How to enable "Dedicate system resources to server services" option?

I am unable to check the "Dedicate system resources to server services" option in Server.app. When I click the checkbox, I am prompted to restart. Upon restarting, the box remains unchecked. I have tried multiple times to enable this option, yet it always fails. Any help appreciated. Thanks.

Check the diagnostic output during verbose booting to find out what's going on.
from the man page:
NAME
     rc.server -- server-specific boot initializations
SYNOPSIS
     rc.server
DESCRIPTION
     rc.server is the server-specific command script invoked by launchd(8) to tune system parameters before system processeses are started.
     launchd guarantees that rc.server is run before services are bootstrapped so that resource limits are inherited by all system processes. Therefore, actions in this script only have read access to the root filesystem and logging facilities are not available. Output is directed to the system con-
     sole and may be viewed using verbose boot.
     This script and specific resource settings may change at any time, such as by hardware reconfiguration or software updates. System specific overrides should be done in sysctl.conf(5), launchd.conf(5), or service specific launchd.plist(5) configuration files.
     The following sysctl(8) settings are among those that may be tuned by this script:
           kern.ipc.somaxconn
           kern.maxproc
           kern.maxnbuf
           kern.maxvnodes
           kern.maxfiles
           kern.maxprocperuid
           net.inet.tcp.delayed_ack
     rc.server will only be executed to tune the system if it is determined to be a server configuration.
FILES
     /etc/rc.server
DIAGNOSTICS
     Since rc.server is invoked before system logging is available, diagnostic output is only available to console during verbose boot.

Similar Messages

How to enable remote connections in SQL Server 2008

I'm trying to enable remote connections in SQL Server 2008 R2 as described in the following article. I see the error message at the top of the article.
http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx
One step in the article describes how to enable TCP/IP in Configuration Manager.  Specifically it says that
'SQL Server NETWORK Configuration' should have TCP/IP enabled.
The issue I've encountered is that my Configuration Manager
is different than what appears in the article. My Configuration Manager shows the following:
SQL Server 2005 Services
SQL Server 2005 Network Configuration (32 bit)
      - Protocols for SQLExpress
SQL Native Client Configuration (32 bit)
       - Client protocols
       - Aliases
Note that I see 'SQL Server 2005 Network Configuration'
rather than that for 2008. When 'Protocols for SQLExpress'
is expanded, there is a TCP/IP setting, but it's disabled and I see an
Access Denied message if I try to enable this.
I also see a TCP/IP setting under Client protocols and successfully enabled this. This uses port 1433 and I configured my firewall to accomodate this port as suggested in the article.
I also followed the other steps in the article, but still don't have remote access to SQL Server 2008 R2. (I can access it from the office.) I'm wondering if this remote access issue is because SQL Server
2008 Network Configuration does not appear in Configuration Manager
and if so, I'm interested in how this might be resolved. (I'm running Windows 7 - 64 bit.)
I'd appreciate any ideas on this. Thanks.

Hello,
Please refer to the following resource.
http://support.microsoft.com/kb/KbView/914277
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How to check the system resources LV is using.

I am currently using LV8.6 to monitor the input on a TCP connection, monitor input from a user and send any input over the connection, and operate on any received data. These are three main functions occuring in parallell and each contained within their own while loop. I am using multiple local variables and many nested case statements. The problem I am running in to is that my VI is using almost 100% of my microprocessor. I have almost completed my code and I will try to reorganize my setup to make it more efficient but my question is if there is a way to monitor the system resources that the VI is using while it is running. Any help on monitoring the system or advice on how to reorganize from my general description would be greatly appreciated.

This usually happens when you have a loop with no wait, because then it tries to run as fast as possible. Usually, TCP reads and event structures have some delay built in, so if I had to guess, I would guess it was the TCP writing loop. The easiest solution is to add a simple wait command to each loop, even of 0 or 1 ms.
As for a more general answer, if you have the professional version of LabVIEW, you should have some profiling tools in the Tools menu. You can also do debugging by placing case structures around pieces of your code and disabling and enabling them while monitoring your CPU usage. When it drops, you can usually assume you've disabled the culprit and investigate further.
Try to take over the world!

How to Create a system in portal server

I am trying to do the tutorial: How to Create a JDBC-based iView for Add/Update/Delete Record.
Its pre-requisite is: A system with an alias JDBC defined on your portal server, and mapped to a database.
Since I am new to VC, I do not know how to create a system, and I also do not know how to access the portal server.
Please help...

Hi Makarand,
Do you have any one who has the access to portal with administrator rights. I am hereby sending you the steps on how to create a system.
To define a system:
1. Create a new system; define all its properties
2. Create a default system alias.
3. Create a user mapping (from the user you use in VC) to the system alias, using the user\password to the backend system.
4. TEST the connection in the portal. If the test succeeds, it should be visible in VC discovery panel.
VC retrieves the systems via the portal.
You have to define the systems or use the defined systems in the portal you are connected.
To define systems in the portal:
System Administration => system configuration => system landscape:
in the PCD: right click on a folder and Add new system.
Then you have to define all the mandatory properties: Connector / Was / User management ...
dont forget to map your portal user with an R3/JDBC user...
thank you very much.

How to enable microsoft system center virtual machine manager Management Pack IP Pool monitoring

How to I enable how to enable IP Pool monitoring in the Microsoft System Center Virtual Machine Manager Management? The IP Pools show up in the IP Address Pool Health dashboard, but the state is "Not Monitored". How to I get these to light up
as monitored?

Hi,
Have you integrated VMM and SCOM?
Hope the links below could be helpful:
Operations Manager Integration and PRO Improvements in SCVMM 2012
http://blogs.technet.com/b/scvmm/archive/2011/04/14/operations-manager-integration-and-pro-improvements-in-scvmm-2012.aspx
Integrating VMM 2012 and OpsMgr 2012
http://blogs.technet.com/b/kevinholman/archive/2012/08/21/integrating-vmm-2012-and-opsmgr-2012.aspx
And please also search for "IP address Pool" under monitors or rules, hope you may find something related there.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

How to enable FIPS on sunone directory server 6.3?

Hi all,
My product needs FIPS certification.
As part of that we will be connecting to sunone directory server and use it as user store.
For that i need the steps to enable FIPS on sunone directory server 6.3.
Has any one done this before?
Please help me in this.
Thanks in advance.
Usha.

To enable the TLS Encryption Cipher
1. Check out the ssl-supported-ciphers property of the server.
$ dsconf set-server-prop -h host -p port ssl-cipher-family:cipher2 View the available SSL ciphers.
$ dsconf get-server-prop -h host -p port ssl-supported-ciphers
ssl-supported-ciphers :     TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
ssl-supported-ciphers :     TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
ssl-supported-ciphers :     TLS_DHE_RSA_WITH_AES_256_CBC_SHA
ssl-supported-ciphers :     TLS_DHE_DSS_WITH_AES_256_CBC_SHA
...Hope this helps,
-Shankar

How to enable IRM licensing in exchange server 2010?

I need to enable that service but I cannot find it in the management console.

Bharat: Having difficulty with getting the perms correct, apparently:
RMS on Server 2008R2, Exchange2010, EXCHServers group has Read/Execute perms on servercertification.asmx and the inheritable checkbox is set.
[PS] C:\Program Files\Microsoft\Exchange Server\V14\Scripts>Set-IRMConfiguration -InternalLicensingEnabled $true
No connection could be made because the target machine actively refused it 192.168.1.46:443 ---> Unable to connect to t
he remote server ---> Failed to get Server Info from
https://rms.baupost.com/_wmcs/certification/server.asmx.
    + CategoryInfo          : InvalidOperation: (:) [Set-IRMConfiguration], Exception
    + FullyQualifiedErrorId : 8E3210B2,Microsoft.Exchange.Management.RightsManagement.SetIRMConfiguration
[PS] C:\Program Files\Microsoft\Exchange Server\V14\Scripts>Test-IRMConfiguration
cmdlet Test-IRMConfiguration at command pipeline position 1
Supply values for the following parameters:
Sender: ************
Results : Checking Exchange Server ...
              - Exchange Server is running in Enterprise.
          Loading IRM configuration ...
              - IRM configuration loaded successfully.
          Retrieving RMS Certification Uri ...
              - RMS Certification Uri:
https://rms.baupost.com/_wmcs/certification.
          Verifying RMS version for
https://rms.baupost.com/_wmcs/certification ...
              - Warning! Failed to verify RMS Version. IRM features require AD RMS on Windows Server 2008 SP2 with the
          Hotfixes specified in Knowledge Base article 973247 (http://support.microsoft.com/kb/973247) or RMS on Window
          s Server 2008 R2.
          Microsoft.Exchange.Security.RightsManagement.RightsManagementException: Failed to get Server Info from https:
          //rms.baupost.com/_wmcs/certification/server.asmx. ---> System.Net.WebException: Unable to connect to the rem
          ote server ---> System.Net.Sockets.SocketException:
No connection could be made because the target machine ac
          tively refused it 192.168.1.46:443
             at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
             at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& soc
          ket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& except
          ion)
             --- End of inner exception stack trace ---
             at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
             at System.Net.HttpWebRequest.GetRequestStream()
             at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
             at Microsoft.Exchange.Security.RightsManagement.SOAP.Server.ServerWS.GetServerInfo(ServerInfoRequest[] req
          uests)
             at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
             --- End of inner exception stack trace ---
             at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
             at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.ValidateRmsVersion(Uri uri, Se
          rviceType serviceType)
             at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.TryGetRacAndClc()

How to enable disk quotas in Lion Server (OS X 10.7.5)?

Hello, all. I am having an impossible time trying to set disk quotas in Lion Sever (OS X 10.7.5) and have searched these (and many other) forums to no avail. Basically, as my network will have mixed PC and Mac users I have set the primary home share folder to SMB. I understand that quotas should be enabled without a hitch under AFP, but this will not suffice for PC clients. I have set quotas in WGM but when I check from a remote connection it shows folder capactiy as the volume's total capacity where the home folder resides.
As the latest version of Server Admin does not have a file share section, how can I do this? I understand it may be possible from the terminal, but having little experience with terminal I would prefer not set it myself (man quotaon was less than helpful).
Thank you in advance for any help.

Not 100% sure, but i think "password change" feature requires Open Directory and SSL encryption for Web.
Has you enabled OD?
Did you try at least a self-signed SSL certificate for Web?

How to enable high availability on SQL Server 2005 with Windows Server 2008 Enterprise R2

Dear Folks,
I would like to ask you about this thing. I'm working for IT department for bank in Myanmar. Our bank have up to 96 branches across all of Myanmar including H.O. We are using Microsoft SQL Server 2005 with Windows Server 2008 for our banking
information system. My main problem is having to backup and restore the database backup files every time the servers in branches goes down for whatever reasons. I want to deploy this feature of high availability and failover cluster using Windows Server 2008
and SQL Server 2005. Our branches have 2 Servers. One is for Primary and other is for Backup. What I want to do is that, I want to change Backup Server to Primary Server whenever the Primary Server goes down for whatever reasons. All the working data and databases
from Primary will immediately replicated into Backup Server along with all the IP information of Primary Server. Please give me step by step guide for this process.

Try below
http://blogs.msdn.com/b/cindygross/archive/2009/10/23/checklist-for-installing-sql-server-2005-as-a-clustered-instance.aspx
I will recommend you to upgrade SQL server to newer version for support as well as flexibility.
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

How to enable only one resource profile outof 3 while disabling user in OIM

Hello,
I have 3 resource profile for AD user with 3 diffrent IT resources.
When i try to disable the user in OIM, then it disables all the resource profiles attached for that user.
I would like NOT to disable one of AD User Resource profile out of 3 .
How can I do that?
Thanks

This is the same post as one made about a week ago.
I would suggest the following:
1. Create an adapter that has an input of the domain, or some other identifying attribute. In this adapter, use logic to return a response of either DISABLE or DO_NOTHING.
2. Create a new Process Task called something like "Disable Resource Determiner". Attach your adapter you just made, and on your response codes, for DISABLE, trigger the disable task, and on DO_NOTHING, then do nothing... Set this adapter to be triggered on disable.
3. On your previous disable task, remove the disable trigger.
Now when your disable is triggered, you have logic to determine which target resource is being used, and then whether or not to disable the resource or do nothing.
-Kevin

How to enable "Starttls" on sun directory server?

I setup directory server 5.2 on windows XP SP2. using InitialLdapContext of JNDI to connect, the program throws a exception in "StartTlsResponse tls =(StartTlsResponse)ctx.extendedOperation(tldsReq);"
the exception message:
javax.naming.CommunicationException: [LDAP: error code 2 - unsupported extended operation]; remaining name ''
     at com.sun.jndi.ldap.LdapCtx.mapErrorCode(Unknown Source)
     at com.sun.jndi.ldap.LdapCtx.processReturnCode(Unknown Source)
     at com.sun.jndi.ldap.LdapCtx.processReturnCode(Unknown Source)
     at com.sun.jndi.ldap.LdapCtx.extendedOperation(Unknown Source)
     at javax.naming.ldap.InitialLdapContext.extendedOperation(Unknown Source)
     at LDAPtlsDemo.main(LDAPtlsDemo.java:28)
so i think that the "Starttls" of server is unabled. I have enabled "SSL", and connected ok by using nitialLdapContext of JNDI.
But I can't find the way to enable "Starttls" via the GUI. Please make some help.

To enable the TLS Encryption Cipher
1. Check out the ssl-supported-ciphers property of the server.
$ dsconf set-server-prop -h host -p port ssl-cipher-family:cipher2 View the available SSL ciphers.
$ dsconf get-server-prop -h host -p port ssl-supported-ciphers
ssl-supported-ciphers :     TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
ssl-supported-ciphers :     TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
ssl-supported-ciphers :     TLS_DHE_RSA_WITH_AES_256_CBC_SHA
ssl-supported-ciphers :     TLS_DHE_DSS_WITH_AES_256_CBC_SHA
...Hope this helps,
-Shankar

How to enable webmail in Mac OS server 10.9

Is there any way to enable or configure webmail in Mac OS server 10.9 but without installing Roundcube?

I know you'd prefer not to install Roundcube, but if you change your mind, this Roundcube installer works perfectly. Saved me a lot of grief and only takes a minute or two to run.
http://topicdesk.com/downloads/roundcube/roundcube-download

How To Enable NAT in Windows 2003 Server to wireless connection mobile or computer

Situation: I am an administrator of company . I’m getting my internet services through a
DSL connection. I’m using Microsoft technologies; hence, my server is Windows 2003 Server. I want to distribute internet(wireless) to all the computers or mobiles through the main server by routing and remote access
Main server is 192.168.1.10
Default gateway(ip of router linksys) is 192.168.1.1
How can i do that and which setting i will use
please help me

Hi,
So you don’t have a NAT device and want to use windows server 2003 RAS role as a NAT?
Windows server 2003 could work as NAT.
How to configure Network Address Translation in Windows Server 2003
http://support.microsoft.com/kb/816581
But I’m a bit curious with your gateway. I guess windows server 2003 connect to internet via your default gateway. If so ICS is another solution:
How To Set Up Internet Connection Sharing in Windows Server 2003
http://support.microsoft.com/kb/324286
At last, buy a wireless router could be a better solution.
Hope this helps.

IMAP 'IDLE' Command for Push e-mail - how to enable in 10.4.8 Server?

Hi all -
I'm getting a brand new Treo tomorrow, and there's software for the Treo which allows it to have true Push e-mail when used with a mail server that supports the IMAP 'IDLE' command. I'm running a G5 Xserve with 10.4.8 Server, fully updated.
So, I've read conflicting things about whether the Cyrus imapd as implemented by Apple in OS X Server 10.4.8 supports this.
Can anyone give me a reasonably definitive answer as to:
a) Does the existing IMAP implementation support 'IDLE' and,
b) If so, does it need any changes (config file or other) to be enabled?
Thanks in advance!

OK - thanks!
a capability does indeed show IDLE, and Chatteremail is receiving pushes perfectly! Thanks for a specific, knowledgable, and right-on-target reply!
For the others interested, Versamail doesn't play this game - it will only handle timed e-mail checks.
Chatteremail (available at http://www.chatteremail.com) seems to be the preferred 'Push' software for Treos, and in the 30 minutes I've had it installed, it seems to work perfectly with my OSX Server IMAP, getting live pushes (it actually seems to take a couple minutes), and correctly synchronized with my desktop account.
I'm now a happy and fully-Push-enabled Treo user!

How to install DI system? bills of service(BOS)

Hi experts,
I want to use bill of service(BOS) for sales quotation. it have to install DI system, how can I install it,? I use ECC 6.0.
Thanks
Lance

Hi Lance,
I think that to use the SD bill of service, you have to activate ECC-DIMP.
You can do that through SPRO -> Activate Business Functions, selecting "Discreet Industries & Mill Prod." in Business Function Set, and then activating "Discrete Industries - Mill Products".
Once this is done, BoS menus and IMG nodes should be added.
Befere activating it, please read carefully notes 874473, 1083533
Cheers,
Pedro

How to enable "Dedicate system resources to server services" option?

Similar Messages

Maybe you are looking for