How to exit from LDOM?

Hello,
I am having Solaris 11 as host OS on Sparc T1 server.
LDOM's of Solaris 10 are installed by Oracle partner.
I am not able to exit from any of the LDOM's by using shift & *~* & *.* key combination.
Any help?

i dont nkow

Similar Messages

How to exit from a WebDynpro ABAP application and open another url

Hi Friends,
How to exit from a WebDynpro ABAP application and open another url like (www.yahoo.com) in the same window of the WD4 application on click of a Button?
Regards,
Xavier

Hi,
First of all you should create outbound plug in the window you are trying to exit with plufg type "Exit"
Then create method handler in the view with this code
        data lo_view_cntr type ref to if_wd_view_controller.
        data lo_win_cntr type ref to if_wd_window_controller.
        data: l_parameter_list type wdr_event_parameter_list,
              l_parameter type wdr_event_parameter,
              l_val type ref to data,
              l_val_url type REF TO data.
        field-symbols: <fs> type any,
                       <fs_url> type any.
        lo_view_cntr = wd_this->wd_get_api( ).
        lo_win_cntr = lo_view_cntr->get_embedding_window_ctlr( ).
        CREATE DATA l_val type c.
        CREATE DATA l_val_url type string.
        ASSIGN l_val->* to <fs>.
        ASSIGN l_val_url->* to <fs_url>.
        <fs> = 'X'.
        <fs_url> = 'http://your-link.com'.
        l_parameter-name = 'URL'.
        l_parameter-value = l_val_url.
        INSERT l_parameter INTO TABLE l_parameter_list.
        lo_win_cntr->if_wd_view_controller~fire_plug( EXPORTING plug_name = 'EXIT_PLUG'
                                                                parameters = l_parameter_list ).
      You can easily change this logic to exit application instead of redirecting to the site
       just changing to
       l_parameter-name = 'CLOSE_WINDOW'.

How to exit from a loop on 2 different conditions

Hello Experts
I’m trying to write a procedure in which I’m taking PROVINCE as an input parameter. All the provinces are stores in a table. I’m using a cursor and rowtype variable to check the province. After I finds province I displays province and its code. Everything works fine expect when I don’t find the province. I’m not sure how to exit from loop if I don’t find the province. I already uses exit when condition. I was expecting else condition should work and should exit from the loop but it doesn’t. Can please somebody show me how to exit if I don’t find province in the table through cursor.
Here is my code
set serveroutput on
variable G_TAX varchar2(10)
CREATE OR REPLACE PROCEDURE p_create(i_state VARCHAR2)is
CURSOR cur_bb_tax is
select * from bb_tax;
bb_tax_details bb_tax%rowtype;
begin
if not cur_bb_tax%isopen then
open cur_bb_tax;
end if;
loop
fetch cur_bb_tax into bb_tax_details;
if (bb_tax_details.state = i_state) then
dbms_output.put_line(bb_tax_details.state || bb_tax_details.idstate);
end if;
exit when bb_tax_details.state = i_state;
end loop;
close cur_bb_tax;
exception
when others then
dbms_output.put_line(SQLERRM);
end;
Thanks in advance

Hello,
Why don't you use dbms_output.Put_line and print output to find why logic is not able to execute? Maybe upper case/lower case/whitespace. *Also put your code between \ to preserve formatting*.
Regards

How to exit from the button test in diagnostic mode

Hi,
I am having some trouble with my ipod 7th gen.
First my lightning cable wont be recognize. show the error Accesory incompatible.
I try to solve the problem cleaning the golden pins in the cable and in the ipod. Don't work
I enter in diagnostic mode in my ipod and I get stucked in the button counter test..
In the screen appear a mesage 'Please reset the unit to end'. I don't know how to reset the unit
I press any button and only increase the counter for every button.
First how acan exit from the button counter test and how can fix the issue with the lightning cable

Your problem is that you are trapped inside an event case. It is not a good idea to run extended code inside event cases, else the event structure cannot service other events.
Why don't you use the outer loop for everything? Now things don't step on each others toes. What good is an event structure if it cannot react at all times???
Message Edited by altenbach on 07-25-2008 12:26 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
event_problemMOD.vi ‏17 KB

How to exit from the loop

loop at itab.
if <CONDITION>
<EXIT LOOP>
endif
endloop.
this ths condition , pz tel how to exit from loop

Hi
Loop
statements
EXIT
Endloop.
Will comes out of the loop.
Regards,
Sreeram Kumar.Madisetty

How to exit from whileloop with Timing Delay

Hello;
How to exit from forwhile with timing wait (10s) before finish 10s by stop botem;
exemple ; first impulsion to start a while loop with 10 s wait ,before finsh a 10s second impulsion to stop the while loop; in labview 2010
best regrds
Forza Juventus

Show us the code you currently have. Just repeating your specification word-for-word is not going to help us to understand you problem.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to exit from loop after 3 time

hi
how to exit from loop after 3 time
loop at itab.
<exit after 3 time>
endloop.
thanks

Hi,
You can check the value of SY_TABIX inside loop,
For Example:
Loop at itab.
if sy-tabix = 3.
Exit.
endif.
Endloop.
Hope it helps
Regrds
Mansi

How to Exit from Session by executing program

How to Exit from Session by executing program

Hi,
Try the following
CALL the function module HLP_MODE_CREATE and pass '/nex' to tcode import parameter.
Regards,
Sesh
Message was edited by: Seshatalpasai Madala

How to exit from recovery mode?

how to exit from recovery mode?

You could try a hard reset
- hold the home button and the sleep/wake button down at the same time
- the phone will turn off, when the apple logo appears release both buttons
More than likely after this you will still be in recovery mode. If so then you would need to restore the phone through itunes on a pc/mac.
Hope this helps

How to exit from SQL PlUS

HI,I came to know that direct exit from SQL Plus without Oracle shutdown causes future issues of ORA-0600 kind of errors. Is it true? If yes could u pls suggest me how to shutdown from user "SYSTEM/manager". Bcoz with this am warned that I dont have previleges.

Hello,
HI,I came to know that direct exit from SQL Plus without Oracle shutdown causes future issues of ORA-0600 kind of errors. Is it true?The ORA-00600 is an internal error it can be caused for instance by a Bug, a corruption, ... , and if someday you experience this kind of error, you should open a Service Request to My Oracle Support.
However, I've never heard that exiting sqlplus could cause this kind of error. Where did you get such information ?
how to shutdown from user "SYSTEM/manager". To shutdown the database you should be connected with the User SYS (as SYSDBA). You may use the following statement:
sqlplus /nolog
connect / as sysdba
shutdown immediate;
exitHope this help.
Best regards,
Jean-Valentin

How to exit from the class execution process?

I am invoking an exe from my Java application using the Runtime.getRuntime().exec() method.
though the process is completed, the class is still running.
how do i exit from the class execution, but with the process still running??

To sabre150 :
I am directly executing the command through the exec() method:
Runtime.getRuntime().exec("...../iexplore.exe");This way, the control is going to the opened IE window and only on closing it, my class is exiting.
Is there any other way where I can come out of the class, but ensure that the process which i run through the exec() method, is still running?

How to exit from method if there is any Error message

Hi All,
I have one button (Retrieve) and on that button I am calling a method(OnRetrive) and in that method i am calling func module and in that i am getting some messages.
<b>Now If that FM gives Error message then i have to exit from that method without processing further code.</b>
How can i do this? Help!!!
Expecting your reply ASAP.

Use the RETURN statement. It will get out of your method.
Regards
Nithya

How to exit from offline profile in Nokia 9300 com...

My phone is currently in offline mode. I can not exit offline mode from phone mode. The device mode (when I open phone covers is not working). If I press power button it said that "Offline profile is active". I tried hard reset with shift+ctrl+F but that does not work. Are there any way to exit from this mode and if not, how I can recover my data which is unfortunatelly not all on memory card?
Thanks.
Message Edited by zokila on 07-Jul-2008 02:53 PM

Hi,
First of all you should create outbound plug in the window you are trying to exit with plufg type "Exit"
Then create method handler in the view with this code
        data lo_view_cntr type ref to if_wd_view_controller.
        data lo_win_cntr type ref to if_wd_window_controller.
        data: l_parameter_list type wdr_event_parameter_list,
              l_parameter type wdr_event_parameter,
              l_val type ref to data,
              l_val_url type REF TO data.
        field-symbols: <fs> type any,
                       <fs_url> type any.
        lo_view_cntr = wd_this->wd_get_api( ).
        lo_win_cntr = lo_view_cntr->get_embedding_window_ctlr( ).
        CREATE DATA l_val type c.
        CREATE DATA l_val_url type string.
        ASSIGN l_val->* to <fs>.
        ASSIGN l_val_url->* to <fs_url>.
        <fs> = 'X'.
        <fs_url> = 'http://your-link.com'.
        l_parameter-name = 'URL'.
        l_parameter-value = l_val_url.
        INSERT l_parameter INTO TABLE l_parameter_list.
        lo_win_cntr->if_wd_view_controller~fire_plug( EXPORTING plug_name = 'EXIT_PLUG'
                                                                parameters = l_parameter_list ).
      You can easily change this logic to exit application instead of redirecting to the site
       just changing to
       l_parameter-name = 'CLOSE_WINDOW'.

How to exit from real racing 3?

Hi,
I have installed Real racing3 in my iphone 5s. after some gaming I wanted to exit from it but couldn't find an exit option. And now I still can't find it to competely exit from it. May someone please say me how to exit?
Thanks.

Double tap the Home button...slide the last used view of the app up...above the app icon. Tap Home button when finished.

How to exit from SQL*Plus based on the return value of a SQL select stment?

Hi
I have a SQL script executed from SQL*Plus. I would like to know if SQL*Plus
supports any kind of branching or exiting from script execution based on a
returned value of a SQL select statement. I am on 9i.
Regards,
Tamas Szecsy

in sqlplus, you have whenever
ex:
whenever sqlerror exit failure
insert into ...
-- if this fails, then you will be out
insert into ...
-- if this fails, then you will be out
whenever sqlerror continue
insert into ...
-- if this fails, this continues
insert into ...and you have PL/SQL
declare x number;
begin
select count(*) into x from emp;
if (x=14) then null; end if;
end;
/note that you can mix those in some case
-- exit if there is no row in emp
whenever sqlerror exit 1
var dummy number
exec select count(*) into :dummy from emp having count(*)!=0

How to exit from LDOM?

Similar Messages

Maybe you are looking for