Hour | Store | Footfalls | No. of Cash Memos
Hour will be like H1 , H2, H3 each mapped to an hour range from start time of store till closing time.
like H1 will be mapped to 9:00 am to 10: am, H2 - 10:01 am to 11:00 am assumig store starts at 9:00 am.
Is this kind of reporting possible in SAP BI.
I havent seen any option to map hour compounded to CALDAY in BI. Also we cant create new time characteristics lower in granularity than day.
Is it possible to do this kind of Analysis in SAP BI and also can be alternately use BO to pull this data directly from SAP ERP. Data in the format above will be loaded to SAP ERP from each store daily and we will extract data from there.

Hi,
You can create 2 Key figures, ztimefrom and ztimeto, both are of Time Data type.
You can fill the time range in these 2 KFs.
I am not sure about BO.
Thanks.

Similar Messages

How can we report on R/3 tables using SAP BO

How can we report on R/3 tables using SAP BO.
Thanks

Hi
you can use the CR Designer and build CR reports that access your R/3 system. Another option is to use the R/3 connector for the Data Federator which is available in the Innovation Center. Still this connector is not a product rather can be used on your own risk.
Regards,
Stratos
PS: Accessing directly the tables of the underlying database(e.g oracle) using universes and Web Intelligence is not recommended. You will not be able to decode all contents of the database tables you are accessing since in some cases R/3 encodes the data before storing them in the actual database tables.

How to get hour wise data in report?

Hi gurus,
I have one requirement in front end like retrieving data in hour wise suppose like 12.30pm - 4.30pm transaction sales data into the report since i have option to get only up to day wise data. Please do give me the relevant answers where do i need to do change?.
Thanks
Bharath

Hi Saravana
I am sure you must be getting the values in tables of table parameters from every FM.
consolidate the values from tables of all FMs in one table and built ALV for that table only.
I hope this way you can show the actual data in ALV.
thanks
Lalit

How to process reports with two different date fields

Morning all,
This question is somewhat similar to what I asked few days back. I created two different reports for two different departments (Credit Control and Free of Charge Control).
These two reports pull data from two different date fields and has different status check ups.
Few days back my director requested me if he can have both reports in one report. That is when I asked question from all of you regarding two reports.
Anyhow, that was created by implementing two sub reports however, the director asked me to combine the two different reports into one in such a way that the output records should be added up with each other hence one single report with all combined data of Credit Control and Free of Charges (not two sub reports in one report).
The problem here which I am getting is that, both reports uses two different date fields. I can live with two different statuses as that can be easily done within formula/RT however how to create a report with Report Selection Formula condition which looks in both date fields and produces results accordingly?
I have tried this by not putting any condition in report selection formula and ran the report, it produced total results from past 6 years.
Any ideas how to produce combined report which has two different date fields?
Many thanks in advance
Regards
Jehanzeb
What I

Charliy,
No the both dates are from two different databases, tables and fields. The Credit date field is from KLAB database under max table where as the FOC date field is from SAE database under maxmast table. Klab date is under credit2 table where as foc date is under order header table.
So its more like this:
Klab->Max-Credit2--->Credit_date
Sae->Maxmast->Order_header---Date entered.
two dates totally different tables, dbs
however, I will try your idea too and see if that works.
Regards
Jehanzeb

How to schedule report filtered by dynamic date based on the date the Agent runs

Hello
I have a question about delivering report using OBIEE agent.
If i am running an agent today to deliver report A, can I get report A based on Last Monday's date or any dynamic dates?
For example, say today is Dec 18th 2013 and my agent is running according to how I set the schedule. Now the deliver content will have report A being delivered. Now report A has a date column, normally this column is filtered by current date. But if it's delivered through agents to various users, Report A's data should be the previous Monday, so in this case Dec 9th 2013. When this agent is run again said on Dec 27th 2013, then report A should be filtered by Dec 16th 2013, which is the previous monday of Dec 27th.
Can something like this be achieved in OBIEE 11G?
Thanks in advance.

Yala,
Not a straight forward way
1) Let the report run through Agent with Current Date filter
2) once it ran for the first time you can see IBOT name/last run time(LAST_RUNTIME_TS) in S_NQ_JOB
Create a repository variable 'last_run_agent' using below sql to get max(LAST_RUNTIME_TS)
select max(LAST_RUNTIME_TS) from s_nq_job where name = 'AGENT_NAME';
Edit the analysis report with current date filter and modify the filter condition accordingly to filter on newly created repository variable
Thanks,
Saichand

How do I store 4 hours of data and get it out of the "while loop" into a spreadsheet file for documenting purposes? "See additional Text for additonal info"

What a have is a VI that uses the following SUbvi's, starts with FP OpenVI, then FP Create TagVI, into a "While Loop" which contains a FP ReadVI outputting data into a Index ArrayVI outputting to a Display (DBL). This shows the output of a FP-AI-100 monitoring a 9v battery. I have to monitor this battery for a 4 hour period my problem is storing the 4 hours of data and getting it out of the "while loop" into a "Write to Spreadsheet File VI" all I seem to accomplish is just one data sample which I get into a spreed ship file with no problem. I just can't get 4 hours worth. By the way this is my first VI and I'm self
trained so have mercy.

I figured it out thanks.
John Morris
Glendinning Marine

How do I store 4 hours of data and get them out of the "while loop" into a spreadsheet file for documenting purposes? "See additional Text for additonal info"

What a have is a VI that uses the following SUbvi's, starts with FP OPENvi, then FP Create Tagvi, into a "While Loop" which contains a FP READvi outputting data into a INDEX ARRAYvi outputting to a Display (DBL). This shows the output of a FP-AI-100 monitoring a 9v battery. I have to monitor this battery for a 4 hour period my problem is storing the 4 hours of data and getting it out of the "while loop" into a "Write to Spreadsheet File vi" all I seem to accomplish is just one data sample which I get into a spreed ship file with no problem. I just can't get 4 hours worth. By the way this is my first VI and I'm sel
f trained so have mercy.

I figured it out Thanks.
John Morris
Glendinning Marine

How to fill the table UD_SAPHR with data from SAP HR Connector

Hi, I`ve searched all the forrum but didn`t find how to map fields from connector form to the any field in OIM. I tryied with entity adapters but failed to reach any result. The problem is that I even cant put incoming data with connector to the table of the connector form (UD_SAPHR).
I will be grateful for any help. Below is the cut of the log. In few words - how to map, for example, field "Department=40000260" to the field in the USR table or UD_SAPHR table (or any other - to have this information in OIM).
OIM-9101Upd5, OS-Oracle Enterprise Linux4x64,SAP COnnector-SAP-ER90460, Database-Oracle 10gx64, Appication server-SOA(Oracle Application server)
INFO,01 Jul 2009 14:08:11,504,[XL_INTG.SAPHRMS],getDetailsForRecon(): *****************************
INFO,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],getDetailsForRecon(): 00000017
INFO,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],reconcileEmp(): SAPUserRecon for SAP : SAP HRMS IT Resource:EmployeeId=00000017
DEBUG,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],SAPUserRecon:returnDate(): Employee Status***3
DEBUG,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],EmpStatus***3
INFO,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],getUserId(): Recon key is 00000017
INFO,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],getUserId(): Hash Key is USR_UDF_PERSONNEL_NUMBER
INFO,01 Jul 2009 14:08:11,505,[XL_INTG.SAPHRMS],getUserId(): Get UserId of user with reconKey: 00000017
INFO,01 Jul 2009 14:08:11,506,[XL_INTG.SAPHRMS],getUserId():hmFilter: {USR_UDF_PERSONNEL_NUMBER=00000017}
INFO,01 Jul 2009 14:08:11,540,[XL_INTG.SAPHRMS],Result set rs contains : Thor.API.tcMetaDataSet@790a37
INFO,01 Jul 2009 14:08:11,540,[XL_INTG.SAPHRMS],getUserId(): Xellerate RS Count*** 0
DEBUG,01 Jul 2009 14:08:11,541,[XL_INTG.SAPHRMS],getUserId(): hmReturn ***{Create=0, UserLinked=0, userId=, UserKey=, XelUser=, Exist=0, User=}
INFO,01 Jul 2009 14:08:11,541,[XL_INTG.SAPHRMS],getUserId(): Recon key is 00000017
INFO,01 Jul 2009 14:08:11,541,[XL_INTG.SAPHRMS],getUserId(): Hash Key is USR_UDF_PERSONNEL_NUMBER
INFO,01 Jul 2009 14:08:11,541,[XL_INTG.SAPHRMS],getUserId(): Get UserId of user with reconKey: 00000017
INFO,01 Jul 2009 14:08:11,541,[XL_INTG.SAPHRMS],getUserId():hmFilter: {USR_UDF_PERSONNEL_NUMBER=00000017}
INFO,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],Result set rs contains : Thor.API.tcMetaDataSet@282f10
INFO,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],getUserId(): Xellerate RS Count*** 0
DEBUG,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],getUserId(): hmReturn ***{Create=0, UserLinked=0, userId=, UserKey=, XelUser=, Exist=0, User=}
DEBUG,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],sEmployeeUserID***
DEBUG,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],UserKey***
DEBUG,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],EmpStatus fetch from target System is 3
DEBUG,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],EmpStatus Mentioned in Task scheduler is 3
INFO,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],reconcileEmp():sUser get from Resource Object Table ***
INFO,01 Jul 2009 14:08:11,570,[XL_INTG.SAPHRMS],reconcileEmp():sXelUser get from Xellerate Table***
el Number=00000017, LinkedUserID=, Xellerate Type=End-User Administrator, First Name=п⌠п╣пҐпҐп╟пЄп╦п╧, Last Name=п■п╟п╡я▀пЄп╬п╡, Role=Consultant, Middle Name=FromHRMS=1}╣п╡п╦я┤, Userr
INFO,01 Jul 2009 14:08:11,571,[XL_INTG.SAPHRMS],Reconciliation of the user entered
DEBUG,01 Jul 2009 14:08:11,571,[XL_INTG.SAPHRMS],before create HR user reconciliation event***{PostalCode=, EndDate=9999/12/31 12:00:00 MSK, EmailAddress=, SSN=, State=, District=, TelephoneNumber=, Manager=, StartDate=1888/12/01 12:00:00 MSK, City=, EmplUserId=, UserLinked=0, UserLocked=0, FirstName=п⌠п╣пҐпҐп╟пЄп╦onnel Number=00000017, EmployeeId=00000017, Country=RU, Title=Mr, Department=40000260, MiddleName=п░пҐпЄя─п╣п╣п╡п╦я┤, LastName=п■п╟п╡я▀пЄп╬п╡}
INFO,01 Jul 2009 14:08:11,711,[XL_INTG.SAPHRMS],disableEnableXelUser(): Get UserKey of user with reconKey: 00000017 for SAP SAP HRMS IT Resource
DEBUG,01 Jul 2009 14:08:11,742,[XL_INTG.SAPHRMS],disableEnableXelUser(): Xellerate RS Count*** 0
INFO,01 Jul 2009 14:08:11,742,[XL_INTG.SAPHRMS],reconcileEmp(): User Reconciliation for Create & Modify User is completed.
INFO,01 Jul 2009 14:08:11,742,[XL_INTG.SAPHRMS],reconcileEmp() **** DONE RECONCILIATION

That is my problem. I get only those fields, that are in the xellerate user standard form. And I need also fields "Department" and "City".
This information connector gets from SAP (as it is seen in log) but doesn`t save it anywhere inside the OIM, though such fields exists in the UD_SAPHR table (and correspondend form) but this table remains empty after reconciliation.
DEBUG,26 Jun 2009 18:01:41,746,[XL_INTG.SAPHRMS],before create XL user reconciliation event***{Email=, Organization=Xellerate Users, User ID=00000072, Personnel Number=00000072, LinkedUserID=, Xellerate Type=End-User Administrator, First Name=п°пҐп╣, Last Name=п п╬п╪п©п╣пҐя│п╦я─я┐п╧п╨п╟, Role=Consultant, Middle NamomHRMS=1}
INFO,26 Jun 2009 18:01:41,746,[XL_INTG.SAPHRMS],Reconciliation of the user entered
DEBUG,26 Jun 2009 18:01:41,746,[XL_INTG.SAPHRMS],before create HR user reconciliation event***{PostalCode=, EndDate=9999/12/31 12:00:00 MSK, EmailAddress=, SSN=, State=, District=, TelephoneNumber=, Manager=, StartDate=1970/01/01 12:00:00 MSK, City=, EmplUserId=, UserLinked=0, UserLocked=0, FirstName=п°пҐп╣, Person Number=00000072, EmployeeId=00000072, Country=RU, Title=Mr, Department=40000240, MiddleName=п·я┌п©я┐я│п╨, LastName=п п╬п╪п©п╣пҐя│п╦я─я┐п╧п╨п╟}
Edited by: user6645106 on 03.07.2009 10:12

Crystal Reports Group-by-Summarized Data on SAP-BW

Hi experts
I am facing some strange problem while building report aginst SAP-BW
I have two groups of data set in crystal Reports
Ist group is on Business Area
2nd Group is on Cost Element(under business Area)
and (YTD- Amount) Across Business Area and Cost Element.
Problem: I am unable to get correct summarized amount for business area.(which should be sum of all cost elements under specific business area)
PS: I have done hireachial grouping as mentioned for SAP-BW practise.
And also tried to apply all summarized formulas with no result.
But iam unable to trace why it is happening.
Advance thanks
Krishna

did you try inserting the summary in a specific group footer?
regards,
Raghavendra

How to genetare reports(ssrs) with form library's data in sharepoint 2010

Hi,
How to genetare reports (ssrs) with form library's data in sharepoint 2010.I am saving infopath(2010) xml form data in form library.I have 500 and more forms in the form library( more forms can come in future).How to generate reports from this xml data (i
want to make it automate)? Reports should get updated automatically when any changes made to data and if new form entered in the library.
Please suggest possible solutions.I can not go for code base solution.( somthing SSIS, BCS or web service ....etc or anything else will be fine)
Thanks in advance.

Hi,
According to your post, my understanding is that you wanted to generate SSRS report with form library in SharePoint 2010.
In order to use the data stored on the InfoPath form, you need to add the controls on the form to be columns in SharePoint(This is the OOTB way without code).
You can add the control during the publish process:
Then when you create the SSRS report using the form library as the data source, you can use the fields just as the fields created in SharePoint.
There is a tool called InfoPath DB in codeplex, you can have a look at it.
http://infopathdb.codeplex.com/
More reference:
http://sharepoint.stackexchange.com/questions/28825/how-to-query-a-form-library-in-sharepoint-2010
http://sharepoint.stackexchange.com/questions/38492/reporting-against-a-form-library
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

How to get a Report for a past date.

Hi
Is there a way to get a report for a past date in SAP B1. For example I want to take a print out of Customer Receivables Aging Report for 30.06.2008 (Not the current Report.) without rolling back to that date from a backup.
Thank you very much
Sanjaya

Hi Sanjaya,
You can get the past dated or the backdated aging report by taking the relevant dates in the Aging report selection criteria window.
For backdated aging report you can refer to Note No. 800294
Example:
Today is the 12.12.2007, I need to see the ageing report for open customer receivables on 30.11.2007. Between the 30.11.2007 and 12.12.2007 some of the then open invoices have been paid.
Reports => Financials -> Ageing -> Customer Receivables Ageing
Set 'Ageing Date' last date of the period, here 30.11.2007.
Set 'Posting Date' from '01.01.2007' (= Start of fiscal year) to
'30.11.2007'.
Bring tab 'By Journal Postings' into the foreground.
Tick boxes 'Display Customers with Zero Balance' and 'Consider
Reconciliation Date'.
Click on 'OK'.
This setting will generate an ageing report showing all AR invoices posted between 01.01.07 to 30.11.07 that are not reconciled on 30.11.2007.
You can refer to the following thread as well :
Re: Vendor Ageing & G/L account
Hope it helps.
Kind Regards,
Jitin Chawla

How to Create Customer Contact data in SAP CRM

Hi All,
Would want to create Customer Contact data in SAP CRM, could please guide me step by step that how can i create the customer contact data in SAP CRM?
Regards
Avinav

Hello Avinav,
In CRM 6.0 and 7.0 GUI is no more used, you can use WEB UI and login using SALESPRO role to create a contact.
1. Logon to CRM web UI
2. Choose Create Contact from the Navigation bar
3. Enter all the data - Title, first name, last name, account id,
street, stree2, street3, street4, street5, city, postal code, email,
mobile no and website.
4. Press the Save key.
Hope it will help! Please award points in case this helps!
Best Regards
Lata

To prepare daily production report in grade wise

Hi,
Need your help regarding grade wise Finish Goods. My finish goods product code is in database 1601001. When bulk receipt from production how to separate grade wise quantity.
Example:
My production order quantity is 100000 pcs and receipt from production in stock is 95000 pcs. Now in 95000 pcs, 75000 are grade u201CAu201D quality and rest of 20000 pcs are u201CBu201D quality.
There is any option that I can prepare daily production report in grade wise.
Regards,
Mizan

Hi.....
Go to Item master data whihc you want to maintain Gradewise.
In general tab you find Serial or Batch Number under which just select Batch and select on every transaction......
This will hjelp you to manage your inventory by Batches which you consider as grade......
Regards,
Rahul

How to create a daily report for sales order

hi
how to create a daily report for sales order. what fields it must consists of. what are the tables it need?

Hi
You have to use the sales order tables VBAK,VBAP and VBEP
So keep date field on selection screen
and treat this date as Order creation data audat field in VBAK.
based on this fetch the data from VBAK and VBAP with the following fields like
VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS etc and display in the report
<b>Reward points for useful Answers</b>
Regards
Anji

How to make column headers in table in PDF report appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp

Hi my name is vishal
For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using iTextSharp.text;
using iTextSharp.text.pdf;
using System.Diagnostics;
using System.IO;
namespace DRRS_CSharp
public partial class frmPDF : Form
public frmPDF()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(6);
table.TotalWidth =530f;
table.LockedWidth = true;
PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
cell.Colspan = 6;
cell.HorizontalAlignment = 0;
table.AddCell(cell);
Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
para.Alignment = Element.ALIGN_CENTER;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(105f, 105f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("Reprocessing Date");
table.AddCell("Patient Name");
table.AddCell("Dialyzer(Manufacturer,Size)");
table.AddCell("No.of Reuse");
table.AddCell("Verification");
table.AddCell("DialyzerID");
while (dr.Read())
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
table.AddCell("@count".ToString());
table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
table.AddCell(dr[0].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
this.Close();
The above code executes well with no problem at all!
As you can see the file to which i create and save and open my pdf report is
AssignedDialyzer.pdf.
The column headers of table in pdf report from c# windows forms using iTextSharp are
"Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
"DialyzerID".
However the problem i am facing is after execution and opening of document is my
column headers in table in pdf report from
c# and datas in it all appear in bold.
I have browsed through net regarding to solve this problem but with no success.
What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
vb6,adodb with ms access using iTextSharp?
I have approached Sound Forge.Net for help but with no success.
I hope anyone/someone truly understands what i am trying to ask!
I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
I hope i get a reply in terms of solving this problem.
vishal

Hi,
About iTextSharp component issue , I think this case is off-topic in here.
I suggest you consulting to compenent provider.
http://sourceforge.net/projects/itextsharp/
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to do report daily hour wise data in SAP BI-BO

Similar Messages

Maybe you are looking for