How to execute a job immediately

Dear all,
    As the code shows, i wander if the job ZSDI00010 will execute immediately. if not, need i change IMMEDIATELY ' ' to IMMEDIATE 'X'?
CALL FUNCTION 'JOB_OPEN'
       EXPORTING
           JOBNAME          = 'ZSDI0004'
       IMPORTING
           JOBCOUNT         = JOBCOUNT
       EXCEPTIONS
            CANT_CREATE_JOB = 1
            INVALID_JOB_DATA = 2
            JOBNAME_MISSING = 3
            OTHERS           = 4.
SUBMIT ZSDI0010 WITH P_FILE = P_UXFILE
                  VIA JOB 'ZSDI0004' NUMBER JOBCOUNT
                  TO SAP-SPOOL
                  COVER TEXT 'Upload program Pc forecast tool'
                  WITHOUT SPOOL DYNPRO IMMEDIATELY ' '
                  AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
       EXPORTING
            JOBCOUNT             = JOBCOUNT
            JOBNAME              = 'ZSDI0004'
            SDLSTRTDT            = SY-DATUM
            SDLSTRTTM            = SY-UZEIT
       EXCEPTIONS
            CANT_START_IMMEDIATE = 1
            INVALID_STARTDATE    = 2
            JOBNAME_MISSING      = 3
            JOB_CLOSE_FAILED     = 4
            JOB_NOSTEPS          = 5
            JOB_NOTEX            = 6
            LOCK_FAILED          = 7
            OTHERS               = 8.

Hi
Yes u do...in JOB_CLOSE fm
CALL FUNCTION 'JOB_CLOSE'
       EXPORTING
            JOBCOUNT             = <JOBCOUNT>
            JOBNAME              = <JOBNAME>
            STRTIMMED            = 'X' " start immediatly
Max

Similar Messages

How to execute the job from script ??

How to execute the job from script ?? i have 2 jobs A AND B . I want to execute job B from job A'S Script ?? how can i ??

Hi Kishore,
Please refer the below link for BODS Job execution using Script
Executing a job by another job in BODS 4.1 using simple script
http://scn.sap.com/community/data-services/blog/2013/12/04/executing-a-job-by-another-job-in-bods-41-using-simple-script
Steps for executing BODS job from Unix Script with user defined global parameters
http://scn.sap.com/community/data-services/blog/2013/09/02/steps-for-executing-bods-job-from-unix-script-with-user-defined-global-parameters
Executing a job using batch file
http://scn.sap.com/thread/3503338
How to add a schedule for job2 with a condition after job 1 is finished
http://scn.sap.com/message/14523514#14523514
Scheduling BODS Jobs Sequentially and Conditionally
http://scn.sap.com/docs/DOC-34648
Thanks,
Daya

How to start the job immediately ?

Hello,
In program we submit another program in background job using JOB_OPEN. SUBMIT program .... and JOB_CLOSE. But this job will be schedule, Now we need that it will be started immediately after we submit it, How can we do that ?
Thanks

HI Tinh
Look at the parameters of fct module 'JOB_CLOSE' you will find start immediately parameter (STRTIMMED). If you can paste youe code, perhaps it is more easier to help you
Dean Q.
Regards

Execute a background job immediately

Hi everyone,
If a user wants to execute a background job immediately but there is no Background work process available. How u will do?
Regards
Ganesh

Yes, as JIM said, the job will queue until a BTC become available. You can also increase the number of batch processes changing the value of rdisp/wp_no_btc = <Number of processes desired>, or use Operation modes to increase the ammount of batch processes during a specific period of time.
Hope this help!
Juan
Please reward points if helpful

How to re-execute a job which has failed

hi everyone,
i am executing a job ....it executed for few minutes and hav been able to load few records in the final table(target)....some exception is thrown up and job failed after that....i want to re-execute the job with only the records that are not processed...how to identify which records are processed?
is there any process to do so in BO DI?

Hi Suneel
You can use several methods to ensure that you do not insert duplicate rows:
u2022 Design the data flow to completely replace the target table during each
execution
This technique can be optimal when the changes to the target table are
numerous compared to the size of the table. You can use tuning
techniques such as bulk loading options to improve overall performance.
u2022 Set the auto correct load option for the target table
The auto correct load option checks the target table for existing rows
before adding new rows to the table. Using the auto correct load option,
however, can needlessly slow jobs executed in non-recovery mode.
Consider this technique when the target table is large and the changes
to the table are relatively few.
u2022 Include a SQL command to execute before the table loads
Preload SQL commands can remove partial database updates that occur
during incomplete execution of a step in a job. Typically, the preload SQL
command deletes rows based on a variable that is set before the partial
insertion step began.

How to execute scat in a job background ?

Hi,
how to execute scat in a job background?
Regards,
FK

Hello Farid,
In SCAT give test case name then execute it. Then in next screen select the processing mode as background with the other details. This processing mode will trigger the tool execution in background mode.
Regards.
Ruchit.

How to execute a mapping or workflow in a job?

hi all:
I want to write a procedure use pl/sql,
and how to execute mapping or workflow in procedure ?
then I write a job use script ,the job schedule execute
procedure.
please give me a sample.

Hi,
You can write a procedure something on these lines -
CREATE OR REPLACE PROCEDURE Test_Proc(p_task_name IN VARCHAR2, p_task_type IN VARCHAR2, p_loc IN VARCHAR2 ) AS
lv_rt_code NUMBER(1) DEFAULT 0;
lv_repo VARCHAR2(64) DEFAULT NULL;
lv_loc VARCHAR2(64) DEFAULT 'LOC_EDW_PROCESS_FLOWS';
lv_task_type VARCHAR2(64) DEFAULT 'PROCESS';
lv_task_name VARCHAR2(64) DEFAULT 'ETL_FIXED_RATE';
lv_sys_par VARCHAR2(64) DEFAULT ',';
lv_cust_par VARCHAR2(64) DEFAULT ',';
lv_oem NUMBER(1) DEFAULT 0;
lv_fnc_call VARCHAR2(4000) DEFAULT NULL;
BEGIN
     IF ( p_task_name IS NOT NULL AND p_task_type IS NOT NULL AND p_loc IS NOT NULL) THEN
     lv_task_name := p_task_name;
     lv_task_type := p_task_type;
     lv_loc := p_loc;
     END IF;
     SELECT Wb_Rt_Platform_Repository INTO lv_repo FROM dual;
lv_fnc_call := 'BEGIN '
||':lv_rt_code'
|| ' := '
|| lv_repo
||'.fnc_exec_owb_process(p_repos_owner => :lv_repo'
||', p_location_name => :lv_loc'
||', p_task_type => :lv_task_type'
||', p_task_name => :lv_task_name'
||', p_system_params => :lv_sys_par'
||', p_custom_params => :lv_cust_par'
||', p_oem_friendly => :lv_oem'
          ||'); END;'
--dbms_output.put_line(lv_fnc_call);
EXECUTE IMMEDIATE lv_fnc_call USING OUT lv_rt_code, IN lv_repo, lv_loc, lv_task_type, lv_task_name, lv_sys_par, lv_cust_par, lv_oem;
DBMS_OUTPUT.PUT_LINE('RETURN CODE IS '|| lv_rt_code);
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line(SUBSTR(SQLERRM,1,255) );
END;
and use DBMS_JOB to schedule the above.
HOpe this helps.
Thanks
Mahesh

How to execute a active Job in T-code SM37.

Hi
How to execute a active Job in T-code SM37.
Pls help

hi,
In SM37 give the job name or user name. then in job status check only the active jobs then u can execute the job..
Subhash

How to do background job on dtp

how to do background job on dtp

hi,
whenever you run the DTP in Process chain it will be running in background.
hence in BI it is recommended to use PC.
if you execute it will be running immediately.
Ramesh

How to create a job card and how to add waranty card in sales order

I have one scenario for CS.the scenario is realted to automotive industry. Basically its a trading industry of HCV,MCV,LCV apart from that they will do servicing also. First the customer comes for a service.he is having free services. he will have waranty for spare parts of the vehicle. once he comes for servicing first the executive will take complains from the customer after that a Job card will be issued to the customer. there his chasis no ,engine no and registration no will be there. once enter the chasis no entire customer details has to come. how many free services he is having for how many kilo meters.then job card will go to the spare parts dept.that dept will issue the spare parts.then they will invoice the customer. he will pay the payment.and finally the gate pass will be given to the customer to deliver the vehicle.
painful area is how to create a job card and how to add waranty in sales order.
Regards,
Venkat

Hi,
Have u resolved it then Please let me know !!! It is a very interesting problem and owuld like to know the solution...
Regards
Krishna

How to schedule a job which needs to run evry day 1(AM) o clk?

begin
DBMS_SCHEDULER.create_job (
job_name=> 'BJAZPROPMAINTAIN',
job_type=> 'PLSQL_BLOCK',
job_action=> schemaname.schedule_procedure;',
start_date=> '02-aug-08 01:00:00 PM',
repeat_interval=> 'FREQ=DAILY; BYHOUR=01',
enabled =>TRUE,
auto_drop=>FALSE);
end;
Hi all,
i want to schedule a job which needs to be run every day one o clock early morning i haven't set the job_scheduler before this. by searching thru net and prev scheduler coding i have written the above code here for running evry day early morning 1 o clock i m little bit of confused in the time
repeat_interval=>'FREQ=DAILY;BYHOUR=01'; whether is is correct one or wrong?
and also there are some other job is scheduled in the same time . will it create any problem of executing at the sametime or we need to change the timing of 1:15 like that?
please advise me..

Thanks a lot so it will be executing every night 1 o clock am i right?
It should.But I shall say that schedule it and than only we can be sure about it.About the timing part, its correct syntatically.
i saw that job_priority column in dba_scheduler_jobs table but dont know what it does?
and also how can fetch this job scheduler sid,serial# i checked v$session but how to correlate this ..
please explain me
In schedulerjobs,there is a column ,client_id.You can map it to the sid from the V$session.I don't have a box running Oracle at the moment so I wont be test it for you.Do it and post feedback.
what will happen if more than one job is scheduled in the sametime
i think for this only we set the priority on the two which one needs to be first exec(depends on the high priority)
let me know about this.
Jobs are prioritized by two parts,within the class they are a part of and individualy.If you have two jobs in the same class than they can be make run with a different priority with the priority clause set within them.This has a number which start from 1 meaning highest priority.So if there are two jobs scheduled for the same time,you need to check which job class they fall into. If they are in the same class than you have to change the priority of them.
I suggest you read the books,they cover all these topics in much more detail.
Also there is a dedicated forum about Scheduler.In future for Scheduler regarded questions, you can visit there.
Scheduler
Aman....

How to execute an SSIS package on a scheduled basis from remote server and pass in input files

I have an application server and a db server. My db server has all things SQL Server stored on it (DBMS, SSRS, SSIS, etc.) I have several nightly batch process SSIS packages (dtsx files currently) that will pickup an input file and import them
into the database. I would like to execute all batch processes from my application server as I have quite a few other ones as well that do other stuff outside of SQL Server via powershell. My question is how to do this? Is there away to execute
them remotely via DTexec.exe, should I set them up as Agent jobs and somehow pass in the file names\location (how?), create and SSIS catalog, etc.?
I need to easily be able to see if the packages execute successfully or not and if not capture the detailed information of why they failed from the remote server so I can use that to drive my process flow logic in the batch processes.

Hi Jason,
According to your description, you want to execute a package on a schedule and receive notification when package ends with error in the job.
After testing the issue in my environment, we can directly add the package in a step of a job, then add a schedule and set the Alert and Notification property in the job to achieve your requirement. For more details, please see:
Create a Database Mail in the SSMS.
Right-click the SQL Server Agent services to Enable mail profile, then select the appropriate Mail profile.
Under the Operators folder, create an operator with the correct E-mail name.
Right-click the Jobs folder to add a new job.
In the Steps pane, New a step with SQL Server Integration Services Package Type to run the package.
In the Schedules pane, New a schedule for the job.
In the Alerts pane, New an alert with SQL Server event alert, then enable Notify operators option with an operator in the Response pane.
In the Notifications pane, enable Email option with same operator and When the job fails selection.
Then when the package fails, the job would be failed and we can receive the error message in the mailbox.
Besides, please make sure the account that execute the job has correct permissions for the file, for the folder that contains the file, and for the database.
References:
Configure Database Mail – Send Email From SQL Database
How to setup SQL Server alerts and email operator notifications
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Error while executing the Job:Cannot assign NULL to host variable 1

Hello!
I have the following issue:
Error while executing the Job:Cannot assign NULL to host variable 1. setNull() can only be used if the corresponding column is nullable. The statement is "INSERT INTO "VIRSA_... (see log for details)
Note 1362138 - Rule generation - null pointer exception virsa_cc_rtmap doesn't me. After uploading files of ZCC_DOWNLOAD_SAPOBJ and ZCC_DOWNLOAD_DESC I got the same problem during job running...
How can I find out where is the problem?

Hi
That looks like your fields are disabled but they could still be causing the problem edited ( nah - talking rubbish as you've put dummy " " in there) edited - the 'null' error caused many background jobs to fail but, once we had the evidence to show the space (somebody had pressed enter instead of delete/backspace to clear the entry) it stopped the problem - just a bit of learning on the job which we all go through for the GRC chaps in KL.
A " " would be valid but a (I know you can't see it but it's there wouldn't be )
edited.When you did an edit/replace did it say it had replaced anything please?edited
The word doc option does sound good!
Cheers
David
Edited by: David Berry on Nov 4, 2010 7:33 PM

How to restrict the job start conditions (only "Immediate" type) ?

Hi,
We allow our users to schedule and execute in background mode transactions (example IP19, IW38). We gave them for that authorizations (object S_BTCH_JOB with LIST, PROT, RELE and SHOW - objetct S_PROGRAM with BTCSUBMIT).
We would like that users can schedule and execute their jobs only with the u201CImmediateu201D job start condition (in the Start Time screen for the type of start condition : Immediate, Date/Time, After job, After event, or At operation mode).
Another solution: prohibit the scheduling and the execution background job in a certain time interval ...
How can restrict the job start conditions ?
Thank you.
Patrice.

Hi Jan,
Yes, sa38 makes it possible indeed to execute in background into immediate mode a job but
the user have to know the name of the program to be carried out ...
The user knows only the name of these transactions trade. For example, IW38.
In the menu of this transaction, SAP gives the possibility to execute in background :
Program --> Execute in Background --> display of Start Time screen for the type of start condition :
Immediate, Date/Time, After job, After event, or At operation mode).
It is at this time there that we want that the user can only choose the "immediate" mode.
We must thus prohibit the other choices (Date/Time, After job, After event, or At operation mode) ... and
and we don't know how to restrict these other options in this screen "Start Time screen for the type of start condition".
Thank you.
By.

How to execute the procedure in sap b1

Hai to all,
I done a procedure in sql server .but i don't know how to execute that procedure in sap b1?
can anyone help me immediately.
Regards,
Ramya.S

Dear Ramya.S,
You could execute the store procedure by using Recordset object in SDK DI code. It is like:
Dim myRecordSet As SAPbobsCOM.Recordset
myRecordSet =
SBO_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecord
set)
myRecordSet.Command.Name = "TestStoredProcedure"
myRecordSet.Command.Parameters.Item("@ItemLike").Value = "IT%"
myRecordSet.Command.Parameters.Item(2).Value = "C0001"
myRecordSet.Command.Execute()

How to execute a job immediately

Similar Messages

Maybe you are looking for