How to filter UWL workitem based system object

Hi,
My UWL (portal) is connected to ECC,SRM and BW system. I would like to see the workitems in UWL based on system alias(System Object).
Please let me know the procedure to filter work item based on system object

Hi Rajesh,
You can achieve the required functionality using the System Configuration Group parameter. Here's what you need to do -
1. Partition back end systems into groups. This is accomplished by creating additional UWL iView instances, each of which refers to a specific group of backend systems.
The group is defined, using the System Configuration Group iView property.
2. Then use the value of the System Configuration Group property when registering back end systems by placing it in parameter Configuration Group, when you register the SAP system.
For more information refer to the two links below
[http://help.sap.com/saphelp_nw70/helpdata/de/92/a88931f2dd4631b9e8d530697d89c9/content.htm]
[http://help.sap.com/saphelp_nw70/helpdata/de/0a/ad68c125ae496f8c04a25090bd2e3c/content.htm]
Hope it helps,
Prathamesh

Similar Messages

How to filter a report based on count?

Here is my scenario: We would like to report activities on a server if there are multiple date in a month. Here is an example:
Server Date Activity
Server1 7/1/09 Hardware maintenance
Server2 7/1/09 Hardware maintenance
Server2 7/14/09 Software patching
Server2 7/14/09 Server reboot
Server3 7/5/09 Hardware maintenance
Server3 7/5/09 Server reboot
The report will show the following
Server2 7/1/09 Hardware maintenance
Server2 7/14/09 Software patching
Server2 7/14/09 Server reboot
Server1 and Server3 will not show up since there is only one date in July (even though there are two activities for Server3).
I thought of using a report as a filter to a second report. In the first report, find a way to determine which server to report on. But how would I finter the 1st report based on count as the logic stated above?

Hi Max
Our requirement is to see all the activities for a server in a month ONLY IF there are activities on DIFFERENT dates. So using my example, server2 has activties on 7/1 and 7/14. Then we want to see all the activities for server2 in that month. Server3 has two activities but both activities are on the same date. So we don't want to see server3.
Counting by server will not work because that will include server3 in my example.
What I really want is to be able to count unique occurrences of dates per server in a month. And if this count is > 1, then this server will be in the report.
I used a pivot table to count the unique occurrences of dates by server by month. So using my example, I have this result:
Server1-July: 1
Server2-July: 2
Server3-July 1
What I really want (conceptually) is to be able to filter this pivot table by the matrix column which is the count. I just couldn't figure out how to do that :). Then I thought I could use this report (with pivot table result) as a filter into another report.
Hope you have some idea....:)
Thanks

How to trigger a form based on object type and process type

Hi all,
I am new into SRM.. I have been asked to develop a form by cloning an existing standard form..
Using bbp_output_change_sf badi you can trigger the form by passing the object type but the scenario is such that depending on the object type and process type the new form should be triggered.
The parameter iv_object_type passes the object type but how could i pass the process type ?
In the badi I noticed an import parameter is_event that has a field called transction_type that carries the process type but this field never got populated when i checked using debugger.
Please help as to how i can trigger the form based on the object_type and the process_type.
Thanx in advance.

Thanx again Jay Yang.. Well is there any possibility that you could get the items that were confirmed..
Let me eleborate..
Suppose in the PO u order an item for 10 nos and 5 gets confirmed and u return 2..
Well in my case it is that i need to fill up a field Qty returned / Qty confirmed..
I was able to get the number of items from the PO by passing the the passing the parameter to the FM "bbp_pd_conf_getdetaill"
but i dont know how to get the number of items been confirmed..
The quantity field in the line item structure gives me the number of items returned..
Can u tell me how to get the number of items been confirmed....

How to filter data returned by View Object

Hi everyone,
I have a custom View Object that I am using to retrieve some data.
I need to implement some business logic to filter the data before displaying it.
I have to go through the rows returned by the underlying View's SQL and selectively decide which row to display. I have been looking around to find some examples that explain how to achieve what I am trying to do but with no luck.
I would really appreciate if anyone of you could give me some pointers!
Many thanks in advance for your help!
Regards,
Sacha

Hi,
expaining the usecase you want to implement for sure helps answering your question.
From a performance point of view, selecting all data to dismiss them on the middle tier doesn't feel right. E.g. if you want to implement selective data fetching for security then e.g using Virtual Private Database (VPD) with the Oracle DB is a better option. Ideally data that you don't want to displayed shouldn't be queried at all.
Frank

How to filter VO data based on user access

Hello,
Can anyone help me with an approach for the below case.
Once a user logs in, we want to show them a list of various Company(s) and Role(s) that they have access to(this comes from a custom Table).Based on the selection they make here, we would like to filter the data(Here company is very much like ORG_ID in Oracle EBS).So how do I apply this criteria across all VOs once the selection is made so that user sees a specific company data only.Also the Role would be used to enable and disable few fields(regions) on the forms.How do we approach getting this done too.Again as in Oracle EBS,this is more like, SPEL in OAF.
Any help is appreciated.Thnx!
--John.

Hi All,
I have made some progress and but I am stuck with an issue now.Please let me know what am I missing here.
Approach:
1. Once a user logs in, I display the various operating companies that he has access to as a Table region.As he selects a row in this table, I set a pageFlowscope variable.I am able to display the value also as he selects various companies from the table region displayed.
2. Now I created a bounded Task flow(BTF) which has a default method activity(ExecuteWithparams) which would take a company as a paramter(bind var) and I have set this to use the pageFlowscope variable referred above.And after this method it goes to a view which displays data for that company data.
3. Now I dragged and dropped this BTF as a region onto my page.
Problem: When I run the actual page it says "No data to display" in the BTF region. But there is data in the database for that company.How can I fix this issue or what is it that I am doing wrong.Please help.
Thanks,
--John.

How to Filter & Sort on Cached view object data?

We are using JDeveloper 9.0.3.4 and implemeting a Struts/JSP application that query's via view object on one table. Is it possible to sort and order by on the view object's cached data? How does one do this?
Thanks
Natalie

As for filtering rows, there are two ways:
1. In the VO that's sorting data (in my article), you can add logic to skip unmatching rows in the following methods:
protected boolean hasNextForCollection(Object qc)
protected ViewRowImpl createRowFromResultSet(Object qc, ResultSet resultSet)
2. In the base VO (unsorted), you can apply a RowQualifier. For example,
oracle.jbo.server.RowQualifier rowQual = new oracle.jbo.server.RowQualifier("EmpDeptNum = 20");
myVO.setRowQualifier(rowQual);
Thanks.
Sung

Filter list items based on security groups o365

How to filter list items based on security groups in o365.

Hi,
According to your description, my understanding is that you want to filter list items based on the Office 365 security groups.
If that is the case, I suggest you can create a data view to filter the list items with CAML Query like below:
<Where>
<Membership Type="CurrentUserGroups">
<FieldRef Name="VisibleToGroup"/>
</Membership>
</Where>
For more information, please refer the detailed article below:
SharePoint - Filtering a View by Group Membership
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

In BI how to filter the selection options based on inputs on top field

Hi Friends,
In BI, How to filter the selection options based on inputs on top field.
The system should automatically filter the lower level drop downs based on the selection of a higher level.
For e.g. :
If a user selects a Country then the States drop down should only display the State's belongs to the Country. Similarly when a State is selected, the District drop down should display only those District's belongs to the State.
Thanks in Advance.
Regards
Jayaram M

Hi Anil,
Thanks for reply but I couldn't use Compounding Characteristic here. Need some other solution.
Regards
Jayaram M

R12: How to filter Open Item Revaluation Report based on GL Date

Hi,
Anybody know how to filter Open Item Revaluation Report based on GL Date from and GL Date to in R12?
Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included the old data from 8 years ago also.
We need to run the report only for specific date only. Please share with me if anyone know about this.
Thanks.

Pl do not post duplicates - R12: How to filter Open Item Revaluation Report based on GL Date

R12: How to filter AP and PO Accrual Reconciliation Report based on GL Date

Hi,
Anybody know how to filter AP and PO Accrual Reconciliation Report based on GL Date from and GL Date to in R12?
Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included the old data from 8 years ago also.
We need to run the report only for specific date only. Please share with me if anyone know about this.
Thanks.

In 12 you can rebuild and run the report for a particular period, but not a single day if that's what's required

How to create a record based on the name of a file in the file-system?

Hi,
With a lot of pictures I want to have a database to gather some information about these pictures.
First question is how to generate a record based on a file in the file system?
e.g. the pictures are "c:\fotos\2009\01\disc_001.jpg" to "c:\foto\2009\01\dis_98.jpg" .
now i want to create records with as one of the attributes the name of the picture (not the picture itself). how to create these records (based on the information of the file-ssytem). i.e. the number of records should be the same as the number of pictures.
any suggestions?
any reaction will be appreciated.
Leo

Link to Create directory
http://www.adp-gmbh.ch/ora/sql/create_directory.html
You can create a list of files in the directory and read the list files from that directory.
[UTL_FILE Documentation |http://download.oracle.com/docs/cd/B14117_01/appdev.101/b10802/u_file.htm#996728]
[Solution using Java|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:439619916584]
SS

How to filter the Rest Api data based on Taxanomy columns

Hi Everyone,
We are using SharePoint2010 Standard Edition.
I wanted get the library details through REST Api. I am using as below:
https://SiteUrl/_vti_bin/listdata.svc/Documents?$filter=Title eq 'SharePointDoc'
Here I am able to get the info regarding "SharePointDoc". But when I am trying to get the details from Taxonomy filter, it didn't.
Can anyone please tell me how can we filter based on Taxanomy fields.
Thanks in Advance
Krishnasandeep

Hi,
I understand that you wanted to filter the Rest Api data based on Taxanomy columns.
Per my knowledge, in SharePoint 2010 , not all types of column are available via REST, most annoyingly managed metadata columns are amongst this group of unsupported column types.
However, in SharePoint 2013, we can filter list items based on taxonomy (managed metadata) columns.
Taxonomy fields can be now called via REST API using CAML query in REST calls.
Here is a great blog for your reference:
http://www.cleverworkarounds.com/2013/09/23/how-to-filter-on-a-managed-metadata-column-via-rest-in-sharepoint-2013/comment-page-1/
You’d better to change the REST calls and the CAML query to check whether it works in SharePoint 2010.
More information:
http://platinumdogs.me/2013/03/14/sharepoint-adventures-with-the-rest-api-part-1/
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to create a system object in portal that points to a web dispatcher

Hi,
How do we create a system object in the portal for a web dispatcher? The web dispatcher in turn points to an ECC system. The path for communication is EP>Web Dispatcher>ECC
Regards,
Sridevi

Hi,
Connection test for the following succeeded:
1. SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (mtw02spwp02:80)
5. The host name mtw02spwp02 was resolved successfully.
6. The Web AS ping service http://mtw02spwp02:80/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
7. An HTTP/S connection to http://mtw02spwp02:80/sap/bc/bsp/sap was obtained successfully.
2. ITS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Checks if the host name of the server can be resolved.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (mtw02spwp02:80)
6. The host name mtw02spwp02 was resolved successfully.
7. An HTTP/S connection to http://mtw02spwp02:80/sap/bc/gui/sap/its/webgui was obtained successfully.
Next test for SSO failed:
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Regards,
Sridevi

TS3276 Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have

Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have it set on my Mac.

Brightbleu wrote:
Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have it set on my Mac.
Winmail.data are not usable files. They just preserve RTF within the message.
http://support.microsoft.com/kb/278061
Cheers
Pete

How to use session cookie property of System object?

Hi all,
I have searched all over the SDN but didnt get anything relevent so here i am posting my query...
My scenario is as follows:
I have created a KM document iview that launches an HTML page, on click of button of HTML page a VC iview is launched. On this iview i have a button that hits BI query.
PS: A system object is created for the connectivity bet portal and backend BI server.
PS: i have configured SSO between portal and backend.
Now when i click on button on iview that fetches the data from backend, i am asked for authentication pop-up, although i have configured SSO why i am asked to enter UID and PWD again??
In system object there is a property named
<b>"session cookie = MYSAPSSO2"</b>
So should i use this property so that cookie will get transfered from one session to other session when i click button on iview??
If yes then HOW??
Is there any other setting remained in Visual Admin?? or Backend or portal?
What could be the missing??
PS: User id are same on portal & backend.
Any help will be highly appreciated...
Regards,
Ameya
Thanks in advance
Message was edited by:
Ameya Pimpalgaonkar
null
Message was edited by:
Ameya Pimpalgaonkar

Hi Ameya,
I do not know the exact answer.However you should look for something called JSESSION ID.
Have a look at the thread:
Re: Problems Using Application Integrator for BSP Application
Reg SSO Logon Tickets and Browser sessions
How to use jsessionid while making HTTP calls??
Hope you find something which can help you.
Regards
Atul Shrivastava

How to filter UWL workitem based system object

Similar Messages

Maybe you are looking for