How to extract row_id from PL/SQL procedure and assign that to batch script

Hello Team,
I am stuck with a requirement, wherein I am running a batch script and within the batch script I am calling a procedure which inserts a record in a table (Including a column named l_id).
I need this generated l_id to be passed on as a variable to batch script after PL/SQL procedure completion. So that I can refer this same l_id to update the same record in the table again in the same batch script in the later part.
Looking for some suggestions!!!!
Thanks
-Vj.

789153 wrote:
I am stuck with a requirement, wherein I am running a batch script and within the batch script I am calling a procedure which inserts a record in a table (Including a column named l_id). Operating system? Scripting language or command shell used?
I need this generated l_id to be passed on as a variable to batch script after PL/SQL procedure completion. So that I can refer this same l_id to update the same record in the table again in the same batch script in the later part.
Looking for some suggestions!!!!Don't do this using batch scripts. Batch scripts are very much inferior compared to stored PL/SQL code when it comes to managing databases processes and performing data crunching.
Why can't this be written entirely in PL/SQL? And execution managed from either DBMS_JOB or DBMS_SCHEDULER ? And before answering that, consider the following:
- what is the superior language, PL/SQL or shell script?
- what provides tighter integration with the database, PL/SQL or shell script?
- what provides proper security and access control, PL/SQL or shell script?
As you can call SQL*Plus from a shell script to run PL/SQL, you can call a shell script from PL/SQL instead to run external commands and processes.
Use the right tool for the job. And shell scripting is an excellent tool - but only when correctly used. Are you using it correctly? I strongly doubt that...

Similar Messages

  • *Urgent*How to insert data from MS SQL to the table that create at the adobe form?

    Hi,
    I'm using Adobe life cycle designer 8 to do my interactive form. I would like to ask how to insert data from MS SQL to the table that i have created in my adobe interactive form?
    I really need the information ASAP as i need to hand in my project by next week... i really appreciate any one who reply this post.
    Thanks

    Tou need to do a couple of things
    1. On the Essbase server, set up an odbc system connection to your MySQL database
    2. In the load rule , go to the file menu and select open SQL data source and in the data source put in your SQL statement . A couple of hints. Where it says Select, don't put in the word select and where it say from don't put in from. The system adds them for you. The easiest way ti enter a SQL statement is to do it all in the select area So if your SQL would normanlly say select * from mytable just enter the code as * from mytable in the select area
    The click ol/retrieve and enter in your connection info. Itshould bring data back into the load rule. Save the load rule and use it

  • How to extract data from SAP 4.7 and upload data to SAP ECC 6.0

    Hi,
        How to extract data from SAP 4.7 and upload data to SAP ECC 6.0? Can i use BDC,BAPI,LSMW? Help me please.

    hi
    good
    both works not possible simultaneously.
    If you want to do it in two separate task than you can use the GUI_UPLOAD function module to fulfill your requirement.
    thanks
    mrutyun^

  • How to Start report from pl sql procedure

    I need to create a procedure which runs report and email report output to specified email adress.
    I don't know how to start report from pl/sql. Any help will be appreciated.

    I want to start oracle report from plsql procedure. Is there any OS system command I can use or any other method? My database is installed on windows 2000 machine.

  • Creating page items from pl/sql procedure and using them on a page

    I have a page containing 2 select lists (P21_DEPARTMENTS and P21_DATE). Originally I added them as items that were "select list with submits". The problem is that based on the clearance level of the currently logged on user I only wanted the P21_DEPARTMENTS to be a select list if the user was an administrator. If however the user is not an admin then I want the page to have a hidden form field called P21_DEPARTMENTS that stores the user's department and has a label item that has the department name.
    There is also a report region that generates a table based on the department selected from the select list (if the user is an admin) or the value stored in the hidden form field if the user is not.
    My problem is that I cannot have both those items on the same page and use the HTML built-in authentication to determine which item should be rendered because I need to use the same ID for both items so that the stored procedure in my report region doesn't break. HTML does not permit items to share the same ID.
    I tried to circumvent the problem by creating a stored procedure that performs all of the item rendering in the procedure and uses "htp.p()" to output all of my HTML code. This solution would allow me to pass a parameter into the procedure informing me as to whether or not the user is an administrator. If the user is an administrator the procedure would use a conditional statement and render a select list. If not, the hidden form field and label option would be used instead.
    I finally got the stored procedure working perfectly. Now I am encountering the most bizarre thing. Since the "select list with submit" was not working (I used the same code that gets generated when I created other items using htmlDB's GUI) I decided to use a JavaScript function instead that gets triggered by the onChange event. I send along the value that is currently selected in the select list and in the function I set:
    location.href='http://www.myoraclesite.com/pls/htmldb/f?p=111:21:729740000000000000::NO::P21_DEPARTMENTS:1';
    In theory this should work. The problem is that it doesn't. The page reloads and the P21_DEPARTMENTS select list is not pre-selected.
    The only thing I can think of is that when htmlDB generates page items that you've created with it's own admin tool it assigns some internal guid or something as opposed to when someone tries to generate dynamic page items of their own from a pl/sql procedure it's like the application doesn't even know they exist.
    Any help would be GREATLY appreciated.
    My only other solution would be to create a totally separate page (one for admin and another for non-admin). I would really like to avoid this.
    Thanks in advance.

    I would love to be able to generate my menus and
    various other items in my htmlDB applications in much
    the same way I can using ASP, PHP and Cold Fusion.
    Users should have the ability to write server-side
    code wherever they feel like it. The way htmlDB works
    right now I spend more time trying to figure out how
    to create simple effects and generate simple
    interfaces when I need to be building a portal. Ami - it's important to understand that HTML DB is not like other languages. Thus, trying to force concepts which are common in other languages into HTML DB will often result in more work.
    It's definitely worth the time to go over the HTML DB 2-day Developer, which can be found here: http://www.oracle.com/technology/products/database/htmldb/pdf/B14377_01.pdf
    I can build a portal using Classic ASP, C#, PHP or Cold
    Fusion in like 1/10 of the time that it takes me to
    build one using htmlDB. I understand that this is not
    meant for the hard-core programmer but no web
    programming application in today's day and age should
    prevent experts from getting under the hood.And I can build a Portal in HTML DB in 1/10 the time it will take me to do it in any other language. It's like anything else - proficiency comes with practice and work.
    As for getting under the hood, there is plenty of places you can do that with HTML DB. Keep in mind that HTML DB itself is an HTML DB application, so the limits on what you can build with HTML DB are virtually limitless.
    Sorry for the vent there. After spending the last 2
    days trying to figure out how to implement such a
    straightforward thing and now being informed that it
    can't be done kind of bugged me.I understand your frustration, as I've been there before. My rule for beginners is that if you are writing more than a line or two of code in the first week, you're doing something wrong. Stop, take a break, and then use the ample resources (including searching this forum) to help solve your problem. There are plenty of resources available for you to learn about HTML DB on the HTML DB home page: http://otn.oracle.com/htmldb
    Good luck,
    - Scott -

  • How to extract information from client security certificates and display it

    Hi guys,
    just wanted to know is it possible to extract information from an digital security certificate and get that displayed on top level navigation of the portal. So for ex. I want to extract the clients name and code and area from where they come from to be displayed on top level.
    thanks
    anton

    RoopeshV wrote:
    Hi,
    The below code shows how to read from txt file and display in the perticular fields.
    Why have you used waveform?
    Regards,
    Roopesh
    There are so many things wrong with this VI, I'm not even sure where to start.
    Hard-coding paths that point to your user folder on the block diagram. What if somebody else tries to run it? They'll get an error. What if somebody tries to run this on Windows 7? They'll get an error. What if somebody tries to run this on a Mac or Linux? They'll get an error.
    Not using Read From Spreadsheet File.
    Use of local variables to populate an array.
    Cannot insert values into an empty array.
    What if there's a line missing from the text file? Now your data will not line up. Your case structure does handle this.
    Also, how does this answer the poster's question?

  • How to extract part of a pdf page and save that as a pdf page on its own?

    I need to extract part of a pdf page. I know how to extract full page, but that is not what I want. I need to extract part of it, ideally, using the mouse to select some rectangular area, and export the selected part to either separate pdf page, or to export to  vector graphics such as .svg
    Is there a tool to allow one to do this? Currently I take screen shot of the page, and use other tools to extract the parts I want. thanks.

    thank you. The crop tools helps. But I am still not sure what to do after I select the area I want. I looked at Acrobat Help | Crop PDF pages
    So, after I select the crop tool and select the area. Now what to do?
    If I double click the cropped area, as the help says, it will just delete everything on the page except the cropped area.
    How do I tell it to either export the selected area to .svg, or save the selected area to a separate one page pdf file?  I do not want to modify the original PDF file, I just want to make a copy of the cropped area, either to .svg image, or to separate pdf file, so I can include that in another document.

  • How to Extract data from a flat file and how to upload it into table

    Hi
    i want to extract the data from a web page, that data i want to keep in text file.
    from the text file i want to read it and i want to upload into table
    can any one help me its very urgent

    here is my 20min try without debugging (needs a rs232 and loopback connector )
    use the probe and highlight the dataflow to see how it works.
    as always:  there are many ways to solve your problem
    Greetings from Germany
    Henrik
    LV since v3.1
    “ground” is a convenient fantasy
    '˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'
    Attachments:
    read write file to RS232.vi ‏69 KB

  • Populating vo from pl/sql procedure and display on the scren in edit mode.

    I want to show data in the page through dynamic vo.For that we have created a vo .inside the VOImpl file I have over write the executeQuery() and inside this method set all the values of the corresponding attributes.but when I run the page no data is comming in the page.Can any body help me to solve the problem.

    Please post your question on the JDeveloper forum since this is not related to JHeadstart.
    I also recommend you use the ADF BC Tester on your app module to test your VO, that is easier than generating a web page to test it.
    Steven Davelaar,
    JHeadstart Team.

  • How to retrieve data from a function module and use it in sap script??

    I have a report program, which calls a function module. This function module internally calls an include program. In this program, I have a variable which is to be used in the sap script. How can I send this variable to the sap script

    Hi,
    In your case, Include prog is part of FM, no need to treat it as an Entity.
    Now, Your Answer -
    In SCRIPT - IN Page Window -->
         PERFORM GET_MVAT_TIN IN PROGRAM Z_SCRIPT_PERFORMS_ABAPDB3
         USING &VBDKR-KUNRE&
         CHANGING &STCD1&
         CHANGING &STCD2&
         ENDPERFORM
         IF &STCD1& <> ' '
         <B>MVAT Number :</> &STCD1&
         ENDIF
    Then go to SE38 --> Creat prog with type - Subroutine pool
    In that Write FORM statement for this PERFORM.
    FORM get_mvat_tin TABLES inttab STRUCTURE itcsy
                             outtab STRUCTURE itcsy.
      DATA : v_kunre TYPE kna1-kunnr,
             v_stcd1 TYPE kna1-stcd1,
             v_stcd2 TYPE kna1-stcd2.
      LOOP AT outtab.
        CLEAR outtab-value.
        MODIFY outtab.
      ENDLOOP.
      READ TABLE inttab INDEX 1.
      v_kunre = inttab-value.
      IF v_kunre CA sy-abcde.
      ELSE.
        UNPACK v_kunre TO v_kunre.
      ENDIF.
       " Here You can take your Funcion module ***************************
      SELECT SINGLE stcd1 stcd2 FROM kna1 INTO (v_stcd1, v_stcd2)
                                         WHERE kunnr = v_kunre.
      IF sy-subrc = 0.
        READ TABLE outtab INDEX 1.
        WRITE v_stcd1 TO outtab-value.
        MODIFY outtab INDEX 1.
        READ TABLE outtab INDEX 2.
        WRITE v_stcd2 TO outtab-value.
        MODIFY outtab INDEX 2.
      ENDIF.
    ENDFORM.                                

  • Creating web service from pl/sql procedure

    Hello.
    I need to create a web service from pl/sql procedure and i chose JDeveloper for this implementation. I have wsdl, but I never created web services. So, I created web service with document/literal message format.
    But I have several troubles:
    1. All element names have lower case letters.
    2. The SOAP envelope must begin from words soapenv:Envelope but i have soap:Envelope.
    3. And operation name has tail like "Element".
    I know bad way for implement 1 and 3 points. It's a modification of java_wsdl_mapping.xml and wsdl files. But if I want to add new method to my service all changes will be cleaned. It's not critical but inconvenient to support.
    But for point 3 i have no ideas.
    This task is very important for me. Can somebody help me?
    JDeveloper 10.1.3.3
    Regards,
    Aleksey

    http://www.oracle.com/technology/obe/obe1013jdev/10131/wsfromplsqlpackage/devwsfrom%20plsql.htm
    Frank

  • How to call javascript function from PL/SQL procedure

    Can anybody advice me how to call javascript function from PL/SQL procedure in APEX?

    Hi,
    I have a requirement to call Javascript function inside a After Submit Process.
    clear requirement below:
    1. User selects set of check boxes [ say user want to save 10 files and ticks 10 checkboxes]
    2. user clicks on "save files" button
    3. Inside a After submit process, in a loop, i want to call a javascript function for each of the file user want to save with the filename as a parameter.
    Hope this clarify U.
    Krishna.

  • How to open report in the browser from PL/SQL procedure

    Hi,
    I need to call the report (with destype = SCREEN) from the PL/SQL procedure and display in the browser.
    For Example: when I call P_call_report procedure in my Forms6i button or at sql*plus, the report output PDF/HTML should open in the Browser window.
    Iam Using IE, report6i, forms 6i, Oracle 8.1.7, Windows OS
    I tried using UTL_HTTP(' ') in a procedure. But when I execute the procedure at sql*plus it says Pl/sql procedure completed successfully message without opening report output in the browser window. If I copy the same url and paste it in the browser, it works.
    Please let me know if there is any solution.
    thanks alot.

    I guess event driven publishing may work. But Iam not sure about the opening of the browser from inside the procedure.

  • How to extract text from a PDF file?

    Hello Suners,
    i need to know how to extract text from a pdf file?
    does anyone know what is the character encoding in pdf file, when i use an input stream to read the file it gives encrypted characters not the original text in the file.
    is there any procedures i should do while reading a pdf file,
    File f=new File("D:/File.pdf");
                   FileReader fr=new FileReader(f);
                   BufferedReader br=new BufferedReader(fr);
                   String s=br.readLine();any help will be deeply appreciated.

    jverd wrote:
    First, you set i once, and then loop without ever changing it. So your loop body will execute either 0 times or infinitely many times, writing the same byte every time. Actually, maybe it'll execute once and then throw an ArrayIndexOutOfBoundsException. That's basic java looping, and you're going to need a firm grip on that before you try to do anything as advanced as PDF reading. the case.oops you are absolutely right that was a silly mistake to forget that,
    Second, what do the docs for getPageContent say? Do they say that it simply gives you the text on the page as if the thing were a simple text doc? I'd be surprised if that's the case.getPageContent return array of bytes so the question will be:
    how to get text from this array? i was thinking of :
        private void jButton1_actionPerformed(ActionEvent e) {
            PdfReader read;
            StringBuffer buff=new StringBuffer();
            try {
                read = new PdfReader("d:/getjobid2727.pdf");
                read.getMetaData();
                byte[] data=read.getPageContent(1);
                int i=0;
                while(i>-1){ 
                    buff.append(data);
    i++;
    String str=buff.toString();
    FileOutputStream fos = new FileOutputStream("D:/test.txt");
    Writer out = new OutputStreamWriter(fos, "UTF8");
    out.write(str);
    out.close();
    read.close();
    } catch (Exception f) {
    f.printStackTrace();
    "D:/test.txt"  hasn't been created!! when i ran the program,
    is my steps right?                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Run report from PL/sql procedure

    Please any one tell how to I run a report from pl/sql procedure.

    I am not sure, but depending on your environment you can create a script to run your PL/SQL code and then generate the report. As is customary in an UNIX environment utilizing shell scripts.

Maybe you are looking for