How to embed Arial Unicode MS in Fla file

Hi
I am new to Flash development hence some of the comments/queries might seem very trivial.
I am working on the flash file which was originally developed for English language. Now client would like to extend it to other languages such as Janpanese, Hindi etc.
Flash component is developed in Windows operating system and CS3 is being used for development.
The flash consists of a movie clip control which shows characters read from external source. Text to displayed is assigned to "htmlText" property.
The fla has embedded a custom font file. The font file customized to replace two glyphs (@ and ?) with gif file. Based on certain condition, "@" and "?" are rendered using custom font
for example.
if (condition == true)
then
movieClip.htmlText = <font face="CustomFont">U0040</font> + {Rest of the text}
Under Text->Font Embedding... dialog box, Character Ranges options has "All glyphs" and "Punctuations"
Under Also include characters --> "@?" are included.
When I try to embed Arial Unicode MS font, None of the unicode characters are displayed. Only custom font character is displayed.
When change the font embedding settings for custom font and remove option "All glyphs" and "Punctuations" and also remove "@?" from "Also include characters"
then unicode characters are displayed by custom font U0004 is not replaced with custom font.
Another observation is: If I install fonts in system then it works fine. But that is not expected behavior end users will not have custom font in their system, neither can I ask them to install.
Can anyone please guide me on this issue?
Regards,
RK

Hi,
What do you mean in "want to embed the font "Arial Unicode MS""?
Do you want to hard code font in UIX code?
Thanks

Similar Messages

How can I copy layers from one .fla file to another .fla file?

Hi,
How can I copy layers from one .fla file to another .fla file? Please do help.
Thanks.

Select all the frames you want to copy, right click and select copy frames then select the file you want to paste them into and right click again and then paste frames.
The layers the frames are should come across with them.

How to embed the Word Document and PDF file into Crystal report?

How to embed the Word Document and PDF file into Crystal report?
I have word doc which having 10 pages. I need to show all of the 10 pages at a time. I tried OLE object but problem is it shows only one page.
Is there any solution to show word doc / PDF file in CR?

Symptom :
When embedding a pdf document into a Crystal Report, only the one page shows.
Reproducing the Issue
Environment:
Crystal Reports OLE object
Cause
An OLE object only displays the first page.
Resolution
Embed multiple objects, one for each page
Or
Use a hyperlink to the object instead
Hope this helps!
Regards,
Vinay

How to embed a signature in the PDF file with Java?

Hello All!
There is no problem to sign a PDF with Java for me. But how to embed this signature in the PDF. I really don't know. I've found the PdfSignature class in the iText lib. But it is poor.
I've read on the another forum: "If you want to do server-based signatures, there is only one option - SecurSign http://www.appligent.com)."

How to sign a PDF using iText

How to load movie clip internal in .fla file

Hi - How do I load a movie clip inside a .fla file?........I
know the script to load a .swf file but I do not know the script to
load a movie clip (New symbo l= movie clip) made in the same .fla
file.
I have a series of movie clips I woud like to load with a
button - can anyone please guide me in the right direction with a
script or some info.....
Thanks
steen

Do you mean loading clips that are in the library?
Use MovieClip.attachMovie();
Dan Mode
--> Adobe Community Expert
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
*THE online Radio*
http://www.tornadostream.com
*Must Read*
http://www.smithmediafusion.com/blog
"Jean Bang" <[email protected]> wrote in
message
news:ef88kj$c10$[email protected]..
> Hi - How do I load a movie clip inside a .fla
file?........I know the
> script to
> load a .swf file but I do not know the script to load a
movie clip (New
> symbo
> l= movie clip) made in the same .fla file.
> I have a series of movie clips I woud like to load with
a button - can
> anyone
> please guide me in the right direction with a script or
some info.....
>
> Thanks
>
> steen
>

Newbie question - how to save images out of an fla file

I have what I'm sure is a very basic flash question. I have a flash movie (swf) and the accompanying fla file. I can open the fla file, and see all the images used in the file (symbols in the library), but how can I export or save one of these images separately from flash?

you can right click, copy an image and then paste it into your choice of photoediting software.

How to: Embed YouTube in Ibook/Location of File, Open in Dashboard Widget Code?

Hi,
I am new to the whole Mac experience and loving it after 25 years locked into the MSGATES paradigm. I have been playing around with Ibook and have made a book. I would like to embed a You Tube file and it seems it is not as simple as slecting an HTML widget and then dropping in the Youtube embed code. Or is it?
Instructions are to create a widget and then drag the widget code into the HTML widget in iBooks. I was able to make it as far as to learn I can make my YouTube video a custom dashboard widget using the "File," "Open in Dashboard" method in Safari.
Once I did this I was able to select the portion of the YouTUBE page and click to make the YouTube widget. Presto, easy as pie. But where is the .wdgt file (and/or other related files to this custom dashboard widget) stored? I was able to find the widget directory in my root but only the preinstalled widgets were there--not the the widget I was able to make with the "File," "Open in Dashboard" method.
Is this the most straightforward way to embed a You Tube file, or is there another way?
It seems this should/can be as easy as just dropping the embed code into the HTML widget in iBooks. perhaps a consideration for the next version of iBooks...
Lov'in the Apple experience

We use a container thats ratio matches the video and insert following format into the folio overlay controls for Web Content: https://www.youtube.com/embed/ jyOFS5lAG68 *PLEASE NOTE: there is a space between the embed/ the video ID. Remove it to see how the video looks when you paste the link.
We found this works on both iOS and Android.
-Ry-

How to write a unicode text in pdf file

Dear Friends,
I am a beginner in acrobat pdf plug-in development. I was trying to write a unicode text (Tamil text) into pdf file.
Using same api I am able to write english text in time-roman, areal etc fonts. But I am not able to write tamil texts.
The code is as below:
        memset(&pdeFontAttrs, 0, sizeof(pdeFontAttrs));
        pdeFontAttrs.name = ASAtomFromString("Latha");
        pdeFontAttrs.type = ASAtomFromString("TrueType");
        pdeFont    = PDEFontCreateFromSysFont(                                        \
                        PDFindSysFont(&pdeFontAttrs, sizeof(pdeFontAttrs), 0),    \
                        kPDEFontCreateEmbedded);
        pdeText = PDETextCreate();
        PDETextAdd(pdeText, kPDETextRun, 0, (ASUInt8 *)buffer, _tcslen(buffer),
                                pdeFont, &gState, sizeof(gState), NULL, 0, &textMatrix, NULL);
        PDEContentAddElem(pdeContent, kPDEAfterLast, (PDEElement)pdeText);
        PDPageSetPDEContent(pdPage, gExtensionID);
        PDPageReleasePDEContent (pdPage, gExtensionID);
KIndly assume that PDEGraphicsState and PDETextMatrix are set properly set, I am not pasting entire code to avoid complexity.
Thank you,
Safiq

Dear lrosenth,
I went through some codes/suggestions in internet and I found that I need to have cmap file and cid font file for the respective font since pdf doesn't support unicode fonts directly.
Can you help me to know where can I get cmap file and cid font file for tamil language font Latha(TrueType) microsoft font.
Regards,
Safiq

Basic question on how to change menu text in this FLA file

I am kind of new to Flash and I am just a bit stuck on where
I am suppose to edit the menu text in the flash file I purchased
(link below).
I can see where to edit the hyperlinks in the action script
for each menu item but I can find the text (e.g. I want to change
the word “Our Gallery” and type
“Competitions”
http://www.abcpchelp.com/header3_fv8.fla

Hello IawaGuy:
Thanks for getting back to me. I've been really having a
problem with this flash header. Being new to some of these programs
doesn't help much. It's been a learning curve for me. I used a
program called Flash Decompiler Trillix to convert the swf to fla.
and converting the symbols as text so that I could edit them. It
turned out that the text that came up was a jumble of letters which
I had to decifer. I was finally able to change the all the text to
what they were supposed to be. After I exported it back into the
website in Dreamweaver the links on the drop down menus didn't
work.
It's as if the layers aren't connected in some way. The main
links work but I can't access the drop down part which also contain
links as well. I hope you can help me with this.
Thanks,
Glenn
Email me and I will send file by
reply

How to embed a pdf in a pdf file like we embed in MS word/PPT

Please help me
I receive some jobs in word files (sometimes in PPT) with PDFs embeded and want me to make compatible for viewing on ipad and PC as well.
I found creating/inserting navigation menus in PDF itself could help me in flowing as the solution using hyperlinks and inserting the destination pages at the end of pdf which resulted in increase in number of pages. Please can you suggest me if there is anything I can do better. (As our client is bothering about number of pages in pdf)
Hope I presented my problem clearly.
Regards,
Hari

Hi Hari Prasad,
You may visit this video tutorial and check if that help you:
http://tv.adobe.com/watch/acrobat-x-tips-tricks/how-to-combine-multiple-files-into-one-pdf -file/
If you need more help let me know.
Regards,
Ajlan Huda.

How to embed fonts in a textbox in adobe acrobat 9

Hi all,
The forms has beed designed in adobe acrobat 9.It has the text in the textboxes with a fontstyle of DejaVu Sans Mono.The client or the user generates the form by clicking on the appropriate link and the textboxes are populated accordingly.The problem is they dont have the fontstyle used in the textbox installed on their system.So whenever they generate the pdf the font in the textbox doesn't print in properly.Is there anyway we could force it to use the font which we have originally set up.Thanks in advance

Bernd Alheit wrote:
Read this:
http://www.ehow.com/how_6566713_embed-fonts-pdf.html
I have the somthing like the following in Ctrl-D Fonts. They can not be embedded using the method above. I guess it is because the fonts in the original pdf are not available in the system. But how to embed the substitutes in the pdf file.
Helvetica
    Type: Type 1
    Encoding: Custom
    Actual Font: Helvetica
    Actual Font Type: TrueType

(How can we) Import Flash Professional .FLA file format?

How can we import a Flash Professional .fla file format into Flash Catalyst? It would appear that we can't...at least not yet! I have added this as a feature request within the adobe labs site for Catalyst. Someone at Adobe suggested that I also explore the forums, so here we are. If you would also like to have this feature added, please let Adobe know by promoting the
idea.
Our use case is this: we have a large Flash file with a library of over one thousand skins and assets that were built in Flash with Adobe's Flex Skins Templates. These stateful, graphical skins were used within a custom theme by several Flex 3 projects.
Now that we are looking to migrate to FlashBuilder 4, and start to use Spark components, we are trying to find a workflow that allows us to use Adobe tools and to reuse our existing vector artwork. Since we have such a large number of assets, we are exploring various approaches, including the use of JSFL. So far we haven't found a good way to migrate from Flash-built skins for Flex 3 to Catalyst-built skins for FlashBuilder 4.

Hi Ajay,
See attached V 7.0 example...
Hope it helps,
Nick
Attachments:
Read_txt_File.vi ‏20 KB

How to embed fonts in a pdf file

I have a pdf that has some fonts not embedded. I think that distiller might be able to embed the fonts when I print the pdf file, but it is inconvenient and may not always work. Is there a direct way to embed the fonts in Acrobat? Thanks!

Bernd Alheit wrote:
Read this:
http://www.ehow.com/how_6566713_embed-fonts-pdf.html
I have the somthing like the following in Ctrl-D Fonts. They can not be embedded using the method above. I guess it is because the fonts in the original pdf are not available in the system. But how to embed the substitutes in the pdf file.
Helvetica
    Type: Type 1
    Encoding: Custom
    Actual Font: Helvetica
    Actual Font Type: TrueType

How to make a movieclip and import it to another fla file ?

Hi,
I am having one of those 'self doubt sanity' moments.
Entering melt down here !
I want to make a movieclip from a graphic map background, and some existing movieClips that reside in another .fla
In this other .fla file the movieclips are in the wrong layer so by starting over I wish to tidy things up.
How do I create a movie clip from such ?
Then I start thinking, how does one create a movie clip, then bring it into another file ?
I even did a test that went:-
1) create new AS3 file
2) draw a box
3) select box and hit F8 Convert to symbol, select movieclip and name it box_movieclip
4) d/click box and made a classic tween and had box moving across stage.
5) save as and named file MovieClip_Boxtest.fla
6) open new file AS3 and import to library the BoxTween.fla and got a message saying One or more files not imported as problems reading them.
So having done the above stages 1 to 5 which made a movieclip, how do I get that into another fla file ?
having done this before I am panicking that I have lost some brain cells !
Envirographics.

When I want to move a movieclip from one fla to another I just right click it in the library and select copy. Then I go to the library of the other fla, right click the library (off any other symbols) and select paste.

How to embed Google analytic tag in SSRS

Hi ,
How to embed Google Tag Manager tags in SSRS.I need to embed google tag in RDL files.

<noscript><iframe src="//www.googletagmanager.com/ns.html?id=GTM-PQ85KB"
height="0" width="0" style="display:none;visibility:hidden"></iframe></noscript>

I need to embed this tag in my RDL file.Please help me how to do this.
Thanks,
Vijay

Hi Eswar,
Thanks for the reply.I have implemented the way which they have mentioned but it;s not working.
Actually we need to embed Google Tag Manager in RDL files.We need to have an entry in google server on any button click.So we need to embed especially google tag manager in RDL.

<noscript><iframe src="//www.googletagmanager.com/ns.html?id=GTM-PQ85KB"
height="0" width="0" style="display:none;visibility:hidden"></iframe></noscript>

Please help us how to embed google tag manager in RDL file.
Thanks,
Vijay

How to embed Arial Unicode MS in Fla file

Similar Messages

Maybe you are looking for