How to extend the 1k size limit of ODBC?

Hi everyone,
My problem is if my SQL string size is over 1k, then ODBC driver will fail. How to extend
the size?
Thanks,

OK, just for clarity, there are two limits that you may be running up against.
1) There's a limit on the total length of a SQL statement. I would tend to consider it a bug if you could SQLExecDirect a 4k statement by passing in the actual length of the string, but only a 1k statement by indicating that the string is NULL-terminated. If that's actually what you're seeing, you may want to contact Oracle support. I believe this limit was increased between Oracle7 & Oracle8, 512 -> 4096 characters IIRC.
2) There's a limit on the length of a string literal which should correspond to the maximum size of a varchar2 column. If this is the limit you're hitting, then you want to go the prepare/ bind/ execute route I explained in the previous post.
Justin

Similar Messages

How to increase the attachment size of a portal

Hi,
We have a portal developed using JSP.
We have an option for attaching files. Now the maximum limit is only 5 MB. So we thought of using FTP so that we can increase the attachment limit. But we are not able to attach files more than 1 MB.
Could you please help us in resolving this. Any idea how to increase the attachment size limit?
Thanks in advance

Hi,
See what Patrick Yee has posted.
how to create own page format in smartforms immmedia
Svetlin

Anyone know the ActiveSync size limit for Sending?

I noticed that I have quite a few Event ID 1008 Warnings on my Exchange server today. All of them are exactly the same and are all for the same user. They occur every 5-10 min. So I have discovered through research that this is caused (at
least in this case) by a message being sent from the mobile device (iPhone in this case) that is to big.
I have run a test on my own device (Droid X) where I attempted to send a message with a 14MB attachment. The exact error is logged at the same time as the other intial error. This is easy enough to fix: you simply need to go to the
Outbox on the phone or device and delete the stuck message.
However, I am now currious where this limit is set and how to find the exact size limit. Through searching no one seems to know, but the limit is deteremined somewhere between 5-10MB. Also, it is not set in Exchange as others like to recommend.
My send connector message size is 50MB and there is no limit set on the ActiveSync policy.
Anyone know the answer to this? Is it an Exchange setting or is it determined by the particular phone/tablet?\
Thanks.
Event 1008 for others reference:
An exception occurred and was handled by Exchange ActiveSync. This may have been caused by an outdated or corrupted Exchange ActiveSync device partnership. This can occur if a user tries to modify the same item from multiple computers. If this is the case,
Exchange ActiveSync will re-create the partnership with the device. Items will be updated at the next synchronization.
URL=/Microsoft-Server-ActiveSync/default.eas?User=USERNAME&DeviceId=ApplC8WFDD8DDDP7&DeviceType=iPhone&Cmd=SendMail&SaveInSent=T
--- Exception start ---
Exception type: System.Web.HttpException
Exception message: Maximum request length exceeded.
Exception level: 0
Exception stack trace: at System.Web.HttpRequest.GetEntireRawContent()
at System.Web.HttpRequest.get_InputStream()
at Microsoft.Exchange.AirSync.Command.get_InputStream()
at Microsoft.Exchange.AirSync.Command.WorkerThread()

Looks like I found the probable location of this size limit. Looking at the web.config file in the
ExchServer\ClientAccess\Sync folder there is an entry for "MaxDocumentDataSize". THe value is currently set at 10240000:
<add key="MaxDocumentDataSize" vaulue ="10240000">
So this is 9.75 MB or there about, which sounds about right. I will try increasing this limit at some point to verify.
Can anyone confirm this?

How do I change the attachment size limit in Calendar Server 6.3, UWC, IWC?

How do I properly increase or decrease the attachment size limit with Calendar Server and all supported user interfaces to it such as WCAP, UWC (Communications Express) and IWC (Convergence)? From my experience with the Outlook Connector, there seems to be some limit imposed by cshttpd on the size of a file upload (I believe I actually got an HTTP error code back on the wcap request indicating something was too big, sorry I don't have it handy, I'll have to re-test). Additionally, it seems UWC imposes additional limits (Example: http://docs.sun.com/app/docs/doc/819-4440/6n6jfgcjh?l=en&a=view&q=fileSizeHardLimit) but I can't seem to get those to work at all. I found many different web.xml related to UWC and I'm not sure which one to change, I tried a couple but had no success because UWC would always report this error if I uploaded between 4-5 megs: com.iplanet.jato.util.WrapperRuntimeException
Root cause = [java.io.IOException: Request cancelled because file input field
"importFile" size is over the configurable limit of 4194304 bytes; see filter init
parameter fileSizeHardLimit]
And it would complain about requestSizeLimit I think if it was over 5 megs, claiming that limit was 5242880. IWC gives a generic error when the upload is too big and rejects it.
I fear that a 4 meg limit will be too imposing and of limited value, so I would either like to raise it, or consider lowering it to 0 bytes so attachments cannot be used at all. I have been looking high and low for information on how to do this and all I can find is the UWC examples. I plan to support the Outlook Connector, UWC, and IWC so the limits should ideally be the same across each. Some of the Exchange data we wish to import does have some attachments so it would be good to continue support for that. I did see some other posts about quota RFEs but at this point I am not concerned about the disk consumption. Can anyone help? Thanks. Please let me know if there is any more information I can provide. I am running SCS6u1 on Solaris 10 SPARC.

Fred@egr wrote:
Thanks!!! This is working with IWC and I am pretty sure it will work with Outlook. I didn't think to look at config options for mshttpd since I don't have it installed and ics.conf doesn't list the http.service.maxmessagesize and service.http.maxpostsize by default.http.service.maxmessagesize is only relevant to mshttpd, not cshttpd. service.http.maxpostsize applies to both.
UWC is still limiting me though; I'm sure I can reconfigure UWC if I just know which file to edit and if I need to redeploy anything. I'm using the same install paths as the SCS6 Single Host example and I'm not sure which the "uwc-deployed-path" is supposed to be. Again, thanks.If you have deployed UWC/CE to Application Server you would edit the following file and restart application-server:
/opt/SUNWappserver/domains/domain1/generated/xml/j2ee-modules/Communications_Express/web.xml
e.g.
<filter>
    <filter-name>MultipartFormServletFilter</filter-name>
    <filter-class>com.sun.uwc.calclient.MultipartFormServletFilter</filter-class>
    <init-param>
      <param-name>fileSizeHardLimit</param-name>
      <param-value>15485760</param-value>
    </init-param>
    <init-param>
      <param-name>requestSizeLimit</param-name>
      <param-value>15485760</param-value>
    </init-param>
    <init-param>
      <param-name>fileSizeLimit</param-name>
      <param-value>15485760</param-value>
    </init-param>
</filter>Regards,
Shane.

HT4863 How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

You can't change it, and I suspect few email providers would allow a file that big. Consider uploading it to a service like Dropbox, then email the link allowing the recipient to download it.

How to extend the size of a layer?

Hi all,
Hopefully this is an easy one, but I think I'm just thinking about it wrong. I'm animating the movement of one part of a photo. I duped the photo layer, masked out the subject I want on the copy layer and have animated its position over time. Pretty straight forward. The problem is that as the item moves its edges are seen. I wanted to just use the clone stamp to add a little more to the image but obviously you can't paint or stamp past the edge of the layer. So I was trying to figure out how to 'extend' the bounds of the layer a little so that I can fill in the missing area.
Thanks for any input.
-Chris

Hi Todd,
Thanks for the reply. Unfortunately, I'm not having any success with this method. Here's what I have:
Original photo of kids with ball at playground. Ball is at lower left but partially cut off. Photo is on layer 1.
I duplicate layer 1.
Rename layer 2 to 'ball' and layer 1 to 'bg'
On ball layer I mask out the ball and then animate its position over the length of the clip.
When I precompose the ball layer (I tried both moving the attributes and leaving them as is) I get the new composition 'ball comp 1'. I open up ball comp 1 and change the composition settings to make the width taller.
So far, so good. Now I'm trying to follow your suggestion to then paint on the precomposition layer. Do you mean to go back to the original composition where the new pre-comp layer is and try to paint on it? If so, that doesn't work. If I select the Clone tool and try to paint the layer actually gets moved rather than painted on. If I open the new 'ball comp 1' composition and try to paint there it doesn't work either. And if I open up the layer in that comp that has the ball in it and try to paint there, the edges are still the original edges.
Any idea where I went wrong?
THanks,
Chris

How to get the correct size of the loaded swf file?

final public class main extends Sprite
public function main()
   loaderInfo.addEventListener(Event.COMPLETE, _onLoadCompleted);
private function _onLoadCompleted(event: Event): void
   var tw: int = stage.width;
   var th: int = stage.height;
   var tsw: int = stage.stageWidth;
   var tsh: int = stage.stageHeight;
Above is my simple as3 project in flex builder 3.
My screen resolution is 1920*1080, when debugging, the swf is stretched to the full client area of the IE, but the stage.stageWidth is 500 and the stage.stageHeight is 375, both the stage.widht and stage.height are 0, who can tell me why and how to get the right size of the swf file, named the client area size of the IE in this situation?
Thanks very much!

The HTML wrapper might resize the SWF later, so wait a frame and check stageWidth/stageHeight again.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

How to increase the heap size of the container in whioch BPEL is running ?

Hi All,
I recently raised an SR they have asked me to do the following,
Can you please try and start the container running the BPEL process with max
heap space (-Xmx) of 2 GB and the eden space (-Xmn) at about 60% of 1228m and
the option -XX:+AggressiveHeap set. (even though this option is recommended for
multi processor machines say 4)
can anyone kindly explain me how to increase the Heap size and Eden size of BPEL container ?
Thank You

Hi Deepak I cant see any attribute or element in the oc4j_opmn.xml file regarding heap memory. In the server properties I changed the size of heap memeory how can I rollback.
I am getting the following error
Configuration information
Running in C:\product\10.1.3.1\OracleAS_1
Operation mode:Startup, App Server, No Enterprise Manager, Single Instance
Oracle home:C:\product\10.1.3.1\OracleAS_1
Oracle home name:Unnamed
Instance name:SOA.01hw117905.India.TCS.com
Instance type:allProducts
Version:10.1.3.4.0
Uses infrastructure:false
Not an infrastructure instance, no infrastructure information available
Components:[j2ee, apache, orabpel, oraesb, owsm, Wsil]
2009-08-19 09:08:51.863--Begin log output for Mid-tier services (SOA.01hw117905.India.TCS.com)
2009-08-19 09:08:51.863--Processing Step: starting OPMN
2009-08-19 09:09:00.394--Processing Step: starting OPMN managed processes
2009-08-19 09:09:35.19--End log output for Mid-tier services (SOA.01hw117905.India.TCS.com)
An unknown OPMN error has occured
oracle.appserver.startupconsole.model.ConsoleException: An unknown OPMN error has occured
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:121)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
     at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
     at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:89)
     ... 6 more
Exception caused by
Error from opmn during process control operation
oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
     at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
     at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:89)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
<?xml version='1.0' encoding='WINDOWS-1252'?>
<response>
<msg code="-82" text="Remote request with weak authentication.">
</msg>
<opmn id="01hw117905:6200" http-status="206" http-response="2 of 3 processes started.">
<ias-instance id="SOA.01hw117905.India.TCS.com">
<ias-component id="default_group">
<process-type id="home">
<process-set id="default_group">
<process id="172" pid="2176" status="Alive" index="1" log="C:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log" operation="request" result="success">
<msg code="0" text="">
</msg>
</process>
</process-set>
</process-type>
<process-type id="oc4j_soa">
<process-set id="default_group">
<process id="173" pid="5556" status="Stopped" index="1" log="C:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~oc4j_soa~default_group~1.log" operation="request" result="failure">
<msg code="-21" text="failed to start a managed process after the maximum retry limit">
</msg>
</process>
</process-set>
</process-type>
</ias-component>
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server">
<process-set id="HTTP_Server">
<process id="171" pid="2724" status="Alive" index="1" log="C:\product\10.1.3.1\OracleAS_1\opmn\logs\\HTTP_Server~1.log" operation="request" result="success">
<msg code="0" text="">
</msg>
</process>
</process-set>
</process-type>
</ias-component>
</ias-instance>
</opmn>
</response>

How to query the tablespace size increment speed?

Hello,
Do you have any directions or ideas on how to know the tablespace size increments history. or how to know the frequency of tablespace size increment.
when I went into new database, I never managed this database before, i want to know the tabelspace size increments speed for do the reasonable space extend.
so could you please give us a guide thanks!

RLUO wrote:
Hello,
Do you have any directions or ideas on how to know the tablespace size increments history. or how to know the frequency of tablespace size increment.
when I went into new database, I never managed this database before, i want to know the tabelspace size increments speed for do the reasonable space extend.
so could you please give us a guide thanks!Hi, there good way is using DBMS_SPACE.OBJECT_GROWTH_TREND as Rajesh mentioned that.But also you can use some AWR views to getting this information.Seee below link.
tablespaces' growth trend

How to set the fix size jframe window

when I run the jframe ,the jframe window size is very small
1)how to set the fix size jframe window??
2)how to set the jframe cannot change the window size??
thx~~

1. You can set the size by calling JFrame's method setSize. There are two versions of this method: (1) setSize(int width, int height) and (2) setSize(Dimension d). Note, that when you use this method to set the frame size, you don't have to call JFrame's pack method.
2. JFrame has a method called setResizable(boolean resizable) which you can call with the argument false.
Without any ill intent, these questions are regarding something that is very easily answered by looking at the documentation for the JFrame class. I suggest to anyone working with swing to at least look briefly through the base classes they're extending before giving up. In my experience it is always more gratifying to figure things out on my own than asking someone. But please don't take this the wrong way, I respect people who seek out help in order to further their knowledge, instead of just giving up.

The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 10 MB

Dear sir/madam
I installed exchange server 2013
my clients want to attache more than 10 MB
when they attache more than 10 MB they got this massage "The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 10 MB"
so how can you help me to increase the attachment size and the way to do that
how can I change the default 10 MB
Please can you help me as soon as
Rawa Zangana

Hi Rawa,
You can use EAC or EMS to set the MaxSendSize. The default value of MaxSendSize is 10 MB.
If you use EAC, here is the steps:
Logon to EAC -> Mail flow -> Receive connectors -> settings-> type the Maximum send message size you want to set
If you use EMS, please use the cmdlet Rajith provided.
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

I cannot figure out how to change the photo size on my iPhone 5s. I was given the choice of small, medium or large the first time I took a picture. Now I have no idea how to change it to medium. Can anyone help?

I cannot figure out how to change the photo size on my iPhone 5s. The first time I took a pic it asked if I wanted smalll, medium or large and listed the pixels. I chose small but am now finding that is too small. Can anyone help me set it to medium now? I can't find any setting for that. I'm a newby to iPhones and have no idea what I'm doing. Thanks for any help you can offer.

By "sending" do you mean sending email?
If so, what app are you using to take the photos on your iPhone 5? Or are the photos from a different source (saved to your Camera Roll from somewhere else, like a web page or Messages)?
My guess is that Mail gives you the option to send different file sizes when it detects you are trying to Mail a really large photo file. The size of photos on the iPhone 5 is really big and some email providers may stop your mail from being delivered if attachments are too large. Thus, Mail tries to help you by offering to resize the photo.
I suspect that if you are sending smaller files, Mail does not bother giving you options to save a smaller version. In fact, I have seen this behavior. So, if the photo is already "small enough", it gets sent as-is.
To my knowledge, there is no global iOS setting for this. Some apps may have different rules, of course.

Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?

Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers.

How to get the latest credit limit values per each customer in the report.

Hi All,
Can anybody give me an idea on how to get the latest credit limit values per each customer in the report.
I have below requiremnt.
I have cube which is having transactional data on document and customer level .and it also having master data info object in the cube which is credit management view having all the customer numbers .
This credit management view is master data info object having credit limit key figure as attribute.These credit limit are per each customer.
So we need these credit limits in the report as dynamic values .(I mean whatever be the current credit limit in the master data table for that paricular customer that should show up in the reporting).
one more thing these credit limits should roll up correctly at the HTR level.
One HTR having number of customers .
for example HTR 100 can have customer number 200,300,400.
Those 200,300,400 customer credit limits should roolup correctly at the HTR 100 level.
Example below :
Cube DATA :
HTR Customer Doct number Credit managment view
100 200 10001 200
100 200 10002 200
100 300 10004 300
100 300 10005 300
100 400 10006 400
100 400 10007 400
100 400 10008 400
Master data tabel (P Table)(Credit managment view)
Credit managment view Credit limits
200 1000.00
300 50000.00
400 90000.00
Please remeber :
We can not make these credit limits as navigational becasue these are keyfigure attributes not characteristics.
one more thing we can not make them as charatistics because we need use these credit limits to derive other calkculation. so it is not possibel to derive calculations on charactristics .

Create a formula variable of type replacement path with reference as attibutes of Credit management view and choose your key figure credit limit,say zcredit.
Now create a formula or CKF and use zcredit.
This should display the credit limit in your report as normal key figure.
I didnot get this part "one more thing these credit limits should roll up correctly at the HTR level.", may be the above will solve this too.Try it.
Hope this helps.

How to get the file size (in bytes) for all files in a directory?

How to get the file size (in bytes) for all files in a directory?
The following code does not work. isFile() does NOT recognize files as files but only as directories. Why?
Furthermore the size is not retrieved correctly.
How do I have to code it otherwise? Is there a way of not converting f-to-string-to-File again but iterate over all file objects instead?
Thank you
Peter
java.io.File f = new java.io.File("D:/todo/");
files = f.list();
for (int i = 0; i < files.length; i++) {
System.out.println("fn=" + files);
if (new File(files[i]).isFile())
     System.out.println("file[" + i + "]=" + files[i] + " size=" + (new File(files[i])).length() ); }

pstein wrote:
...The following code does not work. Work?! It does not even compile! Please consider posting code in the form of an SSCCE in future.
Here is an SSCCE.
import java.io.File;
class ListFiles {
    public static void main(String[] args) {
        java.io.File f = new java.io.File("/media/disk");
        // provides only the file names, not the path/name!
        //String[] files = f.list();
        File[] files = f.listFiles();
        for (int i = 0; i < files.length; i++) {
            System.out.println("fn=" + files);
if (files[i].isFile()) {
System.out.println(
"file[" +
i +
"]=" +
files[i] +
" size=" +
(files[i]).length() );
}Edit 1:
Also, in future, when posting code, code snippets, HTML/XML or input/output, please use the code tags to retain the indentation and formatting.   To do that, select the code and click the CODE button seen on the Plain Text tab of the message posting form. It took me longer to clean up that code and turn it into an SSCCE, than it took to +solve the problem.+
Edited by: AndrewThompson64 on Jul 21, 2009 8:47 AM

How to extend the 1k size limit of ODBC?

Similar Messages

Maybe you are looking for