How to exclude "Blocked for Purchase" error message in PO creation for particular Order Type

In Article master some times we used to set Site-Specific Article Status = '01'. (MARC-MMSTA)
01
Blocked for Purchase
02
Blocked for Purchase/Sale
My requirement is that when Creating PO in ME21N for a particular Order Type (Purchasing). This check need to be removed.
Now if we try creating the PO we will be getting the below error message.
Status "Blocked for Purchase" of article XXXXXX does not allow external procurement.
Is there any exit or BADI where i can put logic to remove this check.

Hi ,
You can use BADI ME_PROCESS_PO_CUST or customer exist EXIT_SAPMM06E_013
Regards,
Pravin

Similar Messages

  • 'Check for Purchases' Error message

    I click on it anytime of the day, just says the same things over and over again. "Unable to check at this time, network timed out." The Network is fine on my end, I'm able to go on the internet and I even cut it off and restarted the network and the machine.
    It happened with 7.0 and 7.5. I just need the lost music that they stuck in my queu!!
    P.s. its been happening for at least a month. I can download music fine, but my season passes won't download!

    I have exactly the same problem with the same Keith Urban album and contacted Apple support who is investigating. I'll keep you posted once resolved.

  • Block Production Order Creation for Particular Order Type

    Hi Experts,
    I want to disable the production order creation for a particular order type XX01 however there are some existing orders for this order type which should be processed further.
    In other words my objective is to -
    1. Block new Production order XX01 creation -
    2. Processing of order type XX01 should be possible.
    Is there standard setting available to achieve this or user exist is the only option..
    Regards,

    Hi
    You can use the user exit PPCO0006 and its function mdoule EXIT_SAPLCOZF_003 to archive that. That function module is called when the user click enter after inputting the material/plant/order type in CO01 then you just need to check the imported value CAUFVD_IMP-AUART which contains the inputted order type then rasise an error message to tell user that the order type cannot be used due to certain reason. The source code need to be written there is very simple.
    Regards.
    Leon.

  • Mac OS X 10.6.8, receiving error message "Failed to check for updates. The operation couldn't be completed. Operation not permitted." How to fix?

    When I try to update my software, I'm receiving the error message "Failed to check for updates. The operation couldn't be completed. Operation not permitted."
    I'm using Safari 4.0.3. Yes, I know this is an old version of Safari - I can't update it, or any other software on my MacBook. Should I just wait for the Lion OS, or is there any kind of fix a non-technical Mac user like me can attempt without screwing up her laptop?
    I've tried clearing my cache and resetting Safari already - doesn't help. I've also tried to update after disabling my (Norton) antivirus software, thinking that might be interfering. None of these help.
    I don't know if it's a related problem, but also I can't download .pdf files from the internet, although I used to be able to.

    You should use the NortonAV uninstaller to uninstall it. Disabling the dreadful thing in the past hasn't always been sufficient for it to cease creating system havoc. The Mac NortonAV version has a long and well-earned reputation for doing truly seriously nasty things to OS X. Shame on Comcast for inflicting NortonAV on its Mac customers. It's not a matter of if NortonAV will mess up OS X but when and how badly. I can't help but wondering if some setting in your Norton AV has decided that NortonAV, rather than you, will be making executive decisions about what you are allowed to install on your computer and is keeping that fact a secret.
    After you are done uninstalling Norton use the finder to search for any Norton files that the uninstaller might have missed. Add the option to search for invisible files.
    After you have removed all the Norton bits and pieces restart in safe mode by holding down the shift key right after the startup chime. Keep holding down the shift key until you see the Apple logo and spinning gear. Safe mode does some maintenance tasks which means a much longer than normal startup time. Use Disk Utility to repair permission
    If your Mac works normally in safe mode restart. If things still aren't fixed you might want to give another shot at reinstalling Snow Leopard from the install DVD and applying the Mac OS X 10.6.8 Update Combo before taking your Mac to the Apple Store.
    If you feel the need to run AV software on your Mac use ClamXav in manual mode. It's donationware and doesn't seem to cause the litany of weird problems that are associated with other AV software.

  • How to select a locale for parser error messages

    Does anybody know how I can select a locale for parser error messages? I found org.xml.sax.Parser.setLocale, but that's for SAX1 and deprecated.
    I have a textarea in the user interface where a user can edit XML and, of course, I'd like the parsing error messages to appear in the selected locale...
    Any help appreciated.
    - Michael

    Yes, but doing this you changed the locale for the JVM! I know that. My intention was to see whether the parsers even had error messages in languages other than English. If they didn't then there would be no point in proceeding. But they do, so maybe there is some point.
    However you don't get to specify the locale for exceptions thrown by other Java classes, so I wouldn't be surprised to find you don't get to specify the locale for exceptions thrown by XML parsers. I'm not saying there is no way to do that, only that I would not be surprised if there were no way.

  • After downloading Yosemite iPhoto is blocked.  Update error message reads: Update not available for this ID either because it was bought by a different user...

    After downloading Yosemite iPhoto is blocked.  Directed to update.  Update error message: Update not available for this ID either because it was bought by a different user.....  This could be because my iPhone is now linked to the Mac and it is recognising that ID.

    My previous post should read...Could this be because my iPhone is now linked to the Mac and is recognising that ID?

  • How to End the Error message: "enter the password for the exchange account"

    i completed configure Exchange Account on my iPhone, but still show the error message:  "enter the password for the exchange account"

    make sure you don't have 2 step verification in gmail.
    otherwise you need to follow
    Signing in using application-specific passwords
    The codes that you’ll get with 2-step verification don’t work with all applications. There are a few applications that use information from your Google Account (like the Gmail application on your phone, or Outlook) that require another type of code. These are called application-specific passwords.
    Some devices and applications that use these special passwords include:
    POP and IMAP email clients such as Outlook, Mail and Thunderbird
    Gmail and Google Calendar on smartphones
    ActiveSync for Windows Mobile and iPhone
    YouTube Mobile on Apple devices
    Cloud Print
    Installed chat clients such as Google Talk and Adium
    3D Warehouse, Sketchup, and installed applications
    AdWords Editor
    Sync for Google Chrome
    Gmail Notifier
    How to generate an application-specific password
      Unlike a verification code that you receive from your phone or through Google Authenticator, application-specific passwords are generated. You don’t have to memorize them, ever - you simply generate a new one each time you need to sign into a particular application. Follow the steps below to generate your application-specific password: 
    Visit the Authorizing applications & sites page (pictured below) under your Google Account settings.
    Under the Application-specific passwords section, enter a descriptive name for the application (label 1) you want to authorize, such as "AdWords Editor – Desktop," then click “Generate application-specific password" (label 2).
    You'll then see the application-specific password you just created (3). You'll also see the name you wrote in for the device (4) and a link to Revoke (5) -- or cancel -- the code.
    Once you click Done, you’ll never see that application-specific code again. But don't panic: You can generate a new one whenever you’re prompted for an application-specific password by a non-browser device or application -- even a device or application you’ve authorized before.
    Using application-specific passwords
    When prompted for a password when you sign in to a non-browser application or device that accesses your Google Account:
    Enter your username.
    Enter your application-specific password in the password field.
    If your application has an option to remember your application-specific password or stay signed in, you can select that option so you won’t have to generate and enter a new application-specific password each time you access your account from this application or device.

  • I have 10.6.8 with Safari 5.1.10 and am getting a "blocked plug-in" error message, how can I rectify this situation?

    I have OS X 10.6.8 with Safari 5.1.10 and am getting a "blocked plug-in" error message. I have already gone into the Safari/preferences/securtiy and the allow all plug-ins has been checked. What can I do to rectify this situation?

    Niel, I clicked on the message and tried to download an updated flash player but it would not let me do it! The same error message - blocked plu-in - came up again when I went to step 3 in the download process. My iMac ia an older model 4,1 with power PC could this be causing the problem?

  • HT1923 When attempting a reinstall of iTunes, I cant delete the file C\Program Files\Common Files\Apple\Internet Services\Shellstream.resources due to same error message as described above for iPod file; however i can't find it anywhere in the Task Manage

    When attempting a reinstall of iTunes, I cant delete the file C\Program Files\Common Files\Apple\Internet Services\Shellstream.resources due to same error message as described above for iPod file; however i can't find it anywhere in the Task Manager

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • I was able  to print with my acrobat before, but I can no longer do it.  the error message says "adobe creation cannot continue because acrobat is not activated"  How do I activate it?

    i was able  to print with my acrobat before, but I can no longer do it.  the error message says "adobe creation cannot continue because acrobat is not activated"  How do I activate it?

    I have the exact same issue. I can print one document and then I get the error mentionned above ("adobe creation cannot continue because acrobat is not activated"). Then I need to reboot in order to be able to print a new document.
    I have suite and went to Photoshop as suggested, but this program is already activated. I tried to launch Acrobat Pro but it won't.
    I'm using the Design and Web Premium CS6 Suite on Windows Vista.
    Thank you so much for your help.

  • Getting error message "cannot prepare project for publishing (-50) -- and it wont publish my project. What's up?!

    getting error message "cannot prepare project for publishing (-50)" and, subsequently, it won't publish the bloody thing. I have publsihed many videos previous to this one so I have no idea waht is going on.
    So, my question is -- WHAT IS GOING ON?!!

    Hi
    See if this might help
    Error -50
    Error -50   paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Yours Bengt W

  • Please help. Error message "Document is licensed for a different user account"

    I purchased a ebook on B and N and saved to my PC. I added this ebook to the library in Adobe Digital Editions and it is displayes. Whena I click on it to open I receive the error message"Document is licensed for a different user account". Please let me know what to do?
    Thank you.

    Hi,
    In order to fix this you need to contact B&N support and ask them to reset download link of the books and then download same book once again.
    Regards
    Rizwan.

  • Itunes error message, account disabled not for security reasons

    Just received an itunes error message, account disable not for security reasons. How do I enable the itunes account? This is a valid account that has been used for during the last six months.

    All you can do is contact iTunes since resetting the PW did not work.
    Apple - Support - iTunes - Contact Us

  • I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC.  I'm registered and my itunes account/ appleID are all correct and working.

    I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC.  I'm registered and my itunes account/ appleID are all correct and working.

    The ""not recognized for on-line use". error is associated with the Gracenote service that iTunes uses to look up and retrieve metadata for CDs.  Some users have reported that this error occurs when trying to import from CD, subsequent to upgrading to version 12.  A number of slightly different solutions have been reported (though all of a similar nature).
    Try walking through the following steps - before starting you may have to enable hidden files and folders to be viewed - in Windows 7 / Windows Explorer select Organize > Folder and search options, then on the View tab make sure that Show hidden files, folders and drives is selected.  Without this you won't see the AppData folder in C:\Users\username\
    Exit iTunes
    In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
    Delete the following files:
    CD Info.cidb
    com.apple.iTunes.Gracenote.plist
    Restart iTunes
    Insert a CD and see if details are now correctly retrieved from Gracenote
    If this doesn't work:
    In iTunes, select Edit > Preferences and make a note (or take a screenshot) of your preferences settings in all relevant tabs
    Exit iTunes
    In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
    Delete the following file:iTunesPrefs.xml
    Restart iTunes
    Insert a CD and see if details are now correctly retrieved from Gracenote
    If this second procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1.
    If this one didn't work:
    Exit iTunes
    Check the following folders:
    C:\Users\username\AppData\Local\Apple Computer\iTunes
    C:\Users\username\AppData\LocalLow\Apple Computer\iTunes
    Delete any copies of the following files:
    CD Info.cidb
    com.apple.iTunes.Gracenote.plist
    iTunesPrefs.xml
    Restart iTunes
    Insert a CD and see if details are now correctly retrieved from Gracenote
    Again, if this procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1 of the second procedure. If you're still not able to retrieve CD info:
    Exit iTunes
    In Windows, select Start > Control Panel > Programs and Features.  Find the entry for iTunes, right-click and select Repair.
    When this process has finished, restart iTunes
    Insert a CD and see if details are now correctly retrieved from Gracenote
    If none of these have worked (and almost everything I've seen suggests you should be OK by this point), you may have an issue with the installation and configuration of iTunes itself.  If you have got this far, see turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for advice on how to remove and replace of all components of iTunes.

  • Supplier not intended for purchasing organization message

    Hello All,
    We are implementing SAP SRM 7.03 with ECC 6.0.
    During SC creation stage we are getting a error message, 'Supplier not intended for purchasing organization'
    We are with one single purchasing organization, in the supplier search help the purchasing organization field is blank.
    In table BBPM_BUT_FRG0061 the purchasing organization is available for all the replicated suppliers. In the org structure maintenance the Purchasing Organization and Purchasing Group functions are responsibility is defined properly.
    The observation is in the basic data of the shopping cart, the purchasing organization and purchasing group fields are missing.
    Kindly share pointers in resolving this issue.
    Rgds,
    Madhan

    Dear Madhan,
    I have faced similar problem recently, got the same error, however it was configured properly.
    Resolved it with setting the message to warning:
    Use T.code sm30 - table BBPV_PDMSG check oblect BBP_PD 018 it should be: EWI / E
    Than add  new entry to table BBPV_PDMSG_CUS for object BUS2000113 it should be
    : Message class BBP_PD No 018 type W. Save your changes.
    Or you can do the same with SPRO - SRM Server - Cross-application basic settings - Message Control - Influence message control  for object BUS2000113.
    Hope it helps!
    Sincerely yours,
    Sergey Eropkin

Maybe you are looking for

  • What is the best way to create a sociogram?

    I need to draw up a sociogram of who's freinds with who in a class I work in. I've got the information I just need to know how to display it. Whats the best program to use?

  • Interactive PDF / Email marketing

    I have a 20 page newsletter that I'm sending out through an eblast. I have several paragraphs in the eblast summarizing exciting points in the newsletter. What I'm trying to do is where it says "read more on page 14" in the eblast, have a link that t

  • PDF Export not working

    Hi, I'm using the CS6 (8.0.2), the script as below for export pdf. While using this script, no changes the below highlighted options (in bold) and the result is RGB, but my document is CMYK and I want same. Actual issue: 1. Once cleared the preferenc

  • DB analysis for performance

    I have been assigned DB analysis for performance/problem detection. What things i should look in statspack report , & what other things i should check for over all analysis.

  • Preloader Text (numbers) not showing

    Hi, I have a preloader and I've noticed that the percent_tf.text doesn't always show the percent loaded.  Any ideas? Thanks, Chris