How to drill down the values in ADF

Hi.,
I am using jdeveloper 11.1.1.5
I had created GLYearlyBalEo and GLPeriodicBalEO with corresponding VO
These are the attributes in GlYearlyBalEo
GAYB_BU, GAYB_YEAR, GAYB_ACCT, GAYB_OPBAL, GAYB_CRE_BY, GAYB_CRE_DATE, GAYB_UPD_BY, GAYB_UPD_DATE, GAYB_LVL1, GAYB_LVL2, GAYB_LVL3, GAYB_LVL4Thses are the attributes in GlPeriodicBalEO
GAPB_BU, GAPB_YEAR, GAPB_PERIOD, GAPB_ACCT, GAPB_DEBIT_AMT, GAPB_CREDIT_AMT, GAPB_CRE_BY, GAPB_CRE_DATE, GAPB_UPD_BY, GAPB_UPD_DATE, GAPB_LVL1, GAPB_LVL2, GAPB_LVL3, GAPB_LVL4My Scneario:
When i Click the Gayb_acct it must be drilled down to get the values of Gapb_acct
How can i get this., could any one please help me!!

Hi Wilhelm,
You can create associations for EO's and viewLinks for VO's to link the two.
Use the viewlinks to implement master detail behavior.
Create the association and viewlink based on the attribute that links yearly and periodic.
I'm not sure if this is what you are looking for because your post isn't that descriptive.
Good luck
Luc Bors

Similar Messages

How to drill down the cause of "SQL*Net message from/to client"

Pretty frustrated with my tune up using suggestions from many papers for Oracle 10g R2 on AIX 5.3 L system. My users told me that the system (including Baan 5c) still responds slowly in some processes, some even worsen.
Using both queries such as
SELECT sid, schemaname, status FROM gv$session ORDER BY 2;
SELECT inst_id, seq#, event, p1, p2, p3, wait_time FROM v$session_wait_history WHERE sid=<sid from above>
INST_ID SEQ# EVENT P1 P2 P3 WAIT_TIME
1 1 SQL*Net message from client 1413697536 1 0 6419
1 2 SQL*Net message to client 1413697536 1 0 0
and others similar, I found very large numbers (almost 97%) of the sessions have events as “SQL*Net message to client” and “SQL*Net message from client” on their wait_time even the sids are in inactive status. After checking the meaning of those messages in Oracle Performance and Tuning document, the document states that mainly they are probably network problems. So How can I drill down to what status of network from my client (the users) to server by Oracle or AIX? In Baan, it has its own parameter sets in its db_resource file controlling the connectivity. In average, there are 4000 “opened cursor current”, but most of them inactives.
So my colleague asked me rollback all th changes I did on OS level such as minperm%=5
maxperm%=90
maxclient%=90,
lgpg_regions lgpg_size,
sys0 maxuproc=512,
aio0 maxservers='260'
and many ioo parameters to system defaults.
I even removed the mulitplex copy of the redo log.
I tried to proof them that there maybe the problem of the Baan/Oracle connectivity, ie due to message above,

http://docs.oracle.com ... read them for configuration information.
http://tahiti.oracle.com ... read them for recommendations.
http://otn.oracle.com ... find the best practices docs.
http://metalink.oracle.com ... look for similar issues to yours.
People that change things, on production boxes, without first determining that metrics indicate they are a good idea, and then determining their impact on a test box, should be sold to zoos as leopard food.
PS: Slowly likely has absolutely nothing to do with anything you touched. First you tune the application. Then you tune the database. Then you tune the operating system. Get out of the way and make the DBAs do their job.

How to drill down and keep all my pivot table...

Hello experts!
I have a question about how to drill-down in pivot table. If I drill-down I can see the result in the same place...but it dissapear other bins or measures...
Example:
Pivot table:
A
B
C
If I click in A I can see:
a1
a2
a3
But I don't see B and C.
I would like to see when I click on A:
A
---a1
---a2
---a3
B
C
In my example I have a lot of bins to do drill-down...so it doesn't work for me to create three pivot tables and to do a union...
Is that possible? If you need more details you can post here...
Thank you!

Alex, this isn't another question. It looked like you were asking something different. That's why I said to start another thread. The bottom line is that OBIEE can't do what you are looking for.
But I think what is more important is not necessarily how to do what the OP wants, but what is the best way (read: most efficient, simplest, viable) to achieve the goal.
In this case, I think a better approach to your reporting is to use to Dashboard prompts. The first would be like Vehices (which has Cars, Trucks, Motorcycles, etc. in the drop-down window) and the second, constrained on the first, called Models/Brands (which has values dependent on what is chosen in the first prompt). With "All Choices" checked off in the prompt design, you have all the combinations a user needs to see in the pivot table. If the user chooses "Cars" from the first prompt, and "All Choices" in the second, then he/she will get all the car models displayed in the pivot table. Or, the user could select one particular moded from the start.
In fact, this is how many product web sites are set up. This gives the flexibility to the user and the report looks clean and efficient. You can have the drill down on the particular model (value interaction) if you wish to supply extra data on the particular model chosen.
I think this is the "correct" answer, Alex, though not the answer to the question you posed. Good luck.

Overal Result is changing when drill down the char - report is having cond.

Hi ,
we are running one report, the overal result is changing by drill down one char. if we remove drill down the same char. then it is displying the original value.
Note: we have one condition on the report. in the _Characterstiv Assignment tab_ the radio box Individual chars and Chars. combinations is selected.
can any one please sugest us, how to get the same result even though we dril down the other chars.
Thanks in Advance,
Raju

Hi Gangaraju,
If i am correct, the key figure column for which the total is changing is having the property set as "Calculate result as :Total" at query designer level.
If you want to display the same total irrespective of the drilldown of the characteristics then remove this property from the keyfigure in Query Designer .
Then you will see the original total irrespective of the characteristic being taken for drilldown.
I hope the above reply was helpful.
Kind Regards,
Ashutosh Singh

Taking long time to get the data while trying to drill down the freechar's

hi experts,
i have a query on 0sd_c03, in this query PLANT and SALES ORG. are in free characteristics, whenever i am trying to drill down the plant or sales organization it is taking lot of time to retrieve the data.
what is the problem,
give me suggestions to solve this problem.
thanks in advance,
venkat

From RSA1 double click on the infoobjects. Goto Business Explorer tab
For the option Query Execution Filter Val. Selection select Only posted values for navigation
Try whether thsi setting solves your problem

How do you get the value of a selected list item?

I have a drop-down list that the user can choose from. How do I get the value of what they selected? I thought I could do this by using the NAME_IN function, but I'm getting FRM-40105 Unable to resolve reference to item X. I don't know what I'm doing wrong.
Thanks!

Hi,
You can use an WHEN-LIST-CHANGED trigger, attached to the list-item itself. And, in this trigger, you can use the name of the item to refer its value.
For example:
:block_name.list_item_name
John

How can I set the value to a session bean from backing bean

Hi Experts,
How can I set the value to a session bean from backing bean where I have created getter and setter
methods for that variable.
Basically I am using ADFUtils class where I am able to get the value from session bean
using following expression
String claimType =
(String)ADFUtil.invokeEL("#{ClaimValueObj.getClaimType}");
Thanks
Gayaz

Gayaz,
Wrong Post !!
Post in JDeveloper and ADF
Thanks
--Anil

How to Drill Down Between Queries

Hi Experts,
I am fairly new to developing reports, so at the current system there are 2 queries Summary(on a Cube) and Detail(on ODS). These are independent queries rt now. I want to pass Cost center and fiscal Period as parameters from Summary to Detail queries and make it a drill down report so that for each cost element we can get the document details. I have read the other posts relavant to how to drill down while passing parameters but dint understand much out of those.
Can anyone please lay down a step - step approach in doing this? Or share any kind of explanatory documents.
Thanks
Sarah

Hi Sarah,
Each response you have received so far is recommending the Report-Report Interface (RRI). It is a powerful and useful technique. It is simple to do (minutes) and it works in all current and future front-end environments.
The problem with using is that users need a little bit of training. And the results they get are ALWAYS exactly as the "receiver" query is displayed in its Global Definition.
If your users are using Excel and you want them to use a standard template workbook for the receiver, this is difficult (not impossible) to obtain because you need to "touch" each of their PCs and ensure that they have the correct settings on their PC each time you have an upgrade of the front-end (either BW upgrade or PC upgrade).
In most peoples' opinion, the benefits of RRI outweigh the disadvantages.
There is another option if you are using Excel. You can put both queries in a single workbook and use the Business Explorer Analyzer's API functions to create a "Jump" from query 1 to query 2.
You can set this up to occur every time that query 1 is refreshed. Or, your user can select one (or several) results from query 1 to make the jump to query 2.
The great disadvantage of this alternative approach is that it requires use of both Visual Basic and the BEx API functions. Not very many people are good at either one of these. But, they are simple to learn and once you do, there is no end to the amount of customization that can be obtained.
If you want more information about this approach, post again. Or, do a search on previous posts that I have made (from these you will find the names of others who are very knowledgeable in this approach as well.)
Also, here is a link to some examples of BEx API functions that accompany an article written by Joerg Boeke
http://www.bwexpertonline.com/downloads/boeke04.doc
- Pete

Error while drilling down the data from reports

Hi friends,
I have created dimension hierarchies in rpd for drilling down the data.. While i drill down its showing no results at some level when i am clicking on the data.. but when i am clicking on the same levels column header its drilling down properly and i can view the next level for the data item which has shown no results while clicked on it.. Please help me and helps will be appreciated..

Hi,
>when i click on 2000 results displaying is no results
but when i click on the header year its showing the results with 3 for 2000.
So you are able to drill when you click on header..Go to column properties and make heading interaction to no interaction under column format,put value interaction to default and try to drill clicking on value.
in RPD i have some derived columns like month .I created month as derived column from date using logical formula and i used this derived columns as the key.. Is it a problem?No I dont think its a problem
Regards,
Srikanth

B520 - how to bring down the monitor contrast?

Brightness control in the front panel are not enough.
the backlight is too much for me to handle
Does anyone know how to bring down the contrast even more?
thank you.

I'll clear this up a little...
NVIDIA Controls does not have any control over the lamp / backlight on the screen. You can turn down
the gamma / brightness / contrast, and you may think you see it darker.
YEEEEEEES. it's dark but the intensity of the backlight is still there. You can feel it from miles away.
I chose Lenovo over ASUS just because of the GT555 option, and it was the worst mistake ever.
Asus Et2700 series do have Contrast/Brightness controls for the screen in Values from 0-100.
You can turn the screen completely dark if you want. Asus have never let me down, but thanks to my greed
always wanting more, thought i would never feel complete unless i had the gt555.
This is what happens when you fall for the marketing agenda.
Fortunately, i sold it already. And this would be the last time i'll purchase something from lenovo.
I'd like to think this is something that they just never thought. WRONG!!!. They know. they do it on purpose.
That's their way to make you feel incomplete, so you can start chasing for something else and fall again
in the marketing agenda.
There's always a way to make an "ALMOST PERFECT" product, the worst nightmare for you.
they have done this for years, since the beginning of times.
Let's not forget about the SATA performance issue in H67/P67 chipsets:
http://www.pcstats.com/articleview.cfm?articleID=2589
the B520 is one of the lines affected and lenovo did nothing about it.
And please let's not forget about the Trojan that got infiltrated in the drivers disc
for the B Series Line.
Hopefully, your campany will get a FORMAT C: by the end of this year.
arrivederci.

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

Hi,
Use NVL or COALESCE:
NVL (col_a, col_b)
Returns col_a if col_a is not NULL; otherwise, it returns col_b.
Col_a and col_b must have similar (if not identical) datatypes; for example, if col_a is a DATE, then col_b can be another DATE or it can be a TIMESTAMP, but it can't be a VARCHAR2.
For more about NVL and COALESCE, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions119.htm#sthref1310
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

How to get all the values from the dropdown menu

How to get all the values from the dropdown menu
I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
How do I get number of item is selection dropdown?
How do I extract a ?name? for each value, one by one?
How do I change a selection by referring to particular index of the item in a dropdown menu?
Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
Message was edited by: testtest

The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
<Select Name=ProdType ID=testProd>
</Select>
I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
If I want to search by id I could do the following:
Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
You can use the FindElement to grab links, text boxes, etc.
The next example grabs from a link on a page
Home
Set x = RSWApp.om.FindElement("Home","A","innerText")
I hope this helps clear it up.

Please, How do i get the values from a h:selectManyCheckbox ?

How do i get the values (selected or not) of a <h:selectManyCheckbox> tag and show them .For instance
i have the folowing options :
<h:selectManyCheckbox
                       id="cartas"
                   layout="pageDirection"
                    value="#{store.cartas}">
      <f:selectItems
                    value="#{cartas}"/>
    </h:selectManyCheckbox>
    <h:message styleClass="validationMessage" for="newsletters"/>with my faces-config.xml:
<managed-bean>
    <description></description>
    <managed-bean-name>cartas</managed-bean-name>
    <managed-bean-class>java.util.ArrayList</managed-bean-class>
    <managed-bean-scope>application</managed-bean-scope>
    <list-entries>
      <value-class>javax.faces.model.SelectItem</value-class>
      <value>#{cartas0}</value>
      <value>#{cartas1}</value>
      <value>#{cartas2}</value>
      <value>#{cartas3}</value>
    </list-entries>
</managed-bean>
<managed-bean>
    <managed-bean-name>cartas0</managed-bean-name>
    <managed-bean-class>javax.faces.model.SelectItem</managed-bean-class>
    <managed-bean-scope>none</managed-bean-scope>
    <managed-property>
      <property-name>label</property-name>
      <value>Semanal</value>
    </managed-property>
    <managed-property>
      <property-name>value</property-name>
      <value>200</value>
    </managed-property>
</managed-bean>
<managed-bean>
    <managed-bean-name>cartas1</managed-bean-name>
    <managed-bean-class>javax.faces.model.SelectItem</managed-bean-class>
    <managed-bean-scope>none</managed-bean-scope>
    <managed-property>
      <property-name>label</property-name>
      <value>As bruxas</value>
    </managed-property>
    <managed-property>
      <property-name>value</property-name>
      <value>201</value>
    </managed-property>
</managed-bean>
<managed-bean>
    <managed-bean-name>cartas2</managed-bean-name>
    <managed-bean-class>javax.faces.model.SelectItem</managed-bean-class>
    <managed-bean-scope>none</managed-bean-scope>
    <managed-property>
      <property-name>label</property-name>
      <value>Exercise</value>
    </managed-property>
    <managed-property>
      <property-name>value</property-name>
      <value>202</value>
    </managed-property>
</managed-bean>
<managed-bean>
    <managed-bean-name>cartas3</managed-bean-name>
    <managed-bean-class>javax.faces.model.SelectItem</managed-bean-class>
    <managed-bean-scope>none</managed-bean-scope>
    <managed-property>
      <property-name>label</property-name>
      <value>Gusman Park</value>
    </managed-property>
    <managed-property>
      <property-name>value</property-name>
      <value>203</value>
    </managed-property>
</managed-bean>Thanks for the atention!! All the best!!

Hi,
In your backing bean you will need to add a new variable to bind your control to, I think this variable needs to be of teh "HtmlSelectManyCheckbox" type. The on your jsp page you can add binding="#{myBean.myVariable}".
When you want to get the values of the selectMany in your backing bean, you can call the getSelectedValues() function on your HtmlSelectManyCheckbox variable.
in backing bean:
private HtmlSelectManyCheckbox hsmc;
public HtmlSelectManyCheckbox getHsmc(){
    return hsmc;
public void setHsmc(HtmlSelectManyCheckbox hsmc){
    this.hsmc = hsmc;
public void someFunction(){
   Object[] obs = hsmc.getSelectedValues();
}On jsp page:
<h:selectManyCheckbox
                       id="cartas"
                   layout="pageDirection"
                    value="#{store.cartas}"
                     binding="#(myBean.hsmc}">
      <f:selectItems
                    value="#{cartas}"/>
    </h:selectManyCheckbox>

How we can get the values from one screen to another screen?

hi guru's.
how we can get the values from one screen to another screen?
we get values where cusor is placed but in my requirement i want to get to field values from one screen to another screen.
regards.
satheesh.

Just think of dynpros as windows into the global memory of your program... so if you want the value of a field on dynpro 1234 to appear on dynpro 2345, then just pop the value into a global variable (i.e. one defined in your top include), and you will be able to see it in your second dynpro (assuming you make the field formats etc the same on both screens!).

How do I get the values from a form?

How do I get the values from a form?

You can try using request method..
request.getParameter("yourFormInputName");
Try this.

How to drill down the values in ADF

Similar Messages

Maybe you are looking for