How to export a schema and import the schema to a different schema name

I am using Oracle9i Oracle Enterprise Manager Console.
I can export the HR to a dmp file.
I have created another user call MYHR and I would like to import hr.dmp to the new user.
1. How can I add a schema using OEM?
I can do it by creating a table in MYHR and refresh OEM.
2. How can I import HR.dmp to MYHR using OEM.
I can import it using command line:
imp user/password@connectstring file='c:\hr.dmp' full='Y'
Any hints are appreciated

Hi,
1.
You don't have to create a schema explictly.
Say you create a user u1. Now this user u1 create some object s, then the schema u1 is automatically created.
Schema is actually a logical collection of objects.
2.
Why using OEM for importing. Using the command is much more easier.
Your command is bit incorrect. Don't use full=y to import a schema.
Use ; imp userid=user/password@connect_string file=filename fromuser=HR touser=MYHR
Better add "log=some text file". Then use can see the log also.
Regards.

Similar Messages

How to export internal table and pass the internal table to another screen?

Hi,
I have a sql SELECT statement that select data from table into internal table. I would like to export out the internal table and pass to another screen and display the data in ALV list. How to export it out? I try but the error given was " The type of "OUT_SELECT_ITAB" cannot be converted to the type of "itab_result".
Another question is, how to pass the internal table that i export out from the function module to another screen?
Here is the code
==============================================================
FUNCTION ZNEW_SELECT_ZSTUD00.
""Local Interface:
*" IMPORTING
*"     REFERENCE(IN_SELECT_YEAR) TYPE ZSTUD00-EYEAR
*" EXPORTING
*"     REFERENCE(OUT_RESULT) TYPE CHAR9
*"     REFERENCE(OUT_SELECT_ITAB) TYPE ZSTUD00
*& Global Declarations
DATA: itab TYPE ZSTUD00,
      itab_result TYPE TABLE OF ZSTUD00.
*& Processing Blocks called by the Runtime Environment
itab-eyear = IN_SELECT_YEAR.
SELECT *
FROM ZSTUD00
INTO TABLE itab_result
WHERE eyear = IN_SELECT_YEAR.
IF sy-subrc = 0.
out_result = 'Success'.
OUT_SELECT_ITAB = itab_result.
ELSE.
out_result = 'Fail'.
ENDIF.
ENDFUNCTION.
===============================================================
Please advise. Thanks
Regards,
Rayden

Hi Nagaraj,
I try to change it in Tables tab page but it state that TABLES parameters are obsolete. when i "Enter". I try to "Enter" again. it seem to be ok but it stil give me the same error.
================================================================
FUNCTION ZNEW_SELECT_ZSTUD00.
""Local Interface:
*" IMPORTING
*"     REFERENCE(IN_SELECT_YEAR) TYPE ZSTUD00-EYEAR
*" EXPORTING
*"     REFERENCE(OUT_RESULT) TYPE CHAR9
*" TABLES
*"      OUT_SELECT_ITAB STRUCTURE ZSTUD00
*& Global Declarations
DATA: itab TYPE ZSTUD00,
      itab_result TYPE TABLE OF ZSTUD00.
*& Processing Blocks called by the Runtime Environment
itab-eyear = IN_SELECT_YEAR.
SELECT *
FROM ZSTUD00
INTO TABLE itab_result
WHERE eyear = IN_SELECT_YEAR.
IF sy-subrc = 0.
out_result = 'Success'.
OUT_SELECT_ITAB = itab_result.
ELSE.
out_result = 'Fail'.
ENDIF.
ENDFUNCTION.
===============================================================
regards,
Rayden

How to export outlook calendar and import them in OCS calendar

We used POP accounts so all the calendars, emails, tasks etc. were located locally in the PST file. i am in the process of upgrading everyone to the OCFO 10.1.3.07. I tried for a few users to just export from Outlook the calendar items and re-import them after the OCFO was installed but it seems to add the items correctly but we can't see availability of the users in the scheduling from outlook meeting creation screen.
Is there a special migration procedure from stand alone outlook PST to OCS calendar ?
thanks for any help.

Can you click "Add Invitees" , click the "To" button and pick them from the Oracle Global Address list?
Joe

How row migration get eliminated by export and import the table.

Hi ,
Please let me know,how row migration get eliminated by export and import the table.
Another method,deleting migrated rows and inserting those rows from copied table,
i think the concept behind this method is,inserting these rows into new block.
pls correct me if i am wrong.
Thanks,
Kumar.

Hi!
You can also use ALTER TABLE MOVE command, or if you are on 9i you can use DBMS_REDEFINITION package.
If you have a maintainance window the easiest way would be to use alter table move.
Regards,
PP

How to export and import the lsmw

Hi Friends,
How to export and import the objects in lsmw
from dev to qas(quality) systems........
its urgent.........
regards,
venu.

best way is to create a transport and move it to other enviroments
There are two ways of Transporting for this. Can choose any one.
Goto the LSMW Transaction
1)Extras>Export Projects>(Give the Project name)
In next screen(Choose what subproject, routines, etc.. you wan to copy then, Export Rules-->Export((Will prompt for file name)
A text file will be downloaded.
In the Target System
Goto LSMW Extras-->Import Projects and give the text file which was downloaded.
2)Extras-->Generate Change Request
Assign a change request which is basically a transport request and you can then get this transported from one system to another through the basis route.

When I export a AAF file from Protools 9 and Import the file into Logic ProX the drum track is out of sync. I created the drum loop using NI Maschine. Has anyone else seem this??

When I export an AAF file/project from Protools 9 using an external drive and import the AAF into Logice Pro X the drum track does not play correctly. It is out of sync with the rest of the track. I created the drum loop as a plugin using Native Instruments Maschine. Has anyone else had this problem?? Also how would I go about exporting the midi tracks from the Protools session. The midi track does not show when the file is imported to Logic Pro X. The midi data should export with the AAF file correct??

Are you using any plugins in Logic?
In Preferences/Audio under the General tab, how do you have the plug-in-latency compensation set?

Reg. Particulare table export and import the same table

Dear Sir
I am MM consultant, I would like to export only one table and import the same after some request released,how to do this. Please help me.
I am working in Oracle 10.2.0.2.0 release
Thanks in advance
Rajakumar.K

Hello Raja,
you want to export some table, perform some changes on the system (releasing a transport) and then reimport the old state of the table? This sounds like a very bad idea. You are inviting desaster and compromise the consistency of your system.
Go to http://help.sap.com chose your release and enter the search term brspace to find out
supported ways to reorganize a table.
Regards,
Mark

I'm trying to find out how to export my apple contacts to the Salesforce software and they need to be in a csv format and I don't know if this is possible and how to do it if it is?

I'm trying to find out how to export my apple contacts to the Salesforce software and they need to be in a csv format and I don't know if this is possible and how to do it if it is?

I think there are third-party programs which will do that, but you can also do it with Automator:
See the links in my post, here: https://discussions.apple.com/message/22390873#22390873
The file or clipboard contents will be in Tab Separated vars, so you'll have to open with a spreadsheet program and save as Comma Separated Vars format.

How to export an album and keep images in the same order in elements 11 mac

I made an album of my trip to Australia (lots of pictures) and changed the order of the images (not the same as shooting order) and when I export the images in the album to a folder or memorystick, the images are copied to that place but I lost the album order of the images.
How can I prevent that, without having to renumber al 500 images separatly?
Gr Jos

Thanks for the tip, Michel
It worked like a charm…
cheers Jos
Op 28 okt. 2013, om 18:49 heeft MichelBParis <[email protected]> het volgende geschreven:
Re: How to export an album and keep images in the same order in elements 11 mac
created by MichelBParis in Photoshop Elements - View the full discussion
JosU a écrit:
I made an album of my trip to Australia (lots of pictures) and changed the order of the images (not the same as shooting order) and when I export the images in the album to a folder or memorystick, the images are copied to that place but I lost the album order of the images.
How can I prevent that, without having to renumber al 500 images separatly?
Gr Jos
The order in album is only kept in the organizer database, so the only way not to lose that order is to rename files.
If you are using the 'export' function, select your album in custom order, select all photos and in the dialog, choose to rename with a common base name.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5794538#5794538
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5794538#5794538
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5794538#5794538. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Is it possible to export and import the roles and users tables?

Hi,
is there any possibility to export and import the role and user definitions?
We have a SAP MDM repository with a lot of roles and users and also with a lot of changes.
And now I'm searching for a fast and efficient way of managing the roles and users.
Thanks and Regards, Melanie

Hi Melanie,
There is no export/import functionality for roles and users. The only way to manage these in an automated way would be to write a program that uses the Java or ABAP APIs. Both APIs expose functionality to create, update and delete roles and users.
Hope this helps,
Richard

Error while Export from 10g and import to 11g

Hi,
I get the following error on few tables when i try to export from 10g and import to 11g DB.
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
. importing TBAADM's objects into TEST
. . importing table "ACCT_AUTH_SIGN_TABLE"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "TEST"."ACCT_AUTH_SIGN_TABLE"."MODE_OF_DESPATCH" (actual: 3, maximum: 1)
How to over come this ?
Regards,
jibu

Jibu wrote:
Hi,
I get the following error on few tables when i try to export from 10g and import to 11g DB.
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
. importing TBAADM's objects into TEST
. . importing table "ACCT_AUTH_SIGN_TABLE"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "TEST"."ACCT_AUTH_SIGN_TABLE"."MODE_OF_DESPATCH" (actual: 3, maximum: 1)
How to over come this ?
Regards,
jibu
[oracle@localhost sql]$ oerr ora 12899
12899, 00000, "value too large for column %s (actual: %s, maximum: %s)"
// *Cause: An attempt was made to insert or update a column with a value
//         which is too wide for the width of the destination column.
//         The name of the column is given, along with the actual width
//         of the value, and the maximum allowed width of the column.
//         Note that widths are reported in characters if character length
//         semantics are in effect for the column, otherwise widths are
//         reported in bytes.
// *Action: Examine the SQL statement for correctness. Check source
//          and destination column data types.
//          Either make the destination column wider, or use a subset
//          of the source column (i.e. use substring).

How to export string in CDATA with the jaxb xml writer?

How to export string in CDATA with the jaxb xml writer?
It read CDATA no problem but it is lost on write.

Found it:
### THIS WORKS WITH SUN JAXB REFERENCE IMPLEMENTATION. ###
(Not tested with any other)
In the xsd, you must create a type for your string-like element.
Then associate a data type converter class to this new type, which will produce CDATA tags.
Then you must set a custom characterEscapeHandler to avoid the default xml escaping in order to preserve the previously produced CDATA tag.
Good luck.
-----type converter-----
import javax.xml.bind.DatatypeConverter;
public class ExpressionConverter {
     * Convert an expression from an XML file into an internal representation. JAXB will
     * probably have already stripped off the CDATA encapsulation. As a result, this method
     * simply invokes the JAXB type conversion for strings but does not take any other action.
     * @param text an XML-compliant expression
     * @return a pure string expression
     public static String parse(String text) {
          String result = DatatypeConverter.parseString(text);
          return result;
     * Convert an expression from its internal representation to an XML-compliant version.
     * This method will simply surround the string in a CDATA block and return the result.
     * @param text a pure string expression
     * @return the expression encapsulated within a CDATA block
     public static String print(String text) {
          StringBuffer sb = new StringBuffer(text.length() + 20); //should add the length of the CDATA tags + 8 EOLs to be safe
          sb.append("<![CDATA[");
          sb.append(wrapLines(text, 80));
          sb.append("]]>");
          return DatatypeConverter.printString(sb.toString());
     * Provides line-wrapping for long text strings. EOL indicators are inserted at
     * word boundaries once a specified line-length has been exceeded.
     * @param text the string to be wrapped
     * @param lineLength the maximum number of characters that should be included in a single line
     * @return the new string with appropriate EOL insertions
     private static String wrapLines(String text, int lineLength) {
          //wrap logic, watchout for quoted strings!!!!
          return text;
------in caller----
Marshaller writer = ......
writer.setProperty("com.sun.xml.bind.characterEscapeHandler", new NoCharacterEscapeHandler());
-----escaper-----
import java.io.IOException;
import java.io.Writer;
import com.sun.xml.bind.marshaller.CharacterEscapeHandler;
public class NoCharacterEscapeHandler implements CharacterEscapeHandler {
     * Escape characters inside the buffer and send the output to the writer.
     * @param buf buffer of characters to be encoded
     * @param start the index position of the first character that should be encoded
     * @param len the number of characters that should be encoded
     * @param isAttValue true, if the buffer represents an XML tag attribute
     * @param out the output stream
     * @throws IOException if the writing process fails
     public void escape(char[] buf, int start, int len, boolean isAttValue, Writer out) throws IOException {
          for (int i = start; i < start + len; i++) {
               char ch = buf;
               if (isAttValue) {
                    // isAttValue is set to true when the marshaller is processing
                    // attribute values. Inside attribute values, there are more
                    // things you need to escape, usually.
                    if (ch == '&') {
                         out.write("&");
                    } else if (ch == '>') {
                         out.write(">");
                    } else if (ch == '<') {
                         out.write("<");
                    } else if (ch == '"') {
                         out.write(""");
                    } else if (ch == '\'') {
                         out.write("'");
                    } else if (ch > 0x7F) {
                         // escape everything above ASCII to &#xXXXX;
                         out.write("&#x");
                         out.write(Integer.toHexString(ch));
                         out.write(";");
                    } else {
                         out.write(ch);
               } else {
                    out.write(ch);
          return;

Is exporting from 8i and importing in 11gR2 is supported?

is exporting from 8i and importing in 11gR2 is supported?
the 8i is on win 2000 and the 11gr2 is on linux5
Thanks
Edited by: user9145417 on 07-Sep-2010 16:53

I experience same problem in Windows. Exp terminated without error. But I assume that's windows fault (isn't it always the case?). It works in Solaris though.
dwdb201:/d1/usr/oracle >exp file=/d1/usr/oracle/ssss.dmp owner=delayuser
Export: Release 9.2.0.7.0 - Production on Wed Sep 8 11:35:56 2010
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Username: sys/*****@QWDB203_WEB as sysdba
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management and Real Application Testing options
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P15 character set (possible charset conversion)
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user DELAYUSER
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user DELAYUSER
About to export DELAYUSER's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export DELAYUSER's tables via Conventional Path ...
. . exporting table ADDRESS 806571 rows exported
.

Export from 11g and import to 9i

I have run exp from machine runing oracle 9i to export tables from
another machine running oracle 11g .Export is working fine but while
importing in Oracle 9i it is giving the following errors.
import done in US7ASCII character set and AL16UTF16 NCHAR character
set
import server uses WE8ISO8859P1 character set (possible charset
conversion)
IMP-00003: ORACLE error 96 encountered
ORA-00096: invalid value for parameter plsql_compiler_flags, must be
from among NON_DEBUG, DEBUG, INTERPRETED, NATIVE
IMP-00000: Import terminated unsuccessfully
Can anybody suggest how to do this.
Thanks for your valuable time.

Duplicate post
export from 11g and import to 9i
Srini

How to export Account settings and mailboxes

I am migrating to a new computer.
Now I need to trasfer some of the Mail.app data from the old mac, including:
--the mail account settings
--For POP3 accounts, i need to transfer the msgs for those inboxes because the received mails do not have a copy on the servers.
--the Sent box in Mail.app. It seems this is a "global" container for all outgoing msgs, regardless IMAP or POP3 accounts. And I assume all the msgs therein are stored locally.
These are everything I need to transfer. And not with other user data. So i guess the Migration Assistant wont help.
Email clients normally have Export/Import functions but i cant find them with Mail.app.
So how should I do the transfer as specified above? Thanks folks.

If you don't want to use Migration Assistant, you could just copy the files to an external HD and then copy them into the exact same locations on the new machine. You can find the emails here:
Users -> Library -> Mail -> there are several folders you want to copy: Mailboxes, all POP-yourname (if more than one).
As for account settings: what I've done is simply take a screenshot of every window in accounts, named it, and then have a copy to look at if I need to set it up again.
Address Book: If you will highlight one entry, then "select all", and then choose export under file menu, you can export the entire Address book and import the entries into the new one.

My dad has itunes on his PC. I don't have my own but I recently have an iPad mini and an iPod. I don't know how to get songs onto itunes on the PC, using a different account or at least private/ separate..

My dad has itunes on his PC. I don't have my own but I recently have an iPad mini and an iPod. I don't know how to get songs onto itunes on the PC, using a different account or at least private/ separate..
So how do I create a separate I tunes on a PC which already has itunes... Or if not can I plug my iPad to the PC and use itunes on my iPad, and drag mp3s from a computer.
I'm not sure what the equivalent of a desktop is on the iPad.. And I don't actually know how to use the icloud either...
Can anyone start me off, given it have a iPad and use of a PC - not mine with existing iplayer
I do have spotify soundcloud so I could potentially use these.. If there is a route of getting either mp3's etc to end up on my iPad or iPod.
Kind Regards

iTunes 11
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device and follow the instructions.

How to export a schema and import the schema to a different schema name

Similar Messages

Maybe you are looking for