HOW TO ENTER MAILER PARAMETERS

In standalone oracle WF, while installation i have not entered mailer parameters in workflow configuration assistant. Now i want to do entry for mailer parameters, so should i need to run workflow configuration assistant again?
If yes then whether it will again run all scripts?
is there any other way to enter mailer parameters?
Thank you in advance
Regards,
jakpun

You can use Workflow Manager UI from Enterprise Manager to configure Notification Mailer. You should not run Workflow Config Assistant again.
Thanks

Similar Messages

  • How to Enter Event Parameters in FM SAP_WAPI_CREATE_EVENT_EXTENDED

    Hi,
    I am trying to trigger theEvent 'START_RM_WEBREQ' for an ABAP Class 'CL_HREIC_RM_WORKFLOW' using the above mentioned FM.
    Usually this can be done using SWUE, however I am asked to do it create a custom program that would do the functionality for SWUE.
    Problem is I cannot figure out how do I enter the Parameters of the Event via this FM SAP_WAPI_CREATE_EVENT_EXTENDED.
    The event parameters for the event 'START_RM_WEBREQ' is Object Type and Key. Usually when doing it via SWUE we are prompted with a dynamic screen which asks us to populate the values.
    Please help.
    Thanks,
    Pablo

    Hi,
    Thank you for your response. But I am facing the same problem there. I am not able to populate the value of the Parameter for the event START_RM_WEBREQ.
    The code I had written initially is similar to the one in the link that you have sent:
    TABLES: swotobjid.
    SELECT-OPTIONS: s_notif FOR swotobjid-objkey NO INTERVALS .
    DATA: lv_objtype TYPE sibftypeid,
          lv_event   TYPE sibfevent,
          lv_objkey  TYPE sibfinstid,
          lr_event_parameters TYPE REF TO if_swf_ifs_parameter_container,
          lv_param_name TYPE swfdname,
          lv_value   TYPE char80.
    lv_objtype = 'CL_HREIC_RM_WORKFLOW'.
    lv_event   = 'START_RM_WEBREQ'.
    LOOP AT s_notif.
      lv_objkey  = s_notif-low.
    *Instantiate an empty event container
      CALL METHOD cl_swf_evt_event=>get_event_container
        EXPORTING
          im_objcateg  = cl_swf_evt_event=>mc_objcateg_cl
          im_objtype   = lv_objtype
          im_event     = lv_event
        RECEIVING
          re_reference = lr_event_parameters.
    *Set up the name/value pair to be added to the container
      lv_param_name = 'NOTIFICATION'.
      CONCATENATE 'BUS7051' lv_objkey INTO lv_value SEPARATED BY space.
    *Add the name/value pair to the event conainer
      TRY.
          CALL METHOD lr_event_parameters->set
            EXPORTING
              name  = lv_param_name
              value = lv_value.
        CATCH cx_swf_cnt_cont_access_denied .
        CATCH cx_swf_cnt_elem_access_denied .
        CATCH cx_swf_cnt_elem_not_found .
        CATCH cx_swf_cnt_elem_type_conflict .
        CATCH cx_swf_cnt_unit_type_conflict .
        CATCH cx_swf_cnt_elem_def_invalid .
        CATCH cx_swf_cnt_container .
      ENDTRY.
    Raise the event passing the prepared event container
      TRY.
          CALL METHOD cl_swf_evt_event=>raise
            EXPORTING
              im_objcateg        = cl_swf_evt_event=>mc_objcateg_cl
              im_objtype         = lv_objtype
              im_event           = lv_event
              im_objkey          = lv_objkey
              im_event_container = lr_event_parameters.
        CATCH cx_swf_evt_invalid_objtype .
        CATCH cx_swf_evt_invalid_event .
      ENDTRY.
      COMMIT WORK.
      MESSAGE s736(wz).
    ENDLOOP.

  • How to enter more than 132 characters in a Parameters Field

    Hi Everyone,
    I have a field of type file_table-filename as Parameters in my Selection-screen. The size of the filename is 1024 characters as declared in the structure file_table. But when i am trying to enter the path into this field, its allowing not more than 132 characters....how is it possible to enter more characters? Even in debugging mode the maximum value we can scroll is upto 128/132 characters..if we want more then we should use the Offset option...but how to enter more than 132 chars into this field?
    Best regards,
    rama

    Hai,
    I did the same in my program...i get the filename along with the path into this field...but then there is a chance that the User wants to say edit the filename..here comes the problem.
    Best regards,
    rama

  • How to create optional parameters in discoverer 10.1.2

    I am new to discoverer, Can any one tell me how to create optional parameters in Discoverer desktop edition in 10.1.2
    I looked at the following thread which says optional parameters can be created in 10.1.2 but doesn't tell how tro create it
    How to create optional parameters in Discoverer
    Thanks in Advance

    Hi.
    In the thread you quoted Michael Armstrong-Smith says that optional parameters can be created in Plus but not in Desktop and that's true.
    So your question "how to create optional parameters in Discoverer desktop" is already answered in that thread.
    Assume that it is a typo and you wanted to ask how to create optional parameters in Plus.
    Then the answer is simple: Just uncheck the "Require users to enter a value" checkbox when creating new parameter.
    Regards Jakub

  • OWB 1gr2 process flow - how to pass IN parameters to a procedure

    Hi,
    In OWB 10.1 processflow the IN parameters for the procedure in can be passed in the activity view which appears on selecting the procedure in the processflow. How to enter the IN parameters in case of OWB11gr2. In property Inspector no options are there. Any help is highly appriciated

    Hi,
    select the transformation activity. In the structure window, select the parameter. Then you can set the binding or the value in the property window.
    Sometimes, the property window is not updated when the parameter is selected. Double click the window bar of the property window to maximize it.
    Regards,
    Carsten.

  • How to configure mail service in DRM 11.1.2.3.500

    How to configure mail service in DRM 11.1.2.3.500.
    There is a feature in Workflow Models to Notify users by sending mail.
    Can anyone help me find from where to configure mail service.

    Hi,
    If you open up the Configuration Console on the DRM Server you should be able to navigate to the second tab called "Host Machines".
    From there, select SMTP Server - and enter the details for your SMTP server. You've now configured DRM to send emails... now you just need to add it into your workflows...

  • Bounce due to: 354 Enter mail, end with a single "."

    I'm having trouble sending mail to an email address. The message bounces from the other party's mail server with the following error message:
    Feb 26 11:01:47 mail postfix/smtp[22750]: 732B493DA1: to=<[email protected]>, relay=mgate.lnoca.org[208.108.152.63], delay=11, status=bounced (host mgate.lnoca.org[208.108.152.63] said: 354 Enter mail, end with a single ".". (in reply to end of DATA command))
    Any idea what the trouble might be?

    354 is the code an SMTP server responds to the DATA command. This should not be a rejection command (or comment). It merely indicates how a mail message should be terminated.
    To me it looks like a poorly configured server on the other side. Could also be an interrupted connection.
    Have you tried and contacted them?

  • How to persist URL parameters in OAM portal inserts?

    Hi,
    We have a requirement to redirect the users to different XSLs based on the containers configured in OID (ou=employees,ou=customers). We have configured different style directories (employees and customers) in OAM. For Identity Administration activities we are using another style (adminStyle) used by OAM Identity Administrators.
    We are using OAM portal inserts for navigating from webapplication (integrated with OAM) to OAM modify profile page to change user attributes.
    Also webapplication using different authenitcation scheme in OAM.
    User login into webapplication using login.jsp (form based authentication scheme) and clicks on Modify profile link (URL will be portal insert URL).
    After the user session timeout (Configured in webgate) user is redirected to OAM login page (form based authentication). Once the user enters valid credentials user is redirected to OAM user manager application (only navigation bar with back button is displayed).
    The parameters comp=true, style=employees and program=modify are lost. Hence user not able to see OAM Modify profile page. Again user needs to click on back button (portalid) to get into Modify profile page. How to persist these parameters in the URL?
    Following is the portal insert URL we are using:
    http://<host>:<port>/identity/oblix/apps/userservcenter/bin/userservcenter.cgi?program=modify&uid=UserDN&style=employees&xsl=usc_profile.xsl&comp=true &portalid=webapphome
    Anypointers on this is appreciated.
    Thanks in advance.
    Regards,
    Srikanth
    Edited by: Srikanth_idam on 16-Apr-2010 04:30

    Hi Srikanth,
    That looks like a bug (6158232) that was fixed in version 10.1.4.2 of OAM Access Server (maybe WebGate too). Are you on an earlier version?
    Regards,
    Colin

  • How migrate all mail (boxes and accounts) from 10.6.8 on Mavericks (without Migration Assistant)?

    How migrate all mail (boxes and accounts) from 10.6.8 on Mavericks (without Migration Assistant)? Install the system (10.9.1) on a blank disk, copied the program and set up manually. Mail accounts and folders does not work to install and configure. Migration Assistant does not want to use, as it copies everything, and you only need to e-mail. Read a lot, but nothing works.

    Try reindexing the mailbox. This can take awhile if you have a lot of mail.
    Reindex messages.
    If that doesn't work try deleting MessageUidsAlreadyDownloaded3.
    Quit the application.
    You need to look in your user Library. Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Mail/V2/Mail Data/MessageUidsAlreadyDownloaded3.  Move the file to your desktop.
    Open the application and test. If it works okay, delete the file from the desktop.
    If the application is the same, return thefile to where you got it from, overwriting the newer ones.
    If you prefer to make your User library permanently visible, use the Terminal command found below.
    Show User Library
    You might want to bookmark the command. I had to use it again after I installed 10.8.5. I have also been informed that if you drag the user library to Finder it will remain visible.

  • How to enter Backslash "\" on E71?

    That could be a weird question, but anybody know how to enter the Back Slash on E71 "\"... I need it to enter my corporate mail, but where I can found that? It´s not on QWERTY keyboard, neither on "Car" Key, where is it? Thanks for the help.
    Message Edited by nj7_ on 26-Feb-2009 11:54 PM

    try gong to your messaging > options > settings >  text message > character encoding > make sure its full support.
    Mark me a KUDOS if this has helped...

  • How to stop mail from recovering the same message over and over again to the extent that it has wiped out all start up disk memory?

    How to stop mail from recovering the same message over and over again to the extent that it has wiped out all start up disk memory?

    You need to find and delete (move to the Trash) the offline mail cache (.offline cache.) It's a hidden folder (files and folders with a preceding dot are hidden) inside the Mail folder (inside IMAP) in your user library. Since it's hidden, in order to see it run the following command in Terminal in Applications>Utilities. Hit return/enter once you have pasted in the command.
    defaults write com.apple.finder AppleShowAllFiles -bool true ; killall Finder
    To reverse this and hide all those hidden files and folders again
    defaults write com.apple.finder AppleShowAllFiles -bool false ; killall Finder
    Leave hidden files/folders enabled until you finish emptying the Trash so you know it's gone.

  • How to enter opening balance for GL A/C(Ex. Bank A/C, Cash A/C, Vendor A/C)

    Hi Expert,
    How to enter opening balance for last year to closing balance to this year opening balance explain deeply helpful for me Thanks in advance.
    Example
    All Bank A/C, Cash Book, Vendors, Customers, like that how to enter closing to opening balance.
    With Warm regards,
    Selva

    Dear,
    As per SAP standard there is no need to carry forward the balances as the system will do a virtual carry forward into next year opening without creating any FI documents.
    If your business scenario demands then you can use the transaction code F-02 for posting a carry forward balances, this will not effect any of your balances but only creates a FI document.
    If your R3 version is SAP ECC5 or 6 then use the transaction code FAGLGVTR

  • How to hide dynamic parameters values in the URL with Reports 6i

    Hi,
    I want to know a way of hiding the parameters values when asking for a report through the web.
    Now I'm using the Reports 3.0.5.8 with a Cartridge defined in the Oracle Web Application Server 3.0.1.0.1. When you ask for a report with the parameters DESTYPE = cache and DESFORMAT = pdf, it is fully generated and in the Address or Location box of the browser, you can see http://webserver/cache/report.pdf (where cache is the virtual directory defined in the OWAS in which the .pdfs are cached). So, users cant see the Url used to generate the report.
    Im trying to upgrade this configuration to Reports 6i with Cgi in a web server. I generate reports with no problems. The problem I have is I cant find how to hide the parameters values as before. I mean, when I ask for a report, once its generated I can see http://webserver/cgi-bin/rwcgi60.exe?server=ServerName&report=report.rdf&userid=user/pass@connection&destype=cache&desformat=pdf&P1=value1&P2=value2 in the Location box. It allows user to ask for another report changing the values of the parameters. I use these parameters to execute some query written in the Data Model. For example, imagine that the P1 represents the company id, the user (that is supposed to see only data of its company) can change this id, ask for a new report and see data of another company.
    Ive already tried to use the key mapping option, but its not useful to me because the parameters values are dynamic and its impossible to define different entries in the cgicmd.dat for each possible value. The option of loading the parameter form before running a report is not useful to me either, because there exists specific screens for this purpose.
    Is there any solution?
    Thank you.
    Marma Bonfiglio.

    Hi Rakesh,
      I am using BI  7.0
    The last option I have is 'Hide' for 'Calculate single values as' .
    I have the below options  for 'Calculate single values as'
    1. Normalise  according to Next group  level  Resul.
    2. Normalize according to  Overall Result
    3. Rank number
    4.Olympic Rank Number
    5.Maximum
    6. Minimum
    7.Counter for all detailed values
    8.Counter for all detailed values that are non zero
    9.Moving average
    10.Moving average  That is  Not zero ,null or Error
    11. Hide.
    So could you please tell me where i can find 'suppress result' option for the keyfigure .
    Many thanks

  • How to enter serial number for sale order line  which is in shipped status

    Hi All,
    We have 2 different items which are defined as Serialized at Sale order issue at item definition.
    In one sale order,User has forgot to add serial number to one of the item at Ship confirm stage.
    He has entered serial number correctly to other item.
    Now the both Sale order lines are in Shipped status if we view them through Shipping>transactions.
    I am technical guy and new to OM.Could you please let me know the process to enter the serial number for the item to which user has missed it
    Thanks,
    Satya

    Hi Satya,
    Since the item is already shipped, you cannot enter serial number for this line.
    you have to enter serial numbers after pick confirm only.
    check this note
    How to Enter Serial Numbers in the Shipping Transactions Form [ID 1235403.1]
    As a workaround for the previous lines do RMA and try to receive the goods back to your subinventory.
    For all new transactions follow the above notes.
    Thanks
    -Arif.

  • How to send mail to distribution list ?

    Hi Everybody,
    Pls let me know how to send mail to distributed list???
    Thanks & Regards,
    raju<b></b>

    Hi ,
      Use Function Module 'SO_NEW_DOCUMENT_SEND_API1'.
      U need to pass Distribution list to Receiver and 'C' to receiver type refer the below code for clarification.
    Determine the Distribution List.
            gv_rec_list-receiver = gv_distribution.
            gv_rec_list-rec_type = 'C'.
            APPEND gv_rec_list.
    Check if Distribution List is deleted.
            SELECT SINGLE objnam
                     FROM soid
                     INTO lc_objnam
                     WHERE objnam = gv_rec_list AND
                           dlitp  = lc_dli.
            IF sy-subrc = 0.
              CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
                EXPORTING
                  document_data              = gv_doc_data
                  document_type              = 'RAW'
                  put_in_outbox              = 'X'
                TABLES
                  object_content             = gv_obj_cont
                  receivers                  = gv_rec_list
                EXCEPTIONS
                  too_many_receivers         = 1
                  document_not_sent          = 2
                  document_type_not_exist    = 3
                  operation_no_authorization = 4.
              CASE sy-subrc.
                WHEN '1'.
                 message i001(as) with 'TOO MANY RECEIVERS'.
                  EXIT.
                WHEN '2'.
                 message i001(as) with 'DOCUMENT NOT SENT'.
                  EXIT.
                WHEN '3'.
                 message i001(as) with 'DOCUMENT TYPE DOES NOT EXIST'.
                  EXIT.
                WHEN '4'.
                 message i001(as) with 'OPERATION NO AUTHORIZATION'.
                  EXIT.
              ENDCASE.
              Hope this might have helped you.
    Thanks,
    Prashanth

Maybe you are looking for