How to email data in a table using BODI

Dear Pals,
I have a table with 1000 records, I want to send this data through mail as an attachment(EXCEL) every day at 9:00 AM . Can we do it using BODI?
Please do post if there is any way?
many many thanks in advance.
Regards,
Suneel Dirasanchu

Assuming BOE is consuming the data you have in your tables.
- Create a WebI Report on this table via universe OR Create a Crystal Report (via Universe or directly ) on the table and save it to BOE.
- Create a file event in BOE for this webi report to be kicked off.
- In the DI Job, use the exec command to place the file in the location that the file wait event on BOE is looking for.
- If you place the WebI or Crystal report to be scheduled to wait for the file event and choose the type of format (Excel, webI, etc) and destination(email as attachment).
I implemented this as part of hand off from DI to BOE system for a recent project. The WebI reports have been created by the reporting team and I place the files via the exec command. The reports are scheduled to run and send the email as an attachment.
Hope this helps!
Thanks & Regards
Tiji

Similar Messages

How to select data from a table using a date field in the where condition?

How to select data from a table using a date field in the where condition?
For eg:
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '31129999'.
thanks.

Hi Ramesh,
Specify the date format as YYYYMMDD in where condition.
Dates are internally stored in SAP as YYYYMMDD only.
Change your date format in WHERE condition as follows.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = <b>'99991231'.</b>
I doubt check your data base table EQUK on this date for the existince of data.
Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and <b> bdatu <= '99991231'.</b>
Thanks,
Vinay
Thanks,
Vinay

How to load data into user tables using DIAPIs?

Hi,
I have created an user table using UserTablesMD object.
But I don't have know how to load data into this user table. I guess I have to use UserTable object for that. But I still don't know how to put some data in particular column.
Can somebody please help me with this?
I would appreciate if somebody can share their code in this regard.
Thank you,
Sudha

You can try this code:
Dim lRetCode As Long
Dim userTable As SAPbobsCOM.UserTable
userTable = pCompany.UserTables.Item("My_Table")
'First row in the @My_Table table
userTable.Code = "A1"
userTable.Name = "A.1"
userTable.UserFields.Fields.Item("U_1stF").Value = "First row value"
userTable.Add()
'Second row in the @My_Table table
userTable.Code = "A2"
userTable.Name = "A.2"
userTable.UserFields.Fields.Item("U_1stF").Value = "Second row value"
userTable.Add()
This way I have added 2 lines in my table.
Hope it helps
Trinidad.

How to Select Data from different Tables Using Linq

Hi,
I have two different tables, I just want to collect data from tables using Linq to SQL Queries.
The tables looks like This
ID Name ImageUrl
Other Table is
ID EmpID CheckInTime CheckOutTime
What I want to Collect data from CheckInTime and want to place it in a that is in a list view
Same thing I want to do it for CheckOutTime And One thing I want to tell is both tables are joined by a FK EmpID with ID.
What Are the suggestions for me
I have Used this code
var data = from emp in db.Employees
join chk in db.CheckInCheckOuts on emp.ID equals chk.EmpID
select new EmployeeCheckInOut
Name = emp.Name,
ImageUrl = emp.ImageUrl,
CheckIn = emp.CheckInCheckOuts,
CheckOut = emp.CheckInCheckOuts
Here the CheckInCheckOuts is another table, I don't how do I access fields of the Other table "CheckInCheckOuts"
Thank you
Ali

Mitja,
Kind of Tables, I don't Know but I can Tell you that these are Two table, first Table Have Data in It, Name, ImageUrl I have filled this table with names and ImageUrls And are string type.Other Table is for the CheckInTime And CheckOutTime of the employee.
What I need that when I click on the Image button it Should displays The Current Datetime into the label below the Image button.
So I have Problem accessing my CheckInCheckOut Table because I may not have Idea about.Did you understand what I need to do, if you have more question please ask to me.
Thanks
Ali

How could we read the XML data from a table using BODS.

Hi Guys,
My requirement is , As the OLTP system consists of a table called person which consists of a column demographics. so how could i read this XML data which is in one column of an SQL table called persons. As this XML data will populate the remaining fields in my target using BODS.
Regards,
Amjad.

Hi Amjad,
I am afraid there ain't any direct method to extract XML field from a data base.
Indirect way could be converting the whole table (instead of one field) into XML format and then extract one field from it!!
Regards,
Mubashir Hussain

How to change data in decision table using excel file in operating system?

Hello, BRF Experts
I now brf + for the first time in the current project is being developed.
Now, project has been facing a big problem.
Develop system that was developed in the history of decision table in the operating system can be used to update excel file, etc. I do not know whether.
So, I was tested, but can not change data in decision table.
[ error message : system is not change allowed ].
The operating system itself to the current system setting is immutable and check it
: changes and transports for client-specific object -> no changed allowed
: cross-client object changes -> no changes to repository and cross-client customizing object.
Decision table in the operating system can update the details if I want to know what to do.
Maintenance view can be modified in the operating system as a decision table, I wonder if you can create a view.
Edited by: Sung-Wook Ha on Jan 13, 2012 2:02 PM

Hi ,
Exchanging data with Microsoft Excel is done with the help of the XML-based file format (file extension .XSLX) introduced with Microsoft Excel 2007. If you are using an older version of Microsoft Office, you can download the Microsoft Office Compatibility Pack to upgrade the supported file formats from the Microsoft Download Center ([Exchanging Decision Table Data With Microsoft Excel |http://www.microsoft.com/downloads/details.aspx?familyid=941b3470-3ae9-4aee-8f43-c6bb74cd1466]). Once you have downloaded the Compatibility Pack, you have to install it on every workstation that has an older version of Microsoft Office installed.
Please refer the link-
[BRFplus-Data exchange with MS Office 2007|http://help.sap.com/erp2005_ehp_05/helpdata/en/b8/e03486d1df48c6baa3c4354f5198ee/frameset.htm]
Hope this helps.
Thanks,
Ajay

Hey guys how to fetch data from db table using subroutine

hi guys,
               I am fetching data from db table "mcha". now in the follwing code i get it in "HSDAT1_DATE."
               now when i read out_tab with key "HSDAT1". it wont come in out_tab-value.plz tell me what is wrong whether some key condition in out_tab or any thing else.
and what should i write in changing && in script.
thanks in advance
FORM DATE_MGF TABLES IN_TAB STRUCTURE ITCSY
                     OUT_TAB STRUCTURE ITCSY.
tables :MCHA ,QALS.
DATA : WERKS1 LIKE QALS-WERK.
DATA : HSDAT1 LIKE MCHA-HSDAT.
DATA : DATE(2),
         MONTH(2),
         YEAR(4).
DATA : HSDAT1_DATE(10).
READ TABLE IN_TAB WITH KEY 'QALS-WERK'.
LOOP AT IN_TAB.
    IF SY-TABIX EQ 1.
      WERKS1 = IN_TAB-VALUE.
      IF WERKS1 NE SPACE.
        EXIT.
      ENDIF.
    ENDIF.
ENDLOOP.
SELECT SINGLE HSDAT INTO HSDAT1
                      FROM MCHA
                                WHERE WERKS = WERKS1.
DATE = HSDAT1+6(2).
MONTH = HSDAT1+4(2).
YEAR = HSDAT1+0(4).
CONCATENATE DATE '.' MONTH '.' YEAR INTO HSDAT1_DATE.
READ TABLE OUT_TAB WITH KEY 'HSDAT1' .
IF SY-SUBRC = 0.
    OUT_TAB-VALUE = HSDAT1.
    MODIFY OUT_TAB INDEX SY-TABIX.
ENDIF.

Hi,
Let me understanf clearly what you want.
initally mine out_tab is blank
According to you, your table out_tab is blank. And you need to add out_tab-value = HSDAT1_date.
READ TABLE OUT_TAB WITH KEY 'HSDAT1' .
IF SY-SUBRC = 0.
    OUT_TAB-VALUE = HSDAT1.
    MODIFY OUT_TAB INDEX SY-TABIX.
ENDIF.
So, if your table is blank, then read statement will fail.
Please let me know if your table out_tab in blank when you are reading the table and if this table contains any field called HSDAT.
Basically i would like to know your internal table out_tab declaration.
Thanks,
Archana

Adding data to multiple tables using one form in Access 2010?

Hi All,
I have a access database with two tables and I want to create a single form to enter data into that tables.
How to adding data to multiple tables using one form in Access 2010?
I don't have to much knowledge of access database?
Please help me
Thanks
Balaji

You really don't enter identical data into 2 tables. You enter dat into one single table, and then you have an unique identifier that maps to another table (you have a unique relationship between two tables).
Maybe you need to read this.
http://office.microsoft.com/en-001/access-help/database-design-basics-HA001224247.aspx
Think about it this way... What is you update data in 2 tables, and then the data in one of those tables changes, but the data in the other table does NOT change. WHOOPS!! Now, you've got a BIG problem. For instance, you have a customer
named Bill Gates. In one Table you update Bill's address to 1835 73rd Ave NE, Medina, WA 98039 and in the other table you accidentally update Bill's address to 183 73rd Ave NE, Medina, WA 98039. Now you have 2 addresses for Bill. Why would
you want that??? Which is right? No one knows. If you have one address, you just have to update one address and if there is a mistake, you just have to update one address, but you don't have to waste time trying to figure out which is right
and which is wong...and then update the one that is wrong.
Post back with specific questions.
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

How to insert data in database table

Hi experts,
How to insert data into database table using internal table from function module.

Hi,
As per my understanding are you looking for the complete API feature of data insertion into the database using the Locking Mechanism? If yes, then you need to create a Lock Object using the Primary keys of the Primary Table and Secondary Tables. You need to call the lock object first and then you need to make the entry into the table. This principle is based on 'All or None Concept'.
For the insert Statement Key word you can have a look at the following link:
http://help.sap.com/abapdocu/en/ABAPINSERT_SOURCE.htm
Hope this helps.
Thanks,
Samantak.

How to fetch data from PTREQ tables

I need to display data in the customised webdynpro application from PTREQ tables.
Can anyone help me out how to fetch data from these tables.

use the standard modules like
PT_ARQ_REQUEST_CHECK
PT_ARQ_REQUEST_EXECUTE
PT_ARQ_REQUEST_PREPARE

Read data from ODS table using value mapping

hi all;
can anyone help on how to read data from ODS table using value mapping

Mudit,
Take a look at this blog,
<a href="/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler">DB Lookup in Mapping</a>
Regards,
Bhavesh

How to delete the data in a table using function

hi all,
i need to delete the data in a table using four parameters in a function,
the parameters are passed through shell script.
How to write the function
Thanks

>
But the only thing is that such function cannot be used in SQL.
>
Perhaps you weren't including the use of autonomous transactions?
CREATE OR REPLACE FUNCTION remove_emp (employee_id NUMBER) RETURN NUMBER AS
PRAGMA AUTONOMOUS_TRANSACTION;
tot_emps NUMBER;
BEGIN
SELECT COUNT(*) INTO TOT_EMPS FROM EMP3;
DELETE FROM emp3
WHERE empno = employee_id;
COMMIT;
tot_emps := tot_emps - 1;
RETURN TOT_EMPS;
END;
SQL> SELECT REMOVE_EMP(7499) FROM DUAL;
REMOVE_EMP(7499)
              12
SQL> SELECT REMOVE_EMP(7521) FROM DUAL;
REMOVE_EMP(7521)
              11
SQL> SELECT REMOVE_EMP(7566) FROM DUAL;
REMOVE_EMP(7566)
              10
SQL>

How to write a procedure to load the data into a table using xml file as input to the procedure?

Hi,
Iam new to the xml,
can u please anyone help me how to write procedure to load the data into a table using xml as input parameter to a procedure and xml file is as shown below which is input to me.
<?xml version="1.0"?>
<DiseaseCodes>
<Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
</DiseaseCodes>.
Regards,
vikram.

here is the your XML parse in 11g :
select *
from xmltable('//Entity' passing xmltype
'<?xml version="1.0"?>
<DiseaseCodes>
<Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
</DiseaseCodes>
') columns
"dcode" varchar2(4000) path '/Entity/dcode',
"ddesc" varchar2(4000) path '/Entity/ddesc',
"reauthflag" varchar2(4000) path '/Entity/reauthflag'
dcode                                                                            ddesc                                                                            reauthflag
0                                                                                (I87)Other disorders of veins - postphlebitic syndrome                           0
0                                                                                (J04)Acute laryngitis and tracheitis                                             0
0                                                                                (J17*)Pneumonia in other diseases - whooping cough                               0
SQL>
Using this parser you can create procedure as
SQL> create or replace procedure myXMLParse(x clob) as
2 begin
3    insert into MyXmlTable
4      select *
5        from xmltable('//Entity' passing xmltype(x) columns "dcode"
6                      varchar2(4000) path '/Entity/dcode',
7                      "ddesc" varchar2(4000) path '/Entity/ddesc',
8                      "reauthflag" varchar2(4000) path '/Entity/reauthflag');
9    commit;
10 end;
11
12 /
Procedure created
SQL>
SQL>
SQL> exec myXMLParse('<?xml version="1.0"?><DiseaseCodes><Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity></DiseaseCodes>');
PL/SQL procedure successfully completed
SQL> select * from MYXMLTABLE;
dcode                                                                            ddesc                                                                            reauthflag
0                                                                                (I87)Other disorders of veins - postphlebitic syndrome                           0
0                                                                                (J04)Acute laryngitis and tracheitis                                             0
0                                                                                (J17*)Pneumonia in other diseases - whooping cough                               0
SQL>
SQL>
Ramin Hashimzade

How to update the data in sqlserver table using procedure in biztalkserver

Hi,
Please can any one answer this below question
how to update the data in sqlserver table using procedure in biztalkserver
while am using executescalar,typedprocedure getting some warning
Warning:The adapter failed to transmit message going to send port "SendtoSql1" with URL "mssql://nal126//MU_Stage2?". It will be retransmitted after the retry interval specified for this Send Port. Details
Please send me asap....
Thanks...

Hi Messip,
A detailed error would have helped us to answer you more appropriately but
You can follow the post which has step by step instructions, to understand how to use Stored Procedure:
http://tech-findings.blogspot.in/2013/07/insert-records-in-sql-server-using-wcf.html
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
2013: Inserting RawXML (Whole Incoming XML Message) in SQL database

How to write data to text file using external tables

can anybody tell how to write data to text file using external tables concept?

Hi,
Using external table u can load the data in your local table in database,
then using your local db table and UTL_FILE pacakge u can wrrite data to text file
external table
~~~~~~~~~~~
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_7002.htm#i2153251
UTL_FILE
~~~~~~~~~
http://download-east.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_file.htm#sthref14093
Message was edited by:
Nicloei W
Message was edited by:
Nicloei W

How to email data in a table using BODI

Similar Messages

Maybe you are looking for